Photoshop does not detect my driver's license (plan of photography)

Similar Questions

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!

• Hello, my adobe ID does not recognize my driver's license. Can you help me.

  Hello, my adobe ID does not recognize my driver's license. Can you help me.

  Hello

  I checked with your Adobe ID on the forums there is no product approved in this regard, please let me know if you have any other Adobe ID in a personal message.

  Kind regards

  Bani

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• w540 does not detect DVD drive

  W540 does not detect the CD / DVD drive and because it takes a long time to start.

  I know that I can put the hard drive to boot first, but now I want to install windows 7 and it does not start.
  I have already installed the latest version of the BIOS but does not solve everything.

  I wonder what's happening?

  Thank for the help that you can give me.

  I discovered why the player start out with reinstalling windows DVD.
  According to the manual, so that the operating system Windows 8 and Windows 8.1 work, Secure Boot function must be activated. Similarly, restarting the OS Optimized Defaults menu must be activated and when this setting is changed, some BIOS settings are changed automatically including the UEFI / Legacy Boot happening to UEFI. We need to change the UEFI / Legacy Boot for both, only then can start the DVD from the drive.

  I thank ColonelONeill for your help.

• my hp windows does not detect a driver controller ethernet/what should I do?

  I was recently remove things from my desktop under Add or remove programs section and I think I have acidently deleted my ethernet controller drivers, I think, and now when rise I have internet access or try it say that its does not detect any wired or wireless internet cards... Please help me im in College and I really need my computer work If it wasn't for my cell phone, I would have the same power to send this, thanks again and trully appreciate your help.

  I was recently remove things from my desktop under Add or remove programs section and I think I have acidently deleted my ethernet controller drivers, I think, and now when rise I have internet access or try it say that its does not detect any wired or wireless internet cards... Please help me im in College and I really need my computer work If it wasn't for my cell phone, I would have the same power to send this, thanks again and trully appreciate your help.

  You need to understand what the material is, visit the web page of the manufacturer (on another machine), download the software (drivers) for the hardware in the machine, copy it on this machine (USB key, etc.) and install.

• Satellite A205-S5880 (PSAE3U) downgrade Vista to XP - does not detect HARD drive

  Hi all
  I got this hair loss situation, I had a satellite A205 - S5880 (PSAE3U) and decided to downgrade to XP, I got all ready drivers for XP (I have the EMEA support site and the wireless from a Czech website), I have my windows XP SP2 g CD and I get after loading everything Since the CD that my HD is not detected or not recognized and it tells me to make sure I have connected (I know I do).

  After doing a search of loong on the web, I discovered I have need the drivers (or something like that) to my HD which is a Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA). My bios won't let me put my SATA to IDE (or something like that) also to update and nothing, please I need my Windows XP CD to read my HARD drive, and I can take care of the rest (at least I think so, otherwise I'll ask again: D).

  I also found that I can watch my motherboard chipset for motherboard for my HD controller, it ' s (i think) a toshiba ILHAM v1.00 or Intel Crestline - GM GM965.
  Maybe this info also works: Intel ICH8M

  I would totally be apreciate all the help, thanks in advance. I am able to give any other information you want
  in any case here is a summary of my pc with everest
  ================================================== ================================================== ========================
  SUMMARY OF EVEREST
  ================================================== ================================================== ========================
  Computer
  Computer Type ACPI (Mobile) 86 x PC
  Operating system Microsoft Windows Vista Home Premium
  OS Service Pack Service Pack 1
  Internet Explorer 7.0.6001.18000
  DirectX DirectX 10.0
  Computer name USER-PC
  Name of the user
  Domain logon user-PC
  Date / time 2009-05-02 / 21:37

  Motherboard
  CPU type Mobile DualCore Intel Pentium, 1866 MHz (14 x 133)
  Card mother name Toshiba Satellite A205
  Motherboard chipset Intel Crestline - GM GM965
  Memory system 3061 MB (DDR2 - 667 DDR2 SDRAM)
  DIMM1: Micron Tech 16HTF25664HY-667E1 2 GB DDR2 - 667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  DIMM3: Hynix HYMP112S64CP6-Y5 1 GB DDR2-667 DDR2 SDRAM (5-5-5-15 @ 333 MHz) (4-4-4-12 @ 266 MHz) (3-3-3-9 @ 200 MHz)
  Type of Phoenix BIOS (15/05/08)

  Display
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Video card Mobile Intel (r) 965 Express Chipset Family (448 MB)
  Accelerator 3D Intel GMA X 3100
  Monitor monitor generic PnP [NoDB]

  Multimedia
  Audio adapter Realtek ALC268 @ Intel 82801HBM ICH8M - High Definition Audio Controller

  Storage
  Controller IDE controller Intel(r) ICH8M SATA AHCI - 2829
  Controller IDE Intel(r) ICH8M Ultra ATA Storage Controllers - 2850
  IDE controller Texas Instruments PCIxx12 Integrated FlashMedia Controller
  Storage controller Microsoft iSCSI Initiator
  Hard drive Hitachi HTS542520K9SA00 ATA Device (200 GB, 5400 RPM, SATA)
  Optical drive MAST * a DVD-RAM UJ-850 s ATA Device (DVD + R9: 4 x, DVD - R9:4 x, DVD + RW: 8 x / 8 x, DVD - RW:8 x / 6 x, DVD - RAM: 5 x, DVD - ROM: 8 x, CD:24 x / 16 x / 24 x DVD + RW/DVD-RW/DVD-RAM)
  Hard disks SMART Status OK

  Partitions
  C: (NTFS) 125915 MB (102380 MB free)
  D: (NTFS) 64863 MB (12885 MB free)
  Total size 186,3 (112.6 free go-go)

  Entry
  Standard PS/2 keyboard keyboard
  Alps Pointing-device mouse

  Network
  Main IP 192.168.0.199
  00-1B-9E-FB-8B-DF main MAC address
  Atheros AR5007EG network (192.168.0.199) adapter wireless network card
  Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.0) network card
  TOSHIBA Software Modem modem

  Devices
  Printer Microsoft XPS Document Writer
  Printer send to OneNote 2007
  Controller FireWire Texas Instruments OHCI Compliant IEEE 1394 Host Controller (PHY: TI TSB41AB1/2)
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB1 Controller Intel 82801HBM ICH8M - USB universal host controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB2 Controller Intel 82801HBM ICH8M - USB2 Enhanced Host Controller
  USB camera Chicony USB 2.0 Camera
  USB device USB Composite device
  Battery Microsoft AC adapt
  Battery Microsoft ACPI battery compatible control method

  DMI
  Provider DMI BIOS TOSHIBA
  DMI BIOS Version V5.60
  TOSHIBA DMI system manufacturer
  DMI system product Satellite A205
  DMI system Version PSAE3U-08C023
  DMI 68221541 K-system serial number
  DMI system UUID EA88852C-3BD111DD-968C001E-EC3CB59A
  DMI Motherboard manufacturer TOSHIBA
  DMI Motherboard product ILHAM
  DMI Motherboard Version 1.00
  DMI Motherboard Serial number 0123456789AB
  TOSHIBA DMI chassis manufacturer
  DMI chassis Version n/a
  DMI chassis serial number, no
  DMI chassis asset tag *.
  DMI chassis Type Notebook

  ================================================== ================================================== ========================

  Hello!

  You will find hundreds of discussions here in the forum about this, if you install Windows XP and Vista from a Microsoft disc and the HARD drive can't be detected... So he s strange to read these questions again and again.

  However, to install Windows, you need the SATA drivers or let's say the Intel Storage Manager package. It contains the driver you need. You can then create a new installation using nLite [www.nliteos.com]
  Or look you at this Toshiba document: http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm

  Good bye

• 15 - f039wm: BIOS does not detect hard drives until it performs a diagnostic search

  I was handed a 15-f039wm laptop to watch and I recognized immediately the hard drive was bad, complete failure - no detection and would not pass the built-in diagnostics. I have removed the drive from the laptop and confirmed that the car was bad on a separate system. I ordered a new drive, went with an SSD and put the new drive of the laptop. I checked the cable was sitting correctly on both ends and for good measure he reinstalled on the motherboard as well as on the drive itself.

  Then I tried to re - install Windows 8.1 with the laptop provided with Bing, but when it came time to select the hard disk in the Windows Installer screen, no disks have been detected. I tried to load the drivers for the drive recognized, but nothing has worked. I then tried to start other diskettes of Windows (7 & 10) and the same problem arose, no drive detected. For fun, I loaded Hiren's Boot Disk and tried to see what I could do, and oddly enough the drive detected several times.

  Then, I decided to go back to the integrated diagnostic tools (F2 at startup) and see what would happen. Hard drive has been detected and passed the Quick Test. I have a Windows install CD in and after that I left the screen he ended up launching the installation disc. I decided to try just a new set of drivers to see if the disc could be detected, but that the disc was already detected and just sitting there, ready for the installation of the software.

  I have installed 8.1 on it and did the upgrade of Windows 10 to the owner and I noticed something serious.  Whenever I restarted (key here being a full reboot), the drive was not detected and I would get an error in DEVICE of START-UP INACCESSIBLE when he tried to load Windows. I ended up to play with the drive and launch the troubleshooting menus command prompt.

  I tried to run diskpart, and when I typed "list disk" inside diskpart and he told me that there are no drives found. Large.

  I took once more apart from the laptop and reinstall the drive again and the same problem happens again. This is where it gets a little weird. I ran Diagnostics on the hard drive again and just canceled check out out and Quick Test and let it boot. It starts very well.

  I thought so at this stage it is a bug in the BIOS or something and decided to flash F.25 Rev.A to see if that would help. No, the problem persists after BIOS update flash. I decided to just go ahead and order a new cable to see if the cable is the issue. Is there anything else I can try? Anyone have this problem, it is rather strange to me, and I saw a lot of machines to act strangely.

  So, to summarize:

  Hard drive is not detected at least that I force diagnostic analysis of any type on the hard drive and come out and let it boot.

  What I tried:

  New hard drive

  Reconnect the hard drive

  BIOS settings - boot order, security keys allowed Secure Boot on / off, Legacy Boot on / off, (there no option of detection or ahci in the BIOS).

   

  Many windows install environments, non-windows - disk environments is ever detected by the BIOS, I guess

   

  Flashed the BIOS updated

  Reinstall Windows (back to 8.1 with Bing and question persists, persists on Windows 10 institutions)

   

  DiskPart on Windows Installer (shift + f10 - prompt "diskpart" command, then in diskpart: 'list disk' which wouldn't say no disk).

   

  Ordered a new cable (pending on this one)

  What gets me, is that it works whenever I have diagnostic scan before starting. Every time. It fails on a restart cold without doing so. I looked on the Board for the damage of physical strength and the liquid, but do not see anything to really. I'm guessing that it was abandoned. Any ideas on what else to try? I'm running out of ideas on this one.

  Try the new cable, but I think you look a very bad mother board it.

• Satellite A300-1EI: Debian Linux does not detect DVD drive

  Hello guys,.

  I am trying to install Debian debian-40r5, but the first issue I encountered is that the DVD is not detected correctly and the system setup program is not loaded.
  What happens is...

  1. start the program installation of Linux and its load.
  2. I am invited for selections of region/language/KB. Then when debian tries to detect the drives, the dvd is not detected, and I am asked to load the driver manually. I tried to load the drivers in the installer, but without success.

  If anyone knows how to load the appropriate driver, please me advice.

  Thanks in advance,
  Ahmed Osama

  Thanks for the comments!

• Tecra S1 - Bios does not detect HARD drive

  Hi, first time poster, long drive date.

  I have a friends laptop with me an old S1, its hard drive has failed. (Even tried it on my USB adapter to diagnose).

  I had another IDE HDD which works like a dream.
  I can even install Windows up to a point with the exception of when the computer wants to do the first restart of the second phase of the installation. (Not on CD).

  In the bios the HARD drive is not detected a 0 MB for the read command.
  I tested the USB HARD drive. So works perfectly. will try another hard drive there tomorrow see what is happening.

  I tried the recovery CD aswell. But she also can not detect the hard drive.
  Finally, I even reflashed the Bios even if it was the last version 2.50.
  Still did not change.

  If I'm just at a loss here. Tomorrow I'll do the following.

  Try a 3rd HDD IDE into the machine.

  Opening of the case and see if I can find the CMOS battery to replace or remove for a minute or 2 to see what is happening.
  Is obviously a problem of bios of the HARD drive is detected. Has anyone ever encountered this before?

  Windows / ERD Commander / Partition Magic 8 all finding the end hard drive.
  Thanks for listening to my dribble that I feel like I'm banging my head against a wall being close.

  Kind regards

  Dave

  What drive did you use and what size it it?
  I think that not all HARD drive would be compatible because of the 28-bit LBA.

  The 28-bit LBA supports hard disks up to 128GB and if the IDE controller supports only 28-bit LBA then it may happen that more large drives would not be recognized by the BIOS.

• Photoshop does not detect nVidia Quadro K2100M

  I have a Lenovo Thinkpad W540 with nVidia Quadro K2100M updated with the latest drivers (03/12/2015 10.18.13.5456). Photoshop CC 2015.1.1 is "unable to detect information" in Preferences > performance > settings of the graphics processor. "Photoshop has detected an error in your display driver. This prevents the full functionality of work plans, such as changing the background color of what so I can see my boundries work plan.

  Chatted with support and they sniffer.exe moved out of the folder of Photoshop. This allowed me to activate the chart and change the background color of artboard, but greatly increase time to start Photoshop and introduces problems gel during various operations.

  That can be done to have Photoshop work well with my graphics card?

  Hi g6126733,

  Greetings.

  • Check and check again if you run the latest version of the graphics card.
    • Drivers | GeForce
  • Add Photoshop.exe and sniffer manually from the control panel in the Nvidia settings.
    • Assignment of a graphics card for an application with NVIDIA Optimus

  Concerning

  Rohit

• Photoshop does not detect OpenGL?

  Yesterday while at the beginning, I realized one of my partitions had suddenly disappeared - as well as 300 concerts of allocated space. Rather that to search high and low for a reason or a solution to the problem, I decided to just do a clean install factory of my system and start again.

  After you have applied all the updates of Windows that I could possibly find, I reinstall my apps creative cloud (including Ps, AI and Id). For some reason, I can't get my OpenGL functions to work now-, they worked very well before the reinstall. When I visit Edit > Preferences > performance > advanced Photoshop settings I see Mode design set to 'Basic' and grey, who also gray on the checkboxes for "use graphics processor to accelerate Computation" and "Use OpenCL."

  I downloaded the latest drivers I could find both the OEM and the manufacturer of the graphics card. I even installed a utility called OpenGL Extensions Viewer, which helped determine that I use OpenGL ver 2.1. I am really confused at this point.

  

  Not a bug of software - something is wrong with your driver, else GL would be activated.

  Yet once, you need to update this driver.

• Windows does not detect a driver for my network card

  Hello. I am trying to understand what driver should I install for a network card on a HP 2000-219DX laptop. I saw the list of the drivers for it and got the file of the driver Ralink 802.11 b/g/n WiFi Adapter from another PC. I don't know how to install this or if I have to use another driver altogether. What should I do?

  Hello:

  You need this graphics driver for your configuration.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101979-1&cc=us&DLC=en&LC=en&OS=4063&product=5118697&sw_lang=

  If you see a device called SMBus Controller in your device manager, you must install the drivers for the AMD Chipset.

  Download and install the first file in the list at the link below.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• CC 2015 update does not recognize my driver's license.

  I have my CC apps on both computers. On ONE computer, CC continues to tell me that my "trial will finish in X number of days." Happened when I updated to 2015 for CC. How can I do understand that I already have a license?

  Hello

  Please visit:-https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  Hope this helps!

• Windows 8 Setup does not detect hard drive Vmware

  When installing, it says no hard drive found...

  What can I do about it?

  It's the Windows 8.1...

  Without knowing the configuration of the virtual machine (this is why I asked for the log file) it is difficult to say what is causing the problem and how to solve.

  André