Photoshop does not detect nVidia Quadro K2100M

Similar Questions

• 2015 CC Photoshop does not recognize nvidia gt630m

  Hello.

  I know it's a common question but I want to use all the power of my laptop.

  So my laptop based on the Core i3 - 3110 m cpu and nvidia geforce gt630m gpu 2 GB, 8 GB of ram. 8.1 Windows x 64

  application version - Adobe Photoshop Version: 2015.1.2 20160113.r.355 x 64

  version of the nvidia driver is 364.72

  All the drivers are up to date.

  The problem is Photoshop does not recognize the gpu nvidia and uses only integrated intel hd 4000 instead.

  

  Well, I tried to manually select the gpu from nvidia Control Panel

  

  and when I did - Photoshop not just recognition gpu, empty empty preference section:

  

  also in these cases I get an error when you open any image:

  

  According to official information, my gpu (nvidia 600series) has been tested and should work fine.

  Well, I found a solution in the forum of nvidia, but it's barbaric and disabled-switching automatic of the gpu on the entire system.

  In addition, in Lightroom, all is ok:

  

  I thank you for the attention, hope that my problem would be solved.

  Well, ok, adobe support cannot resolve this problem, I got it.

  I tried many things and spent some time on it. Program running as administrator, choosing gpu in nvidia Control Panel, install different versions of the drivers and all with cleaning system and the registry. Everything was useless. But.

  I found the solution.

  I have uninstall Adobe Photoshop CC 2015.1.2 (20160113.r.355) - clean registry and install the previous version - Adobe Photoshop CC 2015 (20150722.r.168).

  Figures that newest version of PS work well with nvidia gt 630 m, perhaps, it has not been tested at all.

  He can hardly qualified as a solution but now Photoshop sees my gpu at least.

  

  Hope Adobe will fix this problem in the new version of Photoshop. Maybe this can help someone.

  Best regards, wire.

• Photoshop does not detect my driver's license (plan of photography)

  I bought the plan of photography that contains Photoshop and Lightroom PS.

  When I run Photoshop it does not detect my plan and begins to work in mode test with the offer 'buy now '.

  If I click on that I'm listed on the site, where my photography plan is apparently activated.

  The two do not seem to apply to the other, what should I do?

  I used the Adobe CC cleaner to remove all the files, but still no luck. The problem seems to be with my account.

  Thank you for answering,

  There was a problem with the Windows 10 hosts file.

  I managed to find a way to solve the problem by following this guide: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

• Photoshop does not detect OpenGL?

  Yesterday while at the beginning, I realized one of my partitions had suddenly disappeared - as well as 300 concerts of allocated space. Rather that to search high and low for a reason or a solution to the problem, I decided to just do a clean install factory of my system and start again.

  After you have applied all the updates of Windows that I could possibly find, I reinstall my apps creative cloud (including Ps, AI and Id). For some reason, I can't get my OpenGL functions to work now-, they worked very well before the reinstall. When I visit Edit > Preferences > performance > advanced Photoshop settings I see Mode design set to 'Basic' and grey, who also gray on the checkboxes for "use graphics processor to accelerate Computation" and "Use OpenCL."

  I downloaded the latest drivers I could find both the OEM and the manufacturer of the graphics card. I even installed a utility called OpenGL Extensions Viewer, which helped determine that I use OpenGL ver 2.1. I am really confused at this point.

  

  Not a bug of software - something is wrong with your driver, else GL would be activated.

  Yet once, you need to update this driver.

• LR3 does not detected Photoshop CS5

  Suddenly LR3 does not detect my newly installed Photoshop CS5. He detected very well yesterday, but today all the options to edit in > menu are gray except Photomatix. Photoshop opens and works fine by itself.

  Any ideas would be great... I really hope that I will not have to reinstall Lightroom.

  These are the recommended procedures to solve your problem. Dazs, reinstall the PS is the first to go, but you can try editing the registry first.

  Gossweiler beat

  Switzerland

• Upgrade HP 8570w with NVIDIA Quadro K2100M

  Hi, I have a HP 8570w and recently I bought a NVIDIA Quadro K2100M (N15P-Q3-A1).

  I installed the graphics card in my HP 8570w but the screen is not working, it stays black.
  I reinstalled the original video card K1000M and everything works fine, so I don't know if the new K2100M graphics card is broken or if I have to do something to make it work (for example to update or change the configuration of the bios).
  I have the latest version of the Bios (version F.43 68IAV 08/10/2013), what I have to do?
  Kind regards.

  The ebay seller told me that he starts flashing the video bios of the K2100M with a compatible vbios HP to solve the problem of incompatibility.

  I will inform you if this solution won't work...

• Windows 7 does not detect external monitor!

  Hi I have a huge dilemma!

  My laptop does not recognize the external monitor. Earlier in the day, he detected the external monitor and perfectly well worked through to extend, in doubles, you name it. However, after restarting my computer, I was unable to get the external display to be recognized...

  I use a laptop Lenovo y470 and nvidia gt 550 m 64-bit. I've updated the grahpics card but in vain...

  The way I have it plugged into the external monitor is using a hdmi cable to connect the laptop to a monitor for a DVI-HDMI adapter. Basically, the dvi port became a port hdmi with this adapter.  its dvi - d.

  I think that restarting the computer developed a few updates and the graphics card only connects via VGA or HDMI and DVI not? I'm not sure... I'd love any idea of a solution.

  Hello

  If you do not see an option named multiple displays in your display settings, then Windows isn't detecting a second monitor plugged into your desktop computer. Or else, it does not detect an external monitor plugged into your laptop. When Windows detects this monitor, it will appear in the drop-down list next to the screen. If you do not see that what listed there, try click on Detect.

  Make sure that the monitor you want to extend your desktop is turned on and plugged the correct video port on your computer. You may also need to select the correct source labeled on the controls of your monitor to ensure that the monitor is using the correct video port. For more information, consult the manual of your monitor or go to the manufacturer's Web site.

  Method 1:

  For more details, see the following articles:

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Method 2:

  I suggest you to check the history of update for the recently installed updates.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Method 3:

  I suggest to see the link and try to run the troubleshooter and check if it helps:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 4:

  I suggest that you try to do a system restore and check whether the problem is resolved.

  In Windows 7 system restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

• 2015 CC Photoshop does not recognize the graphics card GeForce 850 M

  The NVIDIA Control Panel settings do not solve the problem. When I use global settings, Photoshop recognize only the Intel card:

  

  
  

  
  

  And when I put "High Perfomance... ", Photoshop does not recognize the graphics processor (the processor settings graphic is completely disable):

  
  

  
  

  Adobe Photoshop CC GPU (graphics processing unit) and card FAQ video

• Photoshop does not recognize my card 960graphic GeForce GTX

  Hello

  I need help on my graphics (GTX 960). Everything's fine (yesterday until I update an extension called FlatIcon (Fi)). I used it for a long time and nothing wrong. Now, Photoshop does not recognize my card. I updated the driver NVIDIA, photoshop set to run as a high performance with NVIDIA Control Panel, remove FlatIcon extension, reset prerefences (Alt + Ctrl + Shift), increase the size of the Scratch drive (200 GB free now), but without hope. I hope someone can help me solve this problem, thank you 1 million.

  Wood

  Can you have a think when this started.  Could he have when you went from CC2014 to CC2015 for example?  CC2015 makes the best use of the GPU acceleration and seems to be more picky about the material.

  You are not able to check the use of GPU acceleration at all, or simply not advanced drawing mode?

  What driver version are you using?

  FWIIW, my experience with a GTX970 was that I could only use Basic Drawing mode in CC2014, but it suddenly allowed me to set the mode advanced for awhile and then changed me back to the basic mode when I upgraded to CC2015

  353,3 get mode advanced for a short period, but it passed without known reason.

  

  Displays how do you drive?

  You have only a GTX960?

• AE2014 does not recognize the Quadro 4200 with Tesla K20.

  Hello.

  AE2014 does not recognize the Quadro 4200 with Tesla K20. As I see in this data sheet system requirements | After Effects, these devices are not listed as capable. Is any chance to make it work? Can I install a special Nvidia driver or something?

  Thank you in advance.

  The answer for the K4200 is the same as that given for the K2200 here:

  Impossible to activate CUDA on Quadro K2200

• After Effects does not support the Quadro K4200

  Effects CC 2014 runs on Windows 7 64 bit.

  I installed the latest driver... After Effects does not support the Quadro K4200

  Here is a copy of the parameter of GPU in AE.

  You can solve this problem?

  

  Quick project: available

  Texture memory: 2048,00 MB

  Ray-tracing: GPU (not supported)

  Not support GPU enabled for CUDA acceleration

  OpenGL

  Provider: NVIDIA Corporation

  Feature: Quadro K4200/PCIe/SSE2

  Version: 2.1.2

  Total memory: 3.93 GB

  Shader Model: 4.0 or later

  CUDA

  Driver version: 6.5

  Features: 1 (Quadro K4200) (not supported)

  The current usable memory: 3.67 GB (at the launch of the application)

  Maximum usable memory: 4.00 GB

  Do you mean that After Effects is not using your GPU to accelerate the raytraced render engine even when you check the box?

  Or are you simply ask the AE team to add official support for your GPU for the ray-traced rendering engine?

  If it's the second, nevermind. The AE team has stopped all development on the ray-traced rendering engine. She is considered to be obsolete. They are working on better integration with C4D: Details of CINEMA 4 d with After Effects integration the fact that it comes free with AE is pretty cool.

  However, if this is the first very well; We're going to solve! What number of exact version of AE are you using? (13.0.1? 13.1.0? 13.1.1?) How much time does it take to render when you switch the CPU, and then how much time does it take when you switch GPU with the box checked?

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.