LR3 does not detected Photoshop CS5

Similar Questions

• Image displays does not correctly Photoshop CS5 Extended V 12.1. (Same file OK in PS Elements)

  I'm having a problem with Photoshop CS5 Extended V 12.1.

  The problem:

  When I open some files, certain shades of the color BLUE appears as BLACK

  However, the same file opens and displays correctly if I open Photoshop elements V9.0.3.

  When I download the file in JPEG and re - open, the problem returns.

  Open the JPEG file in another application, including PS Elements, cause no problem

  Source files

  The original files is from a Nikon camera, in RAW format saved. It is possible that the original files have been corrupted somehow as the shots had an unusual blue cast - that was easily resolved by Photoshop, when I open the RAW files. However, I'm not sure.

  The problem is not universal because I was not able to reproduce it with all the other files (RAW or JPEG).

  I calibrated my monitor display sRGB IEC61966 - 2.1 (default) settings

  Other information:

  Adobe Photoshop Version: 12.1

  Operating system: Windows 7 64-bitVersion: 6.1 Service Pack 1

  System architecture: Intel CPU

  Family: 6

  Model: 10,

  Step by step: 9 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2 FP

  Number of physical processors: 8

  Processor speed: 3395 MHz

  Built-in memory: 8153 MB

  Free memory: 5089 MB

  Memory available to Photoshop: 7147 MB

  Memory used by Photoshop: 60%

  Tile image size: 128K

  Thank you, Conroy, you are absolutely right. The RGB 0.255.255 layer has cause a black screen. I am very grateful to you.

  I had updated the driver about a month ago, when I had a new monior and had assumed that I had the latest version. Clearly, I was wrong.

• Photoshop does not detect my driver's license (plan of photography)

  I bought the plan of photography that contains Photoshop and Lightroom PS.

  When I run Photoshop it does not detect my plan and begins to work in mode test with the offer 'buy now '.

  If I click on that I'm listed on the site, where my photography plan is apparently activated.

  The two do not seem to apply to the other, what should I do?

  I used the Adobe CC cleaner to remove all the files, but still no luck. The problem seems to be with my account.

  Thank you for answering,

  There was a problem with the Windows 10 hosts file.

  I managed to find a way to solve the problem by following this guide: https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

• Windows "open with...". ' does not not for Photoshop/CS5.5

  I use the command "open with...". "in the context menu of Windows all the time opening .jpg and other image files in Photoshop. I don't want to directly associate .jpgs, etc., with Photoshop, because most of the time that I want to just quickly view in Windows Photo Viewer. But from time to time, when I need to open one in PS, so I had been using the menu command 'open with... '. ». It worked well in every version of CS I've ever used.

  Until, all of a sudden, when I installed CS5.5, 'open with... '. "no longer works. Right click on a .jpg file, for example, does not even Photoshop as a valid option for a request for opening of the file (not in the list "Recommended programs" or the "other programs" list). So I have to go and look for a 'additional program '. I use Windows 7 64-bit, but if I choose the photoshop.exe in Program Files or Program Files (x 86), the jpg still comes to open in the default application (Windows Photo Viewer).

  Even for a PDF (opening in Photoshop or Illustrator).

  PSD open directly, although, when I double-click the file.

  This really seems a matter of CS, since 'Open with' still works fine for other non Adobe applications.

  How can I get my menu 'Open with' to 'review' Photoshop as a valid option and pass the file name correctly so that it actually opens the file?

  Anyone have any ideas?

  Thank you very much!

  Nope. I had done so many times, and he never "stuck". No matter how many times I've traveled to exe, if I always checked off 'using the program selected... '. "or not, the jpg file still open in Photo Viewer.

  It turns out that this thread has shown on the widget more 'like that' to the right of these forums when I presented my post, and who responded to my question. Why the wire never showed up when I was actually looking for a response, I'll never know.

  According to the guidelines of this thread, you have to go and manually set/update the registry key

  HKEY_CLASSES_ROOT\Applications\Photoshop.exe\shell\open\command

  to point to the path of the most recent Photoshop (in my case, C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit) \Photoshop.exe). I guess it's something that the CS5.5 installer can't do in certain circumstances. He was always pointing the way to my CS5, which was no longer valid.

• camera raw 7.2 does not settle in CS5.5, but need to read the P7700 nrw files.

  camera raw 7.2 does not settle in CS5.5, but need to read the P7700 nrw files. Not to mention that DNG Converter, what can I do to use the files directly?

  Your next option is upgraded photoshop. If you don't handle the full version (less than $20 / month) you get elements, it uses the latest version of camera raw, but I think it's a lighter version but.

• My mac does not detect my hard drive after the upgrade. How to solve this problem?

  My mac does not detect my hard drive after upgrading to Mac OS Sierra. How to solve this problem?

  Please provide more detailed information. You can read write an effective communities of Apple support question. Maybe you could open disk utility and take a screen snap so that we can see what you see.

  To post a screenshot

  1. Press command + shift + 4, that will change the cursor to the line of sight.
  2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
  3. Release the mouse button and the image will be saved on your desktop.
  4. Click on the camera icon in the toolbar of the message forum Editor.
  5. Drag the image on the button select a file and click the Insert button.

• does not detect external hard disk

  Hey guys

  Recently I update my macbook pro (2014) in the sierra of mac os. Since then, my mac does not detect any external hard drive I plug in it even if these drives are detected by the PC and all the files inside. I tried to open utility disk where the hard drive is displayed but the 'volume' located below is gray. When I try to hit mount said volume that nothing happens. All I could do to fix this?

  Thank you in advance.

  Hi sgerolio,

  I understand that you are unable to detect any external drive that you plug into your MacBook Pro, since you upgraded to macOS Sierra.  How many external hard drives work?  How they are formatted?   If formatted for PC, they would not necessarily be able to be read by a Mac.

  You have a small empty external drive or USB key that you can test?  Formatted in Mac OS extended (journaled).  Using the Finder, you are able to see the external drive and drag a file to it?

  The title of the article includes the Aperture application but apply these tips to format an external hard drive to any software application.

  Drives external format Mac OS extended before using with opening

  Take care.

• Does not detect the hdmi cable more (very specific scenario)

  Well then...

  Got a monitor 15-HD to hdmi cable and a mac laptop (13 in the retina).

  So when I got all that I put it all together and it worked. I left because there a little bit, everything is plugged in and did not return for some time, so my mac fell asleep at the time wherever I went. Disconnected everything to relax on the couch. I went back and all plugged together again except that now the mac does not detect the cable. Tried a bunch of things with it. Restart, unplug the unit, detection manually, etc...

  Since the monitor is used and recently purchased cable, I thought time to them to test first. Got a laptop PC and plugged into the cable. The monitor and cable worked.

  Tried to connect my mac to the TV with my ps4′s hdmi since I did that a lot before. Also works.

  The problem is literally the combination between the cable and the mac. Which is a problem since I got the reason was to serve as my mac.

  During my research, I saw that specifically leaving the connected hdmi where sleeps your laptop can spoil it supposed to be... I saw it one time so idk if it's true, but it happened to me... and no, it wasn't really a solution when I came across that. Tried Googling this specific problem, but did not meet anything since my problem seems so specific.

  Fast forward to the next day and tried again now that both had little respite between them. Plugged into the HDMI and my laptop starts fading and return to a black screen. The screen would go black usually and so the laptop screen and the monitor would appear once again. sauf_que this time that there not, he just kept it and the monitor has not changed (Yes) it's). Not wanting to let him do that too long I unplugged and tried a different port with an adapter, I have also, since I did 3 holes I could use this for might as well try them all again. But unfortunately, I don't have it trigger anything again. So I went through another round of troubleshooting to try to make it work, but here I am, trying to see if anyone else has had this problem and solved. I am back to wait another day I guess and just hope. If not idk what to do, except maybe to get another cable? I don't know if this would solve it well.

  Hello Kaida W,.

  Thank you for reaching out to the Apple of community support. I'll do everything I can to help you get your monitor works as expected. Our first step would be to restore your System Management Controller (SMC) that allows to manage systems of different material on your Mac. This article will guide you through reset:

  Reset the management system (SCM) controller on your Mac.

  Try it and tell us how it goes. The entire community is here to help.

  Best regards-

• My new airport does not detect my existing WiFi network, I can connect only via the LAN.

  Bought a new airport 1 TB TimeCapsule and I wanted to add to my existing via a WLAN network. It does not detect it and I can connect only via the LAN. What I am doing wrong?

  Unfortunately, unable to connect to a 3rd time Capsule part wireless using a Wi - Fi.

  You need to connect to the time Capsule to your existing modem/router using a wired Ethernet cable connection, permanent... like the Time Capsule Setup Guide illustrates.

  

  If you really don't want the time Capsule to connect using the wireless... she can do... If it gets a signal to another Apple wireless router. So if you were ready to add another Apple... as an AirPort Extreme router... and connect it to your existing Ethernet cable router/modem and configure AirPort Extreme to broadcast a wireless signal... .then.. .the Time Capsule would be able to connect in this way, assuming that he is where he can receive a good quality of AirPort Extreme wireless signal.

• HP Support Assistant on my laptop or desktop does not detect the other machine.

  HP Support Assistant on my desktop or my laptop does not detect the other machine.  They are both on the same network.  Both are HP machines. Both are running Windows 10.  Is normal.  I would like to kind of monitor my desktop with my laptop when I'm away from home.

  @bmedbury

  The behavior you describe is normal - the HP Support Assistant is a program "per computer", in other words, each program HPSA lies and keeps track of just a computer on which the program is installed.

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• Tecra Z50-A-11V: new SSD but earn 8.1 does not detect

  We bought a M550 Crucial 256 GB drive and you want to replace in a Toshiba Tecra Z50 - Av1

  We don't want to make any transfer of data or cloned.
  We want to do a clean install with Windows 8.1
  The BIOS recognizes the SSD

  But when you install Windows 8.1 doesn't detect any disk connected to the device and asked additional drivers. Windows does not detect the drive

  https://www.dropbox.com/s/mlvk6v3lxzi1rrh/2014-05-04%2009.47.18.jpg
  https://www.dropbox.com/s/fr2eo5l9xonaoln/2014-05-04%2009.48.59.jpg
  https://www.dropbox.com/s/8usxog8wm06funr/2014-05-04%2010.06.09.jpg

  I have also tested with version lasted this driver (old F6 to start to locate the hard disk driver)

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23496&lang=eng&wapk w = f6flpy-x 64.zip

  and with toshiba package
  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004211
  You can see that I have the version 3.20 BIOS. Interestingly, I see that the last one is the Toshiba has released version 3.1

  But still the CRUCIAL drive is not recognized by the instalation of windows startup

  The problem is similar with ubunto, kubuntu,... the drive is detected by the BIOS, but not for the OS.

  any help?
  Thank you

  Hello

  You solved this problem?
  Could you install system 8.1 Windows on this SSD drive?

  I think that the installation of additional drivers during the setting procedure isn't necessary since Win 8.1 should already contain pilots essential.
  From my point of view of the few, there could be a compatibility issue (maybe the SSD firmware update could solve that problem).

  What another SSD disk usage? You have the same problem with other SSDS from other manufacturers?

  Your comments would be appreciated.

• HARD drive does not detect the Tecra R940-1JG

  Hello

  I had double partition on the HDD for win7 pro and Win 10, but after update Win 10 that he was unable to start.

  I disconnected the drive and connected to my office and managed to recover the data.
  It works find in desktop, but it does not detect my Toshiba Tecra.

  I had an another 120 GB and tested in my Toshiba laptop and it works and detects ok.

  I change the settings of UEFI and AHCI but no joy.

  HARD drive is seen by BIOS?
  HARD drive appears on the first page of the BIOS?

• My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  My iTunes does not detect my iPad.  I use Windows 10, Norton 360 and the latest version of iTunes.  All software are up to date, and each says it works correctly.

  Turn off or get rid of Norton.   I really don't see why you need it.

• Does not detect my HARD drive in the BIOS

  Yesterday, I bought DT01ACA300 of HARD drive and it does not detect.
  I've tried it on two motherboards (different ports and different controllers: AMD, Intel chipset JMicron chipset) with different powers and signal cables (which do not work with my player Samsung HDD and DVD SATA Lite-on), but it won't do no good...

  It seems that the only thing that might have caused it may be the power supply, but I can't check it out because I don't have a spare. I tried to disable most of the unnecessary controllers on MB to lower energy consumption, but it did not help.

  From what I've read on the Internet, it seems that it is not I can do by myself and it is very likely defective drive, but I still have some hope that I can make it work...

  It would be a big problem to return to calm: I'll have to send in another city in the authorized service center so that they would check it, and then only, I can get a replacement (if noone will fly it by then, which can happen...).

  Which machine do you have?