Photoshop: image becomes black when you try to select with inclusive

Similar Questions

• Full of the image becomes black when you use the text tool in Photoshop CC

  When I create a text layer, the image becomes black.  If I enter text blindly, I'll see results when I finish and click another tool.  If I try to change the text layer, everything becomes black.  I'm not using the tool type mask.  I can select and move the layer and I mix the layer; I can't see what I'm typing.

  With the help of Windows 8
  

  
  

  Update your driver from the website of the manufacturer of the GPU video card.

• My Apple TV becomes black when you try to play content on NetFlix

  Hi guys,.

  So we have just upgraded to the new Apple TV 4 (32 GB model) and brought it home with our TV & home theater.

  Everything works until I try to read the content using the Netflix app that I downloaded the Apple TV. The show takes over (you can see the spinning wheel run as it load the movie/show) but when it starts playing you can hear content on the sound end surround, but the screen is just black - no video at all.

  If I do a full restart of the home theater, TV & Apple TV and start again it will load each time than in quite awhile - but more often that otherwise, I get the same error.

  Any thoughts on what I might hurt?

  Thank you.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  4. Reset Apple TV (settings > system > reset > reset all settings)
  5. Restore the Apple TV (settings > system > reset > restore)

  If guard re - problems that occur, you can have a network problem.

• Help - Photoshop Elements 8 crashes when you try to start multimedia

  Photoshop Elements 8 crashes when you try to start the Organizer. It is funny, from the editor of Photoshop is not a problem and works fine.

  I uninstalled the software and then installed again, but had no effect.

  What can I do?

  Nick

  Hold down the shift Organizer launch wjilst, and then click to create a new catalog, for example My Catalog2

  If the empty catalog open try to import multiple JPEG files and this will help to determine whether the original catalogue is defective.

• Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit.

  Photoshop cs4 access denied when you try to install from disk in Windows 7 64 bit. I tried in

  safe mode and it starts to install, but get an error there as well.

  What should I do?

  So when you put the disk in it does not work properly? When the disc is inserted, you should have a window pop up with 2 options. 1. install and another to see what is on the disk. Choose to open the disc or explore. Navigate to the folder where is the photoshop CS4 .exe file (which runs the Setup program), right-click on the .exe file and choose Run as administrator and it should start. See if it will install. If this isn't the case, then read below.

  I don't know how long you got in the installation until so chances are, you will need to run the CS4 Cleanup utility. 2 levels to run but do not use 1 or 2 just type number 3.

  http://www.Adobe.com/support/contact/cs4clean.html

  You may need to run the utility windows install cleanup too

  http://support.Microsoft.com/kb/290301

  Before you try to reinstall the software make sure that adobe reader is not installed. If it is delete. It has caused problems in the past with vista and CS4 installs.

  You can also disable windows Defender and all antivirus software. You can keep UAC Windows 7.

  When installing CS4 to 90 percent, it stops almost and may take 5 to 10 minutes at the end. It's normal. What a pain huh...

  After the installation is complete, restart

  After restarting, go to the icon of CS4 64-bit or 32-bit (depends on 32-bit or 64-bit Windows 7) in the starting area, right-click on CS4 64-bit (if you have windows 7 64 bit), and then choose Properties, Compatibility tab, and then check run as administrator at the lower part. Hit apply, ok to finish.

  Now, run CS4 and run the update.

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Photoshop Elements 7 - error when you try to open multiple images

  I've attached a screenshot of the error I get when I try to open more than 1 image at a time. the program ends up closing and I have to re open the program.

  I have xp pro installed on my pc. my pc is part of the domain. If I connect to the pc as an another domain user I can open more than one image. I deleted the program using Add/Remove programs and re installed, which made no difference.

  does anyone have advice?

  Take a look at this Adobe Tech doc titled Photoshop CS3 or Photoshop Elements 6 crashes when you open several images (Windows):

  http://kb2.Adobe.com/CPS/402/kb402704.html

  Cut and paste at the bottom of the document:
  
  More information

  Application or system error logs may cite ntdll.dll in the failed module.
  
  

  
  

  
  

• Colored vertical lines receivers when you try to scan with the printer a HP Officejet 6500.

  original title: reception of the vertical lines of color when you try to print using HP Officejet 6500 a printer.

  I have a HP Officejet 6500 a and the scanner is not working properly, I get only color vertical lines, what happens, how do I fix this please?

  Hello

  What operating system is installed on the computer?

  Follow the steps in the following links, and check, if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03111687&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4083977#n41

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01612462&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=4083977

• Error when you try to select record...

  Hi, when I try to select it, and then I got the following error: http://my.jetscreenshot.com/2677/20101001-8e07-90kb
  
  Can someone explain who and what to do?
  
  Best regards, Debuger!

  There are other threads about similar issues. Look carefully one, I hope that the answer is here: http://forums.oracle.com/forums/thread.jspa?messageID=4594478 http://forums.oracle.com/forums/thread.jspa?messageID=4438827 http://forums.oracle.com/forums/thread.jspa?messageID=4403360 edited by: Dimitar Dimitrov on October 1st, 2010 15:08

• Satellite A200 screen remains black when you try to start

  Hi all

  My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

  After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

  I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

  I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

  That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

  Thanks in advance,
  MrRoy

  EDIT:
  After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

  So, if this happens to you:
  1. turn off your computer.
  2. wait about 30 minutes.
  3. start in safe mode
  4. close using istead of now off button power button closure.

  It should work.

  Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

  The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

  Because I see that the processor does not work when I try start it.

  So let's say that this is the case, would it be the symptoms of my computer?
  And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

  But now, my computer is simply not starting, as I said in my previous post.

  Thanks in advance,
  MrRoy

  -----

  Note: The Edit button was not there so I had to double post :/

• CC of Photoshop does not open when you try to open the files in Lightroom CC

  Recently, when I try to open files in Photoshop from Lightroom CC, I get the error message that is attached.  If I manually open CC PS it opens and the LR files are there, but it does not open on its own.

  

  I went on the hard drive where these files are stored and checked the disk and there is no necessary repairs.  I checked my preferences for editing in LR and PS is the chosen program.  You have ideas.

  Thank you

  Larry Lindell

  Looking at this error report, looks like Lightroom trying to open a copy of Photoshop on your backup disk. Since it is a copy of the software and is not the property inscribed and the installation files, it is not able to launch correctly. See the following: Lightroom: "Edit in PS 2014" opens PS 2014 in the wrong place

• Finder crashes when you try to click with the right button on any file or icon

  I'm on Capitan 10.11.3. Any icon on the desktop or in finder itself is affected. In addition, I can't open the app store or quicktime.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Why the source monitor and program goes black when you try to apply the lumetri effect in cc first Pro 2015

  Whenever I do any type of adjustment in the effect of lumetri, monitors go black

  Hi Jerry,

  You have a structure of AVCHD (MTS) files folder?

  Please try the steps below.

  Close Premiere Pro.

  Go to the Documents folder and folder rename Adobe at old_Adobe.

  Then click on Start button, type %appdata%\microsoft\windows\sendto in the box find and open the folder Roaming Roaming > Adobe rename the folder of Premiere Pro. Plese don't delete any folder just a change of name.

  Roaming > Adobe, open the common folder and delete all files in the media Cache folder and media Cache files.

  Launch of Premiere Pro, then try to apply the LUT.

  Vinay

• screen goes black when you try to Watch youtube videos

  Hi, can anyone help. I can't watch the videos on youtube, the screen goes black and the computer freezers. I have a HP DV6, Windows 7

  Mattew wrote:

  Hello

  Still does not, now, the video and sound will play for about 2 seconds then the screen turns white with vertical stripes. He also freezers the computer completely

  Hi, thanks for your help, but this is how I fixed it. Hope this helps others

  However, to do this: go to http://www.adobe.com/software/flash and do a RIGHT CLICK on the logo that is being charged. THEN: Navigate down until "settings", click it, and you should have the choice: "disable hardware acceleration". NOTE: If you do NOT have this choice, study the icons down quickly: on MY screen, the left-most is an icon that looks like a video monitor: click on it and give you the opportunity to "disable hardware acceleration".

  It works, if you can get it done before you get a BSOD! AND do not take the life of your computer in your hands by updating your video drivers. I do not really recommend doing that!