PhotoSmart 2610

Similar Questions

• Photosmart 2610: Photosmart 2610 All In One

  I recently had to reinstall my HP Photosmart 2610 all-in-one.

  I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

  When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

  However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

  Help!   hehehe

  Phil

  Try to reinstall the software, use thislink to dnload the driver full features and software.

• Photosmart 2610 referee

  I have a photosmart 2610 all-in-one it works perfectly fine when I connect through my usb cable. the only thing is that I have 3 computers at home and who are used mainly for school work.when I arrived to my printer, everything has worked until recently collapsed when answering my network connections...

  When I look at my settings my ip network, the subnet and the gateway is all 0.0.0.0? OK so I thought that I add them manually and see what that dose... nothing to get all rest to 0.0.0.0... I am a network restore but still nothing happens! I print a config and everything is in the "off" mode. I'm not sure how to turn on the State of the network.

  IM on a XP pro SP3 with all latest updates for XP and HP software and firmware.iv got 3 other devices connected to my router which works perfectly fine, so I know theres nothing wrong with that.

  for any help or suggestion would be greatly apperciated!

  The Photosmart 2610 has no of wireless, which was a feature for the Photosmart 2710.  Go to settings, 8, 3, 2, OK, 2 and set the IP address, mask and gateway.

  Kind regards

  Bob Headrick, MS MVP printing/imaging

• Comparable to HP photosmart 2610 ink cartridge

  Is there a comparable cartridge for the HP photosmart 2610 printer all-in-one.

  I have always used the 96 cartridge which is expensive

  Panda4

  The HP SureSupply site indicates the cartridge HP 94 black is also compatible with the Photosmart 2610.

• Under Win7 Pavilion w HP Photosmart 2610 has-in-O. HP ground Ctr cannot find the scanner

  When I try to scan from the HP on my Photosmart 2610 Solution Center, the dialog box says can'r find the scaller because my device installation is not complete.  I've never had this problem before and can not solve even try to download new drivers.

  Hey CC22. Have you tried running the doctor printing & scanning HP? This tool may be able to solve your problem automatically. Try it and if she doesn't post comes with new details and we'll go from there.

  Thank you

  Sean

• Photosmart 2610 yellow color will not print

  My Photosmart 2610 is a pig.  She refuses to print Yellow.  I went through several routines clean and preferred and changed the cartridge for a new brand, but nothing raises any dribble of yellow.  Any help would be appreciated - thanks.

  I would gently pat dry the printhead on a damp cloth.  A working cartridge will have a strong task of cyan, magenta and yellow.  I suspect that your cartridge will show only cyan and magenta.

  In this case, there are a few things to check.  Are the original HP or reman cartridges / filled?  The latter usually have poor quality, see the study here.   The other possibility is that the cartridges are original HP but outdated.  There is not all "expiry" on these cartridges that might lead to print does not correctly after a certain date, but very old cartridges may have failures in one or more colors.  Check the end of warranty date (two years from the date of production) as indicated in the paper here.  This date is also usually printed on the lower right front back the package.  If the cartridges are very old and well beyond the end of warranty date, this is the likely cause.

  As a temporary measure, it can help to soak the cartridge in about 1 "of very hot water for about ten minutes, with the nozzle to the bottom plate.  Remove the cartridge and gently dry the electric contacts with a lint free tissue and try to print.

• Vista/Windows 7 Patch for Officejet 7210 7310 7410 and Photosmart 2610 2710 Duplex

  Some models of printer with automatic duplexer print not correctly on the back in Vista (or Windows 7 if Vista update).   In these models on the back is printed updside down regardless of the driver configuration.

  attached the zip file has a patch and instructions to fix this problem for the following printers:

  OfficeJet 7210

  OfficeJet 7310

  OfficeJet 7410

  OfficeJet L7300

  Photosmart 2610

  Photosmart 2710

  Patches for other models can be found here.

  This patch has been tested good, with more than 1,800 copies of this fix distributed by e-mail since April 2007.

  The zip file contains two files

  OJ7410.PDF contains detailed instructions for applying the correction.  Opening this file requires Adobe Reader or a similar pdf viewer, available for free download.

  hpo7x00t. GPD is the current patch file.

  To apply the patch download the here attached zip file.  Extract the files in the %Temp% directory, and then open the OJ7410.pdf file and follow the instructions.  If you have trouble finding the folder directory you can find this directory by opening your 'computer' folder and type folder in the address bar.

  tomscnorth wrote:
  Windows 7 driver is not automatic duplex printing. "The options are manual, or a booklet * two or more pages per page. How can you print a page by on the side of double-sided automatically?

  In fact, the driver of Windows 7 made good automatic duplex printing - no patch is required for Windows 7 [edit - this is true for fresh installation.  For the versions of Vista the patch may be used for Windows 7].  The default value for some printers, is that the duplexer is 'not installed', please check the Duplex Printing Troubleshooting Guide for Vista.  In Windows 7, the procedure is slightly different, in the folder printers click twice on the 7410, double-click the icon 'Customize your printer', device settings and under installable options go "Duplex for two back" on installed, OK.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging

• Series of HP Photosmart 2610 all-in-one, print only in black and white

  Series HP Photosmart 2610 all-in-one (printer, fax, scanner, copier)

  Model SDGOB-0304-01

  Windows 7 32 bit

  I have changed black only, now cannot retrieve colors. Forgotten what I've done, so any help appreciated.

  In the printing preferences: -.

  1 Advanced color settings set to '0 '.

  2. choice of color - print in grayscale - 'unchecked '.

  3. within the framework of advanced document - print all text in black: (disabled)

  These measures appear to be in place. Have you, you click on apply after you have changed these settings.

  You can try uninstalling and reinstalling the software and drivers. This will reset all back.

• HP Photosmart 2610 says that it will not print, because the transport is stuck, but it is not

  my HP Photosmart 2610 all-in-one, said that he will not print because the transport is blocked. Well, he is not stuck. Yet, I can't print. I printed close to 20 000 cards because I bought and installed printer. What should I do? can you recommend a printer to buy. Looks like it's ready for the 'OS' yard HELP.  PAUL LACNY * address email is removed from the privacy *.

  Hello

  Perhaps he is worn and requires little (routine) maintenance (20,000 sheets is a lot of printing).

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  There are three models, so enter-> Photosmart 2610 - in the link of the HP driver and select the version
  you have - then select your version of Windows.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• xi print Photosmart 2610 problems

  My photosmart 2610 xi has just started printing and copy very slow (8-10 minutes per page).  I've updated the drivers and software but no improvement.

  All solutions?

  I'm sorry you have a problem with slow printing.

  Try to perform a hard reset on the printer. Unplug the power cord at the back omit it for 30 seconds and plug it back.

  Try to print a self-test page or the printer in the printer itself status report. It is still slow?

  If this isn't the case, it may be a connection problem. Maybe change the USB cable.

• problem with scanning/image area for hp photosmart 2610 WIN XP

  Well well probably XP is half the problem since it is no longer supported... But I am havig problems scanning anything on my hp photosmart 2610. Area of the image go up and keeps telling me to insert my all in a disc and I evetually must use master to close the processes of HP. I tried everything to have HP on the phone (for 4 hours) and they could not uninstall and reinstall new drivers so not that I have two monitors of image digital hp running. Printing is not a problem but pulling to the top of photos and attempt at analysis of the new photos just do not work. I have the original disc of photosmart hp, but when I put it in my dvd player I get a message to put in an all in one disc I did not. I even downloaded the latest driver from HP and tried running that, but it does not say that it is alread installed... Should I just delete anything that has to do with my printet hp and then run the installation of new I removed the HP site? It makes me very nervous because I can print at least currently... If I delete everything and the installation fails, I can't live with printing capabilities. However, I want to be able to scan your photos of family, etc...

  Thanks for the help

  Robert

  Cheetah12

  Thank you for the information, he worked with a few minor changes since my system was a mess. But I would never have solved the problem without help...

  Great job

  Bob

• Photosmart 2610: Is there a 64 bit all in one photosmart for pilots heal hp fatal Error error during installation

  I don't know how I did before, but after weeks of trying, I got my photosmart 2610 fully functional.  Unfortunately, I lost patience with the obsolete photoessentials trying to install and fail at every reboot.  It wouldn't uninstall parameters, so I paid $45 for 'perfect uninstall' and it got rid of to essentials photo but also all other drivers hp including the interface of scanning HP Solutions elusive.  Now after only two days of repeatedly suite only solution Uninstall HP and download the 10 finished suite Windows and try again, I continually get the error ' error fatal Hp during the installation hzsetup.exe - wStub 1836654» Of course whenever installation fails the product installer to uninstall everything.  I ran the ccc/l. 4 uninstall myself and must have restarted a dozen times.  It doesn't seem like it should be impossible to get a printer to work.  Then, they put a link fixit of Windows 8 on my desk that says uninstall and download again and again and again.

  Hi @Grandpaknei,

  It's great to hear.

  I would like to try the steps in this guide enable/disable or remove items in the startup sequence:

  • How to change the Startup Windows 10 programs: speed up your PC by removing unnecessary applications

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Please reply to this message with the results. Good luck!

• HP Photosmart 2610 on MAC OS lost software installation

  The scan to printer all-in-one Photosmart 2610 function does not work.  The error message says "you must install the HP software to perform this function.  However, I can locate is no longer supplied with the printer installation CD.  I use a MAC with OS 10.7.5.   Is it possible to download the software?

  Hello @Redtail1,

  Welcome to the HP Forums!

  I understand that you are unable to scan a document using the Photosmart 2610. I will do my best to help you! Unfortunately, it is not a full software features available for this operating system. HP hereWeb site, provides an Apple Update software in order to install a basic print driver.

  Now, there are solutions that you can try to perform the scan. In this document, click "how to scan with the Apple software update driver. Try scanning from Apple Preview, Apple Image Capture or printing and scanning.

  If you have any other questions, please let me know. Have a good night!

• Downloaded driver for photosmart 2610 but get message application not valid Windows? win xp

  driver installation download for photosmart 2610 all-in-one, but cannot install download the message that it is not an application validates Windows.   confused as it was for win xp.

  I have

  banhien wrote:

  Hello

  Which file you downloaded, was - what?

  http://ftp.HP.com/pub/softlib/software10/COL10511/OJ-30606-2/rub_w01_Americas_Euro1_NB.exe

  Kind regards.

  Yes, redownloaded it and it worked.  Thank you

• Photosmart 2610 won't print pictures with Windows 7 - Please HELP!

  My HP Photosmart 2610 all-in-one will print any photos on my new computer.  He used to work, but he stopped.  It still prints Word and Excel.  I tried several downloads without result.  If I plug my computer dinosaur with XP I can print photos.

  I get no error messages.  It is said he sends to the printer, but when I check the queue of the printer, nothing showed.  I always, I can't understand if it is a problem of MS or HP problem.  Somehow the communication between the two is getting lost, but since it still prints of word and excel, I am at a loss as to where the problem lies.

  I spent hours and days on this!  I am told by my friends that are good at computers "HP is the worst."  Is this the case?

  Hey Ashenk. If the printer prints from another PC perfectly, then I wouldn't think the printer to be the problem. It is possible that the print queue has had a hiccup and it needs to be reset. Here's how to reset:

  1. press on the ORB start lower-left on the screen.

  2. click on 'run '.

  3 type "services.msc" (without the quotes)

  4. Locate the print spooler service in the right column

  5. click on restart the service on the left link

  Let me know if that solves the problem.

  Thank you

  Sean