Photosmart 3210 print on transparent surfaces

Similar Questions

• Photosmart 3210 print extra page after the installation of the Mavericks.

  HP Photosmart 3210 - old but already reliable.  Mavericks installed within the last few days.

  An additional page is printed after or before each document.  Page is strange for example 2345 X numbers.  or 2.

  Window printers and scanners (Options and supplies) says he uses pilot 4.0.4

  The line with 2345 X seems to be typed after the correct draw is complete, but page is not pushed to the next printed document is initiated. Line 2 is printed our apparently at random, when printer is idle.  Twice while I typed this

  I tried to delete the printer and reinstall after verifying the software update.  He has not fixed the problem.

  Hi wbt1,

  The patch is compatible with Snow Leopard 10.6, and I am confident that he will solve the problem. This HP Print Driver Update solves the problem with HP inkjet products that causes an extra page to print once planned.

  Communicate details

  Exit the: 03-12-2013

• Photosmart 3210 printer all-in - one

  I get an error message on my computer that needs to be replaced my black ink cartridge... I had just installed all new cartridges and they are all full.  Why would I receive this message?  I called CS and I was told that because my printer was out of warranty, which is probably the driver.  Given that I only am not computer savvy, I'm not sure what should be done at this point that the printer is only 4 years old.  Can anyone give me a suggestion on how to solve the problem before I spend the money, it is fixed or replaced?   Thank you

  It is possible that the new cartridges were new in the box, but beyond their life expectancy.  You can check the dateof end of warranty as described here.  The cartridges which are very old may have ink that has thickened because of evaporation.  There's a debate of the issues surrounding the ink expiration.  Photosmart 3210 allow a substitution of the expiry of the ink if that is the issue, please refer to your user manual.

• Photosmart 3210xi: xi Photosmart 3210 printer software to win 10

  Where can I get the all-in-one software compatible with Windows 10?  Print very well, I can't seem to get it tested.  Help, please.

  Hello

  Thank you for using the forum.

  Cannot find the software FULL of features for you on hp.com, so you must print using the-OS drivers.

  Have you tried the HP scanning and Capture of AiO remote control?

  HP AiO Remote apps

  Follow these steps to get the applications (if it is not already installed):

  1. Go to the Windows store
  2. Search for "HP AiO Remote" apps
  3. Install the apps.
  4. Apps should detect your wireless printer, depending on the applications, there is a function "Scan."
  5. Click the Scan and it will direct allows you to download apps "Scan and capture.
  6. After installation, you should be able to scan.

  Also for a sweep, can you try to open Paint and then try scanning from there?

  

  Hope that helps.

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• to install hp photosmart 3210 on laptop with vista

  I have a HP Photosmart 3210 printer installed on my home network.  He was running from my old PC.  Now want to link my laptop that runs Vista and can not install the printer.  Any ideas how I can get around this?

  Thanks in advance.

  Hi nickynoos175,

  Follow the steps outlined in the document below.

  Install the software of the product in Windows Vista for a wired network connection (Ethernet)

• HP Vivera Photosmart 3210: EXPIRY of the INK. can buy black ink only and print n & B with the range of printers hp Vivera 3210?

  all ink has expired. can I buy only black ink and print n & b with hp Vivera printer, photosmart 3210 all-in-one

  and black and white printing only with color expired ink in there?

  Hi @peanut7949,

  I believe, with this model, you can continue printing with inks has expired. That being said, if you replace only the black ink and continue to print with others (expired), it should be fine.

  Here's what I could find on the subject:

  Each ink cartridge has an expiration date to protect the printing system and ensure a good quality ink. The cartridge expiration date appears on line 53 of the free test report.

• . HP Smart printing fails to include images - all-in-one printer, HP Photosmart 3210

  With the help of HP Smart printing on all-in-one printer, HP Photosmart 3210. Smart photo has disappeared from my computer and now reappeared. Now the images are not yet an option to include on the printed page. They do not appear.  Has anyone else had a problem with Photo Smart?

  What operating system do you use?

  What did you do to make them reappear, or just is it?

  Have you noticed updates to HP or Windows until the printer is missing? What happened before he reappeared?

• PROBLEM WITH PRINTING 4 X 6 ON PHOTOSMART 3210

  I have downloaded a driver on my toshiba

  lx830 - 11(d) but 3210 photosmart printer do not print

  my photo tray, keeps the impression in the main tray

  help please

  Hello toolmaker14.

  I understand that you can not print 4 x 6 photos using your Photosmart 3210. You want to make sure that you change the print settings, within the program you are printing from.

  Please follow this HP document pictures 4 x 6 from a computer printing.

  If this printer is still printing of the 'Hand' plateau, then follow this HP document on when the printer is not Pick Up paper from the Photo Tray.

  Check that paper photo 4 x 6 is placed face down. Also ensured it is pushed as far as the paper can go. He must be touching your rolls of paper.

  Please send me your troubleshooting steps.

• Poor print quality Photosmart 3210 with OK with XP Windows 8.1

  The downloaded programs and drivers for the "HP Photosmart 3210' using Windows 8.1 do not provide quality sectionals, resolution, paper size, etc., which was available on Windows XT.

  Hello!  Sorry above my pay grade.  Make a new post and ask your question on to the bottom of ranking to W7?

  Not many people like W8. When you all get out all the bugs in a few years, I'll think to the top of standings. Until then, I'll stay with my W7

• How can I print my Microsoft Surface running Windows 8 RT?

  How can I print my Microsoft Surface running Windows 8 RT?

  Most new wireless printers have an impression of the Microsoft Surface with Windows 8 RT problem.  Everything you need to make these printers is tell them to print and they will.  Older wireless, Ethernet and USB printers should not have driver officially supported in Windows 8 RT, but there is a way to get the printer working.  There are different requirements depending on how the printer is connected to the Surface.

  Note: All the steps below are only for other HP ink Jet, DeskJet, PhotoSmart and OfficeJet printers.  These steps are not for Laserjet printers or printers from other manufacturers.  These steps may not work for all inkjet printers.  If these steps do not work, try different drivers in the list until you find the one that works (you'll understand what I mean once you follow the steps below).  If none of the drivers work, your printer does not work with the Surface.

  For (Ethernet or wireless) network printers, all you need is Surface keyboard or a USB keyboard to connect to the Surface.  It is simply what you have to type more easy to type.  You will also need to have the Surface and the printer connected to the same network.

  1. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  2. Press search.
  3. Under the search box, tap Settings.
  4. In the search box, type devices and printers.
  5. Press devices and printers.
  6. Contact add a printer.
  7. Tap "my printer is not listed.
  8. Select the TCP/IP option and then press Next.
  9. Enter the IP address of the printer and press Next.  Note: You can get this from the network printer, or list DHCP in your router Configuration Page.
  10. The Surface will locate the printer and try to install it.  Installation fails, and the Surface will be asked what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  11. Press 'I want to choose from a list of drivers.
  12. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  13. Choose HP in the production list.
  14. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.) )
  15. Press Next.
  16. Tap Finish.
  17. Test print.

  For USB connected printers, need you a USB cable to connect the printer to the computer.

  1. Connect the printer to the computer via USB.
  2. Windows will try to find the drivers but will not be able to.
  3. Here Windows may ask you if you want to choose the driver to install.  If she go to step 14 below.
  4. From the right edge, drag your finger to the left on the screen Surface to appear charms bar.
  5. Press search.
  6. Under the search box, tap Settings.
  7. In the search box, type Device Manager.
  8. Press Device Manager.
  9. Tap view and select Show Hidden.
  10. Search for the printer in Device Manager.  It should be in the other devices section with a yellow warning next to her sign.
  11. Select the printer in the list.
  12. Press Action.
  13. Update driver to touch or to install any what it displays.
  14. The Surface will ask you what you want to do, look on the internet for the driver, or manually install the driver.  Choose to install the driver yourself.
  15. Press 'I want to choose from a list of drivers.
  16. If no driver is in the list, make sure that the box next to 'Show compatible drivers' is not checked.
  17. Choose HP in the production list.
  18. Choose driver DeskJet PCL 3 class in the list of drivers.  If this driver does not work, try using the Photosmart PCL3 driver, or the driver Officejet PCL 3.  (Thanks JonW for letting me know about these other alternates.)  )
  19. Press Next.
  20. Tap Finish.
  21. Test print.

  I hope this helps.

• My Photosmart 3210: when scanning slides 35 mm, the scan results in a single image

  Photosmart 3210 all-in-one

  Mac OS 10.6.8

  HP software: HP_Installer_Photosmart_Full_Group12_10.3.dmg

  This is my 1st attempt to digitize old 35mm color slides. At the first trial, the scanner produces four good images. On the next sweep attempts, it produces only a single image containing four slides and a message in the printer says "no scan options".

  I tried your troubleshooting ideas: unpluggng the printer, uninstall/reinstall the software HP & pilot.

  All other functions of the word OK printer. Any ideas?

  macintod

  Thank you, Sean.   Scanning is now the induvidual pictures production. But I had todo several other procedures.

  I have reset the printer according to your instructions, but it had the same negative results.

  I then unplugged the power from the printer and the signal cables, and then reconnected them and restarted the printer. I then reset the printer by you instructions.  I restarted my iMac's "HP Scan", selected slides in the HP scan profiles and pressed 'Scan '.  The result was four individual images.

  Thank you very much.   macintod

• Photosmart 3210: BLUETOOTH ADAPTER for PHOTOSMART 3210

  I have an old Photosmart 3210 all-in-one printer still works fine.  I want to make it wireless using a bluetooth adapter.  The recommended is bt300.  Y at - it a newer version that would work? I don't think it sells more.

  Hi @SW-NewtownPA,.

  Welcome to the Forums of HP Support!

  I see that you are wondering if you can use a bluetooth adapter that is different than that of your printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I don't know if you can use another bluetooth adapter, but the manual indicates that the HP bt300 and HP bt400 work.

  Manual

  Login your HP all-in-one are equipped with a USB port you can connect directly to a computer via a USB cable. You can also connect your HP all-in-one to a wired network. If you insert a bt300 HP or HP bt400 series adapter printer wireless Bluetooth® in the front USB port, Bluetooth® devices such as PDAS and camera phones can print to your HP all-in-one. Note in the rest of this chapter, the bt300 HP or HP bt400 series Bluetooth® wireless printer adapter is simply referred to as an HP Bluetooth® adapter.

  To see if these adapters are still available, or if you can use other adapters, I would call the HP parts store.

  To order HP computer and components of the printer parts by phone please call 1-800-227-8164 Monday-Friday 07:00 - 7:00 pm CST

  Hope that answers your question. Thank you for posting!

• HP Photosmart 3210 will not install on Windows 7 Pro 64 bit.

  HP Photosmart 3210 will not install on a brand new desktop running Windows 7 Pro 64 bit.  I downloaded the latest software, and when I run it, the installation window disappears shortly after it starts.  No error message.  I ran into several related issues lately.  I can't install a ScanJet 5590 on a new laptop running Windows 7 Pro 32-bit.  Said it ends, but nothing is installed.   Could the fact that there are other HP printers installed on these computers (network printers) installed using driver only before attempting to install the software cause problems?  I spent hours trying to solve these.

  OK, much better progress!

  If the software is always installed, tell him you'll connect later.

  Go to devices and printers, look for the printer here, make sure you that no documents waiting to print and delete the printer if it is there.

  Then go into Device Manager and remove all photosmart series 3200 drivers you find, you may need to click displays hidden on the view menu.

  Thirdly, go back to the devices and printers. Select another printer, as the writer XPS comes with Windows. Along the top, with adding a device, add a printer, print server, you will see properties. What to choose and go to the tab drivers. If you have the HP drivers in there you do not, select them and choose delete and "delete the driver only."

  Now restart and go to your Start menu and your HP folder. You must have installed the software, just no device driver, select "add a device" or "printer setup and software." Installation should complete without problem.

  One last thing, you must temporarily turn off firewall and antivirus installation, in which case he mistakingly tries to block the attempt to install.

  Good impression!

• I have a photosmart 3210 that repeated blue ink is empty, but it is news. What's wrong?

  HP Photosmart 3210

  driver is installed on Windows XP

  error message: "replace the following empty ink cartridge to continue printing" on a brand new Blue cartridge.

  I do not often use the printer. Last summer, he started asking me to replace some empty cartridges. So far, I have fill all of them. All the other cartridges are fine when they are rfilled and replace except blue. So, I bought a brand new blue ink cartridge. But the printer keeps giving the same error message.

  How can I solve this? Any other issue could cause this error message? Is that my printer is totally out? so disappointed...

  Thank you!

  HI -.

  Unfortunately, the only other thing I can think is to try a reset of the printer.  With the printer on, remove the power cord 2 to the back of the printer, and then from the socket.  Wait 60 seconds and reconnect the power cord the printer and the power outlet.  If that does not take care of him, the printer will probably need service, though it may be more cost effective to get a new printer.  You can find options to contact the HP Support here.

  Sorry we were not able to solve.