Photosmart 3210xi: xi Photosmart 3210 printer software to win 10

Similar Questions

• Photosmart 3210 print on transparent surfaces

  Two questions. The Photosmart 3210 can effectively print on transparent media for inkjet printers? If yes the 3210 requires media with a sensor strip or not?

  Thank you

  Photosmart 3210 print on coated ink-jet transparency materials.  You will need media with the strip of paper for the printer to correctly recognize the media as it is introduced into the printer.  I suggest that you select the type of real media in the paper/quality tab rather than leave it in automatic mode.

• Photosmart 3210 print extra page after the installation of the Mavericks.

  HP Photosmart 3210 - old but already reliable.  Mavericks installed within the last few days.

  An additional page is printed after or before each document.  Page is strange for example 2345 X numbers.  or 2.

  Window printers and scanners (Options and supplies) says he uses pilot 4.0.4

  The line with 2345 X seems to be typed after the correct draw is complete, but page is not pushed to the next printed document is initiated. Line 2 is printed our apparently at random, when printer is idle.  Twice while I typed this

  I tried to delete the printer and reinstall after verifying the software update.  He has not fixed the problem.

  Hi wbt1,

  The patch is compatible with Snow Leopard 10.6, and I am confident that he will solve the problem. This HP Print Driver Update solves the problem with HP inkjet products that causes an extra page to print once planned.

  Communicate details

  Exit the: 03-12-2013

• HP Photosmart c3180: printer software did not install

  Hello

  I recently upgraded my PC and installed a new motherboard. Now, I've had my C3180 printer for 5 years now, whenever I have installed the printer software, I have had no problem on one of my computers. The software in question is the HP all in one series to my printer.

  Now here's the problem, after setting up my new PC, I'm trying to install the printer drivers to use the scan etc. The error is the software constantly gives it's when I try to install: cannot find USB drivers and a USB device "this computer has no support USB available for this installation. I tried the program several times and he refuses to install.

  Well, here's the catch, I installed all my USB motherboard etc drivers correctly and they all work. All my USB devices, keyboard, webcam, headset all work. Now on windows 7 64-bit devices and printers, the printer is actually shown and active. I even printed the windows program help and it prints that I need to fine.

  In Device Manager in the USB printer section he calls here HP Photosmart 3100 is active and has no problem at all.

  This is why I can only conclude this is the stupid software refused to install because it can not detect my USB drivers even if my USBs are working very well and I can even print the printer to start! My new motherboard is an Asus Maximum hero 8 with all the latest drivers to installed

  Thanks for all the suggestions that I really need to use the printer to scan using the HP software

  

  Hello

  (1) run the executable (i.e. AIO_CDA_NonNet_Full_Win_WW_130_140.exe) HP installation package
  2) open Windows Explorer and type % temp % in the address bar, and then press ENTER.

  3) navigate to the extracted installation folder, it will start by 7z (e.g. 7z1234S)
  Note: If there are several of these files to find the most recent sort by "Date Modified".
  4) go to the "Setup" subdirectory in this 7z folder.
  (5) move, delete or rename the usbready.exe file which is the Intel USB System Check utility.
  6) navigate the directory tree in the 7z folder and double-click the installation executable (Setup.exe)

  You can see any difference now?

• Photosmart 3210 printer all-in - one

  I get an error message on my computer that needs to be replaced my black ink cartridge... I had just installed all new cartridges and they are all full.  Why would I receive this message?  I called CS and I was told that because my printer was out of warranty, which is probably the driver.  Given that I only am not computer savvy, I'm not sure what should be done at this point that the printer is only 4 years old.  Can anyone give me a suggestion on how to solve the problem before I spend the money, it is fixed or replaced?   Thank you

  It is possible that the new cartridges were new in the box, but beyond their life expectancy.  You can check the dateof end of warranty as described here.  The cartridges which are very old may have ink that has thickened because of evaporation.  There's a debate of the issues surrounding the ink expiration.  Photosmart 3210 allow a substitution of the expiry of the ink if that is the issue, please refer to your user manual.

• HP Photosmart 8230 Printer: HP Photosmart 8230 printer software

  Hello world

  I had to reinstall HP Photosmart 8230 printer but have lost the instalation CD. Not supported by HP more. Someone know where I can get the no?

  Thank you

  Hello

  Thank you for using the forum.

  You can try the following:

  1. Plug in the printer and connect it to your computer
  2. Turn it on
  3. Right-click the Start button, then click on the following text:
  4. Control Panel
  5. Devices and printers
  6. Add a printer
  7. Click the printer that I want isn't listed
  8. Add a local printer with manual settings
  9. Next
  10. Use an existing port
  11. DOT4_001 (printer HP device)
  12. Next
  13. Under manufacturer select HP
  14. Under printers select HP Photosmart 8230 series class driver
  15. Next
  16. Select use the driver that is currently installed, or replace the pilot current (any)
  17. Next
  18. The printer name is click next
  19. Do not share this printer
  20. Next
  21. Print a test page
  22. Close
  23. Finishing

  Hope that helps!

• I'm unable to uninstall HP Photosmart 7280 printing software

  I can't uninstall using the uninstaller shortcut in the start menu or programs and features in Control Panel.  The two methods for result anything happening.  Can anyone suggest how I could uninstall?  I don't have the printer.

  What follows for the 7280 Photosmart of HP Support can help: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02259020&lc=en&product=3204785#N1162

• Photosmart C4380: printing software

  Is there a software that will allow my printer work with windows 10 pro (64-bit)? before I bin!

  Try this direct link to download the driver.

  http://ftp.HP.com/pub/softlib/software13/COL30677/MP-110028-3/PS_AIO_02_USW_Full_Win_WW_140_408-5.exe

  Concerning

  PrntDr

• Error message - system tries to install the HP Photosmart C4680 printer software

  I installed Windows 8 Preview of consumer months ago.  Now, I get an installation error that does not affect the printer - it is fine as it is - and I can't do the install failed mended stop repeat whenever I want to use the printer.

  I'm guessing that the drivers are not compatible with this version of Windows, and the system tries to do a regular update of some sort.  Known issue?  If so, can I disable in order to install so that I'm not tying up of resources all the time?

  Hi CalypsoReid,

  See the following thread: http://h30434.www3.hp.com/t5/Windows-8-Release-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-Windows-8-Consumer/m-p/1334287

• HP Photosmart 3210 all-in-One of network error printing from Windows 7

  Impression on Photosmart 3210 all-in-One on the home network in Windows 7 Acer Aspire laptop breaks down

  -message is "error printing".  Printing to the same printer via USB connection is successful.

  Printing by the same network of other Windows 7 laptop (Sony) and Windows XP (Dell) works very well.

  Used HP diagnostics to ensure drivers/software updated and used HP network diagnostic utility

  to confirm the printer is visible on the network that it is. When the printed test page is selected, but nothing happens.

  Hello

  Thanks for posting,

  This may be a problem with ports,

  Please click on start and then click on devices and printers and then right-click on the Photosmart 3210 printer and click printer properties. In the printer properties window, click the ports tab and check if the selected ports is with the IP address of the printer also check if it is the WSD port. If the selected port is not the one with the IP address of the printer, select one with the IP address of the printer and also make sure that it's not a WSD port and the TCP/IP port. If a selected port type is WSD, select Standard TCP/IP port with the IP address of the printer. If you can't find any port in the list with the IP address of the printer, and then click Add port and then select TCP/IP Standard and enter the IP address of the printer in the address field and add the port and then click on apply and then try to print.

  If the problem persists even after ensuring that the selected port is with the printer IP address o FLE, then try disabling the firewall installed on your computer (if any) software and then try to print.

• to install hp photosmart 3210 on laptop with vista

  I have a HP Photosmart 3210 printer installed on my home network.  He was running from my old PC.  Now want to link my laptop that runs Vista and can not install the printer.  Any ideas how I can get around this?

  Thanks in advance.

  Hi nickynoos175,

  Follow the steps outlined in the document below.

  Install the software of the product in Windows Vista for a wired network connection (Ethernet)

• Photosmart C4795 all-in-1 main: all-in-one HP Photosmart C4700 printer unable to establish 2 way communication with the PC

  I have more than one year of experience using this printer with no problems. Several days ago, it has become unplugged from the PC that I have been using it for over a year & stayed like that for 2 or 3 days. At the end of those 2 or 3 days, the cable has been properly reconnected, but was unable to restore '2 - way communication' with my PC since then.

  As this is a scanner/printer I have proven it always of the functions as a photo Copier.

  To try to solve this problem, I updated the drivers & replaced the cable with a new one without success.

  My OS is Windows 7, as this PC 4 or 5 year, is not compatible with windows 10.

  PS - I would also try to use it with my new PC (a Touchsmart laptop HP with Windows 10 15), but my terms of service for the State of Photosmart C4795 printer software which using the software on more than 1 computer is a violation of the terms of service.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem of communication with your PC.  Download and run "print and Scan Doctor."

  For your Windows 10 machine I suggest you download the recommended driver and software from HP here.

• Installation of printer software program did nothing

  Hi, I just bought a HP desktop computer running Win 7 Pro SP1 again.

  Downloaded from the HP Web site more complete sw for HP Photosmart C7250 printer software (released in 2009, Version 13.1.0).

  (1) using the Wizard installation and download of HP:

  The download was successful. After the installation process has started (and after confirming the safety message) the hanged Wizard. The bar has shown 100% downloaded and extraction showed 100% copmpletion, but nothing happened thereafter. No files showed up everywhere and the actual facility never began.

  (2) use an open direct file of extraction: Extraction done, but nothing happened thereafter.

  (3) use WINZIP to open archive manually and start the INSTALLATION. EXE in the folder, but nothing has happened later.

  (4) use compatibility mode, nothing.

  (5) use administrator mode compatible and right, nothing.

  Help, please. What else is more ridiculous than faling to run HP software on HP hardware?

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If the steps above does not help to solve the problem, open the Device Manager and devote the processor category, if you have an AMD processor trying to install the patch below:
  http://ftp.HP.com/pub/softlib/software12/COL40390/OJ-98352-1/HPAMDC50PATCH.exe

  Kind regards
  Shlomi

• Photosmart 3210 software isuues with win vista

  whenever I update software, an additional printer is installed on the computer.  I currently have a hp printers 6 appearing in the file of your printer.

  I suggest you uninstall the software by going to start, all programs and locate the HP Photosmart 3210 and uninstall and go out and download the latest version of the software for this printer to http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-47754-2&lc=en&dlc=en&cc=us&os=2093&product=447851&sw_lang=

• Update removes himself from the software update for Photosmart 3210 (Snow Lepoard)

  Hi-

  So I recently installed the full software for my HP Photosmart 3210 for my mac which is under Snow Leopard. However each time I run the software update / sometimes it automatically prompts for installation:

  Drivers HP Update V2.3 size: 4.8 MB

  I always choose to install it but for some reason it doesn't seem to withdraw from the automatic update. Either I think its not install or not really sure. I checked the version number on the HP Installation Wizard on my computer, I installed a this is version 2.3.15. I don't really know what to do.

  Any ideas?

  Thank you!

  Do you really need it?  Snow Leopard has print and scan drivers built into the OS, so the HP software is not necessary.

  To uninstall completely that it:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

  Scan from preview or Capture of Image apps. Scan from the front panel of the printer does not work yet.