Photosmart 3310: Cannot use the installation CD

Similar Questions

• Cannot use the installer for Officejet 6500 all-in-one because of the resolution of the screen

  Hello

  I thought I could install my new Officejet 6500 as a printer network during the weekend, but apparently, HP had a different opinion...

  I use a netbook for my work as I travel a lot. Unfortunately, the screen resolution max available for these computers to wide screen is "limited" to 1024 x 576, which is less than the minimum required by the installation software (800 x 600), so I can't just install drivers and software. I tried to download the drivers from the HP support site, but ran into the same problem again.

  I'd appreciate any help I don't have a desktop or a laptop with a ratio of the 'normal' view and I'm stuck with a machine that is "useless"...

  Thanks a lot in advance!

  Yes. When you get to the window system requirements check, click the button cancel while now the keys Ctrl + Shift. It will bypass the sys. Req. check and continue with the installation. You may need to do this several times for the installation to continue.

• failed to start pro 8 victory cannot use the installation disc for repair

  Help! I create my own PC and purchased a version OEM WIN 8 PRO installed and operated for about 2 months. Now, he crashed and could not start. After I searched this and other sites, I tried several different ways still could not solve the problem.

  I tried:
  -"ren system to system.001" on the command prompt, it will not refresh properly
  -"ren software.001 software" he returned 'unable to rename the file, the file is use by another application.
  -start-up of the plant purchased dvd, he went to the auto repair mode still and does not
  -use another PC with Win 7 to create installation media, but it does give me the option 'install by creating media', but tried to install it on that PC that I aborted it.

  I checked using hard disk WD Data lifeguard on the other PC, it took extensive testing. I don't know what to do now. Can you hep me?

  How to access the advanced Windows 8 Boot Options
  http://pcsupport.about.com/od/Windows-8/a/open-Advanced-startup-options-Windows-8.htm

  Understanding and access to Windows 8 Advanced startup options
  http://www.geek.com/articles/chips/Windows-8-Advanced-Boot-20121218/

  Advanced startup options Windows 8 offer major improvements
  http://www.TechRepublic.com/blog/window-on-Windows/Windows-8-Advanced-startup-options-provide-major-improvements/6496

  How to fix the Windows Bootloader
  http://www.TweakHound.com/2012/11/13/how-to-fix-the-Windows-bootloader/

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  Disk recovery Windows 8 download
  http://www.WindowsReinstall.com/WIN8/windows_8_recovery_disk_download.htm#.UjYoE_g9I5s

  You can try to use a friends Windows 8 machine to create "Drive Recovery" (do not add the Partition Recovery friends he however).  You should be able to use this "Drive Recovery" to start troubleshooting on any machine Windows 8.  See control Panel\All Control Panel Items\Recovery

  Cannot refresh or reset the PC after that auto repair fails in Windows 8
  http://support.Microsoft.com/kb/2823223/en-AU

  Can you run your Windows 8 DVD in the current installation of Windows 8 and fix Windows 8 by an upgrade to the currently installed operating system Windows 8?

• Windows cannot complete the Installation in Mode safe

  Hi, I have a Packard Bell with Windows Vista laptop

  The graphics card on the laptop no longer works. The stops of the laptop to a black screen when loading windows, but worked perfectly in safe mode.
  I talked to the technician who said to reinstall the operating system, so I used F8 and then chose "Repair computer", and then selected recovery Packard Bell and wanted to reinstall my laptop, which has successfully completed.
  Restarting the laptop and as he cannot get to windows it cannot complete the installation of the operating system, I try to go to safe mode that loads but I get an error saying something in the sense of "Windows is unable to complete the installation in safe mode. Stop and try in windows. I'm stuck now and can not use the laptop at all. I want to be able to use the computer laptop atleast in safemode, required the installation of vista.

  I can access the command-line by F8 and then choosing 'computer repair. Can I use the command prompt to complete the installation.
  Or y at - it another way I can complete the installation?

  Thank you very much

  Hello

  you have little choice

  1. attach the graphics card

  2 and contact the manufacturer because it is their recovery process, NOT microsofts

  you already know that you can not complete the process of recovery of manufacturers in safe mode

  and we cannot help you with their recovery process

  good luck with it

• cannot use the CD to install the printer. Series of HP Office Pro 85 A909g

  Cannot use the CD-Rom installation disc to install the printer.  Series of HP Office Pro 8500 has 909 g.  I need to know if I can download what I need to do my printer works.

  Visit the hp product page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3752459
  Select the operating system of the computer and download the driver software.

• SRM INstall - cannot update the Installation of Perl directories.

  I get an error when I try and install SRM. Sometimes almost to the end and then an error occurs stating.

  Failed update installation directories Perl.

  Details:

  Cannot open the 'C:\PROGRA~2\VMware\VMware' perl script: no such file or directory

  Press Retry to try again or Cancel to exit the installation.

  Environmental specifications are:

  I'm on a Windows 2008 R2 VM with SQL 2008 Ent R1 64 bit installed.

  1 vCPU

  2 GB OF RAM,

  C: 40GB,

  D: 10 GB

  Used Installer - Vmware srm - 4.1.0 - 267817

  I want to install to "C:\Program Files (x 86) \VMware\VMware vCenter Site Recovery Manager\.

  * Note that the difference between the installation path and the path of the error. The installer is truncating the directory path.

  I tried to install to multiple locations, including the D: and also change the names of directory structure thinking the lengths of inventories had something to do with it. Whatever the names of directory, the installer truncates the path.

  I use the installer with administrator privileges (R, click Run as Admin) and have also tried to run the installer in compatibility mode.

  I also tried to solve the problem using the suggestions located below with no luck. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1023191

  Someone at - it ideas? I searched high and low and havn't found a solution.

  Thank you

  JKasal

  Try turning off the UAC (User Account Control). :

  1. start, click principally made programs, accessories, click Run, type secpol.msc in the Open box, and then click OK.

  2. If the user account control dialog box appears, confirm that the displayed action corresponds to what you want and then click on continue...

  3. in the local security settings console tree, double-click local policies, and then double-click Security Options.

  4 scroll down and double-click user account control: run all administrators in Admin Approval Mode.

  5. Select the option disabled and then click OK.

  6. close the local security settings window.

  HTH

• Cannot use the functions F1-12 on my Satellite C55 - A - 19 K

  Hello

  Satellite C55 - A - 19 K have a keyboard drivers?
  I cannot use the functions F1-12 and can not get the wireless since it s on the keyboard...
  Any 1 can help please?

  This function is not controlled by the driver keyboard, but with utilities and tools specific to Toshiba.
  What operating system do you use?

• Use the installer of the cartridges

  I just got this printer HP Deskjet advantage 5525

  When I put the ink supplied with the printer, this message on the printer screen says 'Use INSTALLATION Cartage'! (Please use the INSTALLATION supplied with your printer cartridges)

  In fact, I put the orginal.

  Installation cartridges are used for initial installation, after using the ink you would replace them with standard supplies.

  If the cartridges that came in the box didn't work, I would say the troubleshooting steps described in the paper here.  If this does not resolve the issue, I suggest you contact HP to service.

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• Cannot complete the installation on WRT54GS and connect to internet

  Hello everyone.  I recently was good to a WRT54GS v.2, which came from a member of the family which has improved their wireless router and therefore passed it along to me.  It worked perfectly for them, but not me.

  I tried to use the installation CD and do a manual installation, but no internet connection is detected.  I have to admit being a total newbie router wireless, this is my first, so I am confused as what to do then.  I looked through the forum and the FAQ, but I don't know what could be applied to my situation and I am not very well versed in the terminology, I tend to get lost.

  If someone could be kind enough to help me out or point me in the right direction, I would be very grateful.

  Thank you!

  OK, I have another update, lol.

  I have just gone to the configuration page and decided that, what the devil, I would return the automatic DHCP settings instead of the PPPoE to see what is happening, and here I can now browse the internet!  Certainly, it's Wired installation and now I have to set up our second computer with the network adapter hope it will connect with the wireless router, which is the point of this whole exercise, but at least, I'm a lot closer.  No baby, lol.

  Thank once again for all the kind help.

• Photosmart C6380 - cannot delete the document removed from the print queue.

  Photosmart C6380 - cannot delete the document removed from the print queue.

  Hello

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler , made service right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the documents have been deleted.

  Kind regards

  DP - K

• Users on the network cannot use the files after upgrade to Windows 10

  When I switch to win 10 people on the network cannot use the files on my computer

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1 is this computer connected to a network domain or home?

  2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?

  In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-network-file-sharing/18fba63e-7b6c-46FE-BA23-575a634fcee8

  Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.

• When you use the question mark, appears like a capital E with accent French and cannot use the quotes.

  Original title: I can't use my question mark (rises like a capital E with accent French and cannot use the quotes)

  I'm having a problem from time to time with my ability to use marks quotaion, brands etc. How can I treat it DEFINITIVELY the question.

  Thank you

  Hi golfnut11,

  1. you are using a laptop?

  2. you remember to make changes to the computer priro to this question?

  Step 1:

  If you use a laptop, check if the FN key is enabled. If so, then try to turn it off and check.

  Step 2:

  You can also try to check the keyboard on the screen and if the problem occurs or not.

  Check out the link:

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  If you use a Microsoft keyboard, you can also consult the following article:

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Hope this information is useful.

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• WES7: 'Windows cannot access the installation sources. "Check that the installation sources are accessible and restart the installation.

  I try to install Windows Embedded Standard 7 on an vacuum Compact Flash 4 GB but when installing, I get an error message "Windows cannot access the installation sources. "Check that the installation sources are accessible, and run the Setup again."

  I created an answer file with the Configuration of Image Editor and I created an Image of the IBW of my answer file. All the files and the Image of the IBW (738 MB) files are copied to a USB bootable 4 GB. I inserted the Flash DRIVE to a computer with a Compact Flash 4 GB (which contains only a primary NTFS partition set as Active) and it starts on a USB key. IBW Wizard starts and I followed the instructions until the disk selection step. I chose the disk and partition of Compact Flash and I press the next button. First 2 installation steps manage (copy of Windows files and extend Windows files) but 3rd step (installing features and updates) failed with the error message "Windows cannot access the installation sources. Check that the installation sources are accessible, and run the Setup again.'.»

  I tried to do the same thing with a Compact Flash 4 GB, which contains 2 partitions: a primary NTFS defined as active and a system partition, but I got the same result. Then I tried to install it on a Compact Flash 8 GB which contains 1 single defined primary partition as active and I managed.

  Problem is that I must install on a Compact Flash 4 GB.

  Can someone help me please?

  For Windows Embedded-related problems, please post in the forum on TechNet:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsembedded