Photosmart 7510 does not illuminate.

Similar Questions

• Photosmart C309a does not illuminate and its power adapter 0957-2259 LED flashes.

  I have a Photosmart all-in-in-one C309a.  A few days ago I started to receive messages from the ink system dailure, with the 0xc19a003e code.  I followed it to corresponding to a unit of printhead failed, so I ordered a replacement parts HP UK store on Friday, October 14, and it came today, Monday the 17th. Great rotation of the order of HP UK - thank you.

  When I came to adapt to the new print head today, the printer does not illuminate.  No sign of the power of the power button, the buttons command or display.  The power adapter (model number 0957-2259) has a green LED which was (and still is) very quickly - flashing several times per second.  After that the power had been in the power adapter for a while (several tens of minutes I think, I wasn't timing it) noise started coming from the inside of the printer.  It is a kind of regular knocking and seems to echo the led blinks - but there was still no sign of power - including no movement of the ink/printhead assembly.

  I tried to find suggestions online and I've seen a few posts on some websites that suggest that the adapter can be unloaded in some way - but they are almost exclusively on the PC.  Posts read as if there is some kind of capacitor which accumulates (too) charge and discharge it restores the adapter to the operating state.

  I just reconnected the power again to see if there is no change.  After about 10 minutes, hit him coming back for a few moments then stopped.  I noticed that the LED on the AC Adpater was green fixed so I tried the power switch on the printer and it began to start.  But then hit him came back, the display panel started flashing white light and then complete disappearance of signs of life (other than sound knocking, which became intermittent, maybe 5-15 seconds each time).  The LEDs returned to.

  And then after maybe 20-30 minutes with the power, the printer finally tried to start, the light of the AC adapter / CC has been stable and my computer thought that the printer was (briefly) online.

  But the adapter light started blinking and now the printer behaves as if it has no power.

  It seems to me that the symptoms is due to a problem with the AC adapter.  Then

  (A) that seems reasonable?

  (B) is there a way to release or otherwise 'fixing' the adapter?

  or (C) is it better/more safe to replace the adapter?

  TIA,

  Chris

  The adapter can be reset as described here.

• 7510 Photosmart HP e-All-in-one: Photosmart 7510 does not, tech help links not working no more.

  My 7510 Photosmart was working fine just a couple of days, but suddenly, I have a problem: he will pretend to be printed, but there are only a few weak gray lines (which do not match with the document being printed).  I tried the links online to HP technical support, but they all fail, with messages such as:

  Internal Server Error - read

  The server has encountered an internal error or misconfiguration and was unable to respond to your request.

  Reference #3.9733fea5.1428886261.1ce573bc

  The ink cartridges are all quite complete, except for the small black - the big one is full.  I got no error message.  I have reset to factory settings, without success.  I was printing a PDF file.  I don't think that the problem is with the computer, because I tried to print with another computer, with the same result.  The computer is a PC, in Windows 8.

  Help!  I need to print an extension with the IRS!

  Hello

  Please try the steps below...

  1 > while the printer is turned on, open the cartridge door. Check if the ramasseherbe moves automatically.

  2 > wait until the printer goes into silence.

  3 > try to manually move the carriage.

  4 > if the carriage does not move, it could be a ramasseherbe jam. You may need to check if there is a paper jam in the field of transport.

  5 > remove print head, close the printer cover. Unlug if power cord back of the printer.

  6 > wait 30 seconds, and then reconnect the power cord to the back of the printer.

  7 > install the print head and cartridges when prompted.

  If you the problem persists, please call HP Tech Support for assistance because he clould be a problem with the print head.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• All-in-one printer, HP Photosmart 7510 does not recognize my computer as part of the network.

  Range of all-in-one printers, HP Photosmart 7510

  The function scan of my 7510 new does not recognize my computer as part of the network. (He said that the scanner can not find the computer)   It prints fine from the computer, however.  HP ran diagnostics and cannot find the problem in their system.  Suggested that I try to find a solution to the millisecond.  I was unable to find a solution yet.  Can anyone help?

  Hello

  I suggest try to connect your printer to the computer and check if the scanner works.

• HP PhotoSmart 7510 does not print

  We have installed and had the HP PhotoSmart 7510 up and works fine on our wireless.  Then, we called HP to download an application.  HP technician decided to 'fix' our PC.  While working on this issue, we started to notice that MS applications were disappearing.  They told him to stop and he did.  But he was not able to restore the PC or applications.  We spent 4 hours with Microsoft in order to get things to where they were.  Since then, we did not have the ability to print on the printer.  The printer thinks it connected to our wireless and can make updates or less says that we have the current software.  But our PCs and laptops can not find on the wireless.  I noticed you said someone else to check the IP address of the printer and that he shouldn't be 169.254.  The IP of the printer is 169.254.237.217 and I can't change it.  It is the problem and how do I change the IP address?  The wireless is configured with the channel 11 and WPA and I don't want to monkey with it.

  169.254.237.217 is an IP address not valid. I would try the printer connected to your wireless network. To do this simply use the front panel of your printer and use wireless configuration wizard.

  Let me know if it helps.

• Brand new Photosmart 7510 does not connect to Web Services

  Nice day! I am trying to solve a problem for a customer and I hope that someone can help you. I found a couple of other discussions with the people affected by this problem, but the solution did not help. My client has a Photosmart 7510 is all new and it made me get setup for him. The printer is configured, connected to its wireless network, the software is installed on his PC 3 and I can print of each of them. However, we are not able to activate the Services Web is a key reason that he bought the device.

  When we try to turn on Web Services, the printer successfully checks for an update (none are available) but then times out during the server communicating with Web Services... scene. I get the same result if I try to activate Web Services via the printer, thanks to its web Interface or via the installer driver on a PC. Depending on the Network Configuration Page, the printer is properly take an IP address (including DNS) from the router. I tried to set an IP through the web INTERFACE as well by changing the DNS servers 8.8.8.8 and 8.8.4.4 with no improvement. I tried power cycling router of my client and I also tried setting the parameters of encryption on the printer manually instead of using the automatic mode. All computers, my laptop and iPad can use Internet very well, but Web Services will not be activated on this printer.

  Is there any other suggestions that I can try? Is it possible that Web Services are just down right now? This particular unit is defective? My client bought this partially to access ePrint impression from his iPad, so it is essential we get active Web Services. If anyone can help, I would be very happy. Thank you!

  Hello PXAbstraction,

  The servers are being updates not scheduled at this time.  The best thing to do is to wait 1 to 2 hours at least and to 24 hours, then try again.  If this is not enough, let me know and I'll see what I can do.

• : HP Photosmart 7510 does not print port cn25u3501f05px

  Printer does not print.

  Failed to remove 'which is printing' point-tried cancel, delete, interrupt and restart, turn off printer, even the fact of unplugging the printer and repluging it.

  The port is cn25u3501f05px, but I don't know if that means anything.

  Hi @Susie12345

  I moved your posts to keep them together rather than trying to keep track of our conversation on multiple threads. Please use the following steps to remove the software and reinstall it again;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• Photosmart 5520 does not illuminate

  Hey,.

  After disconnecting and reconnecting the printer on the wall, it shows no signs of activity more.

  No lights are on (outside and inside the printer) and we can not turn on with the switch. It worked fine before. We tried several places where we can connect the printer, nothing has changed. We also tried a different cable, also did not work.

  It is not in sleep mode I see on the internet, it just shows no signs of life. Also it does not resemble the broken delayed or anything.

  Any help is appreciated!

  Maikel-

  Maikel Hello and welcome to the Forums of HP.

  I see that you are having feeding problems.  After reviewing the matter, it seems that you have covered most of the troubleshooting steps.  At this point, the best recommendation I could do would be to contact HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

  Thanks for posting on the HP Forums.

• Photosmart 7510 does not print on photo paper

  I have photos saved on my computer.  When I try to print one, the picture come out on printer paper, photo paper, I installed.  I lost so much ink to try to understand this point, and I'm sure it's probably a simple thing that I do not. Can anyone help?

  I checked to make sure that I was connected to the correct computer with HP advanced chosen paper and photo tray

  Click devices and printers.

  Right-click on the 7510 & select printer properties.

  Click device settings.

  Make sure that the Photo Tray is available.

  

• HP photosmart a636 does not illuminate

  I did not use my hp photosmart a636 for a year or two and since my parents ' anniversary, it's tomorrow, I wanted to use it to print a photo, but it won't turn! Please help me if I can print a picture for tomorrow!

  Hi jess1029

  Plug the printer directly into the wall.
  The reason for this step is because the unit has already built in the surge protector and if you have connected it to a bar or a surge protector, then the unit will get not all the power it needs to function properly and it will cause problems with false errors on the screen or turn and analysis of the issues.

  Check the connection at each end. Examine the power cord.

  Not move the printer in another room and use a different plug.

  You can try a reset of the power.

  http://support.HP.com/us-en/document/c01471652

  I hope this helps.

• 13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. unplugged

  13-inch early 2011 macbook pro. light green mag extremely shoddy security cordon, macbook pro stopped charging bought new magsafe. and the led does not illuminate or strings. SMC reset now mac does not recognize battery. disconnected the battery and security cordon mag, maintained hold button / stop for 5 seconds, nothing. Another SMC reset and it is the only way Mac powered on that she has no back light for the keyboard and the fan works on high all the time, please can someone HELP, thanks.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

  iPhone 6 with iOS9.3.4.

  WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

  You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

  Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

• My MacBook Air does not illuminate

  MY MacBook Air does not illuminate?

  Nothing happens when you try?

  Power light?

  Tones? Startup chime?

  If you connect to the charger, which is LED color on the card?

• iMAC does not illuminate

  MY iMAC, which is several years old does not illuminate

  Take the test/diagnosis. Nobody here can 'pull' hardware problems.

  Barry

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.