Photosmart 7525: Scanning and Capture allows more scanning black and white. Only color or gray.

Similar Questions

• HP Photosmart 7525: Scanning under MacOS Sierra is no longer working.

  Recently upgraded to MacOS Sierra (MacOS 10.12).  Since then, my HP Photosmart 7525 is no longer allow me to save the scans to the computer.  The "Save" button is gray and impossible to be clicked.  He'll copy, print and scan documents, I just can no longer save to my computer.

  When I enter the HP utility > settings > scan settings > scan to the computer, the software scans my system, then gives me an error message that says:

  "Scan of the computer can not be activated.

  The HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest HP recommended software for your device to http://www.hp.com/supportand then try again. »

  I completely uninstalled the old driver software (which says that HP should run on any Mac OS after 10.6) and reinstalled the latest drivers that it is compatible for the 10.11 and later.  I always get the same answer.  Printer will print, will copy, will scan, but not save to the computer.

  Yes, I already rebooted one device at a time, and Yes, I disconnected and reconnected all devices in separately.

  What can I try next...?

  Hey there.

  EASY SCAN can be installed, use 1.6.0 - works well with SIERRA.

  Kind regards.

• I want to print in black and white only on my hp photosmart 6520

  Photosmart 6520 windows 7 How do I put this so it prints only in black and white not color at all times.

  Hi macys.

  Welcome to the HP forums!

  Implemented a Photosmart 6520 for black ink only from your Windows 7 computer? That I can help with

  You will want to start devices and printers (via your control panel) with access to your folder and right-click on your Photosmart 6520 icon and select Printing Preferences. The window that opens will be similar to the display on the left of the screenshot below. On this screen you click the Advanced button, and then you will see a screen similar to the one on the right of the screenshot. There, you go the black ink only setting and press OK. Press and then apply on the previous screen before pressing OK again. The driver will now be on use black ink only.

  

  Let me know if that does the trick for you!

• Why can I not print in black and white only?

  Why is the HP Officejet Pro 8600 more unable to print black and white only if the black cartridge is not empty?

  What I mean is that I went into the settings to set the printer to print black and white only but also print text in black only.  Yet, I HAVE to replace the cyan, magenta and yellow cartridges, because they are exhausted.  Nothing to do with black printing, whereas a SEPARATE black cartridge is and is always full should cyan, magenta and yellow ink?

  I'm aggravated about how the driver for this printer is designed TO FORCE me to buy cartridges not black when I deliberately put printing be BLACK ONLY.  I'm unable to move forward with my impression.  This is considered to be a show-stopper and is unacceptable as the setting that I've assigned and exhausted cartridges message contradict each other.  If the adjustment is made for print in black and white only including text, then print black and white, because I know that the black ink is still available.

  Take into consideration that printing may take place at any time.  Not being able to use black as my other color (WHICH IS NOT EMPTY AND IS A SEPARATE CARTRIDGE) forces me to stop.  I can't go forward until the store open.  Wal-Mart isn't always an option.   It's lost time.

  The inability to switch to self-supply to meet to use the black cartridge is only a waste of time.

  Call it for what it is, a form of ransom. HP wants me to spend the money on the color cartridges that have nothing to do with black and white printing.   When I am ready to print in color, which should be a time of my choosing.

  Either way, the form, which I am trying to print is black and white only.  No color is on this form.  It is foolish to force printing in color to a black and white document.

  Hello

  Specially protect the print heads printers much NEED other inks even they only print in black. During the warm-up process, printers require all inks so they can stop before we continue. Some printers allow printing (especially those who have the ink tank three colors), but they can print at a speed of snail baby.

  Kind regards.

• OFFICEJET PRO 8600: PRINTING BLACK AND WHITE ONLY

  Printer does not print in black and white only, even if this option has been selected by "Printer properties" or "Printer Preferences".

  Please read this post then provide some details.  There the error messages on the computer screen or the printer?

  The Officejet Pro 8600 series has separate heads for printing and ink supplies.  To protect the print head of damage the printer requires all inks to be present to print in black only.  If one or more of the inks are exhausted, they must be replaced to allow printing.

• How can I make my officejet 6500 a print in black and white only?

  I am trying to print documents, not photos, in black and white.  The computer is a Macbook Air.  I'm looking for the manual, and I don't see how to set up printing black and white document WITHOUT PRINTING FAST current of AIR.

  Thanks a lot for helping me with this.

  I prefer, if possible, to make the default for printing black and white documents (which are not fast drafts). ***

  Hi @presentmomentum,

  Thanks for getting back to me.

  Here's how to adjust the color temperature:

  When you go to print a document, click on "Show details" (next, where it says PDF). Then click on 'TextEdit' and click on 'Type/quality paper.' From there, you can select the grayscale, black and white or color and toggle various levels of quality (Normal, Best project). If you use the grayscale function, you can choose just to use the black cartridge only.

  Let me know if it helps. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the "Thumbs Up" icon below by clicking on "Accept as Solution" (this will help others find the solution).

  Thank you for being a part of the community of HP.

  Have a great day!

• Printing black and white only?

  HP Officejet Pro 8620

  Is there a way to make the printer print black and white only?

  Hi oldstrings,

  You can change the characters to print grayscale (using a black ink only).

  I extracted the advice of setting of printer for windows and mac.

  Alternatively, you can check out the link to reference guide user below.

  http://h10032.www1.HP.com/CTG/manual/c04204791.PDF

  See you soon,.

  Bryan

  

• printing in black and white only on the all-in-one HP Officejet J5780

  I am trying to print page 2 of an article of web in plain black and white.  However, the upper part of the page is red on the web, the main part is black and white only.  No matter how clearly, I insist that I want simple black and white, what I get is the page, printed in red.    The printer does not do what I ask.  How can I fix this?

  Hi daniel199,

  You get the same problem when you try to print from another internet browser?

• Printing black and white only (no gray scale)

  I have a Windows 7 (64 bit) system with the HP Deskjet 990cse printer.

  With Windows XP, I was able to print black and white only (no gray scale), but now with Windows 7, it seems that I can't print black and white only (no gray scale).

  Is it possible to print black and white (no gray scale) with a Windows 7 (64 bit) system?

  Great Information BOB!

  @n__l__b, let me know is post bobs solves your problem!

• HP Photosmart 7525: Scan feature installation and configuration on HP Photosmart 7525

  How can I install / set up the scan on the HP Photosmart 7525 function.  I never connected when I bought the printer?

  Hi clipper91,

  Thank you for your answer!

  To find out if you have the full feature software and drivers installed, go to Macintosh HD/Applications/Hewlett-Packard, and then double-click the HP Scan icon. If there is not an HP Scan icon, then the software has not been installed.

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• Photosmart 7525 scan to mac... Help!

  I recently bought an iMac (OSX 10.9.4) and a HP Photosmart 7525 e-all-in-one printer.  The print and fax work fine, but I can't scan to my computer.

  I installed the HP software on the HP download site, but I always get a message on the printer that says "any computer" how to fix this?

  Hi @mfspectrum,

  I see by your post that you are unable to scan. I can help you with this.

  Enable the analysis of parameters of the computer. A "no computer detected" or "Connection error" message while scanning. Go to Solution two: check the Scan to the computer, the first step setting: check the Scan to the computer setting.

  Check the name of the driver that is installed by the printer. Airprint driver could be installed instead of the printer driver. (usually by default, Airprint)

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, then it of the Apple drivers, remove it and add the name of the printer back in the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Try and start a new search.

  If you need help, let me know.

  Good day!
  Thank you.

• HP Photosmart 7525 scan in color

  I just bought this printer and when I scan multiple documents color using the manger, they come out in black and white.  Is it possible to scan several documents by their food in the feeder?

  Thank you!

  Hi @pro-v1x ,.

  I understand that you are not able to scan several documents from the ADF in colour. I would like to help out you
  with this issue today.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I have provided a document for how to scan multiple pages and how to change the settings for scanning. Please select your operating system from the list. Scan.

  The HP software, it will give you the ability to scan in color. The binding of advanced settings, uncheck the option to create a new file for each analysis, or combine multiple in one file scans, if you want multiple documents to save in a file.

  If you're still having problems, try and make a color copy.

  What operating system do you use? How to find the Windows Edition and the Version on your computer.

  If you need help, let me know.

  Good day!
  Thank you.

• 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

  I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

  Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

  That is what it is? How can I fix?

  Afternoon @MSWS,.

  I can help you with the printing settings in Open Office.

  It seems that this program has its own options that can bypass the default print settings.

  I found this page of support which may help you with the settings. OpenOffice - control print  

  Thank you

• Director of Windows capture only in black and white no color

  while trying to capture video from the color, it captures only in black and white

  Does not appear to be a 500 GB hard drive, but it can be
  a partition that uses a part of the training. In any case...
  you have enough free space and that's what I was afraid
  everything.

  I think it may be interesting to try to update your video driver.
  There is a recent version (18/01/2011) for your Nvidia Geforce
  6800 video card.

  GeForce/ION Driver Release 266.58
  http://www.nvidia.com/object/WinXP-266.58-WHQL-driver.html
  (do not forget to consult the list of "supported products" to check that)
  your video took card supported)

  A way to check the make and model of your video
  adapter is to launch the Device Manager by clicking on...

  Start/run and type or copy / paste:

  devmgmt.msc

  And then press ENTER.

  Expand "Graphics cards" by left clicking the +.

  Right-click on the name of your card and choose...
  Properties / driver tab... This will display the name,.
  Version number and the date of the driver.

  Download the updated driver for your computer desktop and the left
  Click to install. There is some info to install it at the following
  link:

  NVIDIA driver help
  http://www.nvidia.com/object/drivers_faq.html#installing

  Personally, I think it's a good idea to disconnect from the
  NET and close all programs, especially of before virus scanners
  installation of the driver.

  If you decide to try it... maybe... I mean just maybe you
  will be able to capture your video in color.

  Good luck...

• Lightroom black and white to color

  When I download my pictures from my camera to lightroom 2.2 it takes pictures that I shot in black and white and converts them into color t-anyone knows if there is a setting or a way to avoid this?

  Hi Andrew

  I'm assuming that you are shooting in RAW. If you take photos in JPG format, you will get the black and white photos. The reason why you see a black and white in reading on the camera must be because the camera shows a preview in black and white.

  Fortunately for you, RAW capture red, green and blue and combines them into a picture, your photo. If the RAW converter in lightroom necessarily combines the components, which makes a color image.

  It's a good thing. RAW images capture as much as possible, if you have a lot of information and details for a shot as possible.

  Black and white conversion in lightroom allows you to play with colours by photos. If she has imported black and white you would have lost so much information.

  What if you came home for a shoot and directed a shot could have been great in color, or you rushed to film a sunset forgetting that the setting was on black and white...

  To make the lightroom import photos in black and white, you will have to do a develop preset.

  more simple way, forgive me if I'm teaching to suck you eggs.

  1. open lightroom

  2 goto development

  3. click on shades of gray in base salary

  4. right click on the thumbnail on the bottom which is now black and white go gold the PRESETs on the left of the screen by opening the Panel if ifs not here and click on the +.

  5. enter a name of the preset - import IE black and white

  6. Select Auto Grayscale Mix

  7. click on create

  1 preselection made

  To import

  1. click on library

  2. click on file and import - from the disk, the system...

  3. Select the files you want to import as a black and white, check them while they are selected

  go to the development parameters

  has chosen the basic settings and

  According to the information to apply develop settings and select from the drop-down list select import in black and white

  and then import it.

  The pictures you have selected then will be black and white.

  It will work - you may need to remember which photos were black and white as thumbnails in the import dialoge may not be black and white.

  I'm not black and white I want to play with the color that I made in black and white.

  Mode shooting black and white means that you can NEVER have a color version of the photo, so you may lose is a beautiful photo of your bet.

  As you use Lightroom, you're messing around with the images, so shoot color, and then click Grayscale and play them with the mixture of shades of gray, you'll have a lot more fun.

  But who is mentioned above process will bring your black and white photos.

  Hope that helps you

  (I still shoot color and convert every time - even if jpeg)

  Hamish

  www.hamishniven.co.za