Photosmart all-in-one c309g is connected, wireless, print runs, analyze a computer.

Similar Questions

• HP Photosmart all-in - one a 309 will not print from the main computer in network

  PULLING MY HAIR OUT and have spent endless hours trying to figure this one already, so any advice will be appreciated! This 'deal' of a printer had problems in time over the 18 months or so I got it, but this one takes the cake. My HP Pavilion 6140, Windows 7, 64-bit, isn't wireless, but is connected to a router. My 309 a is wireless, but is in the same room near my computer and is recognized on the network. My husband's computer is sitting across from home in his office and can print wireless from my printer. Sitting here beside him, I can't print anything. We were able to print test pages from it to my computer, but if I go to another file of any type of printing, the printer does nothing. We have uninstalled, reinstalled, tried drivers d/l. He tells us that we need a driver, but when we go to d/l, it says no driver needed, or your drivers are up to date. My crazy husband DID with the router last weekend, on the moment cela everything has started, but since he checked it out, and everything seems fine. Copy the scanner work very well, so printing them isn't a problem either. I can save a file from my computer to the network, run in there and shoot to the top of this file and send it to my printer to print. No problem.  So, can anyone please give me any suggestions as to why my computer is unable to send anything to the printer or the printer does not recognize. Control Panel says it all works well, and the printer is ready. If I go into the properties of the computer, it says "drivers for this device are not installed, code 28. We had other messages of error as well in recent days, but nothing has been solved little matter what we do. Also MY computer doesn't list MY printer in the choice IF I try to print, and it says "printer unknown error has occurred."

  HardBeatZ, I wanted to just say a last thank you for all your help with my computer/printer problems. I hope I won't need this forum in the near future, because once again, I had to choose a different password. Yikes! In any case, we've been on all the roller coaster of emotions these past few weeks. Once you and I spread the printer as being the problem, we have debated on buying a new computer or reload Windows. After shopping and comparison of computers and prices see on them, etc., we decided that we had nothing to lose. So we borrowed an external drive and loaded important data and reinstalled Windows. Once we did that, we could still see the printer on the network, and it would still print from her husband's computer, but not mine. However, it DOES not seem to take care of other issues, and the dreaded exclamation point next to the PC icon has disappeared, so I'm gutsy and reinstalled the printer. For some reason, it still does not work wireless from my computer (which he always did), but I plugged the USB cable and returned to printing, scanning and faxing capabilities. so, I hope that all is well now, and except for paying ridiculous shipping for return monitor (still in warranty) which is released before printer problems, we did not have to shell out the $$$ for computer or printer. Monitor is shipped to me right now, so here's hoping that $$ on shipping was not in vain. Now if only we could be repaid in $$$ for the moment, concern and effort we all time put them into this mess. It WAS definitely a learning experience, even if, in the future, that I'll be a lot less worried to the excavation to solve problems. Thanks again for your time and patience.

• Photosmart all-in-One b210a: Black is not printing

  Hello world
  I have a problem with my printer, a Photosmart all-in-One b210a, connected wireless to my network. The problem occurs when printing: it seems that the printer doesn't print anything that uses the color black or black color itself.
  I tried to clean the print head and it only prints the other colors (one line). I tried also to change the ink cartridge, but nothing to do; I tried to align the cartridges aaaand it is said that the alignment is not (it only printed the blue lines) and everything in the Tools menu, but not reset the configuration.

  I also tried to print 10 Windows and OS X (a color and a black and white document). The same result at a time when black and white document printing: not black.

  Any ideas? Thank you.

  Alexander.

  Hi @AlexandrCerutti,

  Welcome to the Forums of HP Support!

  I understand you are having print quality problems on your HP Photosmart Wireless e-All-in-one printer - B210a

  Printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you did most of the resolution of the problems already. The print head is probably clogged or will need to be replaced.

  NOTE: I would be cleaning several times to try to resolve the problem with the print head.

  Please confirm that you have tried the steps in this guide: HP Photosmart Plus B210 printer - color or black ink printing not.

  If the problem persists, the print head should be cleaned.

  Check the status of print head warranty:
  If you have a faulty cartridge or print head, it might be under warranty. To check the warranty on your ink supplies, go to tohp.com/go/learnaboutsupplies, select your country/region, and then review the information of limited warranty for your supplies.

  Printhead replacement games are available from HP customer or authorized service providers assistance.
  ATTENTION: Wait until you have a new available print head Assembly before you remove the ink cartridges. Do not leave the ink cartridges out of the printer longer than 30 minutes. Can result in damage to the printer and ink cartridges.

  If the printer is out of warranty, you can try the procedure in the video below. Please use at your own discretion.

  Video: Manually clean the print head on the HP Officejet 6500 printer

• 8600 Officejet pro all-in-one: 8600 cannot connect wireless Officejet

  Unable to connect wireless when adding the printer.  I can see the IP address and the name on the report to the printer, but can not see the printer when I try to log on my computer.  It worked fine until I loaded the latest patch. It's the same thing with another 8600 and I got to the wire that one for the router to print.  This 8600 is too far from the router to run a cable (at the top). (only about 20 feet of actual distance.) I see that the printer is enabled on the router.  I tried to add the printer to the computer with the IP address and the hostname without success. We were working wireless until today.  I've uninstalled and reinstalled the driver without success.  Still do not see the printer.

  Any suggestions?

  I forgot to say that I fail to see the printer wireless to 2 separate computers - an 8.1 and other windows 7.

• 7510 photosmart all-in-one does not connect

  Hello

  I desperately need help.

  My printer was working fine, then yesterday morning it just stopped.  I couldn't get the wireless connecting once again, so I uninstalled, re-installed, downloaded and installed the new drivers.

  NOW, when I go to set up on my mac, to add the device to finish setting up once again, does not appear the unit even if the wireless is connected.  When I print the Wireless 'report' everything is connected correctly, IP address works etc.

  Why it won't find my device?

  Thank you.

  Colette

  It worked perfectly! 1 million thanks!

• 7520 photosmart all-in-One: sudden problem connecting to web services

  I used my HP Photosmart 7520 years without problem scanning to e-mail. Now I get "Unable to connect to Web Services" error message. I also have a server connection error appear together try to print selections on the screen of the printer - such as the activities of crossword puzzles, sudoku and children.  How can I fix it.

  Hello

  From the Configuration menu, select Web Services Configuration.

  Select Delete Web Services and confirm any command prompt.

  Now re - open the Apps option and follow the steps to reactivate Web Services.

  Once you're done open the scanning to Email application and follow the steps to reactivate Web Services.

  Provide your own e-mail address, and then type the PIN Code received in your email address and try scanning.

  Kind regards

  Shlomi

• 3520, printer all-in-one will not connect wireless

  I am running Lion on my Mac. The printer works correctly when it is connected by the USB cable. The test of the printer indicates the wireless connection is OK. But when the cable is disconnected, my computer does not find the printer so I can't print wirelessly. The computer says it is plugged into the same ID wireless. I tried to reinstall the HP software to no success. Very frustrating that the printer was working wireless for a year with no problems. It just stopped during the night. Thanks for any help you can provide... Ted

  Hi TED1234,

  There is a chance that the HP software that came with the printer may not work with your version of Lion. I recommend to download the installation here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-103382-2&cc=us&DLC=en&LC=en&OS=4114&product=5162506&sw_lang=

  After you download the driver, I recommend trying to follow the steps listed in the method three second-stage for OS x 10.7 Lion. In step 2 of the second method, there are 2 options. According to what is invited on your Mac, you will want to follow the instructions for the appropriate option.

  Please specify the details of your installation if this does not resolve your problems of wireless configuration. If you encounter error messages, please note them here and attach a screenshot of your laptop. You can take screenshots by pressing "Control + shift + 4" and the screenshot will automatically record your desktop.

  Thank you.

• Photosmart all-in-one C310a: black is not PRINTED

  Black ink stopped printing. Followed by all HP troubleshooting steps, including the verification of configuration/preferences, changing cartridge and ran HP print and doctor Scan, uninstalled/reinstalled the driver/software, disconnected printer for an hour, plugged restarted. Still does not print black. All the colors OK. Do not quality of cartridge, alignment and other test prints. What to do next?

  problem solved by cleaning the printhead again.

• Unable to access HP Photosmart all-in-one 7520e Embedded Web Service

  My HP Photosmart 7520e all-in-one is already connected wireless, but when I try to access the Web by typing the ip address, it continues to ask for a user name and password. I guess that's the SSID and my wireless router network key, but it does not work when I get it. There is no guidance on how to implement, to find this info, change or something. And, after unsuccessful attempts of 3 I'm locked. It is assinine. I need help, but can't find an answer anywhere on this issue!

  Hi ronalds173,

  I see that you are having some connection with the Photosmart 7520 problems and have been locked as a result. I think I know the area you are trying to access to, but to make sure that, if you're taking the IP address that is assigned to the printer and that striking in the address bar in your web browser?

  If so, this connection would be not the SSID and password of your router, unless you did that. This password can be reset by resetting the defaults on the printer network.

  To do this, tap the wrench in top right and then Wireless Menu . Support on the network by default and then post. Once restored, you will need run the Wireless Setup Wizard on the printer.

  Try to access the page again. Let me know if this solved your problem.

  See you soon,.

• How can I change cable on Hp photosmart all-in-one wireless?

  I have a HP Photosmart wireless all-in-one and you want to print with it connected to the computer. What I need to change the printer setting to 'OFF Wireless' for this to work? Thanks for a response.

  Try to connect the printer to the computer and the wireless off. Then, go to system preferences/printers and Scanners, remove the printer and add it again.

• HP Photosmart all-in-One Printer series - B010 with Mountain Lion (10.8.1) / Wireless printing

  I tried to find manuals how to connect my HP Photosmart all-in-One Printer series - B010 to the network in order to get wireless printing, I followed a few articles, but it seems that my problam is that I can't find a way to connect the printer to the wireless network and find wirleslly on the mac. I'm getting hard to do... someone knows how to get there? Thank you very much!

  HP Photosmart all-in-One Printer series - B010

  MacBook Pro / 10.8.1 (Mountain Lion)

  Router

  Hi yadin7,

  The Photosmart B010 model only offer USB connectivity and does not provide any wired or wireless network connectivity.

  You can find the specifications listed below:

  Input/output
  USB port: Rear hi-speed
  

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=120&prodSeriesId=4058814&prodTypeId=18972&ObjectID=c02120016

  Kind regards

  Shlomi

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• Photosmart HP 7520: photosmart 7520 printer all-in-one fell my SSID wireless

  My photosmart 7520 worked well until a few days ago.  It has stopped printing.  Wireless test report I am not connected.  I tried the wizard wireless set up to get reconnected but my wireless router number has disappeared from the list.  I typed it in manually but it won't.   Anyone know how I can print again?

  Hi @msibrox,

  Welcome to the HP Forums!

  I noticed that your HP Photosmart 7520 will not connect wireless to your Windows 7 computer. I'm happy to discuss this issue for you!

  I would say to begin with a hard reset, by going to this post, How to perform a hard reset, by @Rich1. It is important that the power cable from the printer is plugged directly into the wall outlet, not a surge protector. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  I would also like to cycle power to the router. (With the router, unplug the power cable, wait 30 seconds and plug it back.) Wait for the lights to come back and try to connect to the printer again. Installation of the wireless printer.

  If it still does not work, print a Network Setup page. Print a Network Configuration Page, let me know if something falls down, and the number of disconnects.

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• Wirth problem Scanner printer HP Photosmart all-in-one.

  How can I activate the scanner on my HP photosmart all-in - one printer?

  How can I activate the scanner on my Photosmart all-in-one printer?

• HP PSC 2410 Photosmart all-in-one printer SLOW printing

  All of a sudden my HP PSC 2410 Photosmart all-in-one printer has started printing very, very, very slowly. If at all. It took almost 30 minutes (1/2 hour) to print only 1 page word document. I am on Windows 7 OS.

  Dialogue problems says everything is fine. An attempt to print a test page was even worse. He printed only the top 1/4 of the race and that it was illegible.

  I ran CrapCleaner, Norton full scan and I was able to print for about a day before the problem returns.

  Help!

  Hey Rainbow7000,

  I also had problems with copy. I noticed that the missing parts were color text or photos. There was no indication that the Tricolor cartridge was low or empty, but I replaced it in any case and VOILA... print is returned to normal and fine everyting.

  I would have thought there would be some am indicator when the cartridge is low, but it was not.

  Thanks anyway.

  RenardB