Photosmart B110 suddenly stopped printing (Mac user)

Similar Questions

• Photosmart 5510 has suddenly stopped printing black

  I have a Photosmart 5510 new, which was working fine, then suddenly stopped printing black.  Replace the cartridge and still nothing.  Prints fine colour, but not black.  No error message, just jumps print anything in black.  Excluded bone by the attempt at analysis and still nothing.

  Yay! I'm happy now. I did the thing to chat online with technical support and that's what I got: on the front screen of the printer, press the arrow to the right, and you should see an icon "Setup." Press on that. Then press tools, then scroll down to "Clean print head." Press the key. When it's done it spits out a test page and voila! It now prints. I hope that this works for some of you all!

• HP Photosmart 5510e printer has suddenly stopped printing correctly

  Original title: fault printer

  Hello

  I have a HP Photosmart 5510e printer that has suddenly stopped printing correctly because the black ink is not getting through.  I did everything possible troubleshooting I can and replaced all the cartridges for new ones, but nothing helped.  When I did a report print quality he had no black ink on it at all. This leads me to think that there may be a blockage between the cartridge and print head. Any ideas?

  You might want to try this: failure of black ink Photosmart 5510 e-All in one series

  Using cartridges HP no also could cause this kind of problem.  Otherwise, it is usually a sign that the printhead is kaput, impossible to replace this printer print head if the printer is also kaput, on the garbage heap, it will!  That's how it is with printers, you can either pay in advance for a printer expensive hard and has lower cost of Ink/toner replacement or you can buy a cheap and pay through the nose for ink replacement and in a year or two to mix the printer all out with the trash.

  John

• Photosmart C309 abruptly stopped, printing black ink (any solution?)

  My HP Photosmart Premium C309 suddenly stopped printing black.

  Everyone recognizes this problem and has a solution?

  I tried to unplug the power plug, power switch, cleaning of the printheads several times (manually), cartridge to give a little air, checked the connections, replacement of cartridge again. Nothing helps.

  Browse the internet: it seems that this problem occurs with the most HP printers.

  See for example: some forum someone temporarily solves the problem by performing cleaning operations for (more than) 7 times, which cost five new cartridges to replace, and after a month or if the problem recurs.

  I wouldn't do this because I don't want to empty an another XL cartridge and then discover the problem recurs.

  The printer (bought in April 2010) is connected through the USB port on a Mac Pro 8Core with OS - X 10.6 (I always use only paper HP and HP original cartridges)

  Thanks for your help in advance.

  Y.S.,

  This "Absolutely" worked for my c309! He started printing gray yesterday, then I finally got the blank pages. My first thought was that HP has screwed me again! lol but I tried the post above... I have unplugged the printer for more than 25 seconds, held down the 3 and # buttons simultaneously for another 25 dry more plugged in printer and now the buttons down then made for another 25 sec.  Had to reset the lang. and the country, but after a few minutes he printed a perfect test page and I was able to print all my docs now!  It was a solution easy vs on the removal of the water and heads/cartridge, etc.  I would try this first and if it doesn't work, then you can try other patches. Thank you!!!  Good luck!

  Erisso wrote:
  

  HP Photosmart Premium C309 didn't not print black

  You have this problem too, black wouldn't pring but would be printed dark gray?

  What I did and it worked has been reset to the factory settings, unpluging the printer during ± 25 seconds

  3 and # for and other 25 seconds went and after pitting power back on

  then re-registering your setting, all wet very well

  Jumps, this will help others

• Photosmart B110 (CB4F28)-l' printer does not

  I have a Photosmart B110 series wireless printer, which has suddenly refused to print. I have a PC with windows 8 and good drive installed. HP printer control shows the printer as offline, but when I run the Test report wireless and HP Network Configuration - everything seems fine.

  All print jobs are displayed as of mistakes and being held in a queue.

  I don't know what the problem is - can you help me.

  Thank you very much

  Thank you very much for this - that I had lived this routine (a few times) without success, unfortunately. I think it was a problem of Windows 8 that all my PSA had gone offline, even if the computer and diagnosis reports showed as being online.
  I now managed to get all the elements, including the printer by fiddling with the setup - file but don't know how!
  Anyway thanks a lot for your answer

• My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time. I use a new Windows 7

  My Canon MX700 has suddenly stopped printing unless I turn it on and turn it on again each time.  I use a new Windows 7.  Any ideas?

  Thank you, schasof

  Hello

  Maybe you can use "System Restore":

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  and the date when to use your printer worked OK.

  LC

• HP Photosmart B110 while a printer - this isn't printing!

  I have a HP laptop and an HP printer B110 all in one. I used the printer a week or if there are printing from my iPad I did through Air Wireless print and it was very good. I use my laptop now and try to print; I get no error message on the computer or the printer, but when I try to print, nothing happens. I get the printer briefly area that seems to be absolutely perfect, but it disappears very quickly, as if he does not give up. The printer tells me nothing, I downloaded the last doctor Print from HP and run all the tests and everything's fine; I had a wireless network test and everything is fine; I have not changed my wireless set in place or the broadband - why on earth it does not work? The only thing I can think is that the printer is looking for my iPad, but I don't know how to find out who?  Can someone help please! I'm desperate for print, I'm on a Committee and we have an annual event tomorrow what I need some stuff for. My typical printer it is today gives ahead of me. I can't think that there is nothing wrong with it. I am running Vista as my operating system. Please:?

  Welcome to the forums @1Sandra2 ,.

  I read on the printing problem, you meet with your Photosmart B110 model and wanted to make a suggestion to you, to add, for troubleshooting, you've already tried. I mean to restart the print spooler. Here are the instructions!

  1. click on start
  2. type 'Services' in the search field.
  3. open SERVICES
  4. at the bottom, click "extended view.
  5. search for the print spooler
  6. right click and choose Properties
  7. Select Automatic from the drop-down list, close the window
  8. right-click Print Spooler and select 'Stop', wait until it stops and then again right click and 'Start '.
  9. close out Services and try your print.

  I hope that help, let me know the results! If there are still printing problems, also try to print from other programs and try to make a stand alone copy to test the equipment.

  Good luck, have a great Monday

• HP Photosmart Premium C309g suddenly stops printing wireless

  I recently bought this printer. I've set up to print wireless. I installed and uninstalled twice b/c after about three times wireless printing, it stops wireless printing. Here is the order of events.

  (1) install the software according to the instructions

  (2) test page wireless printing, that always works

  (3) other printing things the same day wireless (works fine)

  (4) try to print something wireless as 2-3 days later

  (5) it does not. Get message of the staing HP Solution Center which is obvious: Document cannot print (duh). Through troubleshooting (Windows help). It tells me to make sure that it is the default printer (it is) and then check if it is online. It is usually not. So I choose to do the printer online (which is a sub-question, and I'm sure is related to the problem, why it keeps automatically be disconnected?)

  (6) attempt to print

  (7) message appears saying that HP Photosmart C309g-m offline (Solution Center)

  (8) read troubleshooting tips (HP Solution Center), which tells me to connect via USB to print (which annoys me because there is no available solution that tells you how to restore a wireless communication between the router/computer/printer)

  (9) which I did the first time around, but find that when I connect using the USB, it prints well. Any attempt to return to wireless printing is reflected in steps 7 and 8

  (10) check the connection of the application printer wireless network printing. Indicates that the printer is properly connected wireless. I know that my laptop is on the same network b/c that's the only one I have and my internet connection is not interrupted somehow.

  (11) get frustrated, uninstall and reinstall the printer

  Repeat step 2.

  This has happened twice already, and I bought it so that I COULD print wireless. He must be troublemaker solution Quen uninstall then reinstall the printer each time that happens (up to once a week).

  I have a laptop computer, a printer and a wireless router.

  have a Belkin g MIMO Wireless router

  I own a Dell Inspiron 1520 laptop

  I have a HP Photosmart Premium C309g (bought less than 2 weeks ago)

  I do not turn off the router or printer. Rarely I have turn off the laptop. Reset the router in the past has not helped. Turning and on the printer or the laptop in the past has not helped.

  Issues related to the:

  (1) how to prevent printing to offline on my laptop

  (2) how to restore communiucation between the printer and the laptop computer on the wireless network?

  (3) how do I keep the communication between the computer laptop and printer (and I assume that the router) to go Bye Bye?

  Thank you

  Kenya

  About what you suggest, the IP address remained the same throughout the facilities and absorption.

  However, I have thought of it. I guess that the wireless connection on the printer. I went back to the office and looked at my network settings. I needed to "find" my wireless signal. The first time that I've refreshed my wireless name does not show upward. I refreshed again and POOF! He was there! So I chose and put in my password (I think that his WPA encryption). When he finished the wireless network connection, it is printed on a network status page. Given that I printed this page so many times already I happened to have an old on my desk. I noticed that the IP address is the same (although today, I uninstalled and reinstalled again) on both forms. Anyway, when I returned to my computer (which is in my living room) HP Help Center had a giant green check mark on it and said that the printer is connected. Then I printed something and it worked! YAY! It would be great if HP put in information on the way to reconnect wireless when you get this message "the printer is not connected. Who knows maybe I needed to evacuate to understand! Laughing out loud

  So for everyone out there, if this happens to you:

  1) go to your printer

  (2) select the arrow to see the next menu. (it should be on the right side of the LCD screen, it looks like a triangle on the side)

  (3) select Setup--> network--> network wireless assistant

  (4) the printer will start to search for wireless networks

  (5) choose your network (or the network you are using...  It should be the same as your computer/laptop is on)

  (6) if it is password protected, enter the password/password

  (7) your printer will print a network status page.

  (8) your computer should "recognize" the printer on the network itself. Your HP help window can display a large green check mark (it's a good thing!)

  (9) print what you want!

  * Note I guess that you may need to do this each time the printer goes into sleep mode. Its not that boring!

  -Kenya

• Photosmart B110 does not print black

  Hello world

  I have a B110 phosmart for 3 years and it has worked perfectly until last week.

  All of a sudden, the black ink is not printed correctly, in other words, there were white lines in the text printed, so I thought I should replace the cartridge, and so I did. However, even with the new cartrdige, the problem persisted.

  I cleaned manally head of black ink, but it did not work. I have also run the utility several times to clean the print heads, but I did get no result.

  If initially, I got only the problem of the white lines in the black printed text, after several cleaning cartridge in the printer utility menu, I did get no black print at all.

  So I thought that the problem had to do with the set of printheads slot, so I replaced it.

  But, unfortunately, after having changed the entire site of printheads, I can't always print in black.

  I normally got the other characters of colour, but not black.

  What could be the reason?

  Please note that I already read all the pages on the standard resolution (http://support.hp.com/us-en/document/c02046460).

  Thank you for your help,

  Bruno

  Solved! I am even more convinced of obsolescence are scheduled for my printer.

  I solved my problem and you know how?

  I have "dupe" of my printer.

  The print heads are in good condition (I bought new print heads) and I had already perfectly cleaned up the chip in the printer. So why not print?

  Whenever I changed the entire site of printheads, printer makes a procedure of 'mysterious' duration of 4 minutes.

  After changing several times the new and the old sites of print head, printer has started printing black ink, again initially lightly, then normally.

  So, what happened? As I said the printer was quite in the right order, the inks were original and I had followed any other procedure.

• MY PRINTER SUDDENLY STOPPED PRINTING MY PHOTOS.

  First of all, I have a HP Photosmart C4700. I was always able to print photos with no problems. Today I prints then suddenly that my photos are coming in white. So I tried a few times again and again Virgin. I printed something on paper and he fine print, ink and everything. I always use HP ink cartridges. I decided to share those printer for the new pack and I can still print pictures. I'm still using HP Advanced Photo paper. I have troubleshooted this myself, but I have had no luck. I don't understand why suddenly it ceased to print ONLY the photos. Does anyone have any ideas?

  Hello Raineva,

  So when print us the colors, it seems empty, but when we print in black, then only it works. It tells me that there is a problem with the color cartridge. Whether low is causing this not work correctly, or it may need cleaned.

  Take a look at this article troubleshooting Troubleshooting print quality problems.

  Skip to the section titled Solution 6: print and evaluate a diagnostic print quality report and resolve defects.

  When you run the report, see if the ink color doesn't even appear. If she let's try cleaning cartridge before we decide to replace it. To clean the cartridge, go to step 4: clean the cartridges using an automated utility and step 6: clean the area around the nozzles.

   

  
  If after this the color ink still does not work properly you can try to change out to see if the problem corrects itself.

• My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

  After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

  What router?  Reboot the router by pulling its plug momentarily.

  If this does not work, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• HP 5530 e printer: my 5530 has suddenly stopped printing.

  My e-5530 not printed. The connectors are properly connected. Blu-tooth is running. I have the e-mail address of HP. The printer worked fine before.

  Thank you

  Hello AnnieRooney65,

  I want to offer a helping hand with the printing problem, that you have with the 5530 LIKE. You are unable to print, by means of printing, or you cannot print from the computer too? You have errors or blinking lights on the printer? Running the HP print and Scan Doctor can help us to determine what is happening, whether it's a hardware problem, driver problem.

  Start printing and scanning Dr. choose USB connection or wireless (based on the current connection) and allow to know the results.

  Hope to hear,

• My printer suddenly stopped printing. I get an error messeage status. When I troubleshoot it, I get printer Lexmark 4600 cannot be contacted over the network. Can someone please help!

  My printer is wireless.  When I hit print nothing happens.  There is an error message in the State.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

  I have a new HP Office Jet 6700 Premium

  It worked very well, wireless printing from my iPad.

  iPad displays a window that recognizes the printer, but it does not print.

  There is no error message.

  The steps below a usually resolve the problem you are experiencing:

  1. turn off the printer.

  2. completely turn off iOS devices (hold sleep and home buttons simultaneously until a message appears prompting you to "Slide to power off". Drag on this bar, and it should completely turned off).

  3. turn the printer on.

  4. switch on the devices iOS back.

  5 try printing again.

  These steps usually fix the problem. If they don't, try these additional steps:

  6. power cycle your router (usually done by unplugging the power cord from the router, wait 20 seconds and in him plugging back in).

  7. ensure that iOS devices and the printer are connected to the same network, and then try to print.

• MG5320 has suddenly stopped printing. Have cleaned nozzles several times, including a thorough cleaning.

  MG5320 will not be printed.  Nozzle check shows as cyan and magenta.  New cartridges, no error message.  Simply goes through the motions, and will not be printed.  Machine is only about a year...

  Hi maricota,.

  Perform deep cleaning did not get the nozzle test to print properly, it is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.