Photosmart B210 trouble with yellow ink

Similar Questions

• Problem printing HP Photosmart series 4100 with black ink cartridge

  Although the two black ink cartridges indicate that they r at least 1/2 they full r impression as if they were empty. Pale color impossible to read. What is the problem?

  Hi Bialy,

  I found the troubleshooting guide for the issue of fading print.

  Please try and let us know the status.

• Photosmart 7520: hp photosmart 7520 yellow ink cartridge will not in (pop out of space)

  I tried to install two different new HP 564 XL yellow ink cartridge in my Photosmart 7520. They arise constantly from their slots. I managed with the magenta cartridge that is similar, but the yolks do not remain in place. What is the solution?

  Hi Rebmark, I did some research and found a troubleshooting page that describes some steps that might solve this problem.
  
  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/document/c02944025

  Step #9 may be the answer you're looking for. When the ink cartridges is not properly connected, it can help try gently bending the cartridge tab try to avoid to bend this tab over a half inch, as it could damage the cartridge.
  
  I hope this helps, but let me know if you're still having problems!

• Photosmart B110a yellow ink went Brown (HP364 cartridge)

  On December 24, 2013, I replaced all three colors HP364 ink cartridges in my Photosmart B110a as they were exhausted. (The black cartridge didn't need of replacement). Today (21 January 2014) I noticed that the colors were bad printing; a race of 'print quality' showed that the reason was that the yellow cartridge, while always 75-80% full, was in fact the Golden impression. The withdrawal of the yellow cartridge, I noticed that the stamp was no longer a yellow/orange color, but was in fact a darker tan/brown color. A 364 yellow replacement cartridge and a clean print head have solved the problem, but I would like to know four things:

  1. Is this a common problem? The guy where I bought the replacement cartridge said he had heard of that happens (specifically with yellow HP cartridges and specifically 'Brown printing') front.
  2. Is he likely to damage my printer permanently? Is the oxidation or whatever it is the yellow ink that is likely to cause damage to the print head itself?
  3. If it still happens once can I claim for a warranty replacement cartridge (and if it does not damage the printer at all times can I claim repair/replacement of the printer under warranty although the printer itself, which works perfectly, is no longer under warranty?)
  4. The printer is slightly used. I can avoid this by making a color print (of anything, even a page "print quality") at regular intervals? If so, what type of interval? And if that's the case could it be documented somewhere?

  It is a 'real' HP 364 cartridge (supplied by Argos to the United Kingdom, manufactured in Czech Republic and with a warranty date in 2015), not OEM, not recycled, either said in passing.

  Hello tonyinselby,

  Welcome to the HP Forums!

  I am pleased to learn that you have been able to get the problem solved.

  1. it is very difficult to say whether this is a 'common' problem with the yellow HP364 cartridge. Without the complete troubleshooting with the cartridge, I can't tell what the more precisely caused the problem. Sometimes Yes, like all other products, some have flaws.

  2. no is not likely to cause damage to the print head, you are able to use the yellow replacement cartridge.

  3. According to the guarantee of the cartridge, and the printer warranty. It is possible to have the cartridge, printer or replaced. To do this well you will have to contact HP Support at the time of the question, because I can't guarantee what options are available to you.

  4. with printing in color at certain intervals, this can help with the print quality, as the ink is not just sitting there. Keep in mind also that your printer does its own maintenance as long as it stays on. You can also run a cleaning print head to properly maintain the printer.

  I hope that this answers your questions .

  Thank you.

• new yellow ink cartridge (564) do not correctly print Photosmart HP 7510 e-all-in-one

  My Hp Photosmart 7510 e - all - in - one... I replaced the yellow cartridge XL 564 and I am getting yellow streaks... when printing a report, yellow is barely noticeable, with black stripes.

  Is this a faulty new cartridge?  Help, please!

  Carol

  DUH!   A senior moment here... I pulled out the yellow ink cartridge replaced by another new... at that moment, I realized the orange tab 'pull' was still attached.   Once I got his shot and re - insert the cartridge, it was fixed!

• I get the 0xc19a0042 ink system failure on my HP Photosmart B210 printer

  I followed the instructions for disassembly and cleaning the printhead twice, as well as to disconnect and reconnect and the 0xc19a0042 ink system failure message continues to show and I can't print or scan with my B210 printer. I now seek to replace the print head, but could not find the info on all the links from HP that I have searchded. Any help suggestions greatly appreciated.

  And if you are in the United States and want to order it from the hp online store: http://www.shopping.hp.com/en_US/home-office/-/search-Browse?SearchParameter=%26%40QueryTerm%3DPhotosmart%2BB210%2Bprinthead%26prodsubgrp%3DPrintheads&PageSize=15&SearchTerm=Photosmart+B210+printhead

• HP Photosmart Plus B210 Series new magenta ink cartridge prints do not at all

  First of all, I had a problem with my cyan ink on my printer HP Photosmart B210 series. The problem was that he was not the impression and he says it wasn't printing because of the cartridge and also I had to align my cartridges. Whenever I tried to align the cartridges he says that alignment does not so I ended up trying to align them so much that I have exhausted all my ink and went out to buy all new cartridges.

  When I installed new cartridges and tried to line up once again, they all worked perfectly, but when I went to print a photo, the magenta was not yet appear. I did another test called 'Print diagnostic Information' and the magenta box is completely blank 100%. When I went to see the "estimated ink levels" he said it was perfectly fine. I tried to print a picture of a square while magenta box and the printed page was completely empty.

  Basically... How can I get my printer to recognize the new magenta cartridge because it is not currently.

  I'd say running up to three cycles of cleaning the printer before driver or Panel box tools.  If this doesn't get the magenta, then you can try soak the print head, as described here.

  [edit] Know that the ink gauge is probably not at this point clear - especially the printer like that it has printed pages of magenta at this stage, while the ink is still in the cartridge.  The ink gauge will indicate less ink cartridges is actaully available.

• Unable to print black and white with no yellow ink L7590

  I ran more ink at the weekend and got a new black ink cartridge. Unfortunately, I did not notice that I was also out of yellow ink. I desperately need to print regular black text, but the printer refuses because he is more yellow ink! I don't want print Yellow. Is it possible to disable this error message for a HP OfficeJet Pro L7590?

  Thank you.

  Nevermind, I figured it. If you set the printer on the mode of manufacture, it ignores the ink levels. Sorted.

• HP Photosmart B210 using iPad or Windows 7 computer laptop not printing black

  My husband uses this machine almost every day. The other day, he got an indicator he was more black ink and after having changed the cartridge (which we all have two made more successfully during the past two years) black will still not print. He cleaned the printhead and unplugged the unit and plugged in. He tried three different, all cartridges HP, with two of them coming from different packages sold in different shops. (He suspects that a package of three cartridges was defective, after two of them did not work).

  All the tips under "buy a new unit on Black Friday?

  Can't get black print on Photosmart B210. Followed the instructions for the cartridge door of washing in VERY hot water and let soak for 5 minutes. I then cleaned cartridges twice and hey presto it worked perfectly. I was ready to ditch the printer. I would add that I am 83 years old but was able to follow the instructions of a useful post.

• Photosmart 3310 printing issue - apparently ink leaks and failures of alignment

  Hi, sorry to bother but I am facing a problem with an All - In - One Photosmart 3310.

  -I am running windows XP.

  -L' printer is connected to several for my private with band wifi LAN.

  N ' got no code error on the question

  -All used within the printer cartridges are genuine HP and photo paper was also 10 x 15 HP (the one provided with the packs of cartridges).

  -L' printer is a little over 4 years now and he has his crazy suddenly two days ago. The printer has not been moved or damaged, it simply sound suddenly started printing blue black & white text characters and ended with the ink.

  As I have already experienced similar problems with some other printers, I well as cleaning cartridges and lining up, but it has not changed anything. I finally changed all 6 white ink by new ones, but all the same. I cleaned again, tried to align, but once again, no possible way to achieve alignment. "Alignment failed" came out at this stage.

  Here are some pictures to illustrate because I tried several impressions to make sure it wasn't a short-term problem be resolved with cleaning or alignments: photo printer problem

  It should be noted that no two prints come out the same way, some are mainly blu, other yellow or green...

  At this point, I didn't Kow where to start with this problem. There seems to be a leak in the print head (assuming that the magenta) and another leak with the blue wire (it can not see on the pictures, located at the bottom of the left hand side, but could not get any pic suited because of the plastic on the printer cover.

  So, I'm wondering the following things:

  -What a sound suddenly went to the printer?

  -It worth repair?

  -How to proceed?

  Any ideas? Thanks in advance for reliable advice.

  Alignment is probably a failure because of the incorrect colors being printed on the page. The printer scans each line or section of the alignment page using a special sensor inside the printer and check all colors from ink and their bosses and investment. If one of them is not what the printer is expected to be, the alignment will fail. I don't know what film you're referring. But I don't think it matters, as the cause of the failure of the alignment is quite obvious.

  I don't think it's possible for you to do something to solve this problem. Take it to a service center would be a better option, cos they have the tools and the expertise and training to do such things.

  The upgrade process differs from one country to another. I'm not sure of European countries, but in the United States, you can call the support technology and upgrade to a new printer with similar features as yours. HP has TS lines for printers, which is very different from Smart Friend. You must pay any fees to call them and talk to them. If you are in the United States, call 1-800-474-6836 and choose Photosmart all-in-One printer as your product to be transferred to the printer Dept

• HP OfficeJet Pro 8000 Wireless: Can I get some help here? Yellow ink will not print - HP OfficeJet Pro 8000 Wireless

  No matter what I do, ink yellow does not print, or stops at halfway printing on the page. I use genuine HP cartridges. There is a lot of ink - in fact, I just installed a new cartridge in the case where a previous (almost complete) was defective. No change. The pipe is not pinched. I flashed the firmware more recent and installed all drivers and utilities updated. I have cleaned the print heads over and over again and even took and cleaned according to the instructions.

  I think it was a sign that the printer is worn EXCEPT - just a few months ago, magenta and black stopped printing. These are the opposite printheads. When I uninstalled every bit of HP software I could find, the printer back to normal!

  The only thing I did not - it is the HP Toolbox argues that it is impossible to establish two-way communication with the printer. The patches for this involve get under the desk to play with the power cord and USB cable (even if it is a wireless printer), and my arthritic knees that make a very delicate operation. Two-way communication IS enabled.

  I'm about to start crying. I fought with this market a week, when the yellow all of a sudden went - once again, * most * of the time, but sometimes it prints to maybe an inch of the image before disappearing. Help!

  Hi @Echo2,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet Pro 8000 printer with a Windows 7 computer and all of a sudden is not printing yellow ink. I would like to help with that.

  Here is a document of support for the print quality problems - Troubleshooting print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• Photosmart B210: Drivers not available

  Tried to download the drivers for my scanner/copier Photosmart B210 today but the site says: "error 404: there is no content available."

  Same result with the method 'detect my product. "

  How can I get my hands on the drivers please?

  Hi Paul,
  
  Thanks for the link but I downloaded it from http://www.siliconguide.com/drivers/device/1792/.
  
  I needed a solution and HP let me down with the drivers not being available from a trusted souce, but thanks for taking the time to reply. Much appreciated.
  
  WitchNet
  

• HP Photosmart B210 more: HP Photosmart Plus B210 will not copy

  My HP B210 won't do a direct copy. I can scan to a file and print it from there, but I can't make a black or a color copy. I tried pressing "copy" and then pressing "settings" to restore the default settings, but that didn't help.

  Any help will be appreciated.

  Hi @onslo

  What happens when you try to perform a direct copy? The scan function uses the same hardware components such as copy, so theoretically speaking, if you can scan, you should be able to copy. Maybe the problem is with the ink system, please try to print a quality report and let me know what happens.

  1. Load plain white paper in the input tray.

• HP Envy 5530: Yellow ink not print

  Yellow Ink stopped printing with the Tricolor cartridge; replaced by the new HP cartridge and not yet. Also tricolour ink not detected.

  Tried all the steps HP support, including the persistent page terminals on the cartridge and to the holder. Also reinstalled driver. No change.

  Is this a hardware problem? The printer is only 6 months old and so under warranty, but I buy an Epson if it is!

  All ideas welcome

  Thank you

  6 months and under warranty. Call HP for replacement.