Photosmart B210e stay connected to the PC (wireless)

Similar Questions

• Cannot stay connected to the network, even after replacing my old router.

  I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.

  Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.

  Hello

  You can check this link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• IMac stay connected to the printer

  I bought a HP Photosmart C310 Wi - Fi.  I got it all working with a small defect.  The IMac will print to him once and then the next time show printer as "offline".  The two PC see it very well all the time.  If I turn printer off and on again, Imac prints anything in Quebec, then reads ready until you want to print again.  He then tries to locate the printer and then comes with offline.  IMac reads and remains connected to the router wireless internet access.  Also, I am new to the Mac world, am looking for solutions.  Someone told me it?

  I did the reset.

  I found my problem.  I guess I thought that given that the computer had located the printer she had 'found' all the right settings.  In a way trail and error, I found that I had to change the Protocol when adding the printer.  I had not noticed the drop-down date menu button (go figure).  Changed to "HP Jetdirect - socket.  Default value is 'Line Printer Daemon - LPD'.

  Thank you for your time and your suggestions.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• I can't connect to the Internet wirelessly

  I just replaced my wireless device and now I can't connect to the Internet wirelessly

  Hi JimMahoney,

  You have installed the necessary drivers for your new wireless device?

  You receive an error message when you try to connect to the internet using your router?

  What virus protection software is installed on your computer?

  I suggest you try the steps mentioned below.

  Method 1: Run the network troubleshooter utility in Windows 7.

  Please follow the steps below mentioned link to run the network troubleshooter utility

  http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

  Method 2: You can also check the configuration of your new wireless device.

  Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

  I hope this helps.

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• Computer connects to the network wireless as "local only".

  I am running Vista Home Premium SP2 on a HP Pavilion laptop.  I've never had any problems to connect this machine to a wireless network before, in hotels, at home, or anywhere.  My current home network is a modem - cable-> wireless-> wireless netgear n300 router.  My laptop connects to the internet via the modem cable directly or a wire from the netgear router.  I have a second, almost cell identical (it's intel, while the one who does not is AMD) which connects to the network wireless without any problem.  Two iphones connected wirelessely without any problem.  My HP laptop is the only one who refuses to connect to the internet.  Connected to the wireless network, it has access "local only".

  I tried the solution in this article: http://support.microsoft.com/kb/928233

  The question does not seem to receive an ip address, the computer receives an ip address.  I have disabled the IP v6, ran the norton removal tool, because I only had to a point and tried all other suggestions in these discussions: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/0949042d-074e-43ab-ba95-3c06cc2aa6be and http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/bc08f0e7-49a9-4458-9e0e-149b2df362ec.  I've uninstalled and reinstalled the adapter and all TCP/IP and network protocols associated with it.  I am at a loss and would welcome any ideas.

  Here is the result of the command ipconfig / all:

  Windows IP configuration

  Name of the host...: Arrakis

  Primary Dns suffix...:

  Node... type: broadcast

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-1E-4C-B2-32-BC

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.5 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Wednesday, 28 April 2010 21:40:55

  End of the lease...: Thursday, April 29, 2010 21:40:55

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: NVIDIA nForce Networking Controller

  Physical address.... : 00-1B-24-FA-DA-80

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 10:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {31C080CE-FE0B-4D50-B734-C782C9A25FBC}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: isatap. {B198B0D3-B70A-4E3E-858D-9774C414EECD}

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 02-00-54-55-4E-01

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card 6TO4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  If anyone has this problem, it has been resolved by rolling the security settings on the router WEP.  I got the answer from the support client netgear.

  Amazing how two iphones, another laptop with XP and a laptop running Ubuntu Linux all about them without any problem, but wouldn't connect Vista laptop.

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Connecting to the wrong wireless network.

  Nope.  Tried to make this process a few times just to make sure that I was just doing and still it connects to the wrong network.  Something else I could try?

  I'm in the boat the same, did you ever get a resolution on this?

  Separated from the<>https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connecting-to-the-wrong-wireless-network/633fcfd6-7bdd-4369-b66f-94611c5df76e >

  Here are some solutions to try if you can't connect to Wi - Fi. Follow the below mentioned steps to solve the problem:
  1 remove the network and let Windows re - find. Then enter the password again.
  http://Windows.Microsoft.com/en-in/Windows-8/get-online-tutorial
  2. change the TCP/IP settings, if the IP address is set to manual
  http://Windows.Microsoft.com/en-in/Windows/change-TCP-IP-settings#1TC=Windows-7
  3. If none of the above steps work, follow the link to solve the problem below:
  http://Windows.Microsoft.com/en-in/Windows/cant-connect-to-network#1TC=Windows-8

• Problem to stay connected to the internet through the wireless router.

  I'm having a strange problem.  My computer will stay connected wireless for anywhere between 2-30 minutes before losing connectivity.  However, it works when I plug it into the router, which is what I'm doing now.  I have tried everything I can think of to eliminate the problem, but it has not changed.  Usually, once it shuts down it will stay off until I have change the frequency of router or something.  Reset the router works every time some time, but nothing is definitely the problem.

  I disabled ipv6, reset the router, update windows, restarted several times that I have unplugged router and modem, reconfigured frequency channel of the router, among other things.

  It must be a problem with my computer because my roommate both have computers that are working properly.  In addition, it is a relatively new problem.  I've had my computer for a few months now and it has worked well up until that 2 days ago.

  Any help would be greatly appreciated.

  Thank you

  Hello

  I would try the underside and then if no joy try a system restore to before this happened - don't worry
  the system restore without the bottom as the issue will probably come back. And if you always do
  a system restore and then repeat the underside when even because all will be back to old drivers and settings.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  --------------------------------------------------------------------------

  Please do this 1 and repeat if you need to do a system restore:
  
  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Atheros 5007 won't stay connected to the Netgear WNR3500 router internal wireless

  I just bought a new laptop Compaq CQ60-420us (nw156ua) a week ago. Machine comes with Vista Home Premium and I installed Win7 rc1 64 on another partition.

  Initially I could not it remains connected to my router for more than 15 minutes approximately. I just press the wireless button to turn it off and turn it back on. Who would fix it for about 15 minutes.

  I called HP support, they tried many things including for me to do a factory restore.  They finally decide to send me a new wireless card. I received the new card yesterday, had it installed and it is essential to do the same thing. Last night, I dug an older linksys wireless router that I have used in the past. Hooked upward and the laptop stays connected to her very well. I had the wpa security enabled on the linksys routers both netgear.

  Then, I went to the netgear router and disabled security. It is very well connected. Not sure if wep security will allow him to work. I refuse to use just the wep security. It is easily hackable. And of course I will not let it be secure.

  So it seems to be a compatibility issue between my router netgear wrn3500 and the atheros 5007 wireless card security. The router has the latest version of the installed software package.

  I guess I'll call HP tonight and see if they can send me a different brand/model wireless card. All my other wireless devices work fine with this netgear router. I don't want to get rid of the cause of netgear, this is a gigabit & Wireless N router.

  Does anyone know of any other mini pci express card that works with my laptop? I would get a card N. I thought maybe the intel wifi link 5100 card. Not sure if those who are compatible with HP or not.

  Thank you!

  When I called HP back support, they were completely useless. Everything I tried to ask them is if they could just give me a list of wireless pci-express cards that would be compatible with my laptop. They did not understand my problem and could not give me a list. I wanted to the list because I read several times that HP has a 'white list' cards that will work with their motherboards. If you put a card that isn't on the list you will receive a message to remove the card from the bios when you turn on the machine. I checked this by testing the intel 5100 card on my laptop and it gave me this message.

  Oh btw, it's MUCH safer these days to update the bios of your computer, it was many years ago. I do all the time and have never had a 'brick' on me. Even safer on a laptop with a battery in good condition. In fact I recommend it as part of your troubleshooting process. That will not fix the problem tho atheros wireless.

  However, in the end, I was able to operate pretty well no thanks to HP!

  I had to buy another card Atheros tho. It was the 5009 Atheros. And it's a card N I so was able to get with my router N 300mbs speed!

  I found it on ebay for about $25 plus delivery charges. Oh and these cards are VERY easy to replace. There is a door on the bottom of the laptop with a captive screw - remove the door, then another screw which holds the card down. 2 drivers who commit on the 2 connectors on the map - the map out on the right.

  This card worked very well for me I highly recommend to solve the problem with shit card atheros 5007.

  Unfortunately, my laptop was stolen 2 weeks ago! (it was only 2 months old!) Some loser scumbag broke in with me so that I was at work and stole my laptop and my LCD 24 ''!

  I've had this laptop for $350 new Staples. I can't find a similar agreement now.

  Don't know if I'll go with HP\Compaq after what I went through just to make it work wireless...

• Photosmart 7510 will connect is the network (mac) wireless

  Although already our Photosmart 7510 used to connect wirelessly to the network, it arrested recently, without a known cause. I've updated all the software. It is said on the printer that is connected to the network and print via usb cable but the computer says that it is not connected (or on any other laptops 3 mac at the office also connected to the network).

  As I said, I've tried updating all software and have tried to delete the printer via reset printing system by following the instructions on a previous post. However I now can't add the printer as was then ordered.

  The software used is

  Mac OS X Lion 10.7.5

  Any help would be great, printing via USB is such a pain!

  Thank you

  Hello

  Try unplugging your router to power for 30 seconds, plug it back in and look for any change.

  Also, try power cycling the printer.

  If it persists, reset the network settings and reconnect it to your network, you can find steps planned in steps 3 and 4 below:

  http://support.HP.com/us-en/document/c02948582

  So, you can try to reset the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Try to add the printer by clicking on the sign more and check any change.

  If none of the steps above does not help, have you changed anything lately? a new router, etc.

• All-in-one HP Photosmart Premium C309g-m requires the password wireless

  All-in-one HP Photosmart Premium C309g-m we recently had to ge to a new Westell router for the wireless. the printer connects when we put the password but anytime the commection to the router go out it will not reconnect until the password is released. He seems to forget the password.  System indicates that the software is up to date for the printer.

  Hi ckmcgraw,

  Welcome to the Forums of HP Support! I see that you have recently changed your wireless router and now when he loses the connection, you must enter the password on your HP Photosmart C309g to reconnect to the wireless network. The reason why this could happen, it's every time, it loses the connection to the router assigns a new IP address, which would require a password for the network.

  You can set a static IP address for the printer, which should solve your password entry wireless every time, he loses the connection. See the steps below:

  • Print a network from the front of the printer Configuration Page. Note the IP address of the printer.
  • Type this IP address into a browser to reveal the internal settings of the printer.
  • Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  • On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  • Use 255.255.255.0 for the subnet (unless you know it's different, if so, use it)
  • Enter the IP Address of your router (on the Page of the Network Config) for the gateway.
  • Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  • Click 'apply '.

  Please let me know the result, I hope this helps!

  Thank you

• Inspiron E1505 having to stay connected via the wireles lan

  As of the end of the wireless lan or the wireless internet to my laptop works intermittently or not at all. I am running Windows XP Home edition Media. The laptop used to connect to my router wirelessly with no problems and stay connected. I did all the evil that shooting the self-help site Dell says to do. I can see my wireless router and that you have entered the WEP key. I downloaded the updated for the wireless card drivers. I have another laptop in Vista that will connect to the same router without problem so I'm pretty sure is not the router. When the connection is de-energized, I go to the network connections page and see that the wireless network connection has a red X through it. After that some playing around, I have may come back, the red X goes.  When I right click the wireless internet to wireless networks available veiw upward opens a screen that says "Windows cannot configure the wireless connection. Any suggestions?