Atheros 5007 won't stay connected to the Netgear WNR3500 router internal wireless

Similar Questions

• HP laptop could not connect to the netgear N600 router secure

  New laptop HP MAY connect to the Netgear N600 dual band router if NO guarantee is enabled, but it cannot if security is enabled on that either WPA, WPA2, WPA2-PSK regardless.  It can connect too well if wired (of course).

  I reloaded the drivers and all the usual remedies but not joy.  Also I tried using a USB WiFi adapter with the same result, unable to connect with security enabled.  All other devices connect very well including 2 Iphones, Tablet android, Apple TV, Apple MacBook pro, printer, etc. then it does seem like a router problem.

  Laptop is slightly, around the age of 6 months running Windows 8.  As a temporary workaround I disabled DHCP, security and peripheral isolation enabled 2.4 ghz radio router static address then attributed to the laptop, not a lot of security, but that's all I have.  I moved all devices except a (2.4 ghz only) iphone on the active side of 5 ghz on a different SSID with WPA2.

  It seems that the OS has a problem with the hold of encryption in the stack, or maybe it's a hardware problem.  Whatever it is, it works very well with an open WiFi but died completely when any type of security at all turned on, same WEP.  I arrived at the end of my knowledge here and short of a relatively new machine of retirement or try a full reload of the OS (Win 7 X 64 use), I'm stuck.  It is the only system to win 8 I worked (OS nasty if it is).

  Any ideas or suggestions?

  I know it's late, but there are probably people searching on the net because of this problem just as if I were stupid. I got a new laptop Windows 8.1 and plugged into my router to set up. Worked without problem. I unplugged the ethernet cable and jumped on the wireless, typed in my network key and hop, connected with no internet access or other useful functions. Long story short, eventually work was by using the automatic connection on the router (the one at the bottom that looks like a radio with 2 waves coming out of it) to connect the first time instead of manually typing the password.

  You will need to clear your computer auto-enregistré on the network so that you leave cool to do that. At least, I assume that. My laptop has a dual band wireless card, so I just shot on 5G and serves as my network "expenses. After he successfully connected to that one however, my laptop is now having no problem with the 2.4 G which was faulty in the first place.

  Who knows why he can be configured automatically, but don't let you not type the password yourself. In any case, I hope this helps someone!

• Unable to connect to the netgear to my computer wireless router dell laptop.

  I use to be able to connect wireless, but now I can't, we have a computer hp laptop, and it always connects ok and shows the other networks is available, I went through all the steps to get out of boredom and the computer tells me to serch for updates the problem can any one help? I use a computer dell laptop with vista bought as a package of pc world

  r Ellis,
  Thank you for visiting the Microsoft Answers community forum.

  If cela used to work, but the fact now, you can try to do a system restore back before the problem started.
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  What happens when you try to connect - the computer see the router but not connect or not he sees the router at all?  Your wireless card still appears upward and it shows the available networks?  Depending on the answers to these questions, it could be a number of different things, so we have to know what that is and can't.  It could be that anything the wireles adapter has stopped working, the need of drivers update, interference, etc..  Let us know if the adapter is working or not and he sees to all networks or not, and we'll go from there.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Cannot stay connected to the network, even after replacing my old router.

  I have a laptop Toshiba Satellite L655 is one year old and its operating system is Windows 7 home Premium I have Comcast internet service and use a NetGear wireless router.

  Recently, about 2 months ago I got this router in Comcast, in replacement of my old 1. Why I asked that a new router was the former 1 had problems to stay connected to the internet. The problem persisted even with the new router so I look at it is not not a problem with Comcast or the router. I tried resetting the connection, the son, restart the router, diagnostics running on my laptop and are not yet able to resolve the problem. I run disc optimization, defragment the hard drive, run many virus / spyware scans and tried to disable startup programs as much as possible. This problem has frustrated me for months and I want to get it resolved. It sucks paying all that money for equipment and service and there not work directly without having to spend more money, which I have unfortunately not yet. Any help is very appreciated.

  Hello

  You can check this link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• Vista PC is offline, unable to connect to the Internet by LAN or wireless.

  Original title: Vista (Japanese OS)

  My Vista pc is offline (unable to connect to the internet), how install and run the Fixit tool?

  I have read that the English, however, my pc is in Japanese. I can't connect to the Internet by LAN or wireless.
  How can I get the Fixit tool to work on the said pc?
  Help, please!

  Hello

  1. what Fixit tool you try to run?

  2. what exactly happens when you try to connect to the Internet? You receive messages or error codes?

  You can read the following article and check if it helps:

  Windows wireless and wired network connection problems

  You can also read the following article to change the display language:

  Change the display language

  You can use another computer to download the Fix from Microsoft, then use portable storage such as a USB drive, CD, DVD, etc., to carry the Microsoft fix it on your computer.

• I would like to print from laptop to the printer at home. Printer is connected to the NetGear router ethernet

  HP PAvilion dv1000, Windows XP

  I would like to print from laptop to the printer at home.  The printer is connected to the NetGear router ethernet.

  I was able to print wireless from laptop to HP Officejet 7310 all-in-one, but now all I get is document to print message' failure '. "  I can get documents to print on the printer using my smart phone, but not the laptop.

  I used the "find printer" button on the print screen and can see the printer to select.

  Any suggestions?

  Figured it out after watching a few other posts...

  Configured the printer port IP address and now it is printing perfectly.

  Thank you to have messages out there for review.

  

• Use the connection to the server externally and internally for PCoIP?

  Another great video, very well explained. Just a question, it is not possible to use a connection to the server for both internal and external users PCoIP? You must use servers to separate connection, one at gateway PCoIP to external users and other to PCoIP direct links?

  You could, but internal users would cross the bridge PCOIP.   I' always found lve easier just have a broker for external users.

• Why don't I stay connected to the journal online (Huffington Post)

  When I connect to the Huffington Post, a newspaper online via browser Google Chrome, I stay connected for hours, until I leave the site. When you use Firefox my default browser, I be online only until I click on a story and then I noticed that I am not connected anymore.

  I tried to disable the Add-ons, safe boot mode, but it does not help. It didn't happen in another site, but because I've only visited the site for the first time recently, I can say that I did not any changes to firefox just before or after.

  I have the ability to use Google Chrome, but I don't like not really her - thats why FF is the default browser. I have also post comments on Forums and newspaper stories and find Lazare very useful if I am stopped when writing a piece. Now, Lazarus works brilliantly in Firefox but doesn't seem to work in GC. Yet another reason to fix this "stay connected".

  Excellent work on tracking down the missing link!

  Third-party cookies are all cookies by servers other than the one listed in the address bar. They are needed on some sites, you found, but are also the means by which track you advertising servers.

  In my opinion, a good balance is to allow all cookies, but expires them at the end of the current session by changing your story custom options to:

  Keep until: "closing of Firefox.

  So if there are sites that you do NOT want to be disconnected of the sessions, add those as exceptions, either by using the Exceptions on this same tab, or about: permissions (note the colon between subject and permissions), or the Page Info (Tools menu or right click) dialog box.

• After the installation of Windows XP Edition family, it won't connect to the internet via Ethernet or wireless. I am also unable to activate Windows.

  just installed windows xp home edition on my laptop but it does not connect to the internet (both with a cable and wireless) and it also won't let me activate windows (cant conect to the Server Setup)

  original title: windows xp is a pain

  What is the manufacturer and model of your laptop?

  Visit their web page (the manufacturer) and find their drivers and help section and get the drivers for your model laptop for Windows XP 32-bit.

  You, of course, this done from another machine and using some external media to get it back to the laptop.  You can get * just * wired or wireless network drivers if you wish - you can then use the Internet on the laptop again to get the rest.

• Problem to stay connected to the internet through the wireless router.

  I'm having a strange problem.  My computer will stay connected wireless for anywhere between 2-30 minutes before losing connectivity.  However, it works when I plug it into the router, which is what I'm doing now.  I have tried everything I can think of to eliminate the problem, but it has not changed.  Usually, once it shuts down it will stay off until I have change the frequency of router or something.  Reset the router works every time some time, but nothing is definitely the problem.

  I disabled ipv6, reset the router, update windows, restarted several times that I have unplugged router and modem, reconfigured frequency channel of the router, among other things.

  It must be a problem with my computer because my roommate both have computers that are working properly.  In addition, it is a relatively new problem.  I've had my computer for a few months now and it has worked well up until that 2 days ago.

  Any help would be greatly appreciated.

  Thank you

  Hello

  I would try the underside and then if no joy try a system restore to before this happened - don't worry
  the system restore without the bottom as the issue will probably come back. And if you always do
  a system restore and then repeat the underside when even because all will be back to old drivers and settings.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  --------------------------------------------------------------------------

  Please do this 1 and repeat if you need to do a system restore:
  
  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Photosmart B210e stay connected to the PC (wireless)

  Hello

  I'll give you my specs first:

  HP Windows 7 64 bit hard PC connected to the security of WPA-PSK/w N + Router Belkin Wireless.  The printer is connected to the network wireless about 15 feet from the router.

  I have problems with my Photosmart B210e stay connected to my computer.  The only way I can get my computer to see my printer is to restart the printer.  After the printer starts I can print from my computer for about 10 minutes.  After that the computer can no longer maintain a connection with the printer.  According to the screen on the printer, I'm always connected to the network, but when I try to print I always get an error to the effect of the computer cannot establish a connection with the printer.  I have to restart the printer if I want to print again.  I don't have another computer to install the printer, but I can send an e-mail to my printer from my phone which will print when my computer does not see my printer.

  I had the printer for a little over a year and it has always done.  I don't post things very often, but I still don't think it is necessary to be able to the printer whenever I want to print cycle.

  According to the Product Support page there is an update for my printer.  When I try to update the printer from the screen, he says: my printer is up to date.  I tried to update several times and it has NEVER been an option to update, so unless that updates are automatically applied I'm not sure why my printer cannot find the update.  On the product page there are also drivers of the 11/2010.  I bought my printer from Best Buy in 01/2011 so I don't know if I have the latest drivers.  However when I try to download and install the installation always fails me give no description as to why it failed.  He told me then it downloads a solution to the problem and installs an icon on my desktop.  As soon as I click on this icon, it says that it cannot be used because there is no internet connection, which is not true because I can open a browser and surfing very well.

  -J' tried to activate power saving mode that didn't work.

  -J' I attmepted to run the HP network diagnostic utility.  If I run it, as soon as I start the printer it works and shows that there are no errors, if I wait 10 minutes and try to run it does not find my printer.

  -J' I attmepted my printer of the assign a static IP address, I still have the same issues

  I'd appreciate any help that could be given, thanks for your time.

  Rob

  Routers Belkin have had some problems with HP printers.  Make sure your Belkin has the latest firmware.  Use the Belkin CD to do this.

• Windows Media Center won't stay connected to xbox 360

  I am running Windows 7 service pack 1. everything worked fine until about a week ago. No updates have been made, that I know, but the XBox 360 will not stay connected for more than 5 minutes. Everything else works fine. Netflix, Xbox Live, everything but Media Center. Help, please. He will play with stutters at all, then I get a 'Connection error', telling me to check the cable network and blah blah blah.  I did everything I can think of.

  Hi Brian,.

  Thanks for posting your question in the Microsoft Community Forums.

  Connection problems may occur even if you set up an Extender or after the Extender has been successfully configured. Here are some possible solutions to the Extender connection issues.

  An Extender can lose its connection to the computer for various reasons. Here are some reasons why this happens and some possible solutions to the problem:

  Please refer to the sections "why if my extender connects to my computer during or after the installation?" and "what happens if I lose the connection between my computer and my Extender?

  Windows Media Center Extender: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  You can also check this link:

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-FAQ

  It will be useful.

  Come back if you have any questions about this question or any problem with Windows in the future and we will be happy to help you.

• Impossible to stay connected to the computer

  original title: I'm on my computer at home and every time I turn on the computer, I have to sign in again.  Is it possible to get windows to remember information.  I always check the 'stay connected' nothing doesn't.

  I turn my computer every morning and has to connect.  Is it possible to get windows to remember my login information?  I check the box 'stay connected', but does not work.  My Google account very well remember my login when I tick the box "stay connected".

  Any help will be appreciated.

  There is no really no, do not forget your computers main login password,.

  Google is nothing other than an online application / Web site to the home page / search...

  Your computer login page is to secure your machine of someone else / if it'stolen anything on your machine is in the hands of thieves who, if you use paddings from form with banking sites... They got that you and yours,

  If I'm missing something here please check what your attempt of remembered.

  If this is really your main username,

  Click the Start button and click on your picture in the user on top.

  You will see a link at the top left,

  Delete your password / it's the only option.

  Enter your password for the last time check out the action, save.

  Good luck.