Photosmart C6280 all-in-one does not scan to pc Solution Center

Similar Questions

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• 7510 photosmart e-all-in-one does not print

  I had setting successful place Photosmart e-all-in-one printer 7510 when I bought first. Super easy to install and I print wireless all the time.

  I recently moved and tried to uninstall and reinstall the printer so that I could print wireless again. I did exactly the same thing to install because I did the first time and it doesn't work. I went through all the steps help and may not know what the problem is.

  1. the printer is turned on.

  2. the printer is certainly connected to the network. No problem found on the wireless network test.

  3. my computer is not connected to a virtual private network.

  4. the computer and the printer are on the same network. Name of the network on the wireless network test is the same name of network connected to my computer.

  5. There is no firewall does not block the detection of the printer.

  6. the wireless router is not in a bad state of operation. If it were, I would not be able to get online, right?

  7. I do not use the 'connect a new printer' resettlement.

  8. I don't know that I downloaded the appropriate software drivers.

  I don't know what else to check. The only thing that has changed is the router and the internet provider. I got the same laptop before I move. Everything works fine print/scan when connected via a USB port.

  You're not the only one having problems with the SBG6580.

  Your internet provider has other available modems?  (not motorola)

• HP Photosmart C6180 all-in-one will not scan mulltiple pages

  My C6180 will not scan more than one page from the charger. After it scans a page will scan others by using 'add page '. I would analyze all the pages since the charger without manually add pages. I'm used to be able to do. Help, please.  Thank you.

  Have you contacted HP Support for your printer/scanner?

  http://support.HP.com/us-en/product/HP-Photosmart-C6100-all-in-one-printer-series/1153695/model/1153698

• HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

  I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

  After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

  What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

  Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

  A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

  In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

• HP Photosmart C3180 all-in-One does not scroll on glossy photo paper

  Printer all-in-one HP C 3180 will not take paper glossy photo Copier. I hear the gears rolling, but it doesn't pull in the worksheet. It will take regular paper and Matt paper thick. I use only HP advanced photo copy paper. Are there adjustments for scrolling? Any help would be appreciated.

  I was able to identify the problem and solve it somewhat. Settings of the printers were very good; no paper jam, etc.  It is the rear access door.

  Glossy paper would not scroll until I pushed on the RAD. I just have to hold it down until the paper begins to scroll, so I withdraw my hand. Find out where the problem is I should be able to jimmy-rig it (ahh... Yes, duct tape!) to hold in the FDR. Nevertheless, Cheetah12, I appreciate your suggestions.

  alpha2566

• HP Photosmart C7180 all in one: does not connect

  Help!

  My C7180 All In One Wireless printer won't connect, I trouble shoot error code: 0x803C010B rises.

  This printer is 9 years old.

  Its been having problems printing as point by point when I copy it scans then prints point by point. However, when I printed a downloaded doc it would be normal printing. But now it won't connect to my laptop or my desktop Dell all-in-one wireless.

  Any help is appreciated.

  Hello

  Thanks for the comments.

  Glad to hear it works now.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• My Photosmart C3180 all-in-one will not scan.

  Get Installation error 8, [(8,0,0)], then press the 'OK' button to continue. Complete installation - printer OK, but not scan.

  Have tried all the options within the "error of Installation of the HP" without success. "HP solutions Center - 'guide' gives no action.

  Seems to be all 8 sections OK and going to "finish the screen. Connect the printer and "install device driver" is displayed. Close this at the end of "the device is ready for use. The "software Setup screen appears again and then comes to an end, when the ' screen HP Solutions is started." I tried to scan from there, but still get the error "8,0,0" described above. As I said, the HP Solution Center - Guide (for a solution) either do nothing, Windows Control Panel product "program stopped working." Printer/scanner worked with this Win7 for almost a year, before getting this problem. There was also the C3180 in recent years through Win XP & Win Vista.

  Not sure if the problem is hardware, A) B) Windows, software HP C) or (D) the file downloaded "AIO_CDA_NonNet_Full_Win_ WWW_130_140".

  We'll see. It could be all three issues you have described. However, let's test a few things. First first, let's do a copy on the printer itself, see if she did this and that will prove its functional. Other hardware issues maybe a defective USB cable. Then you can consider replacing that.

  Then for the software, I want uninstall you devices and printers, programs and features, Device Manager. Then in the menu Start menu type "%temp%" and press ENTER. Delete all the files. Some will not delete, and it's good.

  Then download the files on the site.

  Make sure that the USB cable is disconnected through this process.

  When you reinstall message out there and let me know the result.

• HP photosmart c6180 all-in-one: does not print because some cartridges are empty

  I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

  Hello

  To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

  Kind regards.

• Deskjet F340 all-in-one printer cannot scan from the solution Center

  We had a very short temporary blackout in mid-August. Who put my turn out of service until I could afford a new

  power cord. I received the new cord and my PC works fine now. I had to replace my modem because it is finally just

  stop working. My printer doesn't not have be reinstalled because I lost some functions when we had the black out.

  Now I can only print and copy from the Solution Center. There is no indication in the scanning settings. I can scan if I go to

  Scanners and cameras and use Scanner and camera wizard. But it can be a pain. I also can't any alignment

  messages after I replaced a printer cartridge. I get the alignment page but no message. It does not seem to line up OK. My

  OS is WIN XP Home Ed with SP2. It's on a Everex IMPACT GA3400 PC. My printer uses a USB connection. I think that

  some of the files I need for scanning to go from the Center of solutions some how have been removed. But I don't know which ones or

  even how to get back them. Any help would be greatly appreciated.

  Pleae insert the printer installation CD and contant go through it:

  Locate Setup\SolutionCenter\SolutionCenter.msi, right click on the file and click on repair.

  Confirm an alert during the installation.

  Search now Setup\Scan\Scan.msi, right-click, and then click on repair... to confirm an alert as before.

  Restart your PC and launch the HP Solution Center now.

  You don't see any change?

• HP Pavilion p6780uk: my hp Photosmart C4180 all-in-one will not scan after update to Windows 10

  Not sure if Windows (32-bit or 64-bit) 10

  Welcome to the community of HP, @DavidJ70

  I came across your post about how you are unable to analyze after upgrade to Windows 10 and wanted to answer with my suggestions.

  First run Installation Wizard printer here: use of diagnosis HP for printers HP Windows tools

  After that, the feature complete driver and software must be installed for your printer on your computer. Try to scan the image. If there are problems, let me know all the details, errors, etc., and I'll do my best to help!

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Best wishes

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• TWAIN plug-ins for the hp Photosmart C6280 all-in-One for Photoshop to Macintosh

  Where can I download the Photoshop (CS4) for Macintosh plugin twain for hp Photosmart C6280 all-in-One, so I can scan from Photoshop?

  The HP software only provid ICA interface support (purchase of Apple's Image Capture) which is the native OS X interface.

  TWAIN interface is no longer available for OS X, which means that you will not be able to scan from Photoshop from Adobe directly because it doesn't support the TWAIN module.

  You have to parse through Capture of Image, then you can open the files analyzed on Photoshop.

  Shlomi

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Photosmart 6280 all-in-one: HP Photosmart C6280 all-in-One error - wstub 197370' «Fatal error during Installation»

  Hello

  I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?

  I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:

  "Error - wstub 197370'

  "Fatal error during Installation"

  And then starts to uninstall the entire software package and then request to restart to uninstall complete.

  Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!

  All advice is appreciated.

  Best regards, K

  Hi @k_san7,

  Welcome to the HP Support forum.

  I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.

  I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).

  I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.

  Then I would erase the temp directory.

  1. tap folder in the field "search programs and files".

  2 Select all the files in this folder, and then press the delete key to remove.

  Once removed to close all windows and restart the computer.

  When the computer restarts, download and install the latest version of the software and the printer drivers.

  Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!