Photosmart c6280 printer

Similar Questions

• HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

  Our HP Photosmart C6280 has always produced excellent results, but all of a sudden it won't print Magenta or Light Magenta, although they show of 75%.  We even tried to put in new ink cartridges, but they still does not print.

  Hello

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart C6280 - Product Support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Photosmart C6280<- set="" to="" your="" version="" of="" windows="" for="" the="" proper="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  These might help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP photosmart C6280 printer

  I had problems with my printer. Before I uninstalled the drivers. I was getting a pop up whenever the solution center came. He continued to ask me some HPAssistant.msi. I have to keep clicking on cancel until he went. Recently my printer was not recognized by my computer...

  So, I read somewhere on the forums to uninstall drivers and reinstall them and who's going to fix that. Well my problem now is that every time I have try and download the drivers on any computer, it of not down load but it gives me a cannot connect screen - I click Retry and it continues.

  What I have to do!

  Please help me, thank you

  Hello tmprather,

  If this happens when you try to download the file from the HP website, that might help:

  When you try to download the full software functionality for the Photosmart C6280 for Windows XP or Vista, this is the link that opens when you click the download button:

  FTP://ftp.HP.com/pub/softlib/software10/COL19845/MP-52268-5/100_228_PS_AIO_02_Full_Net_enu_NB.exe

  Change the first "ftp" to "http" in the address field so that the link looks like this:

  http://ftp.HP.com/pub/softlib/software10/COL19845/MP-52268-5/100_228_PS_AIO_02_Full_Net_enu_NB.exe

  Press enter and you should be able to download the file. When it's done downloading, simply double-click on the file and the installation should begin.

• Driver of HP Photosmart C6280 printer problem

  Hello!

  I bought the above mentioned model printer, and I installed the drivers in the manner recommended by the manual. The printer works well and does what I expect from him. But there is one thing that annoys me.

  The printer is connected to my home network

  Drivers are installed on all (two) computers in my house.

  On my old trusty laptop running Windows XP Pro, it works very well, but when I connect it to a network in other places, a svchost.exe process starts to run at 100% and to use all free CPU resources in my computer. This svchost running a process called HPSLPSVC. If I reconnect the computer on my home network, it comes down to normal loads of CPU again.

  Is it possible to 'reverse', the printing software to say when I'm not at home? This situation of CPU load makes the computer run the much more common fan, which is annoying in addition to one.

  I hope to have this work, or I'll be forced to install a queue shared on my home server.

  / Noralf

  We have a work around for now, he must first install both files to patch the operating system from the following link: = http://support.microsoft.com/kb/927891 = here's the instructions on what to install the web link above: after opening the link, you need to install 2 patches. The patches to install are given below. "Download and install update 927891" & "download and install Windows Update Agent (WUA) 3.0" after you have installed the two patches, you must restart the computer and check the result. If the problem persists, we can perform the steps below. II. "HP Network Device Support" service stopped: the steps to stop the "HP Network Device Support" service are: 1. click on start, then run and in the run window, type services.msc and press ENTER. 2. Locate the service "HP Network Device Support" in the opened window of Services 3. Right-click on it and select "Stop" and close the Services dialog box. III. Add HPSLPSVC32. DLL file in the firewall exceptions list: Add 'HPSLPSVC32. DLL file"in the list of exceptions in the firewall, perform the procedure below. 1. click on start-> run. 2. in the Run dialog box, type "firewall.cpl" and press OK. 3. Firewall dialog box Windows will open. Select 'ACTIVE' option. And then click OK. 4. yet once, perform the steps above to open "Windows Firewall" dialog box. Then select the tab 'Exceptions' 5. Click on "Add program"-> "Browse". 6. Select ' "C:\Program Imaging\bin\HPSLPSVC32 HP.". " DLL' after the completion of the steps, click on apply and OK. And restart the computer to save the changes. Once you restart the verification of the system for the result and we do know the result so that we can help others also facing this problem.

• I've recently updated to Mac OS x 10.6.8. Now, my HP Photosmart C6280 print only on one side.

  I did a duplex for years, and it's actually one of the features of the printer that I use most often.  It's very upsetting to access this feature disappear.

  I went to < system="" preferences="" print="" options&supplies="" driver=""> > and titled "HP" accessory of double-sided (duplexer) printing is checked.

  I unchecked it and closed, then reopened and checked system preferences box of printing double-sided again.  No change.

  I have restarted the computer - no change.

  Simply the "duplex printing" option does not appear in the print dialog box.

  My update of the Apple software is up-to-date.

  What should I do?

  I found another post on this forum, on scanning not working not not under Snow Leopard ("MacBook Pro Snow Leopard OS HP C4280 not sweeping").  There was a response from a staff member of HP who introduced me to the "washer".  I've "cleaned" all HP applications, then re-installed Apple (not HP) and - to my great relief - duplex printing control finally appeared in the print dialog box.  I have now printed both sides successfully, and the case is resolved.

  I enclose a link to the forum where the useful answer:

  cleaning and re - install HP print and scan drivers

• Need driver for HP Photosmart C6280 all-in-One priner

  I was given a HP Photosmart C6280 printer, but the person do not have the disc that came with it to install the driver. I am reluctant technologically and have no idea what to do. Can someone please tell me where to find a driver for this printer and how to install it? I tried to use a driver on some other sites, but they want a credit card, and quite frankly, I don't trust them.

  Thank you!

  SWelch,

  I am more then happy to help you get the software for your printer. If you follow the link below, it will take you to your site of printers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3194498&task=&

  I hope this helps.

• PhotoSmart C6280: PhotoSmart C6280 Admin password

  How to reset the Admin password?

  Hi @H4nsen,

  Welcome to the Forums of HP Support!

  I see you're wondering how to reset the printer "Admin password". I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand you need to clear the password for admin off the HP PhotoSmart C6280 printer. To clarify, you are speaking for the EWS password or the password wireless?

  The semi full reset would clean the two passwords for the printer. I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Photosmart C6280: my HP Photosmart C6280 ceased printing and copying. I use a Mac OS 10.10.5

  My HP Photosmart C6280 stopped printing and copying. I use a Mac OS 10.10.5. The printer seems to work, but no ink is on paper with a function.

  I installed a new black ink cartridge and select "black only" with the same results. All the other ink levels are sufficient.

  I would appreciate your help. The printer has been idle for a few days but a previous usage has been a success.

  Welcome to the Forum from HP Support. I hope you're well @Suz161!

  Thank you access the Forums from HP Support for extra support! I see that you are having problems when copying / printing. I will do my best to help you with this problem.

  It looks like a problem with the printer ink. It may have dried due to non-use. I suggest that try you to perform a print head cleaning. Try the following steps:

  • On the printer control panel, press 'Setup '.
  • Press the down arrow button to select Tools and press OK.
  • Press the down arrow button to select "Clean printhead" and press OK.
  • If the print quality is acceptable, you can stop troubleshooting.
  • If the print quality is unacceptable, perform a print head cleaning.

  You can try the steps mentioned additional troubleshooting here: http://hp.care/2dVLZUu

  Let me know how it goes. Nice day!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Photosmart C6280: cannot print on C6280 wireless after the upgrade to Windows 10

  Cannot print on C6280 wireless after the upgrade to Windows 10. Have removed the device, but try to re install the printer when is not found. Can print if I connect USB. Tried to reload the driver using HP Support software help, but when he arrives at the end of the download fails.

  Hi @Ron9871,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your printer HP Photosmart C6280 wireless printing. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I would like to try the steps in this guide, "offline" Status Message printer (Windows 10).

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  • Print a Page of Network Configuration menu of the printer front panel. Note: the IPV4 IP.
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.

  Please restart the router, the printer and the computer in this sequence.

  If you're still having problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  You can try to change your WSD printer port by a Standard TCP/IP port.

  To do this, you will need your current IP address printers.  The Network Setup page shows the parameters of network for the product. To print this page; Press the button of network () on the control panel of the product.

   

• All-in-one printer, HP Photosmart C6280 range

  cabnot use black ink only or auto duplrx options

  Hello

  You should check with the help of HP, their documentation online, drivers, diagnostics and ask in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ========

  HP Photosmart C6280 all-in-One Printer - Support
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP Photosmart C6280 all-in-One Printer - drivers and software
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3194498&LC=en&cc=us&DLC=en&lang=en&cc=us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Manually uninstalling the program driver struggling for Photosmart C6280

  I had problems that motivated me to uninstall and reinstall my driver. Unfortunately, the uninstall program has been damaged and did nothing. I tried to reinstall it on top of the current program but the Installer did not provide this option when he saw that the program was. I tried HP Print and Scan doctor but he said everything was fine.
  
  I tried to uninstall manually. I removed startup entries, registry entries and most of the files in the directory of Hewlett-Packard. 4 files will not delete even if I thought I had all the startup items. It says: "cannot delete hpqddcmn: access denied." Make sure that the disk is not full or write protected and that the file is not currently in use. »
  
  My printer is a HP Photosmart C6280 all-in-One.
  I have Windows XP SP3
  The printer is connected by USB cable

  Ok no problem.

  If the C6280 software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup

• HP Photosmart C6280: problem scanning using HP Photosmart C6280

  All of a sudden my all in one HP printer displays "No. Scan Options" and the HP Solution Center cannot find any HP product installed on my PC, although I am still able to print.

  I found the help section relevant on the Web site which shows the topic "no option on HP Photosmart C6280 scan using Vista" but if clicked, no documents appear, the only question asked was useful document? !!

  Hello @CovBoy,

  Welcome to the Forums of HP Support! I understand you can't scan with your HP Photosmart C6280. When you try a scan of your computer that is running the Windows Vista operating system, you get an error message "no scan options".

  I see that you were able to find the document for solving the problems, but it does not open for you. Try clicking on the link below and follow the steps listed, the same steps apply:

  Message "No Scan Options"

  You are now able to scan or you still get an error message? Let me know I'll watch for your reply.

  Thank you for being a part of the community of HP. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Photosmart 6280 all-in-one: HP Photosmart C6280 all-in-One error - wstub 197370' «Fatal error during Installation»

  Hello

  I have a problem with my HP 6280 All in One Printer. There are a few problems and it's really annoying, I wonder if anyone can prove useful please?

  I uninstalled the software and drivers for the Photosmart series C6200 of the site, and when re installation, the software starts uninstalling itself and gives the following message:

  "Error - wstub 197370'

  "Fatal error during Installation"

  And then starts to uninstall the entire software package and then request to restart to uninstall complete.

  Once restarted, the whole scenario goes in a loop that is the uninstall process? Very confusing indeed and have never experienced this kind of problem before!

  All advice is appreciated.

  Best regards, K

  Hi @k_san7,

  Welcome to the HP Support forum.

  I understand that you found "error - wstub 197370' and"Fatal error during Installation"messages when you try to install the software and drivers for the HP Photosmart C6280 all-in-One printer on your Windows PC 7." I would like to help with that.

  I searched our database for "error - wstub 197370' and did not find anything related, but I found some documents related to"Fatal error during Installation"errors." Here is a document that can help - Displays A 'fatal error' during HP Software Installation (Windows).

  I'll try to uninstall the software and printer drivers. Click here if you need help with uninstalling.

  Then I would erase the temp directory.

  1. tap folder in the field "search programs and files".

  2 Select all the files in this folder, and then press the delete key to remove.

  Once removed to close all windows and restart the computer.

  When the computer restarts, download and install the latest version of the software and the printer drivers.

  Here's a direct link to the software and drivers for Windows 7 - HP Photosmart series C6200 full feature software and driversprinter.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• RT of Windows and no driver for HP Photosmart C6280

  I have a new Microsoft Surface with Windows 8 RT.  I have connected to my PC homegroup network and can 'see' my printer HP Photosmart C6280.  When I try to install the printer, it says I need a driver for the RT, but I don't see how to download a.  All attempts to do so at the HP website came empty.  Windows RT wants a .inf file.  Can someone point me in the right direction?  I tried the suggestions to download HP applications, but they do not seem to 'see' the printer on the homegroup.

  One option to try is to use the HP Photosmart PCL3 driver class driver that is the Inbox with Windows RT operating system.  When you add a driver, select HP for the manufacturer and scroll to the bottom of the list of printers, and there should be an entry for the HP Photosmart PCL3 driver class.  This pilot will allow printing features base for your device.