HP Photosmart C6280 prints not Magenta or Light Magenta even with new ink cartridges.

Similar Questions

• HP photosmart 5520 print do not correctly even with new ink

  I replaced the ink of color and black ink (364 cartridges). I have no error message or anything of what I see wrong. It is a wireless printer and when I print it always printed as ink cartridges are empty. Especially the black, when you're printing is a pinkish color. I took the cartridges and replace them in numerous amounts of times, and it seems to always print the same way. I don't know how to check the printer heads to see if it is causing the problem.

  Hello Daniellehenshaw,

  I'm sorry to hear that you are experiencing printing problems. I found the following troubleshooting steps for the e-all-in-one printer HP Photosmart 5220 which may help.

  http://support.HP.com/us-en/document/c03955472

  Please note that you have already completed the first few solutions suggested by replacing your cartridges and putting back them in place.

  I hope that one of the other suggested solutions work for you.

  Kind regards

  Lynn_B

• my printer does not print in good clolour even after new ink cartridges install clean nossles p

  my printer does not print good color, even after you installed new ink cleaned nossles new cartridges cartridges still print does not correctly

  Learn the steps in the document located here. The document includes steps to help solve the problems of print quality in a B110a. Hope this helps, Peter.

• Printer cannot print black, even with new ink

  Original title: cannot print in black

  I cannot print black on my printer.  I changed printers, ink cartridges and tried printing in different programs such as Word, wordpad and Excel.  Other black print colors just not.  Can someone tell me what is the problem?

  When you installed the printer cartridge, did you remove the protective sticker on the cartridge? Sometimes people forget to remove this and install the cartridge.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Photosmart 6520 print not in black after I installed the new cartridge.

  I just replaced the black cartridge in a Photosmart 6520, and it will not print in black. Color cartridges print very well.

  Appreciate any help.

  Thank you

  Summer2

  Thanks to YouTube, I have set the printer. The screen under the black cartridge has been blocked. He just needs cleaning.

• try to print and mistake the light and the paper and ink lights flash. new ink in

  HP Deskjet F2210 all in one.  Windows XP.  Error lights when you try printing and the paper light and ink lights are flashing simultaneously.  New ink cartridges are.  I have reset the computor several times.  Also removed the print operation to try again, but the error light does not now turn off so there is no operations waiting to be printed.

  The steps in this troubleshooting page can help.

• HP PSC 1400: the printer does not print with new ink supply

  recently bought a mac book pro with OS X 10.11 El Capitan. Attached is my old HP PSC 1400 for my print/scanning works. System is automatically downloaded and installed the driver. The scan function works well, but I was unable to make an impression. Printer looks and sounds working with half ink cartridges but paper comes out clean, tried re install the printer several times but used to resolve printing problems yet. Can someone help me find a solution? Will be well appreciated. Thank you very much.

  Skypointer

  Hi @skypointer,

  Thank you for visiting the Forums from the HP Support! I see that you can not print printer HP PSC 1400 series, you have recently upgraded to El Capitan 10.11 Mac OS X, and you are able to scan. Your ink cartridges are half full.

  I see the printer must be installed using updates Apple, as there are no full software features and drivers available for the older model of printer, see here: install a printer Mac driver by using Apple Software Update

  Once you have installed completely, I wish you continue troubleshooting here: Missing, Faded or dull colors, when you print a test page the fact also come out blank?

  Once you complete the print quality paper you are now able to print? If you are unable to print, you may need to change the ink cartridges. Let me know the results, I'll watch for your reply.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution". If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say thanks for my effort to help, click on the "Thumbs up" to give me a "Bravo".

• Printer does not print after installing new ink cartridges

  I have a Lexmark X 2500 printer. After installing new print cartridges, the printer gives me the error message to order more ink. The printer does not recognize the new ink cartridges that have been installed.  There is a warning on the ink cartridges to do not touch the contacts on the bottom of the cartridges. If this happens, how can I make them work?

  Richard

  You should contact Lexmark as they know their best products and we can onlu support of Microsoft products on this site.

• Photosmart 7520 e: quality test ok, print faded, print new ink cartridges. In / uninstalled Adobe R DC

  My printer went from fine print only for color printing and now only copying glass screen.  The print quality test is very good, all the colors, including black are very good.  All new ink cartridges.  Recently installed Adobe Reader DC and then removed. Mini Mac OS X v10.9.

  I have to uninstall and reinstall the printer software?

  It should be written on the old software. When you are rested and ready to tackle the issue once again let me know.

• my habit of nx1300 epson print more help, I just put 1 new ink cartridges, and then I put in all 4 still not working

  I just put 1 new ink cartridges, then I put total 4 still does not work

  Hi mimi,

  Please contact Epson technical support for assistance: http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp.

  Good luck!

  Kosh

• OfficeJet Pro 6830: Installed new ink cartridges on 6830, but they were not full

  I've been using this printer for about two years now, been through "Print head problem" for both, they exchanged once and replace only the part once.

  My ink colour C, M and there were emptied at the same time, so I ordered all three in an online store. I installed a few minutes ago and check the ink level via the touch screen of the printer. It turns out that they are not quite complete. They are almost full, C and are close to full, but M is less complete.

  I wonder why this happens? I never checked the ink level in the past, but it surprises me. The printer makes some kind of calibration and printhead cleaning to get ready installed ink? (So consumed little ink)

  I scanned the QR code on the side of boxes of ink and checked the hologram stickers and pretty sure that they are genuine. The printer also said that they are authentic.

  Here is the picture of my ink level. Shot after installation of the cartridge and nothing printed.

  

  Another strange thing is the date of installation. Now it is April 4 in my country but the web printer configuration page shows cartridge installation date is April 1! I checked the date and the printer and everything is OK.

  If the cartridges have been used before, the printer screen would show a message that cartridges have been used on another front printer. I saw only me because I kept the old ink before trading in the past as I said up there.

  Please see a screenshot below

  

  Everyone knows what happened? Or it's normal? (The packaging and seal in plastic cartridges seemed fine, nothing suspected weird)

  Thank you.

  Welcome to the HP Forums

  @BlackMiracle,

  I came across your post about the concerns that you have with the help of your new ink cartridges and I wanted to share my own suggestions. The date being out for a few days is a bit strange, but the rest seems normal. Yes, when you install the cartridges, they are calibrated and alignment and clean, that uses a bit of ink. The levels that you see are also "estimated" levels If there are print quality problems or error messages, let me know and I'll do my best to help.
  
  I hope this helps!

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,
  
  Contact HP:
  
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• New ink cartridges do not work

  I inherited a printer HP Deskjet 3070, which has already been used. I bought new ink cartridges, but when trying to install these has received the error message that I need to use the cartridges of the establishment to assess the ink levels and once this is done can change for the new cartridges.

  Unfortunately, the printer cartridges comes with do not seem to be setting up those and now the printer accept the original or the new.

  Does anyone know how I can go forward - it doesn't seem to be any problem with the printer?

  Hi @LorieB,

  Welcome to the HP Forums!

  I see that your new ink cartridges do not work with your HP Deskjet 3070. I'm happy to help with this problem!

  I would like to recommend please call our telephone support to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• We have a printer All - in 6110 and very slow to print. a page in 30 min. new ink cartridge.

  We have the all in one 6110 and now its very slow print new ink cartridge and the downloaded drivers but it shows only a page in 20 to 30 min. is not a difference in color or black and white.

  Help, please.

  This is caused by the failure of one of your cartridges.  I don't know if supports Officejet 6110 print reserve mode, but try the following: remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• Cannot access the printer software after installing new ink cartridge

  I installed new ink cartridges. It prints well but I can't access the printer on the computer action tab. I can't check ink levels, align the pages or check on maintenance. When I click on the folder of the printer it opens but it says it's searching for items. The printer of action file is not there. Anyone know what could cause this? I can't open the Toolbox of the product. What I have to reinstall the printer software, or is there something else I can do to fix this. I have windows 7 and a 3000 deskjet printer. Thank you.

  Harold R. Rodgard

  Hello Harold,.

  The question most likley do not have much to do with the replacement of the ink cartridge.

  Lately, HP has released a new software, due to the latest MS updates, you must update the software to get all the features.

  Go to start > programs > HP > select your printer folder and follow uninstall them.

  Now, download and install the new version of the software from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DJ-109022-2&cc=us&DLC=en&LC=en&OS=4062&product=4066429&sw_lang=

  Shlomi

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear