Photosmart C7180 and Mac OS 10.6.8 drivers? connect to the router?

Similar Questions

• Wrt54g and Wrt54gl configure WDS, but can't connect to the router

  I tried searching the web and this site but can't find the soluction. Please notify

  Here is the configuration, I installed wrt54gl with dd - wrt standard version running hotspotsystem.  3 wrt54g version 5 with dd - wrt micro configured as client WDS wrt54gl.  After the initial setup I can connect the main router wrt54gl (192.168.1.1) and all 3 routers WDS (192.168.1.2, 3 and 4), but after a few days of tests suddenly I can not connect to 2 WDS routers.

  I want to say I can connect and he will make me to internet but I can not login to stay, he says just the page takes too long to load.  I know that if I do a hard reset and the WDS installation program then it will work, but I don't want to keep doing.  Someone has an idea?  Tried power but cycle anyway, the router does not work.  What is the load on the router made inaccessible?  Any suggestion would be great!

  Ask a dd - wrt forum.

• Mac mini as a media server connected to the hi-fi amplifier

  Hello

  I am considering a Mac Mini to replace my old Lacie Cinema player as my media center. It will be connected to television and, ideally, analog hi-fi amplifier for sound.

  Here are my questions and special needs:

  -want to browse my music library and control the Mac through my iPad or iPhone. Don't want to use the keyboard or the physical remote. Do something like plex installed on ipad control files that reside on the Mac mini (or external hard drive connected to the Mac Mini)?

  -as my amp is analog (with RCA plugs) I guess I have to convert the RCA plugs to the digital amplifier. A Mini Mac USB RCA DAC exist?

  I think that's it! Thanks for any help.

  marcospt wrote:

  Hello

  I am considering a Mac Mini to replace my old Lacie Cinema player as my media center. It will be connected to television and, ideally, analog hi-fi amplifier for sound.

  The Mac Mini are very small computers.

  (for me, it almost seems like a waste to use as only a media center. I use my media center and an office at the same time)

  -want to browse my music library and control the Mac through my iPad or iPhone. Don't want to use the keyboard or the physical remote. Do something like plex installed on ipad control files that reside on the Mac mini (or external hard drive connected to the Mac Mini)?

  Not sure about this one. I am a user of office and control my media from there.

  -as my amp is analog (with RCA plugs) I guess I have to convert the RCA plugs to the digital amplifier.

  Everything you need for an analog RCA connection is a stereo 3.5 mm to RCA cable.

  example > http://www.amazon.com/Dynex-Mini-Stereo-Audio-Cable

• My photosmart c309g-m is connected to the router by ethernet cable. Can I add?

  My photosmart c309g-m is connected to the router by ethernet cable.  Can I still add to e-print?

  Hello

  Is a printer ready ePrint? You can use the home router to access the internet? If Yes and Yes, then you should be able to do.

  Kind regards.

• Configuring the network for windows7 and computers portable XP with printer connected to the router

  Computer laptop windows 7 works with the printer lexmark that is connected to the router, but the laptop XP who worked with the printer can't find using the "add a Printer Wizard. Two portable computers connect to the internet O K

  Printers configured in this mode are better develop a fixed TCP/IP address.  Your printer manual should tell you how to do this.  In general, there is a 'Settings' menu on the printer where it can be defined.  The IP address should usually have the first three digits than other devices on the subnet (for home networks it would be something like 192.168.1.x) and the final number should be unique and apart from the DHCP numbers range that your router would normally assign (see the manual of your router).

  HTH,
  JW

• my laptop connects to the router but said validation of identity and remains in this mode

  using windows XP my laptop connects to the router but I preserve identity validating is... can help you?

  This probably means that your WiFi has become misconfigured.

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on your wireless adapter icon and select "Properties".
  • Click the "Wireless Networks" tab.
  • In the list of "Preferred networks", select the entry that corresponds to your router, click 'properties '.
  • Click on the tab "authentication."  At this point, you should see a screen like this
  • Uncheck the box at the top that says: "authentication Enable IEEE 802. 1 x for this network. "
  • OK your way out.

• I recently changed internet service providers and now my Wired desktop can't connect to the internet.

  I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

  Hello

  Follow the steps in the KB article below and see if that fixes the problem.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Hi, I just paid for this 11euros per month thing, for Lr and Psalm I had the trial version installed before and now I paid, I can not connect to the bloody thing, it asks me to enter a serial number, which I do not have... everyone has

  Hi, I just paid for this 11euros per month thing, for Lr and Psalm I had the trial version installed before and now I paid, I can not connect to the bloody thing, it asks me to enter a serial number, which I did not... someone has a solution for me please...?

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• Photosmart D7460 with wireless does not work with Win. 7 ultimate connected to the router

  I have a desktop HP upgrade to Windows 7 Ultimate and the new HP printer driver has been downloaded and installed. It seems to print via the server message/controller but is never to the printer or to a file if this opton is selected.  I have also a laptop on group residential network running home premium 7 and same driver.  It works very well to the same printer.  The printer is connected to the wireless router as it is the laptop.  The office is connected to the router.  Any suggestions appreciated that I'm obviously above my head.

  Thank you

  Jackie Draffen

  NO I haven't installed upgrading to windows7 after problems with her 7 installed.  I think it worked a little but only showed 3 ink levels and other problems

• Update Adobe CC reaches 5% installation point and error reads as follows: "try to connect to the server...". »

  Update Adobe CC reaches 5% installation point and error reads as follows: "try to connect to the server...". »

  Thank you in advance for your response guys.

  Hi yusney,

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• Printing with the photosmart 5510 and MAC 10.7.2 is a dream? and I don't even go to part scanning

  Wauw, buy a photosmart HP 5510 printer and you are very busy for Christmas together to print wireless?

  Unpack your photosmart 5510 and install?

  Well, it prints 1 page and then you get the message printer isn't ready if you want to print your next page.

  1st day, I try with my own knowledge.

  
  

  Updates

  Reset the router.

  Work with difficult IP put in the printer.

  Change the IP address via the Web interface.

  Change the settings of the router

  Try to reinstall the software which is not even possible that most all do the manual says that it is.

  Still 1 print and then nothing. Reset the printer or change the IP in the difficulty of the printer, labour, still 1 print or scan or 1 airprint but then nothing.

  (printed about 35 pages of BS as test)

  Day no. 2, new day of new towers

  Looking around the God thank you forum I'm not the only one who has this problem.

  A lot of people, same problem, some struggle for 6 months, contact support without success.

  Damm scan I even was going to this party and look at all the users having problems. Allow me to first impression please.

  And right now, it looks resolved advice and try to do the same. No results at all.

  Day still no 2, but I can't download now...

  Come on guys read it all, it seems that you are lucky, when it works. You must be a programmer if it works.

  My main question is;

  -Is this or Steve Job knew this?  This product is in its Apple store, HP uses the Apple logo.

  -Sell HP t - he produced cheap now and get the money back to test everything print and use the cartridges?

  -Are there hope or solution let this work smooth with what the box and ads tell?

  -J' just forgot a small no and someone give me the solution?

  -In a lot of wine in these days of Christmas?

  Hope someone can help me and get this Photosmart 5510 working (printing, scanning and airprinting it says on the box)

  Hi ShiomiL,

  A tried these last few months, a lot of time to get the HP works as it should work (especially the airprinting and scan) without any success.  We used with IP printing/scanning, which wasn't a problem, but does not give us the full possibility of the HP printer.

  Today I bought an apple Extreme airport, connect and a few seconds later all works perfect

  In the end, so it was the TL-WR741N (the latter replaced by apple airport) that give problems.

  I just wanted you to know and say thank you for the support you give.

• HP Photosmart C7180 and error 0xc18a0107

  I have this problem since the move U.S. (02) form to EU (363). Currently the authentic NEW cartridges are recognized and accepted, but their level of ability on screen is different heights. Is the same with the ink levels for example black is empty, magenta and cyan close to be replaced. But in the meantime I printed only one page of diagnosis (and it's the only page I can print using my 'empty' black ink).

  I tried to erase the error message, reset the unit (using procedures known by unplugging), remove and replace the cartridges but without success. The problem is probably caused by the resettlement process where control numbers do not match.

  Any ideas how to solve this problem? How reset the memory of the device to force it to install the cartridges from the beginning?

  The solution to this problem is to remove the battery on the motherboard (solution drawn from the Internet) for a while. I did and put the battery back in the next day. Finally, I can use this camera.

  Remove is not the will of the battery:

  -reset the counter of resettlement, the meter of total pages etc.

  -reset the things that need to be corrected (for example the levels of capacity for cartridges)

  + but resets the date and time that cause all the old cartridges working without warning.

  + and finally remove the error 0xc18a0107 message blocking

• I have 5 Lightroom and Mac OSX 10.7.5 - then - I use the new a7II Sony RAW format?

  The SONY/LIGHTROOM compatibility?

  I have 5 Lightroom and Mac OSX 10.7.5 and I am considering a new camera Sony a-series (a7II).  Sony's RAW format is not compatible with my existing software?

  You need to update to Lightroom 5.7.1 (it's free)

• PhotoSmart HP 7520: HP7520 "offline" but works via EWS (and is connected to the router)

  The printer used to work, do not know why it stopped, but the problem occurred several months ago.

  HP7520 said it is connected to the network, same SSID, and the ip address is in the same range.  More importantly, I can print test pages and scan through the integrated Web server.  If the printer is on the same network as the netbook.

  Material used is a netbook from Toshiba Windows 7 (32 bit) / and an Asante (WEP2-Personal, WPS) router, internet Optimum/Cablevision.  Only security is the Windows Firewall, which I disabled it for the areas and home networks.  The network is defined on a home network.  NetBook, iPhone, Android, Roku all connect properly to the network.

  The properties list to the printer the printer as being associated with a Standard TCP/IP Port - IP in the same range as the printer.

  I rebooted everything several times, released and renewed the ip address, check the router manufacturer for the latest version of the firmware is installed, installed the HP Assistant troubleshooting, reinstalled printer drivers and the problem has not changed a bit.

  Any suggestions?  I have read several posts have reported similar problems, but have not found a solution.

  Yes, it did.  I wish I had thought to post here months ago.  Thank you!