Photosmart HP 6520: Error 08024200 b ×.

Similar Questions

• Photosmart HP 6520: HP Photosmart 6520 - error message when you try to use the apps

  I can't access is more apps on my Photosmart HP 6520.  I get the error message "error connection server - 1".

  I don't know if this problem just since I recently changed from a Windows PC on a Mac.

  I very rarely use the apps, so I don't know when it started.

  Everything else seems to work very well I would say.

  Can someone please tell me what could be the cause, or if there is something I can try to sort it out?

  I seem to be going round in circles, and I can't work on what is happening.

  Thanks for your help.

  Hey @TraceyMac,

  Welcome to the Forum from HP Support.  I hope you enjoy your experience here.

  I understand that you are unable to use the pads (Print Apps) on your HP Photosmart 6520 e-all-in-one printer.  I want to help you with this.  A recent installation of printer would not affect your performance of platelets but no loss of connection or wireless Web services could be a factor.

  Note that to access the applications and their use from the front panel of your printer requires two ingredients to be successful: 1) Wi - Fi connection and 2). the ePrint feature (webservices are enabled).

  • Touch the wireless icon () on the front panel of your printer - is the printer connected to your wireless network?  (If not, run the wireless configuration wizard, select your network name/SSID and enter your password wireless reconnect).  If you are connected, proceed as explained below.
  • Tap the icon of webservices/ePrint () on the front panel of your printer.
  • If webservices are not enabled, press OK in order to enable them and allow the automatic updates of printers.
  • This will cause your printer to print an information document describing the characters before @hpeprint.com your printer (ePrint address).  This is known as the claim code.  As another way to use printing applications available for your printer, you can sign in to http://www.hpconnected.com to program applications printing to print and review all the content that ideally will reappear on the front of your printer.
  • From there, you can click the devices tab and use the claimcode to add your printer to the site and take advantage of the available applications, it.

  If these basic steps to respond to a resolution, please, try the following:

  When users encounter this type of problem in general, I suggest from scratch with wireless printer, webservices, and apps printing configuration.  You can clear all of these parameters in a swoop by the factory default restore * your printer.

  Here's how:

  * Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.

  • Front panel of the printer, arrow down and select Tools
  • Select restore default

  Then touch the wireless icon, run the Wireless Setup Wizard to restore your network connection, and then tap the Webservices () and reactivate your webservices.

  If you are able to successfully reactivate your webservices, tap on the icon of your printer wireless () and make a note of the IP address of the printer.  Then, follow these steps to configure a manual DNS:

  • Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
  • Click the network tab.
  • In the submenu on the left, click Networking.
  • Then click on the network (IP) address.
  • Click Manual DNS server.
  • DNS preferred as 8.8.8.8 manual entry
  • Auxiliary DNS server entry as 8.8.4.4
  • Click on apply to finalize this change.

  No none of the suggestions above restored the functionality you're looking for?  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to say "You rock!" by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support.  Have a great day!

• Error 08024200 × b.

  Hewlett-Packard - imaging - printing - HP Photosmart 5520 series - Null error 08024200 b ×.

  Not solved. Microsoft waiting problem solution.

  Thank you.

  Good bye.

  Hello.

  Now it's OK!

  Thank you very much.

• Photosmart HP 6520 prints only in black, even if only selected

  When I select 'black fast project only', I get a printing color. I replaced the black cartridge and the test print just fine. So everything I do or try, can't do the printer to print black scale and Yes more, I have this default :-).

  I use OS X 10.9 Mavericks.

  Driver software & installed properly.

  Please advice. I have about 400 slides to print for studies and most of them is color pdf, it's expensive to print in full colour.

  Thank you in advance!

  Li

  Hey Ladyli

  Welcome to the Forums of HP Support! I see you try to print in black and white for your Photosmart HP 6520, but since I use Mavericks even if you have defined, printing prints always in color.

  I would like that you do the following:

  Reset the printing system

  1. click on the Apple icon and then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. Dialog Print & Fax/scan opens.

  3.right - click (or Ctrl + click) in the left panel, and then click Reset printing system...

  4. click OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Now go ahead and add the printer to the back and continue here: OS X Mavericks: set the print options

  You are now able to print without color? I'll watch for your reply.

  Thank you

• Photosmart HP 6520: Photosmart 6520 unable to analyze text editable

  I'm unable to analyze text editable my Photosmart HP 6520 to my pc HP Envy Phoenix running Windows 8.1 64bits.

  It is possible to scan the document to the pc in pdf format.

  It is possible to convert the PDF into a Word document, but the text is not editable.

  Is anyone able to help me with this please?

  Note: I am able to convert pdf files sent to me by e-mail in word with editable text documents.

  Hello @petermfwlet,

  Welcome to the Forums of HP Support!

  I understand that you want to scan files editable text your Photosmart HP 6520 e-all-in-one printer to your Windows 7 computer. Because it is a Photosmart printer text editable reading iris (OCR) software does not come with this printer model. In order to have the editable text supported HP options offers you will need to use a model of the Officejet printer. By saying this, you may be able to use third-party software of the seller to scan documents for editable text. You can also analyze your HP Photosmart camera PDF files and use a third-party vendor software to convert the PDF file to a Word document.

  Please click here for instructions on how to scan a PDF document via the HP scanning software. Once the PDF file is saved on your computer, you will use the third-party software to convert the file.

  I can not recommend a third party software to convert or analysis files to editable text. However, I did a search on the internet and found a list of programs that can suite your needs:

  PDF to Word Converter

  The editable text - Windows scanning software

  Please let me know if the information provided has been helpful. I wish you good luck going forward with this!

• How can I reset my original Photosmart HP 6520 to its original configuration?

  How can I reset my original Photosmart HP 6520 to its original configuration?

  Hello

  Please follow the steps below.

  Setup menu > tools > restore default settings

• How can I configure my photosmart hp 6520 series be0830 scan in color

  When I scan with my hp photosmart series 6520 be0830 scan it in black and white. How can I put it to scan color also.

  Thank you

  Hi wallycracker,

  The following steps may resolve this problem.  The setting can be changed by the software.  For more information on this product, you can always visit the following link.  Click here

  1. Open Printer Wizard (the printer on the desktop icon)

  2. under analysis, click on scan a document or photo

  3. when the scan dialog box opens, choose the color from the drop-down list output type (see image below)

  4. change the other settings as you want, and then click scan

  

  I hope this helps!

• PHOTOSMART HP 6520 does not print black. And the ink levels estimated for the other inks are not correct.

  Hi, I bought my photosmart Hp 6520 year last, October. But it is no more print black after replacing ink twice. I tried to clean the print head with water and tried "clean print head" in tools, does not solve the problem...

  What is wired is that I bought 4 new 564 inks the hp of the target 2 days ago, printed only less than 10 pages to see if the problem is resolved. Then my printer told me that the cartridge is too low... Is this possible?

  It makes me crazy now... What is even worse, I used a tool to detect my printer, and he said that is no longer under warranty... But he was only 9 months... How can I solve this problem? Thank you.

  The document here can help solve the black does not print on your Photosmart 6520.  Be sure to check the vents, as on the three solution.

  If this does not resolve the issue I suggest you call HP (1-800-HPINVENt to the United States, see here for details by the way).  The warranty online tool is an estimate, they will have a process of updated the status of the guarantee if necessary.

• Photosmart HP 6520: Ink alerts for error tracking and hpstatubl.dll

  Toshiba laptop.

  Windows 7 64 bit home edition.

  All-in-one printer, HP Photosmart 6520 - connected via a Belkin router WiFi range.

  I get the error alert "HPStatusBL.dll" not found

  My research indicates that the problem is that the software of the ink of the State monitoring reports has been removed, but has left this link dll with no module to run if an error is reported.

  I don't want to remove the source of the error, I want to restore the State of ink to the laptop.

  My laptop reported my printers ink status, but apparently, this program module has been removed. ! ? ! ? !

  How can I reinstall the software that should be followed the printer to displaay on the laptop?

  (I can't find the disk I got with the printer. If that is where it is)

  Best thing to do is to completely delete all HP software and remove the printer to reinstall.

  Use http://www.iobit.com/en/advanceduninstaller.php and use a powerful scanner at the end and remove all registry entries.

  After that, reinstall your printer by installing the drivers and full software here.

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-6520-e-all-in-one-printer-series/5169038/model/5169040

• Photosmart 6520: Photosmart HP 6520 - 403 Server error

  Scan to e-mail does not always... Despite several attempts (patients) completely out of power. Due to disconnect. Pending. Connection back. Turning the power on. WiFi connection is enabled. Everything else works. WHY the server error still comes? Printer has only a few months. Photo scanning to e-mail worked 2 weeks ago. nothing has changed. UGH!

  You can try the steps below and check if your issue is resolved:
  1. tap the ePrint button located on the top left corner of the screen.
  2. go to settings and then seek to remove Web Services, press Yes. He should return to the home screen.
  3. Press button ePrint again and then agree to the terms, press Yes if you are prompted to enable automatic updates, and then once done at the time of process scan image.

• Photosmart 6520: Photosmart 6520 error loading paper

  I can't print jpeg files. The sas to the printer that the tray is empty. It is not the case. I can print a MS Word document or make a copy OK and paper feeds correctly. The printer is on my network and communicating properly. It's not my computer print.  I tried all the solutions on the help pages and have run the downlod of Solver problem without success. Help please!

  I'm starting to wonder if the printer itself is having a problem. Here's what we'll do.

  On the printer, click web services icon that looks like a tablet with a phone beside her.

  Click settings.

  Click updates.

  Click Find updates.

  When the update is complete turn off and turn on the printer.

  Try to print.

  If you are still not able to print then the last thing to do are to perform a factory reset the printer. I'll send you some directions with how to do shortly on your printer.

  If after doing the reset, you still have questions, then the next step would be to contact the HP support directly. You can do this by clicking on this link and fill in the form below.

  I hope this helps and I hope you have a great day.

• Photosmart HP 6520 printer: hp photosmart 6520 cannot set print at 100% scale/size

  What CD jewel box impression label width and higth suddenly became smaller. It works perfectly until recently. Have uninstalled and reinstalled the printer and drivers, but I am unable to find how re set the scale to 100%. in this hp6520 Photosmart printer.

  Any help would be appreciated: very happy smiley:

  After watching your @dlddemonscreenshots, I see that you use the HPDD896C (HP Photosmart 6520 series), it is a driver not driver HP class.

  I suggest all first to remove this driver and add the printer again. In fact, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).  The installation screen and the software opens and you can click on connect a new printer.

  Once you have added the HP driver, try to print a label again and let me know the result. In addition, you may need to change ' borderless printing: Print with border ' borderless Print.

  Let me know how it goes.

• photosmart HP 6520 trying to print from the ipad, but it keeps telling me tray paper empty

  I try to print from my ipad and it still says that the paper tray is empy, when it is not.  I think he wants to "photo paper" and I don't want to print a photo.  ??

  HI Vicki_O,

  Welcome to the Forums of HP's Support. I understand that when I try to print from your iPad using Apple's AirPrint feature that you have found an error output of paper for the printer Photosmart 6520.

  I suspect that you are right and the AirPrint feature is that the document is printed as an image file, so it's like a photo manipulation. I have included document Basics AirPrint from Apple. For any additional consultation, I've also included HP How to use Apple AirPrint on a wireless network.

  If you want more that what is available with Apple's AirPrint printing options, you can use the application Mobile HP ePrint. I've included the HP ePrint Mobile App FAQ document.

  If you want to scan from your printer directly on your iPad, you can always download the AiO Printer Remote app from HP.   I've included the HP all-in-One Printer Remote Mobile App FAQ document.

  If you need further help, feel free to post back.

• Windows 8 is showing my photosmart HP 6520 is offline now

  I have a new HP Windows 8 and a new printer HP Photosmart 6520.

  When I go to print - I get an error message in offline mode

  This link should help with your problem.

• Photosmart HP 6520: I can't scan plus

  It works fine but now I can not suddenly scanner and the "general failure" message appears.  I go through the computer using the "HP Scan and capture.  I tried to unplug etc, but nothing helps.

  Hi @JJPH,

  Thank you for visiting the Forums from the HP Support! I see that you get an error message 'the General scanner failure' on your HP Photosmart 6520. You have tried a reset and use the application to scan and Capture without success.

  You are able to make a copy? What happens if you make a copy, this same error message pop up?

  Please go ahead and launch HP print and Scan Doctor > www.hp.com/go/tools- it was designed by HP to offer users troubleshooting and characteristics of fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  What is the PSDR?

  I'll watch for your reply.

  To simply say thank you, click the "Thumbs up" below!   If you need more assistance let me know and I will gladly do everything I can to help.