PhotoStory3 "motion and duration."

Similar Questions

• Printer goes through the motions, and I get a blank sheet of paper

  Original title: printer does not print

  I checked to make sure that my printer is recognized on my laptop, I went through trouble shotting and also I saw that I print but printer goes through the motions and I get a blank sheet of paper.  is it possible that the ink is dry? I look like I have need ink to be

  Hello

  Thank you for keeping us posted.

  I suggest you to read this article for more information:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01892627&cc=us&DLC=en&LC=en#N3390

  Hope this information helps.

• How can you import resource gal and durations of resource to P6?

  How can an import resource offset given to P6 of .xls, .mdb, .csv, ASCII files, resources etc. ?
  
  P3 easily done, but I can't find how to get data without manually enter in P6, activity by activity, by resource. If I don't, my resource profiles and costs are not valid! I have TONS of data to deal with, so manual entry is not practical. What I'm missing here? H-E-L-P!

  user8938583,

  Is not to be feared... P6 does a decent job of the import and export of data via Excel... just be careful do not change the column headings in Excel (bad move).

  GAL and durations can be exported in Excel (like many others).

  First of all, create a new P6 custom export model, select "Resource assignments" & choose the data fields you want to export (WBS, project, activity, "Original Lag" or "Remaining Lag" or od ID), and then enter a destination for your new Excel file.

  Export to Excel

  " Modify Data, open the"TASKRSRC"worksheet and change the data in the following fields as the initial offset necessary" or "Remaining Lag", "Initial term" or "Time remaining", Excel to save file.

  * Reimport P6 *.

  May require more than one import/export in order to make all your changes of different...

  Good luck

  Published by: p3_scheduler on January 4, 2010 13:15

• Reduce consumption of battery motion and automatic brightness

  Hi, I would like to know some things.

  First: activation reduce motion put on iPhone save the battery life since perspective wallpapers are being turned off when the low power Mode is on?

  Second: Automatic Rotation of the brightness to the wide and holding the brightness at Midway to consume less energy than to have automatic brightness, allowing the iPhone to constantly check our environment and adjust the brightness?

  Thank you!

  To the first question, while I can't tell you with certainty, yes reducing motion should keep a battery life.

  To the second question, it depends. If automatic brightness is to keep the phone on a higher setting to half way then it would be. If A - B fits between a minimum and a high level, then probably not. I keep A - B on all the time and I have no problem with the battery life, but if I'm outside it would be a trade off between being able to read the screen and save battery.

• Motion and Compressor

  Hello, today I would like to know on the compressor and the movement.

  I didn't know what was the Motion, but I do not understand what is the compressor.

  Also, when I look at the compressor on the Apple site, I noticed that

  the page of the compressor and movement the page where it is quite similar.

  Could you please tell me the difference between people, and what exactly is the compressor?

  Since you already know that the movement is used to create animated graphic, I'll just say a few things about the compressor, which is actually very different from the movement.

  The purpose of the compressor is to take the media files that have been created by another process - say, in software like Motion or Final Cut - and change its specifications so that it can be optimized for different purposes. For example, you could have a video file that is too big to play effectively from a Web server. Compressor offers the tools to re - compress the file so that it is much smaller and allows to produce the best compromise between size, quality and playability.

  It also allows you to take multiple files and their lot of re-encoding - or apply multiple encoding parameters in a single file to achieve the objectives of different delivery.

  HTH

  Russ

• Frequency minimum step length and duration list minimum for the frequency lists in the generator of signals from NI 5406

  Hello

  We need power RF amplifier with a function generator to create plasma in an ion source. The signal pulse duration must be 1ms long, repeated twice per second.

  Today, we work in the following way: we spend the RF with f0 (aprox 1,995 MHz) frequency. After 20, we send a trigger signal passing frequency f1 (aprox 2.005 MHz).  We keep this frequency for the rest of the pulse.  However, the plasma that we generate is not 'constant' or stable during the whole impulse. If we smoothly change the frequency during the pulse we could improve.

  We would like to do: use the frequency sweep: rather than use this frequency hopping, we would like to move smoothly f0 f1 (frequency scanning). Then F1 to f2.

  As we have a PXI for data analysis, we believe using the arbitrary function generator of NOR: 5406 of NEITHER allowing the frequency sweep. However, in the book loads, it is not very clear, and I have a few questions:

  -We can create a "list of frequencies. In the site OR below, it shows that the "minimum of Step' is 1.28us, which would be ok for us (I understand that the"minimum duration of Step"is the minimum time between 2 frequencies). However, the manual of the device "NI PXI/PCI-5402/5406 specifications" said the frequency list has a time step of 1 ms to 21s. What is the good?

  -It is also said that the "duration of minimum list" is 1 s. For us, need us a shorter list that 0.5 seconds (we need to repeat the same pulse twice per second.). Is it possible to do what we want?

  -At the end of the day, we would like to implement a control loop which modifies the list of frequencies in real-time.

  http://zone.NI.com/reference/en-XX/help/370524L-01/nisignal_generators_help/features_by_device_smc/

  Thanks for your help.
  Best regards
  Jose.

  Hi Jose,

  You're right about the inconsistencies of the documentation. The minimum step was of 1 ms, but was changed to 1.28 µs to driver version 2.6. The help document has been modified to reflect that, but the specifications were not. I'll make sure that attaches.

  The length of the minimum list is not listed in the book loads, and the latest version of the help the signal generators OR (driver version 2.9) lists the minimum list than the 1 step length. Aid has changed to the driver version 2.6.1 to clarify that the 1s meant 1 step. I've attached a screenshot of the help of the most recent.

  There is an example that is installed with the NOR-FGEN driver called "Fgen Sweep Generator.vi". I would recommend from this for your application.

  I hope that some of the inconsistencies in our documentation brightened. Please let us know if you have any other questions.

  Elizabeth K.

  Generators of signal produced technical support engineer

• mvadmin repeat_interval settings and duration

  Hello
  
  Can someone give me the specifications for the repeat_interval parameters and the duration of the < schedule > tag in a file XML, in MapViewer Administration refresh_tiles?
  
  Specifically, what are the units for the repeat_interval, and that means the time setting?
  
  Example XML content:
  
  <? XML version = "1.0" standalone = "yes"? >
  
  < map_cache_admin_request >
  < tile_admin_task
  operation = "refresh_tiles."
  map_tile_layer = "IGSERP_1.T_ORTHOTILE_8307_1091016".
  zoom_levels = "1,2,3,4,5,6,7,8,9".
  BOUNDING_BOX = "- 80.247296875,33.431625, - 74.9895390625,36.9525859375" >
  "< annex start_time ="2010-06-17 02:00 "repeat_interval ="0"duration =" "/ >
  < / tile_admin_task >
  < / map_cache_admin_request >
  
  Thank you
  Dan

  It's true.

• Use the project start Date and duration to calculate the end Date of project

  I'm trying to calculate the end date of the project in a report using the project end Date and time entered on the opportunity.
  For example, if the start date of the project filled an opportunity is 31/01/2009 and the length (integer) is entered on the opportunity is 5, the project end date is in the report must be 30/06/2009.
  
  I'm trying to TIMESTAMPADD forumaul allows you to add the duration (number of months) to the project start date
  This Fx works TIMESTAMPADD (SQL_TSI_MONTH, 12, '-used Custom Attributes ".) DATE_40)
  But if I try to replace the number twelve by the length (integer field) I get an error when you try to save: TIMESTAMPADD (SQL_TSI_MONTH, "-opportunity Custom Metrics".) S_INT_0, '-used custom attributes. DATE_40)
  
  Any ideas on how I can get this to work would be greatly appreciated.

  Hi, try this. It might solve your prioblem TIMESTAMPADD (SQL_TSI_MONTH, CAST (YOUR FIELD AS INTEGER), account. (' "Last modified")

  -John CRMIT

• Re: A500 power icon shows only % left and duration (estimated) no real

  Hi I bought an A500 last week. Very happy with its features etc., however, I have a question where the power icon shows only % left.
  For some reason, it does not display the weather remains as it is supposed to. I took it back as long as you 'Out of Box', but the problem persists.

  I rang tech support who told me to take it to the nearest centre of Toshiba. Sms technology had me the next day to say that the task is complete. When I arrived at the shop and asked what was wrong, he said that nothing was wrong. "This model displays only the % and no time. I asked him where he has got that info from, it was Toshiba. He said that he checked the A500 on display for sale in store and that too showed the %. Then I jumped on the view model and verified by myself and here he showed the hours and the minutes remaining. He then said he would have another look.

  He even rang Toshiba who said that he could not be a hardware problem. So basically he and the person he spoke did not have a clue. Portable old man of the week, and I refuse to accept a machine that does not react as it is supposed to. Even the manual user talk taking system a few seconds after the power is cut to calculate the remaining time.

  During this time is there anyone out there who has experienced this or know what the problem is?

  See you soon.

  My a500 also shows % left and no actual (estimated) time :) To be honest, I don't think it's so important to worry.

  > I took it back as long as you 'Out of Box', but the problem persists.

  This means that this feature is not available.

• Simple: dll engine and DURATION

  Should I LV runtime to be installed on the machine to access the functions of the DLL built from the project of LV?

  Simple: Yes. And you will need the "correct" version

  Norbert

• I just tried to download Vista SP1 on my count, he went through all the motions and now my computer is nothing but a black screen.

  Very angry about this, until I tried to install this pack, my computer was working perfectly. Now, it seems that my entire system has been destroyed, and when I try to contact Microsoft, it seems that I have to pay $72 Australian, just to get him to talk to me. Seems hardly fair, that their pack which crashed my system. Someone has an idea of what he must do to either restore my system (without the use of disks to restart), or is anyone know how I can contact Microsoft without paying (since this is not a problem on my side). Any suggestion would be appreciated.  Regarding what happened, he went through the entire process of installation of the service pack, but when he stopped for the last time, the computer starts with a very simple beeps and then nothing, no white screen, no warning, no prompt, nothing.

  Will need you the DVD

  How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  FYI learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  TaurArian [MVP] 2005-2010 - Update Services

• All of a sudden my system became very slow and duration start increases 15-20 min.

  Hello friends,

  I have laptop model Dell XPS. This is the start time increases by nearly 15-20 minutes approximately.

  When I turn on the laptop computer, a black screen continue for 5 min. and then it displays the login screen. After entering the username and password it takes 10 min. until the screen is displayed and a circle begins to run on the icon network in the bottom right of the laptop screen as shown below:

  

  You can see run circle right next to the icon of volume and during that time, I can't even open the Windows Explorer.

  I have to wait until this stop running for the next 5 to 8 min.

  I tried to clean the useless/content files using CCleaner software, but nothing happened.

  What should I do now.

  Do I have to format the laptop. In fact I already format the laptop 4 - 5 times earlier.

  Thank you

  Hello

  Check with Dell support, their books online, the drivers/firmware, diagnostics,
  and ask in their forums known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ========================================

  Check in Control Panel - Device Manager to be sure is not a problem of such device
  as a USB device is not found (although it could be any device). If it is
  is a problem with a removable device power - take - off and then check that the
  difference.

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Microsoft Photo Story 3-How do to customize motion and picture formats

  Problems with photo story 3

  I love this program and just got a new computer with windows 7.  He did install the program BUT it is EXTREMELY difficult to customize the movement and the photos do not want me to drag them to new heights. This is one of the best features of the program.  Help I'm going crazy with this.  One of the main reasons we got this big new computer was so that I could play with my photos and more photos and effectively more holiday DVD.  I was scanning the hundreds of old slides for my father and put it on DVD so that he can enjoy all his old memories.

  Any help is appreciated!

  Hello
   
   
  a. what happens when you drag the image to a new format?
  b. has she ever work properly on Windows 7?
  c. is a problem with all the pictures or a particular file type?
   
  Because Photo Story 3 is compatible with Windows 7 and it should work fine.
   
  • Rather than click Import pictures, you can open the folder where your photos, click on the photos you want to import, and then make them slide to import and organize your photos on the page. However, you cannot drag image files with the following file name extensions to import and organize your photos page: .tga, .psd, .eps, .pcd and PCX. You must click on the button import the photos to import these files.
  • You can select and move only one picture at a time in the film strip. More you drag an image to a new location, you can click on an image and move it by clicking on the button move forward or the button to go back on the right side of the film strip.
  Another thing you can try is install Photostory 3 in Windows XP mode and check if it works.
   
  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to use several "Track Motion' and 'Stabilize the Motion' trackers.

  I am very new to After Effects. I looked everywhere for hours trying to find an answer to this question without success. I'm sure that I use while simply not the right search terms.  I have a video that is make up of 3 different clips.  I add a tracker of movement to stabilize her, he wants to apply it to the entire video in all three clips. Each of the three shots followed different points.  Is it possible I can specify the first tracker applies only to the Let's say the first 30 seconds, then add a second tracker to the middle with his own track point clip, then a third tracker for the end?

  All I can think to do is take the video share in 3 sections, and then apply the tracker each. When it's done I could then combine them into one video. Not the easiest if.

  Any help would be greatly appreciated.

  You must cut the clips and follow them separately.

• Photo "in motion" and becomes blurry

  You probably know this kind of photo:

  

  Is it possible to make it better?

  It would be really hard to not blurred hand.  It's blurred and the fingers are moving so you have 2 things to work on.

  You can try to mask filter/blur/sharpness and play with that.

  The easy way is to resume shooting.