Physical networks VPN multiple interfaces of the ATA.

Similar Questions

• MULTIPLE ADDRESSES ON THE EXTERNAL INTERFACE IP

  Hi all

  We put in place a number of ASAs for use with corporate VPN. When remote users connect using anyconnect they can hairpin on the Internet from Headquarters and must assign a public IP address for this purpose. To avoid people getting the same public address every time they go to the internet, we want to set up a pool of public addresses which will be awarded at random to the user of the VPN. Also, for their incoming connection requests, we have a ddns that solves a unique ip address for incoming connections. So, in summary clients connect to a single IP address on our ASAs, then hairpin at the internet and receive a public IP address from a pool. Look at us a few options to do so, but would appreciate any suggestions as to how best to achieve this goal.

  Thank you

  Hello

  It seems to me that the order of the chosen one NAT IP address of the NAT pool is random. I tested on my home with a pool of public addresses small ASA5505.

  I don't know if there is difference between different levels of Software ASA or rather the NAT configuration format. Since the 8.2 (and below) and 8.3 format (and more recent) is completely different.

  If we guess you configure NAT pool for VPN Client users connected to the ASA then configurations need you so

  Software of 8.3 and above

  permit same-security-traffic intra-interface

  object-group, network VPN-POOL

  Description the user VPN address Pools

  object-network 10.10.10.0 255.255.255.128

  object-network 10.10.20.0 255.255.255.128

  network of the PUBLIC-POOL object

  1.1.1.1 range 1.1.1.254

  interface of VPN-POOL PUBLIC POOL dynamic NAT (outside, outside) after auto source

  8.2 software and below

  permit same-security-traffic intra-interface

  NAT (outside) 200 10.10.10.0 255.255.255.0

  NAT (outside) 200 10.10.20.0 255.255.255.0

  Global 1.1.1.1 - 1.1.1.254 200 (outside)

  Global 200 (external) interface

  I don't know what is the amount of your user, but I guess you don't such a pool of important public addresses for users. The configurations above also contain a dynamic PAT when the NAT pool runs out.

  Is that what you're looking for?

  Hope this helps

  -Jouni

• Configure the virtual server to 2003 to use two physical network adapters on the host

  I have a virtual server (Server 2003) that I'm trying to point two virtual NETWORK card to two different physical NICS on the host computer.  The two network adapters on the host are on separate networks, and I can't get virtual network cards to connect properly.

  I use VMWARE Server 2 with the virtual network manager.  All good instructions would be greatly appreciated.

  Thank you

  Run the virtual network Editor.  Disable the automatic bypass.  Then, specify which of your physical NIC to the bridge to VMnet0 and specify the other physical NETWORK adapter on one of the switches (2-7, 9) unused VMnet.  In the settings of your virtual machine, select a virtual NETWORK adapter to be filled, and a 2nd we use custom connection and specify what VMnet switch to use (the one you filled the 2nd NETWORK card physical to).

• Help connect customers 2 linux on windows host 7 on 2 physical network cards

  I'm relatively a newbie, but I searched the forum and pulled some of my hair, I need help.

  I have 2 clients linux running windows 7. I want to fill each to a separate physical NIC Linux client

  Here's what I did:

  I have access to the vmnetcfg utility.

  Bypass: I can fill 1 image of the physical NIC 1 and this image connects successfully; the system allows me to fill the 2nd image as well as the 2nd NETWORK card, but the default value in the network address on the first NIC.

  I checked the VMX file and looks like that below, I could not find all the entries on the E0 or E1 interfaces, the VMids appear me as different (long number)?

  Customer 1 Image - file vmx

  Host networks: is it possible to combine physical network cards with the virtual vmnets? I could also connect the networks host with different IP addresses if it works.

  Thank you in advance for your ideas, I'd really appreciate your suggestions.

  jowuor wrote:

  If I assign an IP (1.1.1.1) to the first physical NETWORK adapter, open to vmnet0 and assign a different IP (2.2.2.2) address on the second NETWORK card deck to vmnet 2, the period of INVESTIGATION on the second NIC automatically goes to the IP address of the first NIC (1.1.1.1). I can understand is that 2 NICs are bridged automatically together in 1 bridged network. I want to that I'm not able to reach is 2 separate bridged networks, one on each physical NETWORK adapter

  To have a guest passed on a VMnet you don't need an IP address on the physical NETWORK adapter information.

  You cannot fill two physics to even the VMnet adapters (except you have a driver of consolidation on the host, but this will create a logic board that gets filled then). You must assign a (default) VMnet0 physical NETWORK card and the other to a free VMnet (VMnet2, for example). Each VMnet is a virtual network that can hold a single IP subnet, so it is not possible to have two cards with two different subnets physical in a single VMnet.

  Host networks: is it possible to combine physical network cards with the virtual vmnets?

  Yes. If you assign a physical NETWORK card to a VMnet it becomes another bridge.

  It's OK, but I would like to have 2 separate bridged networks. I tried this but I find myself with a single bridged network.

  Assign a physical NETWORK card to VCMnet0 and the other to VMnet2. This gives you two adapters bridged. In the prompt for the virtual NETWORK adapter choose what VMnet (and thus the bridge) must be used.

  This is a common configuration. Learn more here: http://pubs.vmware.com/ws71_ace27/wwhelp/wwhimpl/js/html/wwhelp.htm#href=ws_user/ws_net_advanced_linux_secondbridge.html

  AWo

  VCP 3 & 4

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• Bind Virtual Network Interfaces to the physical Interfaces

  Good day to all.

  My situation is as such:
  

  I have a virtual machine running Red Hat Enterprise Linux as guest OS and my host machine is a laptop running Windows 8.1. Each operating system has two network interface cards. I want to place the virtual machine on the line between a router that would be on the left (side Intranet) firewall followed by Internet on the right (side of the internet). I hope there is an option that would allow me to effectively "bind" one of each virtual NETWORK adapter to each physical NETWORK adapter, so that when I place the machine host on the network line, it would be like the VM would be online also. So, basically I want to accomplish what is highlighted in RED in my small figure above.

  The full rectangle is the guest OS with its two network cards on each side, and the incomplete rectangle is the host device with its own two network cards on each side. I hope that someone could point me in the right direction, it would be greatly appreciated.

  VMware Player, "Configure the adapter" parameters are indeed not unique for each virtual interface. You use VMware Workstation to meet your requirement. For workstation, you can create two VMnets and link your two adapters to them, then connect your two cards in the comments to the VMnet respectively

• VPN LAN - to - LAN ASA of the multiple Interfaces

  I have an ASA connected to 2 ISPs.I am on tracking object for the path of route 1 so only default is used at a time. I have a configuration VPN L2L out a interface. I would like to set up a 2nd VPN out interface B with identical settings.

  Is this possible?

  (Software ASA 8.2)

  card crypto PATH_A 1 corresponds to the address outside_1_cryptomap

  card crypto PATH_A 1 peer set 10.1.1.1

  card crypto PATH_A 1 set transform-set ESP-AES-128-SHA

  card crypto PATH_A 1 set security-association second life 28800

  card crypto PATH_A 1 set security-association kilobytes of life 4608000

  card crypto PATH_A 1 set reverse-road

  crypto PATH_A OUTSIDE_A map interface

  card crypto PATH_B 100 corresponds to the address outside_1_cryptomap

  card crypto PATH_B 100 peer set 10.1.1.1

  card crypto PATH_B 100 value transform-set ESP-AES-128-SHA

  card crypto PATH_B 100 set security-association second life 28800

  card crypto PATH_B 100 set security-association kilobytes of life 4608000

  card crypto PATH_B 100 set reverse-road

  crypto PATH_B OUTSIDE_B map interface

  !

  !

  ISAKMP crypto enable OUTSIDE_A

  ISAKMP crypto enable OUTSIDE_B

  crypto ISAKMP policy 1

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  tunnel-group 10.1.1.1 type ipsec-l2l

  tunnel-group 10.1.1.1 General attributes

  Group Policy - by default-MY-VPN

  tunnel-group 10.1.1.1 ipsec-attributes

  pre-shared key 123456

  !

  internal group MY - VPN strategy

  MY - VPN group policy attributes

  Protocol-tunnel-VPN IPSec

  Hi Bill

  This is possible, but add the same card encryption both of the inetrfaces

  crypto PATH_A OUTSIDE_A map interface

  crypto PATH_A OUTSIDE_B map interface

  and he is not allowed to use the reverse route command.

  You need to reach, but also "floating conn timeout 0:01:00.

  I used an internet connection for the site to site vpn and the other for all other traffic (default route). All routes taken with ip sla.

  I did it with 8.6

• Best design for the use of 8 physical network interface cards on a 5.1 ESXi host

  I have 8 physical network cards to work with on and 5.1 ESXi host using Enterprise Plus license.  I need to repair the following traffic:

  Management traffic

  vMotion traffic

  Virtual machine traffic (probably 2 natachasery will suffice for this)

  NFS traffic

  Won't fault tolerance.  Natachasery-how much should I dedicate to NFS, vMotion, and traffic management?  What failover policy I should use (active / active) (active / standby) for each?

  It is business more licensing and vSphere distributed switches are used.

  Thank you

  Yes, I would put the backup in the switch as well as management traffic and vMotion is they use vSS or vDS. The other option would be to reduce your vDS for NFS traffic of 4 natachasery 2 natachasery and then or to add to the existing vDS that contains management and vMotion VM traffic to add it extra bandwidth or create a new vDS with these 2 natachasery. But at the point of my original thought around creating a vDS is based on all of my bandwidth throwing together and then cut it but I want it and do not have to trade around natachasery after the fact. But there are so many different ways to achieve that is the fun part.

• Site to site VPN tunnel - cannot ping the second interface of the firewall peer inside2

  I have two ASA 5505 firewall each with a basic license: FWa and FWb. currently there is a VPN tunnel between them work. I added a second (inside2) interface to the firewall, FWb, but I can't ping firewall FWa, so that I can ping the inside interface of FWa.

  I can ping the FWb inside interface 192.168.20.1 from the FWa inside 172.16.1.1 interface, but I can not ping to the 10.52.100.10 of the FWa FWb inside2 interface. I can not ping the gateway host FWa 10.52.100.1.

  I show the essential configuration of two firewalls as well as the debug icmp output on the two firewalls that I ping the internal interfaces and of FWa FWb inside2.
  =========================================================

  Here is a skeleton of the FWa configuration:

  name 172.16.1.0 network-inside
  name 192.168.20.0 HprCnc Thesys
  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name S.S.S.S outside-interface

  interface Vlan1
  nameif inside
  security-level 100
  IP 172.16.1.1 255.255.255.0
  !
  interface Vlan2
  Description Connection to 777 VLAN to work around static Comast external Modem and IP address.
  nameif outside
  security-level 0
  outside interface IP address 255.255.255.240

  the DM_INLINE_NETWORK_5 object-group network
  network-object HprCnc Thesys 255.255.255.0
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  network-object HprCnc Thesys 255.255.255.0
  ring53-network 255.255.255.0 network-object

  outside-interface of the access-list extended permitted Outside_5_cryptomap ip host object-group DM_INLINE_NETWORK_3
  inside_nat_outbound list extended access allowed inside-network ip, 255.255.255.0 DM_INLINE_NETWORK_5 object-group
  permit access list extended ip host 173.162.149.72 Outside_nat0_outbound aus_asx_uat 255.255.255.0

  NAT (inside) 0 access-list sheep
  NAT (inside) 101-list of access inside_nat_outbound
  NAT (inside) 101 0.0.0.0 0.0.0.0
  NAT (outside) 0-list of access Outside_nat0_outbound

  card crypto VPN 5 corresponds to the address Outside_5_cryptomap
  card crypto VPN 5 set pfs Group1
  VPN 5 set peer D.D.D.D crypto card
  VPN 5 value transform-set VPN crypto card
  tunnel-group D.D.D.D type ipsec-l2l
  IPSec-attributes tunnel-Group D.D.D.D
  pre-shared key *.

  =========================================================

  FWb:

  name 10.52.100.0 ring52-network
  name 10.53.100.0 ring53-network
  name 10.51.100.0 ring51-network
  name 10.54.100.0 ring54-network

  interface Vlan1
  nameif inside
  security-level 100
  address 192.168.20.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP D.D.D.D 255.255.255.240
  !
  interface Vlan52
  prior to interface Vlan1
  nameif inside2
  security-level 100
  IP 10.52.100.10 255.255.255.0

  the DM_INLINE_NETWORK_3 object-group network
  ring52-network 255.255.255.0 network-object
  ring53-network 255.255.255.0 network-object

  the DM_INLINE_NETWORK_2 object-group network
  ring52-network 255.255.255.0 network-object
  object-network 192.168.20.0 255.255.255.0
  ring53-network 255.255.255.0 network-object

  inside_nat0_outbound to access extended list ip 192.168.20.0 allow 255.255.255.0 host S.S.S.S
  inside2_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_3 S.S.S.S ip host

  outside_1_cryptomap list extended access allowed object-group DM_INLINE_NETWORK_2 S.S.S.S ip host

  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  inside2_nat0_outbound (inside2) NAT 0 access list
  NAT (inside2) 1 0.0.0.0 0.0.0.0

  Route inside2 network ring51 255.255.255.0 10.52.100.1 1
  Route inside2 network ring53 255.255.255.0 10.52.100.1 1
  Route inside2 network ring54 255.255.255.0 10.52.100.1 1

  card crypto outside_map 1 match address outside_1_cryptomap
  card crypto outside_map 1 set pfs Group1
  outside_map game 1 card crypto peer S.S.S.S
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  outside_map interface card crypto outside

  tunnel-group S.S.S.S type ipsec-l2l
  IPSec-attributes tunnel-group S.S.S.S
  pre-shared key *.

  =========================================================================
  I'm Tournai on icmp trace debugging on both firewalls and could see the traffic arriving at the inside2 interface, but never return to FWa.

  Ping Successul FWa inside the interface on FWb

  FWa # ping 192.168.20.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.1, time-out is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.1 ID = 32068 seq = 23510 len = 72
  ! ICMP echo reply to 192.168.20.1 in outside-interface ID = 32068 seq = 23510 len = 72
  ....

  FWb #.
  Echo ICMP of S.S.S.S to 192.168.20.1 ID request = 32068 seq = 23510 len = 72
  ICMP echo reply 192.168.20.1 S.S.S.S ID = 32068 seq = 23510 len = 72
  ==============================================================================
  Successful ping of Fwa on a host connected to the inside interface on FWb

  FWa # ping 192.168.20.15
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.20.15, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ! ICMP echo reply to 192.168.20.15 in outside-interface ID = seq 50862 = 18608 len = 72
  ...

  FWb #.
  Inside outside:S.S.S.S ICMP echo request: 192.168.20.15 ID = seq 50862 = 18608 len = 72
  ICMP echo reply to Interior: 192.168.20.15 outside:S.S.S.S ID = seq 50862 = 18608 len = 72

  ===========================
  Unsuccessful ping of FWa to inside2 on FWb interface

  FWa # ping 10.52.100.10
  Send 5, echoes ICMP 100 bytes to 10.52.100.10, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ? Echo request ICMP from outside-interface to 10.52.100.10 ID = 19752 seq = 63173 len = 72
  ...

  FWb #.
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  10.52.100.10 ID of S.S.S.S ICMP echo request = 19752 seq = 63173 len = 72
  ....

  ==================================================================================

  Unsuccessful ping of Fwa to a host of related UI inside2 on FWb

  FWa # ping 10.52.100.1
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 10.52.100.1, wait time is 2 seconds:
  Echo request ICMP from outside-interface to 10.52.100.1 ID = 11842 seq = 15799 len = 72

  FWb #.
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72
  Echo request ICMP outside:S.S.S.S to inside2:10.52.100.1 ID = 11842 seq = 15799 len = 72

  =======================

  Thank you

  Hi odelaporte2,

  Is very probably the "access management" command is not applied in the second inside, only inside primary (see the race management) which will confirm.

  This command can be applied to an interface at a time, for example, if the law is now applied to the inside, it can not be applied to the inside2 at the same time.

  It may be useful

  -Randy-

• ASA 5512 Anyconnect VPN cannot connect inside the network 9.1 x

  Hello

  I'm new to ASA, can I please help with this. I managed to connect to the vpn through the mobility cisco anyconnect client, but I am unable to connect to the Internet. the allocated ip address was 172.16.1.60 and it seems OK, I thought my acl and nat is configured to allow and translate the given vpn ip pool but I'm not able to ping anything on the inside.

  If anyone can share some light... There's got to be something escapes me...

  Here's my sh run

  Thank you

  Raul

  -------------------------------------------------------------------------------

  DLSYD - ASA # sh run

  : Saved
  :
  ASA 9.1 Version 2
  !
  hostname DLSYD - ASA
  domain delo.local
  activate the encrypted password of UszxwHyGcg.e6o4z
  names of
  mask 172.16.1.60 - 172.16.1.70 255.255.255.0 IP local pool DLVPN_Pool
  !
  interface GigabitEthernet0/0
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/1
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/2
  Post description
  10 speed
  full duplex
  nameif Ext
  security-level 0
  IP 125.255.160.54 255.255.255.252
  !
  interface GigabitEthernet0/3
  Description Int
  10 speed
  full duplex
  nameif Int
  security-level 100
  IP 192.168.255.2 255.255.255.252
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  boot system Disk0: / asa912-smp - k8.bin
  passive FTP mode
  clock timezone IS 10
  clock daylight saving time EDT recurring last Sun Oct 02:00 last Sun Mar 03:00
  DNS lookup field inside
  DNS domain-lookup Int
  DNS server-group DefaultDNS
  192.168.1.90 server name
  192.168.1.202 server name
  domain delo.local
  permit same-security-traffic intra-interface
  network dlau40 object
  Home 192.168.1.209
  network dlausyd02 object
  host 192.168.1.202
  network of the object 192.168.1.42
  host 192.168.1.42
  dlau-utm network object
  host 192.168.1.50
  network dlauxa6 object
  Home 192.168.1.62
  network of the 192.168.1.93 object
  host 192.168.1.93
  network dlau-ftp01 object
  Home 192.168.1.112
  dlau-dlau-ftp01 network object
  network dlvpn_network object
  subnet 172.16.1.0 255.255.255.0
  the object-group Good-ICMP ICMP-type
  echo ICMP-object
  response to echo ICMP-object
  ICMP-object has exceeded the time
  Object-ICMP traceroute
  ICMP-unreachable object
  DLVPN_STAcl list standard access allowed 192.168.0.0 255.255.0.0
  Standard access list DLVPN_STAcl allow 196.1.1.0 255.255.255.0
  DLVPN_STAcl list standard access allowed 126.0.0.0 255.255.0.0
  Ext_access_in access list extended icmp permitted any object-group Good-ICMP
  Ext_access_in list extended access permitted tcp dlau-ftp01 eq ftp objects
  Ext_access_in list extended access permit tcp any object dlausyd02 eq https
  Ext_access_in list extended access permit tcp any object dlau-utm eq smtp
  Ext_access_in list extended access permit tcp any object dlauxa6 eq 444
  Ext_access_in access-list extended permitted ip object annete-home everything
  pager lines 24
  Enable logging
  asdm of logging of information
  MTU 1500 Ext
  MTU 1500 Int
  management of MTU 1500
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 713.bin
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (Int, Ext) static source any any destination static dlvpn_network dlvpn_network non-proxy-arp
  !
  network dlausyd02 object
  NAT (Int, Ext) interface static tcp https https service
  dlau-utm network object
  NAT (Int, Ext) interface static tcp smtp smtp service
  network dlauxa6 object
  NAT (Int, Ext) interface static tcp 444 444 service
  network dlau-ftp01 object
  NAT (Int, Ext) interface static tcp ftp ftp service
  Access-group Ext_access_in in Ext interface
  Route Ext 0.0.0.0 0.0.0.0 125.255.160.53 1
  Route Int 192.168.0.0 255.255.0.0 192.168.255.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  AAA authentication enable LOCAL console
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  LOCAL AAA authentication serial console
  the ssh LOCAL console AAA authentication
  http server enable 44310
  http server idle-timeout 30
  http 192.168.0.0 255.255.0.0 Int
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec pmtu aging infinite - the security association
  trustpool crypto ca policy
  Telnet 192.168.1.0 255.255.255.0 management
  Telnet timeout 30
  SSH 192.168.0.0 255.255.0.0 Int
  SSH timeout 30
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  No ipv6-vpn-addr-assign aaa
  no local ipv6-vpn-addr-assign
  management of 192.168.1.2 - dhcpd address 192.168.1.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  NTP server 61.8.0.89 prefer external source
  SSL encryption rc4-aes128-sha1 aes256-3des-sha1 sha1 sha1
  WebVPN
  port 44320
  allow outside
  Select Ext
  AnyConnect essentials
  AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_DLVPN group strategy
  attributes of Group Policy GroupPolicy_DLVPN
  WINS server no
  value of server DNS 192.168.1.90 192.168.1.202
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DLVPN_STAcl
  delonghi.local value by default-field
  WebVPN
  AnyConnect Dungeon-Installer installed
  time to generate a new key 30 AnyConnect ssl
  AnyConnect ssl generate a new method ssl key
  AnyConnect ask flawless anyconnect
  encrypted vendor_ipfx pb6/6ZHhaPgDKSHn password username
  vendor_pacnet mIHuYi1jcf9OqVN9 encrypted password username
  username admin password encrypted tFU2y7Uo15ahFyt4
  type tunnel-group DLVPN remote access
  attributes global-tunnel-group DLVPN
  address pool DLVPN_Pool
  Group Policy - by default-GroupPolicy_DLVPN
  tunnel-group DLVPN webvpn-attributes
  enable DLVPN group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the netbios
  Review the ip options
  inspect the ftp
  inspect the tftp
  !
  global service-policy global_policy
  SMTPS
  Server 192.168.1.50
  Group Policy - by default-DfltGrpPolicy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:67aa840d5cfff989bc045172b2d06212
  : end
  DLSYD - ASA #.

  Hello

  Add just to be sure, the following configurations related to ICMP traffic

  Policy-map global_policy
  class inspection_default
  inspect the icmp
  inspect the icmp error

  Your NAT0 configurations for traffic between LAN and VPN users seem to. Your Split Tunnel ACL seems fine too because it has included 192.168.0.0/16. I don't know what are the other.

  I wonder if this is a test installation since you don't seem to have a dynamic PAT configured for your local network at all. Just a few static PAT and the NAT0 for VPN configurations. If it is a test configuration yet then confirmed that the device behind the ASA in the internal network has a default route pointing to the ASAs interface and if so is it properly configured?

  Can you same ICMP the directly behind the ASA which is the gateway to LANs?

  If you want to try ICMP interface internal to the VPN ASA then you can add this command and then try ICMP to the internal interface of the ASA

  Int Management-access

  As the post is a little confusing in the sense that the subject talk on the traffic doesn't work not internal to the network, while the message mentions the traffic to the Internet? I guess you meant only traffic to the local network because you use Split Tunnel VPN, which means that Internet traffic should use the VPN local Internet users while traffic to the networks specified in the ACL Tunnel Split list should be sent to the VPN.

  -Jouni

• Cisco ASA 5505 VPN L2TP cannot access the internal network

  Hello

  I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.

  Can you jhelp me to find the problem?

  I have Cisco ASA:

  within the network - 192.168.1.0

  VPN - 192.168.168.0 network

  I have the router to 192.168.1.2 and I cannot ping or access this router.

  Here is my config:

  ASA Version 8.4 (3)

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 198.X.X.A 255.255.255.248

  !

  passive FTP mode

  permit same-security-traffic intra-interface

  the net-all purpose network

  subnet 0.0.0.0 0.0.0.0

  network vpn_local object

  192.168.168.0 subnet 255.255.255.0

  network inside_nw object

  subnet 192.168.1.0 255.255.255.0

  outside_access_in list extended access permit icmp any any echo response

  outside_access_in list extended access deny ip any any newspaper

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  IP local pool sales_addresses 192.168.168.1 - 192.168.168.254

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT dynamic interface of net-all source (indoor, outdoor)

  NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local

  NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search

  !

  network vpn_local object

  dynamic NAT interface (outdoors, outdoor)

  network inside_nw object

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  AAA authentication enable LOCAL console

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac

  transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode

  Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1

  card crypto 20-isakmp ipsec vpn Dynamics dyno

  vpn outside crypto map interface

  Crypto isakmp nat-traversal 3600

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 30

  Console timeout 0

  management-access inside

  dhcpd address 192.168.1.5 - 192.168.1.132 inside

  dhcpd dns 75.75.75.75 76.76.76.76 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal sales_policy group policy

  attributes of the strategy of group sales_policy

  Server DNS 75.75.75.75 value 76.76.76.76

  Protocol-tunnel-VPN l2tp ipsec

  user name-

  user name-

  attributes global-tunnel-group DefaultRAGroup

  address sales_addresses pool

  Group Policy - by default-sales_policy

  IPSec-attributes tunnel-group DefaultRAGroup

  IKEv1 pre-shared-key *.

  tunnel-group DefaultRAGroup ppp-attributes

  ms-chap-v2 authentication

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13

  : end

  Thanks for your help.

  You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  --

  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• ASA 5510 VPN multiple tunnels through different interfaces

  Is it possible to create VPN tunnels on more than one interface to an ASA (specifically 5510 with 8.4), or I'm doing the impossible?

  We have 2 public interfaces on our ASA connected to 2 different suppliers.

  We must work L2L tunnels of the SAA for remote offices through the interface that is our ISP 'primary' and also used as our default gateway for internet traffic.

  We are trying to install a remote office use our secondary connection for its tunnel (office of high traffic we would prefer separate away from the rest of our internet and VPN traffic).

  I can create the tunnel with the ACL appropriate for traffic tunnel, card crypto, etc., put in place a static route to force ASA to use the secondary interface for traffic destined for the public of the remote gateway IP address, and when I finished, traffic initiated by the remote site will cause the tunnel to negotiate and find - I can see the tunnel in Show crypto ikev1 his as L2L answering machine MM_ACTIVE , Show ipsec his with the right destination and correct traffic local or remote identities for interesting, but the ASA local never tries to send traffic through the tunnel.  If I use tracers of package, it never shows a VPN that is involved in the trafficking of the headquarters in the remote desktop, as if the SAA is not seeing this as for the corresponding VPN tunnel traffic.

  If I take the exact same access and crypo card statements list and change them to use the primary ISP connection (and, of course, change the remote desktop IP connects to), then the connection works as expected.

  What Miss me?

  Here is a sample of the VPN configuration: (PUBLIC_B is our second ISP link, 192.168.0.0/23 is MainOffice 192.168.3.0/24 is FieldOffice)

  permit access list range 192.168.0.0 PUBLIC_B_map 255.255.254.0 192.168.3.0 255.255.255.0

  NAT (Inside, PUBLIC_B) static source MainOffice MainOffice static FieldOffice FieldOffice

  card crypto PUBLIC_B_map 10 corresponds to the address PUBLIC_B_map

  card crypto PUBLIC_B_map 10 set counterpart x.x.x.x

  card crypto PUBLIC_B_map 10 set transform-set ESP-3DES-SHA ikev1

  PUBLIC_B_map PUBLIC_B crypto map interface

  tunnel-group x.x.x.x type ipsec-l2l

  tunnel-group ipsec-attributes x.x.x.x

  IKEv1 pre-shared-key *.

  Route PUBLIC_B x.x.x.32 255.255.255.224 y.y.y.y 1

  If I take this same exact configuration and change it to use PUBLIC (our primary connection) instead of PUBLIC_B, remove the instruction PUBLIC_B route and change the desktop to point to the ip address of the PUBLIC, then everything works, so my access list and crypto map statements must be correct.

  What I don't understand is why the ASA Head Office does not seem to recognize interesting for the tunnel traffic when the tunnel is for the second ISP connection, but works when it is intended for the main ISP.  There is no problem of connectivity with the ISP Internet B - as mentioned previously, the tunnel will come and negotiate properly when traffic is started from the desktop, but the traffic of main office is never sent to the bottom of the tunnel - it's as if the ASA does not think that traffic of 192.168.0.x to 192.168.3.x should pass through the VPN.

  Any ideas?

  Hello

  I think your problem is that there is no route for the actual remote network behind the VPN L2L through ISP B connection

  You could try adding add the following configuration

  card crypto PUBLIC_B_map 10 the value reverse-road

  This should automatically add a static route for all remote networks that are configured in the ACL Crypto, through the interface/link-ISP B.

  If this does not work, you can try to manually add a static route to the ISP B link/interface for all remote networks VPN L2L in question, and then try again.

  The route to the remote VPN peer through the ISP B does not to my knowledge.

  I would like to know if it works for you.

  It may be useful

  -Jouni

• VPN via a different interface of the "outside" interface

  I have two ASA5510 each with two external interfaces, we're connecting to an ISP for the Internet and the other connects to an MPLS network. And I have the LAN on the interface of "inside".

  In my lab, I have each external interface connected to a separate router, and the router connects to an another ASA5510 who will be at the other end of the VPN.

  Enough of this scheme:

  LAN
  |
  |
  |
  |
  ASA--------------
  | defaultroute | specificroute
  |                       |
  |                       |
  |                       |
  Router router
  |                       |
  |                       |
  |                       |
  | defaultroute | specificroute
  ASA--------------
  |
  |
  |
  |
  LAN

  I bring a VPN on the interface either as long as I get the interface default route (0.0.0.0 0.0.0.0). So it seems that the configuration is correct. But given that I have only one default route, I can never raise the second VPN.

  I have a static route pointing to the peer through the correct interface and next hop for the second VPN IP and can ping and traceroute to the public address just fine so routing is correct, but...

  whenever I ping from LAN to LAN to make appear the second VPN log just shows it as an attempt to create a translation.

  It is as if it does not have it as "interesting traffic" but as a regular traffic to the Internet.

  Any thoughts on this?

  Thanks in advance.

  Hello

  If you need to configure the tunnel interface on the ASA (ISP or MPLS)... While you apply the card encryption on both interfaces.

  Then... routing will take care through which interface to negotiate the tunnel.

  Say that the remote site has this configuration:

  Public IP = 1.1.1.1

  Remote LAN = 10.1.1.0/24

  You should have this:

  Route ISP 1.1.1.1 255.255.255.255 NEXT_HOP 10

  Route MPLS 1.1.1.1 NEXT_HOP 20 255.255.255.255

  Route ISP 10.1.1.0 255.255.255.0 NEXT_HOP 10

  Route MPLS 10.1.1.0 255.255.255.0 NEXT_HOP 20

  In addition, configure IP SLA.

  Whenever the ISP interface goes down, the ASA will attempt to negotiate the tunnel via the MPLS interface (because is one that can be used to reach the other site).

  Federico.

• Client VPN cannot get inside the network

  The VPN client connects to the 2600 on the serial interface, should be able to get to the 10.10.0.0 network beyond 192.168.1.14. The customer ping responds failure of external serial interface address.

  If you still have problems... can you check that there is a static route BOF 192.168.100.0/24 on router 192.168.1.14 and initiate a tracert to a host on the network of 10.10.x.x at 192.168.100.7 and see where it goes... your tests show that the VPN client knows how to get to this subnet, but it seems that there is a problem of routing between 10.X.X.X going 192.168.100.0

  I hope that helps!

• URGENT! Two physical network with two subnets completely - no bridges - interface cannot connect both

  This is my urgent problem:

  I have a physical machine with two physical network interfaces. I have a VMWARE player and a virtual machine that must use cards on two different subnets, a public directly to the router and an intranet within the company.

  How can I just say a net card to go on this submarine and the other on the public void?  Go crazy. Help, please.

  Thank you

  P.

  Use the virtual network editor VMware Player, create an additional bridged VMnet and bind each bridged to a different physical network... card VMnet on a virtual machine, create a virtual network adapter on each subnet and bind each virtual network adapter to an another VMnet jumpered.

  For additional help with virtual network Editor, check this KB: VMware KB: using the VMware Workstation virtual network editor