Physics-Tour virtual and physical new installation?

Similar Questions

• My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files. How do I take the old bookmarks if there is no backup?

  My PC crashed. Restored on a new record and a new installation of FireFox. I can still access all the files on the old drive. How do I take the old bookmarks if no backup exists, or has been completed? Does not save bookmarks of FireFox auto? If, then what is the file name and where is normally stored by FireFox?

  In fact, it can be easier...

  If you have the old drive connected as, say, drive E, go to:

  E:\Users\username
  

  Then click in the address bar and paste it after this and press ENTER to open it:

  \AppData\Roaming\Mozilla\Firefox\Profiles
  

  Normally, you have only one file, which has a random string followed by "default." In this case, click on this file and find the subfolder bookmarkbackups.

  If you find multiple profile folders, look inside to find the most recently updated backups.

  To restore the backup files, see: restore bookmarks from a backup or move them to another computer

• 2504 and 3802i new installation does not

  Hello

  I installed a new WLC 2504 and new APs 3802i, however the APs are not fully functional. They keep cycling the RED/GREEN/BLUE LED, which I don't see in the troubleshooting guide. WLC running 8.3.102.0, APs connect, take a license, but none of the radios come and he can't even see 2.4 Ghz I installed 5508 s front and WiSMs and did not have this problem with 1252/1142/2602 APs. Don't know what the hell miss me, and hoping that the group can help out me. TAC was told that they do not receive enough power that is a scripted response. Watch controller PoE as PoE/power. I had to install a device on the controllers pack? I went from 8.1.115.0 (plant) right to 8.3.102.0 because the 115 does not support the 3802 s.

  Summary of access points

  Total   Upward   Down   802.11A/n/AC radio   In detail 802.11b/g/n Radios   In detail Dual-Band radio   In detail All APs   In detail

  3800 require PoE + (802.3at) to operate. Because you got a line card PoE will not work correctly. See below for the required power for 3800 series.

  http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-3/b_cisco_aironet_series_2800_3800_access_point_deployment_guide/b_cisco_aironet_series_2800_3800_access_point_deployment_guide_chapter_01010.html

  Not sure what you want for a console output, so I posted AP run-config and show log:

  If you have a complete when console output AP trying to register, we can see exactly the problem at hand. Even with the limited log messages you can see is the negotiation of PoE has failed. If you have any PoE switch + you can confirm a 3802 works without any problem. In this way, you can confirm the problem with PoE HTH Rasika * Pls note all useful responses *.

• Will the memory and the new installation of windows 7 to get rid of any exploit hacker

  I bought a new package ultimate single user official windows 7 on CD and I replaced it my memory stick with 4 brand new that I was also getting faulty memory diagnostic.

  How can I be sure that it has removed the activation of pirates feat.
  Also the person who has downloaded the 'bad' windows 7 would be initially he have known that it was a forgery and also be responsible for the pirate feat.
  If this last question is too serious to answer on this forum, then appreciate where I order it.

  I would check whether if you bought fully compatible memory, for example

  http://www.Corsair.com/us/learn_n_explore/

  A clean install of victory would destroy everything on the pc, when you start on the MS cd, early in the process of removing all the scores found, before continuing.

  If you have bad memory win7 cannot install properly

• New installation OS on Equium A100

  Hello world

  I'm new to this forum, so I'll appreciate all the help I can get.

  I have a Toshiba Satellite A100 - 02L, model PSAAQE-00P00KAV, with operating system Vista Home Premium 32 bit since July 2007. In October 2007, I performed an upgrade to Adobe Reader and things started to go wrong.
  I did a reinstall of my recovery DVDs, and things are almost back to normal. The pc stopped recognizing my web cam and I had to buy a new, but above all it worked well. The mistake I made when you reinstall - I changed 2 partitions-2 physical hard drives into one. However, over time that my laptop has started to hurt behave again, especially after what he installed vista pack 2, including not having the audio drivers or see a multimedia disk of a sony-ericsson phone, I bought a few weeks ago.

  So, I decided to reinstall once again, hoping to fix all the wrongs. I've done this procedure a couple of times, although I'm not a very technical person. I started the pc with the drive, I pressed F12 and select reboot from cd/dvd, but he didn't perform the clean installation, I expected, just something a repair, I think. The screen where you choose the partitions came not upward, and one where you put your Vista key and it took about 45 minutes to do all that.

  So I tried again, hoping that this time it will work. Cannot do and after the third time he went into ms - back like screen, telling me that windows has not to load, a step which gave unfortunately I did not write down and said there is a corrupted core. I was very upset, as you can imagine, so I left it alone for a few hours, then I tried to restart the computer again. Fortunately, this time he started windows, but there are always pieces that does not meet the standards. So, I was hoping that maybe someone can give me some advice on how to do a clean install and repartition my HARD drive.

  I tried to look on the Web site for support, but I can't find my model, there is only an A100-027, even when I tried the model No, it was not me with the auto detect software.

  I know this is a very long story, but I hope that the details will help. Really looking forward for your help.
  Micky.

  > So, I decided to reinstall once again, hoping to fix all the wrongs. I've done this procedure a couple of times, although I'm not a very technical person. I started the pc with the drive, I pressed F12 and select reboot from cd/dvd, but he didn't perform the clean installation, I expected, just something a repair, I think. The screen where you choose the partitions came not upward, and one where you put your Vista key and it took about 45 minutes to do all that.

  You mean on the Toshiba Recovery DVD or disk Microsoft Vista and the new installation?

  Using the Toshiba recovery disc will not ask you to choose the partition, nor to put keys series! The image of Toshiba which is placed on the Toshiba Recovery disk is already enabled and the serial number; key is not required!

  Generally, the use of the recovery disk should format the HARD drive and you could reinstall the whole OS again maybe there is something wrong with the HARD drive may be
  I think this should be verified

• going from 3.5 to 4 with a new installation of vcenter Server

  Hey

  We want to use a new server and a new installation of virtual center 4 to connect to our existing ESX 3.5 servers. am I right in thinking I can disable DRS and HA, then simply disconnect them from the old server and connect them to the new server? (I'm not worried about performance data at all)

  then we will upgrade the tools of virtual machine on virtual machines and then the real hosts go to 4.

  its ok?

  see you soon

  Here is the information that I have followed the vCenter of moving to a new server. Worked like a charm. Let me know if you need anything that anyone else.

  http://KB.VMware.com/kb/5850444

• Cannot open/access media importing & NTI Shadow on new installation NMH300

  Hello

  Just bought and filled new installation on NMH300 using Windows 7/64 bit PC.

  Got a notification of successful after the installation and proceeded to a 2nd disk Raid-1 facility.

  As my 2nd drive is synchronized to the top, I tried to access the importing media both NTI Shadow by statement in Chapter 2 of the user manual.

  However, I could not open/run either of these applications.  Nothing seems to happen when I left clicked that icons, when I clicked on the right button of the mouse on the icons, did not get the menu shown in the manual (Open, Goto online media, etc.).   I got the standard Windows menu display: open, troubleshooting, cut, copy, properties, etc.

  I tried to re - run the installer multiple times, by clicking on connect computer manual one-way, but no change and got the same results as described above.

  Firmware ver: 3.18.4

  Browser ver software: 1.7.41

  Help, please!  All of the recommended suggestions would be greatly appreciated.

  Hi BHK808,

  You right click on a shortcut or you right-click the media importer icon in the system tray? With respect to NTI shadow try going to program files, then in the shadow of nti folder and try to start the application by using the application nti shadow file.

• Restore backup files after the new installation of Vista

  I recently had to replace my main hard drive as it has completely crashed and burned.  Fortunately, I thought, I had been diligently backing up to an external hard drive.   So after replaced by a fresh hard drive and a new installation of Vista, I thought I could just restore these files from backup... but no luck.  New Vista does not recognize the old Vista backup.  And it will allow me to migrate these files in any usable fashion.  Is it possible for me to get the new Vista installation to access these backups from the previous installation of Vista?

  Hi Allisonerik,

  (1) what happens when you try to restore?

  (2) you get an error message?

  (3) was it a file, or a backup system image?

  I want to clarify if your backup media (external hard drive) is recognizing in Windows.

  Method 1: Put the computer to boot and then check to see if you can restore

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 2: Check your external hard drive to find errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  See the links below

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Restore files from a backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the difference between virtual and physical CPU cores?

  I understand one is virtual and the other is physical. My question is, if I run a physical system with two physical processors quadricoeurs, which would be an equivalent virtual machine configuration, assuming I use VMware on a dual CPU quad-core server?

  Would be - this 4 x vCPU or 8?

  Run perfmon to see what treatment power is actually using a period reasonable period (x days)...

  You generally assign virtual servers less vCPU than you should in physical cores before conversion, or building a VM... Where you had processors dual core quad now, the reality of things would be that it is really only with the power equivalent of two hearts (crete)...

  Beauty to go with a virtual server is that you can assign a n vCPU VM start (for example, two for a multi-thread aware or SMP, application server) and add later if the performance requires it. The majority of the VMS is built with one vCPU to start, unless you KNOW (beyond doubt) that demand on the server will need vCPU more and the software running in the VM actually fully benefit the granting of vCPU more to her... I have, in general, set the alarms I know where the application of the CPU is abnormally high (or above the normal threshold) on VM (email is sent)... This allows me to monitor the requests to the server and adjust it accordingly.

  You can also grant a greater share value VM for resources, so it has a higher priority than the other virtual machines when he needs these resources.

  Of course, there is much to be said for having a host server (for ESX/ESXi) who has enough power too... These days, I wouldn't recommend becomes a new server (for a production environment) with anything less than the Interior, dual Xeon 5620... Larger environments might require higher speed Xeon 56xx or maybe even 65xx or popular 75xx Xeon series with more cores per socket... This is a capacity adequate session/run planning would have come into play...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• Documentation for the conversion of virtual and physical memory

  Are there any decent documentation for the conversion of virtual and physical memory?

  Any help would be appreciated.

  Yes I do, I'll send you my notes!

  Matthew

  Kaizen!

• New error message after upgrading the hard drive and operating system installation

  Hello

  I replaced the hard drive and was able to install the CD recovery successfully. I replaced a 200 GB with a 250 GB. Everything booted up ok, however, I made up the internet and has been advised that I am successfully connected to the internet, my laptop shuts down: and restarted with a Long written below in bold error message. The Message reads:

  "A problem has been detected and windows has shut down to prevent damage to your computer.

  IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follo as follows:

  Check that a new hardware or software is properly installed. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

  Technical information:

  STOP: 0X0000000A (0X00000002, 0X00000001, 0 X 00000064, 0X81FA4DAE)

  Data collection for the crashdump...

  Initialization of the disk for the crashdump...

  Dump of physical memory start disk: 100

  Complete physical memory dump.

  For more assistance, contact your system administrator or technical support group.

  The error message was dispelled that I changed the memory of 64-to-5300. Then I did about 5 days of windows updates and now my laptop is up and running thank you very much!

• New installation of Xubuntu w / Firefox on my PC. Everything works VERY slowly, even typing and cursor movement. Is - fixable?

  With this new installation of Xubuntu (which is supposed to be quick enough) with Firefox included, all transactions processed through the browser are incredibly slow: typing, go to other pages or Web sites; move the cursor is painfully slow, and sticky with time delayed reaction and excessive results. I have the maximum encryption and security; This could be the problem? Note: I noticed that type in this window is normal...? E-mail is correct, also.

  Thank you very much
  Bob

  Glad your problem is solved itself, and I see that you have also your problem another (1012424/questions/1012424). Don't forget to update Firefox, it should be 31 Firefox now or if Xubuntu is a bit behind perhaps still Fx30 but certainly not Fx28.

  Be aware that you will see big changes in Firefox

  • Learn more about the design of the new Firefox version 29
  • https://www.Mozilla.org/en-us/Firefox/tour/

  You mentioned

  why would they include an unsupported version of Firefox in the same package with the newest version of an operating system?
  

  Ubuntu and Xubuntu major versions come out every six months. Firefox updates every six weeks. Probably the first thing to do after you have installed a new version of X / Ubuntu is updated the software, also immediately before the upgrade to the next Xubuntu.

  Versions of Firefox & Ubuntu/Xubuntu

  I use Ubuntu 12.04 LTS for most. 14.04 is also LTS, so you have to stay on that instead of update in due course to 14.10

  • Pretty graph http://en.wikipedia.org/wiki/Ubuntu_versions#Table_of_versions

  I use their distro Canon of construction of Firefox since their deposit of Aurora. Who is behind Mozilla versions datewise (I also installed mozilla versions), but it uses the package manager, so no need for manual updates of Firefox. You probably don't want or need to do that, but if you do not want to install this as a browser extra is available for 12.04 & 14.04 of

  • https://Launchpad.NET/~Ubuntu-Mozilla-daily/+archive/Ubuntu/Firefox-Aurora
  • If you are interested by sets it Mozilla see
    Installing Firefox on Linux
    & https://help.ubuntu.com/community/FirefoxNewVersion

  Synaptic (graphical APT front-end server) package manager is therefore longer in default distributions of Ubuntu/Xubuntu, you could add Synaptic (included in gDebi in Xubuntu 12.04) otherwise use the "Software Center" to ensure that everything is kept up-to-date

  • Software Center http://askubuntu.com/questions/4983/what-are-ppas-and-how-do-i-use-them/40351#40351
    • https://sites.Google.com/site/easylinuxtipsproject/first-Xubuntu#TOC-apply-all-available-updates
  • Https://help.ubuntu.com/community/SynapticHowto Synaptic Package Manager

  I know that some earlier versions of Ubuntu to (less LTS versions) the canonical versions of Firefox did not update, but I expect the center of software or package manager to be able to keep Firefox reasonably aware and do not drop by more than one version.

• Satellite A100-847: after the new Virtual Sound Setup XP installation reports problem

  Hello

  I have a big problem with Toshiba Virtual Sound after installing Windows. After new installation Windows XP (Orginal CD not Toshiba Recovery Disk) and drivers (latest) the problem of the Virtual Sound Setup Report: is not possible to install Virtual Sound because not present this material!

  After you have reinstalled Windows, everything was OK (with Toshiba Recovery Disk). Thank you

  Hello

  Can I ask you what phone you have?

  You said something about installing all the drivers (most recent).
  Do you install all the drivers needed and just?
  The laptop runs correctly after installing the Toshiba Recovery CD because this CD contains all the drivers and all the important tools
  It occurs to me that you have not installed the drivers required

• Why FF act as if each start is a new installation and hang on to old tabs?

  I updated Firefox to version 8.0.1 to 9.0.1 about an hour ago, and it has been wrong since. I suspect it's a matter of preference, but I'm not sure.

  Every time I have start FF (or restart), he seems to think that this is the first time, it was run / installed. It checks the compatibility of each extension, once again.

  It also opens a new page in "Welcome to Firefox hooray... "as if it were a new installation. Each time, it adds a new tab with this message. Address, it opens:

  http://www.Mozilla.org/en-us/Firefox/9.0.1/whatsnew/

  In addition, it does not follow my load on startup home page settings. It sticks with the old tab rather than that it should open.

  I've already gone through and tried to use the information on the pages of the forum helps:

  https://support.Mozilla.org/en-us/KB/Firefox%20Has%20just%20updated%20tab%20shows%20each%20time%20You%20start%20firefox?s=page+opens+on+startup & r = 8 & As = s

  and

  https://support.Mozilla.org/en-us/KB/preferences%20are%20not%20saved

  They do not seem to have helped matters. Of course, I don't know exactly which lines in the Prefs.js file should be deleted, but I took:

  user_pref ("browser.tabs.closeWindowWithLastTab", false);
  user_pref ("browser.taskbar.lastgroupid", "Mozilla.Firefox.8.0.1");

  ... and the problems persist. I don't want to go lift more information that I do not understand. Thanks for any help.

  Oh, and I made sure there is no running session restore feature, AFAIK (including TabMixPlus). My settings of homepage in the menu Options are correct.

  To summarize:

  (1) stop FF to think every start/restart is a new installation.
  (2) get my home page to load to the correct address.

  I don't know what the problem with the old profile, and in this case, it is easier to try a new profile, that spend a lot of time to devote to what is wrong. It could be a prefs.js file or a problem with the registry extensions file or a problem with the files sessionstore or something else.

• I'd appreciate it really any assitance on this, I can't save my favorites due to a failure of the system. I can access the drive crashed trhe data. Do my resident Favorites in a file that I can copy and then replace in a new installation, if so, where is

  Windows broke down and I need to reinstall Vista. So I can make a backup of my favorites, but I guess that there is a file somewhere on my crashed disk that bears this detail. If so, can I copy this file and replace in my new installation of firefox. If this file exists, I would like to know the name of the file that I need to copy and that I could find it in the directory.

  The anonymous gives path is for Vista not XP.

  The "places.sqlite" file is the file that contains your bookmarks and history. It is located in your profile folder.

  See:
  http://support.Mozilla.com/en-us/KB/profiles#How_to_find_your_profile
  Display the hidden files and folders

  In XP, the path is usually:
  C:\Documents and Settings\UserName\Application Data\Mozilla\Firefox\Profiles\xxxxxxxx.default
  ("xxxxxxxx" is a unique alphanumeric identifier)

  When you copy data from your OLD profile to your NEW profile, copy individual FILES (some require more than 1 FILE). DO NOT copy the entire OLD PROFILE folder; It will not work.

  See: recovery of data from an old profile

  Other topics: ~ ~ Red: you have installed the plug-ins with known security issues. You must update them immediately. ~ ~

  Java Update: version 1.4.2 (~ ~ Red: very old ~ ~); current version 1.6.0.20 (important update 15/04/2010)
  (Firefox 3.6 and above requires Java 1.6.0.10 and above; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
  (Windows users: do the update manually, very easy.)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Java Update
  Do the update with Firefox closed.

  Install/update Adobe Flash Player for Firefox: your version 10.0 r45; current version 10.1 r53 (Security important update 2010-06-10)
  Check your version here: http://www.mozilla.com/en-US/plugincheck/
  See: Flash update
  -use Firefox to download and SAVE to your hard drive (save to the desktop for easy access)
  -the release of Firefox (file > exit)
  -Make sure that Firefox is completely closed (Ctrl + Alt + Delete, choose Task Manager, click the processes tab, if "firefox.exe" is on the list, made a "firefox.exe" right-click and choose end process, close the Task Manager window)
  -Double-click the Adobe Flash Installer, you just download to install/update Adobe Flash
  -When Flash is installed, start Firefox and test the installation of Flash here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507 & sliceId = 1

  • NOTE: under Vista and Windows 7 you may need to run the installer of plugin as an administrator by starting the installation program via the context menu if you do not get a UAC ask permission to continue (that is, nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
  • NOTE for IE: Firefox and most other browsers use a Plugin. IE uses ActiveX of Flash version. To install/update IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash Setup.
  • See also: http://kb.mozillazine.org/Flash ~ ~ Red:AND~ ~ How to change options to add Adobe to the list of allowed sites