Pick-ups on my cable disk hard external are falling.

Similar Questions

• my computer starts shows windows xp then restarts around back and does not completely load. Disks hard my are dead? Can not even go in safe mode.

  I have sony vio computer of 8 years, os is xp. It was off and I have to restart and it started in a loop.  Starts booting and then display the "xp" logo and then the screen looks like it lights up then goes back to the start screen, then back to xp logo and it never loads to the bone.  can't go in safe mode or anything.

  Thanks for writing again for me.  This morning I used my f10 key and brought my computer back to original data.  It's all good now.
  Thank you once again.

  Hi falowme57,

  ·         You get the error message?

  ·         What happens when you try to start in safe mode?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Disconnect all external devices such as printer, scanner, etc.

  Method 2: Disable the option of automatic restart under advanced boot options.

  http://support.Microsoft.com/kb/307973

  Method 3: See the article.

  http://support.Microsoft.com/kb/314503

  Reply back with the results.

• drive hard external 'ice 2 TB minimus' impossibile installarlo. Application not compatibile.

  soothe a tutti.ho just cpmprato a disk hard external "ice 2 TB minimus" e non riesco an installarlo. Specifico: Hard disk viene Republic, entro nella cartella e relative vi sono tutti i file necessari... poi pero' launch when he set up... e blocca if not the installazione.ho fatto di rilevamento e problemi analysis after mid of programma non compatibile!... cosa posso fare? .. .grazie Gabriele

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

  Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)

  Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)

  If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto: (IT)

  Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link below: (Portuguese)

• Disk usage statistics are not available

  Trying to generate a report for Reporting and chargeback-> inventory on the HIGHER-UPS. But the disk usage statistics are not available

  Hi Eric,.

  Not sure why it's empty.  You can check with the support.

• Back up a disk hard PC network to an external drive using Time Machine?

  I use an old iMac to back up one external drive to another using SilverKeeper; the two elements are obsolete, but functional. It is the logic board died and I could buy a new iMac, but SilverKeeper does not work with the new OS. Can TimeMachine backup a specific folder to a network PC on another hard disk drive external? If not, I would: (1) set the old iMac or (2) buy a new one, but be forced to reconfigure the storage of data for TimeMachine can get.

  N ° Time Machine backs up only the locally connected readers. He cannot back up a network share.

• Second disk hard cable/accessory

  Hello world

  I have a HP ENVY laptop 17TS and want to add a SSD drive.  I see that there is an empty drive Bay.  Where can I find the cable/connector and associated kit disc?  I could not find on the HP.COM site.

  Thank you very much in advance,

  Dinesh

  Hello
  
  
  
  To add an SSD in your laptop. I have included the "HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC - Maintenance and Service of Guide". Disk hard page 48, it will give you references of different readers compatible with your system. Who is marked as hybrid are the HDD and SSD. Thus provides you with instructions on how to connect the SSD to the laptop.
  
  
  
  So, I have also included the document, "On Solid State Hard Drive. This has different bits of information, to the maintenance and verification of the different parts of the material.
  
  
  
  Please let me know if this helps, thanks.

• Question of installation disk hard satellite 4090

  I received a Satellite 4090, but there is no hard drive. Can someone tell me how to adapt it. I don't see anywhere on slot, so I guess that the case should be opened. Also are the same all drives hard toshiba.

  I've seen a lot on ebay, but they don't say what model they are intended.

  Hopeful Alan

  Toshiba Satellite 4030, 4060, 4080, 4090, 4100 series

  1. remove all cables.
  2 lower the cell next door.
  3. the HARD drive compartment on the side front right / laptop
  4. remove the 2 screws of the HDD bay cover and remove the cover.
  5 remove the 1 screw that secures the HARD drive in place.
  6. gently slide the HARD drive out of the compartment.
  7. slide the new hard drive into the hard drive compartment and replace the 1 screws to secure the HARD drive.
  8 replace the Bay covers and 2 step 4 HARD drive screws.
  9. replace all cables.

  Hope this helps, you can also try here for a disk hard http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=EU&highlightOption=15528&PR ODUCT_ID 5685 = & DISC_MODEL = 0 & tab = 1

  It might be better to get an external hard drive possible hard drives only I could find for this model were only 6.4 GB so you will not be able to upgrade to a larger h/d coz your laptop do not recognize, all if someone else might be able to answer this question better than me Good luck

• DV7-4280us - Bay of disk HARD 2nd vacuum has no visible connection to a 2nd HARD drive.

  My laptop Pavilion DV7 and previous DV8 had two bays for HARD drives, one of them wired to a hard drive, but not containing is not a hard disk at the time of purchase.  I expect the same thing when I ordered this Pavilion DV7-4280us, which is, I think, made in China, but I have not the same.  This one came without visible connectors for the hard drive, I had already bought to install into the empty Bay.  My Technical Support call made me advice to buy a disc kit hard (with caddy & connections) from HP, as if the receive connectors were available in the drive Bay HARD vacuum.  I didn't not agree because (and the next two paragraphs I added so that the well-intentioned forum members continue to give me the standard answer for laptops which actually have the usual connectors & waiting in the drive Bay HARD 2nd vacuum.  I appreciate the two forum members who have offered help so far, but there is no need to waste more based on my failure to clarify the problem):

  There is NO METAL NAKED INTO THE BAY VOID that COULD CONNECT a HARD disk.
        UNLESS A NEW CONNECTOR GOES TO THE MOTHERBOARD HARD DRIVE, IT IS USELESS FOR THIS COMPUTER.

  Each HARD drive connector I've seen only connects the HARD drive to a connector in the HARD drive Bay.
  

  The connector of the latter reaches the motherboard, and that the connector does not exist in this 2nd computer HARD disc Bay.
  

  Even if I could get a cable to connect a HARD drive to an unused connection & waiting on the M-Board, I can't M-Board.  M-Board is inside a barrier which could be called the bottom of the laptop - external surface of the portable computer.  (Battery and bays for HARD drives are outside the confines of the current computer, the value in their own hollow spaces in the bottom panel, with secondary coverage on the hollow spaces, i.e. the bays for HARD drives and storage media).  I looked for a way really open the casing and expose the M-Council connection for 2nd HARD drive (IF it exists); but I didn't know how to do it.  It is clear to me that this is not intended to be a facility run by the user. But I would if HP (or maybe even a 3rd party who made it) provided some good instructions.

  I'd like to think that HP did not make this change to the line DV7 laptops to double HARD drive, and that the Chinese manufacturer made the change without approval or even knowledge of the management of HP.  I want to believe that because he was, at best, a really stupid thing for HP to the customers who pay for the best HP can provide.

  So my questions are the following:

  1. The motherboard in this computer still has the ability to manage a 2nd hard drive?
  2. If 'NO', then HP would be willing to take over this very disappointing computer in Exchange to a DV7 which is equipped with HARD drive connectors available in the 2nd, empty, Bay?
  3. If 'YES', then
  4. HP or someone else would be willing to provide connectors, and instructions for me,
  5. OR install the missing connection to the drive for me, Bay
  6. While, in both cases 4 or 5, I can install a HARD drive in the Bay, empty 2nd drive reasonably, I expected when I ordered this computer?

  All my apologies and thanks to KaLin0908, who responded so quickly and helped me realize that my original description was not clear enough.  I hope that my changes to clarify the problem have not ruined the tone of my call.  I'm aiming for "clear and grateful."  If this revision reads as Loud or Yelling or abrasive or anything else bad, I'd appreciate any suggestions to improve it.

  I have the same computer.

  At first seems like you say but

  If you look carefully the second Bay of hd, you will see 4 small holes

  Those who are for the hard drive caddy, you can buy that and it's expensive

  You should also buy a hd cable, but be careful, there must be about 5 inches long

  The cable for 1 hard disk does not work

  One end goes on the hard drive and the other going to the MB. The connection is planned

  for the memory modules

  The kit costs about $ 45. If bought at hp and about 35 if purchased by another company

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&products_id=345

  This will give you an idea of where/how the screws connect to the caddy

  4. connect the hd to the caddy /ssd

  4. connect the housing inside the laptop

  http://www.dectrader.com/605415-001-new-HP-HDD-hardware-kit.html#.ULTmVNcew1w "

  Almost the same video

  http://www.YouTube.com/watch?v=EZgiX-pzdL8

• Office of Toshiba Canvio disk HARD 3.5 "3 to Win 7 backup error 0x8078002a

  I have just purchase a disk HARD 3.5 "3 TB canvio office

  Windows 7 backup and restore utility do not reach success any time, showing the 0x8078002a error.

  I have read and wasted enough time to notice that I will not be able to find the solution in the web.

  I bought this HARD disk as backup media for Windows 7 backup and restore utility, exclusively

  I need a solution.

  Thank you.

  Hello

  Are you able to create and save the backup on the internal HARD drive?
  Check it!

  The 0x8078002A error may occur because the physical 4 k. sector size I read that the utility Windows 7 backup and restore has some problems with readers supporting the logic of 4 K sector size.

  CIHI details:
  http://support.Microsoft.com/en-us/KB/2510009

  If you use a reader of logical sector of one size other than 512 bytes, System Windows image backup, and restore operations may fail, and you receive the following error message:
  + One of the backup files could not be created. +
  + Details: The request cannot be performed because of an i/o device error. +.
  + Error code: 0x8078002A +.

  If you use the drive external HARD as part of the Windows 7 backup and restore, you can buy a HARD drive supporting 512 bytes per physical sector

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• How to clone disk HARD of backup/restore for ideapad with pre-installed win8 and recovery button work?

  Hi all

  I recently bought a y510p ideapad. It came with pre-installed win8, and I have no recovery CD. I intend to play with linux on this laptop, but do not want to lose win8. So before I have potentially immediately reformat, I think to make a copy of clone of my HDD on an external USB drive. The general plan is like that,

  1. make a copy of mobile on external USB HARD drive

  2 mud with linux - and foolishly autour reformat the entire process

  3. have fed up with linux and want to return to windows

  4 copy of retrospective data from usb driver external HDD latop

  5 return to the comfort of win8

  With the help of this tool (clonezilla) will work in the above scenario?

  http://www.MakeUseOf.com/tag/free-advanced-hard-drive-cloning-solution-from-Clonezilla/

  If not, are there any other alternatives (free if all goes well) I could use?

  My intention with the backup, is that after that I have 'restore' things, "a key recovery" button should continue to work as before.

  -Abraham V.

  AbrahamV wrote:

  Hi all

  I recently bought a y510p ideapad. It came with pre-installed win8, and I have no recovery CD. I intend to play with linux on this laptop, but do not want to lose win8. So before I have potentially immediately reformat, I think to make a copy of clone of my HDD on an external USB drive. The general plan is like that,

  1. make a copy of mobile on external USB HARD drive

  2 mud with linux - and foolishly autour reformat the entire process

  3. have fed up with linux and want to return to windows

  4 copy of retrospective data from usb driver external HDD latop

  5 return to the comfort of win8

  With the help of this tool (clonezilla) will work in the above scenario?

  http://www.MakeUseOf.com/tag/free-advanced-hard-drive-cloning-solution-from-Clonezilla/

  If not, are there any other alternatives (free if all goes well) I could use?

  My intention with the backup, is that after that I have 'restore' things, "a key recovery" button should continue to work as before.

  -Abraham V.

  Make the plan will cause OKR is not functioning properly. To prove this to get a hard drive of exact size and make a clone of hard disk of the device. Remove the hard drive from the unit and place the disc clone hard inside. You can now play with the disk hard clone to your hearts desire but OKR first test if it still works. Even if OKR no longer work, you can proceed with the installation of linux. Once you're disgusted with Linux everything you have to do is replace the hard disk clone with the original hard drive and you're back to win with OKR 8 still works.

• I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp.

  I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp. Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ?  I would that all is the same except the size of your hard drive will be increased.

  Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ?

  Yes.

  You use the disk cloning software.  In some cases, a new player may even be bundled with software that will do this for you.

  Unless your laptop has a second drive Bay (most don't), you will also need an external hard drive enclosure.  As a general rule, these connect via the USB port, although if your laptop has a connector FireWire or eSATA you can also use these interfaces.

  You must select your external enclosure based on 3 criteria: the type of connection to the laptop. the physical size of the disc (2 1/2 inches for computer laptop drives); and player interface (determined by the connection of the internal drive of your laptop). For example only (no recommendation), if you wanted an enclosure for a 2.5 IDE drive "which connects using USB 2.0, Newegg has 17 products

  The (slightly) more expensive items among the software, you will need.  For example: http://www.newegg.com/Product/Product.aspx?Item=N82E16817155602 this particular House will work with SATA or IDE drives.

  If you buy an external enclosure that doesn't include cloning software, the software may be available for free from the manufacturer of the new 320 GB drive (e.g., http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal

• SMART FAILURE SCHEDULED DISK HARD 0

  Hello

  I USE DELL STUDIO 15 AND I HAD THIS PROBLEM, WHENEVER I RESTART MY SYSTEM IN THE LAST FEW DAYS...

  SMART FAILURE SCHEDULED DISK HARD 0: ST9500420ASG-(S1)

  HOW SHOULD I DEAL WITH IT...

  Remove the disc, ride in a 2.5 external hard drive enclosure "and attach it to a system that works by USB.  You may still be able to read all or part of your data.  If you can't, you must then decide if the professional data recovery worth the cost - it can work in a few thousand dollars, however.

  When you replace the disk, make sure you buy an external hard drive backup so that you are not faced with this situation potentially very painful in the future.

• How to disable disk hard identification in LR 3.3?

  Hello!

  I have a problem with the LR 3.3 on my Windows XP. I have a lot of hard drive (1 TB, 2 TB SATA2, made by Samsung) in my XP system with my RAW photos, all encrypted by Truecrypt. When I need to import my photos existing warranty hard disk (Truecrypt is the best tool I tested), LR 3.3 blocks the Move option and add in the import dialog box.

  I have to reproduce my photos by copy only - options and Memory Card

  LR 3.3 is the thought, that my encrypted hard drives are my memory cards and disable add and move option.

  How to turn off this bad identyfication?

  And in the end, every time when I want to import photos - LR 3.3 seeks all my TB hard disks (more then 30 minutes) to create / view my thumbs folders - and I can't stop this search. How to turn off too?

  Concerning

  Remisteness,

  There are a few things to mention about your problem:

  (1) analyzes all drives after importation from

  Just after the opening of the import dialog box, try clicking on a hard drive as soon as possible and uncheck 'include subfolders '. This should prevent the scanning of readers.

  (2) what is presented to the o/s for an encrypted device

  Of course, your encryption software presents 'virtual' disks as removable devices for the operating system, which led LR to treat them as 'cards '.

  I have a similar software used to access data encrypted in "File containers" (Backup PrivateDisk). In backup PrivateDisk, I can configure the way a 'virtual' drive is presented to the operating system, either as a device removable simulated hard drive. If I choose 'Simulate the hard drive', the 'virtual' drive is represented as a hard drive in my WinXP and LR does not show as a removable device, thus without the restriction on 'Cards' during the import.

  (3) the restrictions imposed by LR while the importation of "cards".

  LR prevents users to move photos when directly accessing a memory card, because if a file would get damaged when importing valid none of the copy of the image would not exist everywhere. Also, adding photos residing on a real memory card makes no sense either, that too many users would look for their original images after disconnecting the (and possibly reformatting) memory card.

  There was a long discussion in this forum lately on whether it makes sense or not that LR is trying to protect users of hurt them. I guess we can see it either, and the limits chosen by Adobe type to protect Adobe from too many questions/accusations.

  (4) solution to workaround for LR 3.3

  To be able to add or move a removable device in LR 3.3, you can do the following:

  1. You create one or two import Presets, with adding / moving as long as the action to perform. You must create these presets while doing a test import to an external HARD drive or of interal, then save from there.
  2. When you access your removable device, navigate to the drive by clicking on the drive letter in the drive below "Files" list and not clicking on the removable device in the section "devices."
  3. Choose one of the built in step 1 import presets

  This will use move or add as the action to take (to be noted that no action at all is highlighted), even if you import from a 'map '.

  Because this behavior is a hidden feature / without papers (or same bug?), we do not know if this possibility will be existing in the future releases of LR, but at the moment it seems be a workaround.

  Gossweiler beat

  Switzerland

  PS: After losing this post in full because of a Web error the first time that I wrote it, I hope this information can help you with your problem.

• How do I change or remove the password disk HARD on my Tecra A9

  Hi all

  I looked for where I could, but didn't find any indication at all, so I'm asking here.

  I have a Tecra A9 in need of resettlement, what I like to do for me.
  I have a very good password on the HARD disk which I do not wish to give. So I want to change it or remove it completely.

  Please someone, how do I do? In the BIOS, I don't see that it has been defined, but all what I try, I can not change or get rid of it.

  Maybe I should add that since the original installation of the PC it was years ago and I don't remember not the 'Administrator' password.

  Everything is under control. I know the 'controller' password and have already successfully removed the BIOS password. Smart TPM is disabled.

  BUT what the disk hard drive password?
  Any help much appreciated!

  Thank you!

  Hello

  I've found several interesting documents on HARD drive password. Please read and if you have any other questions do not hesitate:
  What is A HARD DRIVE password?
  Is it possible to delete a HARD drive password?
  After removing the BIOS password you will be asked a password HARD drive