Picture of delay

Similar Questions

• Canon 70 d - delay in taking pictures

  Hello world:

  I just bought my first digital SLR - a Canon 70 d with the 18-135mm kit lens. I'm still very new to this, but am anxious to know if I was starting to use the camera by chance to get a feel for it and read the manual before taking my first class in a few weeks. I have a problem a little capture a few shots, however, because I have a good few seconds delay after pressing the shutter button. I am sure that I am pressing on to Midway and then the rest of the way as the manual says, but I must be something wrong or have a certain setting on, no? I can't seem to figure it out, so you thought everything might be able to help me here.

  Thank you!
  Kristen

  Kristen, welcome to digital Canon DSLR photography. Here's a thought - are you sure that you do not have the self-timer turned on? To do this, turn off your camera button on the DRIVE (deuxieme to the left of the right upper side of your camera). In the LCD window, look at what a symbol is in the box on the top row, second from the left. If there is a symbol that resembles a stopwatch (it may have a 2 below), you are in self-timer mode. Move the wheel behind the shutter button to switch to a different drive mode - you want to probably the single rectangle if you are a beginner. Let us know if this is not the problem.

• In Apple TV why pictures are not displayed

  Hello

  I just tried to show the pictures in my pictures Apple on 2TV Apple program, but not all the photos appear, some areas where their must be a photo there is a question mark. I have over 2000 pictures don't you think that I do not give enough time to time Apple TV load. I give him about five minutes?

  TA

  I presume you can see photos on the iPad or any other device that plan you to? What you described is usually due to a delay in the download or corrupted images.

  If you can see them on another device then I would give him a little more time

• Re: Satellite A200-1AX - black and delay image display

  My Satellite A200-1AX is 3 weeks old and its LCD screen has been replaced by Toshiba Center here, to the Kuwait due to defects.
  After placing the new LCD screen I notice that whenever I'm turning on and off the device, a black picture delay appears slowly and disapperaing.

  Can you please tell me if this is normal in appearance as the technician in the Toshiba Service Center told me?

  is there a problem with the installation of the new LCD?
  I find this thing as an abnormal display when booting and the shutdown of Unity State.

  Hope that give you sometimes meet me and best regards.

  Hello

  It very difficult to understand how this question is similar to s

  But to be honest I didn't noticed any delay return image on my laptop
  If I boot the laptop, the Toshiba start screen appears and then after several seconds the notebook starts the Windows operating system. The screen immediately goes from black to blue (windows form). The same phenomenon occurs during the closing procedure

  This issue is perhaps something to do with the first replacement of the screen, but this is just a suggestion

• Why is relativeInitalX value not taking into account the triggering delay? using scope OR with the PXI-5124

  Hi all

  play with a digitizer PXI-5124 in a case of PXI1042Q with a PXI8110 controller that runs labview 2012 (latest updates) with the latest version of the driver NIScope.

  I put in place an acquisition of off-delay (by assigning the triggering delay, for example 20us) which works very well (I can tell by the signal I get delay control works correctly), but the data returned in the info wfm cluster (using the 2D version of niScope I16 Fetch) does not have this delay.

  Description of the relativeInitialX within this cluster indicator indicates "is the time in seconds between the trigger and the first sample in the acquired waveform" but its never to return something around 1E-9 independent of trigger delay. Surely the relative initial x should reflect the triggering delay?

  I'm doing something wrong?

  Thanks for your help!

  So, I made a screenshot of the image in the section "Trigger Delay" link I sent you.

  

  Meaning of the symbol:

  T0 = original moment of relaxation

  T1 = time to trigger used in the acquired record (t1 = t0 + TriggerDelay)

  T2 = time of first sample in the record of the acquis.

  RX = relativeInitialX = t1 - t2

  Response to previous reviews

  «I understand what you're saying - so basically, if I want to know the delay of my trigger for the first sample in the record, I just add my delay time value to the relativeInitialX.»

  • Close, the delay of the original trigger (t0), for the first sample in the record (t2), would actually be TriggerDelay-relativeInitialX

  «.. . Nowhere does graphically describe where is the relative value of initialX real. »

  • Right, relativeInitialX is not a timestamp, so it is not a place on the timeline, it is the difference between two timestamps (t1 and t2 above), where the relativeInitialX name.

   

  "The trigger"record"is the straight line in the Middle, so expect relative to - 1/2 initialX record length?

  • Almost correct, because the reference trigger is relativeInitialX to the position of 50%, will be the time in seconds for 1/2 the record length. (i.e. If the registration has been long relativeInitialX, 2s = 1 s).  RelativeInitialX will always be the delta time between the trigger (t1) and the first sample returned in the record (t2).
  
  
  • For example using the picture above: If t0 is 10 sec, Trigger Delay = 3 sec, SampleRate = 1 kHz, = 1000 record size.  This means that t1 = 13 s.  Our record is long of 1s (1000 points to 1 DC between each = 1 s), if t2 = 12.5 sec.  If away from all these moments are absolute time, as the timestamps.  So relativeInitialX = t1 - t2 is 13-12, 5 = 0.5 sec.
  
  
  • As a side note, the reference position should not be 50%, you can configure to between 0-100%.

  Time not yet discussed record attributes

  I don't want to make you more confused, but there is another useful attribute in the waveform info that we've not yet discussed and its AbsoluteInitialX.  Starting from the NOR-SCOPE help file:"absoluteInitialX is the timestamp of the first sample of recoveries in seconds..." "So, using the above image, absoluteInitialX = t2.

  I hope this helps.  If a part is still not clear, let me know.

  -Nathan

• delay after each image record

  Hello

  Can someone help me please about an issue I'm facing. Basically, I managed to save five images in a directory, I now want to do is to save each image after a specific time period without interrupting the entire program. I tried to do this with the time elapsed time vi (under the calendar), but do not have to work. I know that it is possible using this vi. I think I have what I do is not the right way. Attached is a screenshot and the vi I haaving problems.

  Is that what you want? When you click on the button 'Save 5 images' type of lock, the VI is expected to produce 5 images, with a 3 second delay between them.

  Edit: this VI will also wait 3 seconds before you save the first file, if you want the first file to be created when the button is clicked, you must change the VI a little, so you can practice a little more

  Edit2: important to stress, that you didn't have any time in your loop to slow it down. If you run these timing loop, your computer tries to run it as soon as possible. This is not a good practice. So I put a wait 50 MS in the loop to be ok with this...

  Edit3: I also forgot to connect the cable to your digital indicator "picture #". You can put in the required place and connect the entire meter wire.

• How to remove the random delay to the extent

  Hi guys

  I had a little problem with a measure that I do in a subvi. Take a look at the picture (do not laugh please )

  

  Some first explanations:

  I put online a digital high in order to initialize a piece of hardware.

  Can I activate two relays. Time zero (T0).

  Then I have to activate the piece of hardware that I've initialized at startup.

  In the meantime enabled I do measure (here called Maling). The measure is 40 channels. I do measure on 10 circuits. Each of the 3 voltages and current measurement 1. Tensions are CSR and the current is differential. Sampling is 1000 samples at 1 kHz, which gives me a resolution of 1 sample every ms.

  After the measurement, I turn off the relay and the piece of hardware that I've initialized at startup.

  The collected data is transformed into an array of 40 lines and columns of 1000 with the data. In my loop for I extracted the data and make a comparison and put the data in a chart.

  Here's my problem:

  I get a random delay on each measure. I used to get the tickcount OpenG (could use framing). In the x - y indicator, I get 1060-1072 - ish milliseconds. I tried to subtract the 1000 ms of measure and delay of 60-72-ish "millisecond" added to my chart and dataindicators, but it does not work. When I use oscilloscope on 10 channels, I get the same measurement each time. When I do in Labview, it becomes worng because of the delay. I get exactly the same extent as the oscilloscope.

  In my own defense:

  I used the DAQ Assistant, because it gives me the wiring diagram of the material on my series M of NI USB-6225. Also I am not yet familiar with the implementation of the data acquisition without help. Yes, I looked at the forum and the examplefinder, but I spend too much time on this compared to help data acquisition.

  My measure should start just after the relay was activated. I think maybe using trigger on a clock internal, but not quite sure if it will help on the delay. My thoughts of setting this up would not use the DAQ help. Set up channels by using a loop For and do the measurement.

  You can maybe share some thoughts around the problem of delay and perhaps give me a clue on where to begin to remove this time limit. My DAQ should be ok because he has a limit of 250 k samples/s and I use it only 40 k samples. Do you think that the delay that I measure either before or after the measurement of 1000 ms?

  Kind regards

  Even

  My first reaction is that you are activating the fuses in parallel with your time of measurement and measurement on both. Move your clock of departure according to plunger PA and only to measure the time of Maling for beginners.

  (RelePWR-> Fuze Center-> time-> Maling-> time)

  /Y

  (next to welcome)

• Error 1074396154 allocated to off-delay.

  I use a camera GigE to capture an image and then check for a hole using IMAQ find a circular edge.  Whenever the device receives a trigger of the while loop processes and the results are displayed.  If the release is delayed for more than 5 seconds, I get error 1074396154 (IMAQ Spoke - not big enough Image for the operation).

  The loop must wait for the next picture before the treatment, so I do not understand why the error is generated.  Any suggestion would be appreciated.

  Kind regards

  Doug

  Hi Doug,.

  Have you tried to increase your timeout on your camera? The default value is 5 seconds and you see this behavior in 5 seconds right that might be causing the problem. Increases the open timeout measures and Automation Explorer, select your camera, select the attributes of the Acquisition down and increase the time-out value to 10000 ms.

  Acquisition from GigE Vision cameras with Vision Acquisition software - part II (Figure 4)
  http://www.NI.com/white-paper/5750/en

  Tim O

• contradiction between the delay and fetch file bmp

  

  Hi all

  I need to extract the BMP file in confirm.vi (pic2), but when I run the program, the BMP file will not come out correctly. the last picture always come out. (for example, the first photo has come out of time, but when image B should be out, he still see A photo.)

  the correct picture will come out correctly when I put the delay of 100 ms in the loop. but it will cost you lost time, two arraies have 300 and 20 elements separately. How can I do it more quickly to get the correct image? Thank you!

  Hi Yes,

  It seems that you used too many loops to make your comparison function. Try to use Search 1 D Array.vi to eliminate inside while loop.

• delay on the program

  When she gets the value I want, the program stops, but the robot continues to go for a second, then stops completely, how to get rid of this delay?

  Hello

  The image you set does not provide much to go off of, but it seems you could use LabVIEW for Lego Mindstorms.  If this is the case, I recommend posting on specific Mindstorms forum here:

  LabVIEW for LEGO MINDSTORMS and LabVIEW for education

  http://forums.NI.com/T5/LabVIEW-for-LEGO-MINDSTORMS-and/BD-p/460

  Providing the VI you use rather than a picture of the block diagram will allow people to offer the best advice.  It seems that your VI is built to stop when the sonar function returns exactly '40', but there is no way to discern what your program will do when this happens since the screenshot you provided because the sous-schema hidden within the structure of the case.  Try to post the code you have written as well as a clear description of what is the current behavior of your robot and you want it to do.

  Kind regards

• Delayed programs icons Writer has not gone

  We lost the icons for all of our programs and the screen saver - when you click 'START', and then programs, all are empty and we have no icons such as 'My Computer', Microsoft Word etc., my pictures, etc. when we put the computer on it initially went to "delayed write failed and he read that there was a"potential disk failure".»

  We can get "on line" and e-mail.

  Any help please! Thank you

  Hello

  (1) do you have made no changes before this problem?

  (2) have what troubleshooting measures you tried?

  Writeback failed

  Visit the Web site below:

  http://support.Microsoft.com/kb/330174

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

• Overloaded in pictures: how to handle shortcuts?

  In windows XP, I'm managing a very large number of photos in the shared pictures. I inadvertently duplicated a number of images which are now saying 'shortcut '. Others say "copy". I'm that shortcuts are useless without the original image, which I fear I've lost. Any suggestions on a. recover the original image, or b. How to avoid these problems in the future. My goal is to be able to download and view the pictures without the delays that I have now. Thank you!

  In windows XP, I'm managing a very large number of photos in the shared pictures. I inadvertently duplicated a number of images which are now saying 'shortcut '. Others say "copy". I'm that shortcuts are useless without the original image, which I fear I've lost. Any suggestions on a. recover the original image, or b. How to avoid these problems in the future. My goal is to be able to download and view the pictures without the delays that I have now. Thank you!

  ================================
  If left clicking the shortcut opens the original photo...
  You can right click on the shortcut and go to... Properties /.
  Shortcut tab / target field and see the path to the picture.

  If to the left by clicking on a shortcut does not open the photo...
  the original has been deleted or moved.
  If the originals have been moved... it's anybody's guess
  where are they now... maybe a search for .jpg
  some of them would be.

  In Win XP context menu that appears when you
  right click on a file... Create a shortcut / delete and
  Rename... are in the same section. I would suspect
  the shortcuts have been created accidentally
  When the intention to delete or rename a file. In any case...
  You can delete the shortcuts if you no more
  wish.

  Copies appear generally when multiple selection
  and the selected group is dragged before releasing
  the mouse button. A search for Copy Of should find
  all unwanted copies.

  Just as an experiment, try the following steps:

  Here's how to reproduce the unwanted
  copy of...

  Hold down your CTRL key and select multiple files...

  Place your pointer over the selected group
  (holding the key ctrl) and left click / drag
  the group even just the slightest bit... now
  release the mouse button.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Definition of the picture by default EDITOR in Windows 7

  This seems to be a topic that everyone has an answer for, but no one has the right answer. My problem is the following:

  I want to use photoshop as my default in the photo editor, but I don't want to open the default pictures with Photoshop (I want the display by default to stay as it is Photoshop becomes the default editor). As it is, my photos open with the Windows Viewer but they review with paint, (which has always been and remains a loss of 1s and 0s). I want Photoshop to open the photoonly when I choose Edit in the drop-down menu, I don't want to set Photoshop as the program default toOpen the photo files.

  Whenever I see this question that arises (regardless), there is always a delay giving instructions on how to set the default open program for image files. If that was the problem, I wouldn't have to ask here. Iknow how to set a default program. Unfortunately, setting the program default forediting of the photos isn't such an easy task. I'm sure that I could go into the registry and find the key and change, but it would be much easier if there was just a way to put within the graphical interface of Windows.

  The HedoBum very clearly defined its expectations for its desired were made to his PC and it just I want to repair my own.
  Excellent correction.  Thanks Konlii!

  Just a note to help other users.  I use PaintShop and I didn't install it on my C: drive.  Just to illustrate the correct way to update your registry database when your app isn't on your C: drive is like that.

  "D:\Program Files (x 86) \Corel\Corel PaintShop Pro X5\Corel PaintShop Pro.exe" '%1 '.

  I think (but just a guess) that the %1 means something in the sense of whether or not to use it or don't use it.  Because it is the executable for Ms Paint, I felt that it was necessary to include it for my application.

• 3 seconds delay after the application icon was clicked...

  I can't understand the following situation:

  When I I click on my blackberry application icon (in the Simulator), the application is fast, no problem. However, when I take that same code and place it on my blackberry, there are a few seconds of waiting time after that the icon has been clicked.

  can someone tell me how to reduce the delay? the first screen is nothing else than an image within an image field. I wanted to create a "splash" screen and I just show you a simple picture.

  After I click on the icon of the application (on my phone), I notice that there is activity because you see the arrows at the top right moving. but the user regular to non-techie, they do not know that the application has been started and they will just keep clicking on the icon over and over again.

  again, I click on the application icon and there are about 3 seconds just to show the image contained in the file of the project. If we're not going get the image from a remote site.

  the Simulator shows the quick image, but the phone creates a delay. any ideas how to minimize the delay on the application icon, click on?

  Thank you.

  CA

  I thought about it. I just moved the instantiation and several objects of a different class loading and later called these lines of code with an invokeLater method. My first screen contains only the image itself and the other class the rest of the code.

• where are my pictures bluetooth?

  I transferred some pictures of my Samsung phone to my rt of surface and couldn't locate the files. I checked in my photos and documents as well as my app data. I don't know what to do next.

  Hey Mike, sorry for the delay.  I my RT Surface with me now so I can make sure I tell you the good news.

  So my bluetooth icon is there already, but there is a setting for it.  To reach it, press on + W to search for parameters, type 'Bluetooth' and click on "change Bluetooth settings" (the one with the printer/camera icon) search results.

  In the box that opens, you should have a checkbox 'Show Bluetooth icon' to turn on.  You can also use this to turn on discovery as well.