Error 1074396154 allocated to off-delay.
I use a camera GigE to capture an image and then check for a hole using IMAQ find a circular edge. Whenever the device receives a trigger of the while loop processes and the results are displayed. If the release is delayed for more than 5 seconds, I get error 1074396154 (IMAQ Spoke - not big enough Image for the operation).
The loop must wait for the next picture before the treatment, so I do not understand why the error is generated. Any suggestion would be appreciated.
Kind regards
Doug
Hi Doug,.
Have you tried to increase your timeout on your camera? The default value is 5 seconds and you see this behavior in 5 seconds right that might be causing the problem. Increases the open timeout measures and Automation Explorer, select your camera, select the attributes of the Acquisition down and increase the time-out value to 10000 ms.
Acquisition from GigE Vision cameras with Vision Acquisition software - part II (Figure 4)
http://www.NI.com/white-paper/5750/en
Tim O
Tags: NI Hardware
Similar Questions
-
Why windows constantly error reports and turn off
Why windows constantly error reports and turn off. It is THE most reliable service.
* original title - sucks of windows *.
Hello williamiscome,
This error message do you receive?
The computer shuts down or restarts it?
Let know us and we will continue to help you.
Best regards
Matthew_Ha
-
Hello
To solve the problem that I have, program uninstalled, rebooted machine. Has conducted an audit of the registry and remove the entries from 7 registry errors in Links 2003. Rebooted the machine. Installed Links 2003, installed patch 1.05, 1.07, and Links2k3-nvidia_win7_FINAL. I also tried to launch, links 2003 Safe Mode and still, I get this error message: ERROR: Invalid allocation, 1610612738 bytes. Any help would be greatly appreciated.
ERROR: Invalid allocation, 1610612738 bytes
Processor registers EAX = 0 x 00000000 EBX = 0 x 00000000 ECX = 00000000 EDX = 00000000 Flags x 0 x 0 = 0 x 00000000
= ESI = 0X00000000 EDI 0X00000000 EBP = 0X0012F4A8 ESP = 0X0012F348 EIP = = 0X00000000
EIP (0X00000000)? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ??
ESP (0X0012F348) 0012F35C 0012F634 0012F62C 01DC3DC0 60000002 00010000 000001A 9 03C20DE0
00000100 0000002D 01DC4258 00000200 0000003D 01FDFDB0 76F5491C 00000014
75206AC4 84027F1C 00000674 75206E93 75206E9E 0031007E 75206E9E 004C002EDetails of the machine
===============
Name of executable: C:\Links 2003\LINKSMMIII. EXE
Executable hour, date: 19:49:12 Tuesday 3/30/2010
Command line:
Current directory: C:\Links 2003
Currently, date: 19:05:49 Tuesday 6/22/2010
GameOS build version: Version 1.1 02/11/2000
Software rasterizer: c:\links 2003\assets\binaries\blade.dll (size 282 693 bytes)
Username: Mike Harrison
Computer name: HICHAMCHGORA
Processor: 2812 MHz AMD 3DNow unknown MMX! Model SSE = 10, Type = 15, Stepping 0 = (6 processors)
Cache information: unknown
L2 w/r/rw speed: 4 cycles 22496 Mbps, 4 cycles 22496 Mbps, 4 cycles 22496 Mbps
Main memory r/w/rw speed: 14 cycles 6427 MB/s, 13 cycles 6921 Mbps, 10 Mbps 8998 cycles
W/r/rw video memory speed: 204 cycles 441 MB/s, 38 cycles 2368 Mbps, 289 cycles 311 Mbps
W/r/rw memory AGP speed: 204 cycles 441 MB/s, 37 2432 Mbps, 288 cycles cycles 312 MB/s
Operating system: Windows (6.1.7600)
DirectX version: 9.04.00.0904
Since booted time: 2 h 45 m 25 s
In the logic of the game time: 0 h 0 m s 0.62 (on frame 3)
App running time: 0 h 0 m s 0.62
Physical memory: 2 147 483 647 bytes (2048 Meg)
Physical memory available: 2 147 483 647 bytes (2048 Meg)
The swap file size: 4294967295 bytes (0 Meg)
Available page file: 4294967295 bytes (0 Meg)
Virtual memory: 2,147,352,576 bytes (2048 Meg)
Virtual memory available: 1,937,620,992 bytes (1848 Meg)
Amount of the used battery: 3172 bytes
Memory load: 31%
Desktop video mode: 32bpp 1920,1080
Mode when the accident occurred: full screen 1920 x 1080 x 32 (NVIDIA GeForce GT 220)
Networked Machine: No.
Executable version: 01.08.06.2200
PCI Chipset: unknownPath of Threads process Pri
==========================================
TaskHost.exe: 8: 8: C:\Windows\system32\taskhost.exe
DWM.exe: 13:5: C:\Windows\system32\Dwm.exe
BCU.exe: 8:6: C:\Program Files\DeviceVM\Browser Configuration Utility\BCU.exe
RoxioBurnLauncher.exe: 8:8: C:\Program SharedCOM 2010\Roxio Burn\RoxioBurnLauncher.exe
VxBlockServer.exe: 8:5: C:\Program Files\Common PX storage Engine\VxBlockServer.exe
SetPoint.exe: 8:5: C:\Program Files\Logitech\SetPoint\SetPoint.exe
KHALMNPR. EXE:-08:27: C:\Program Files\Fichiers Files\Logishrd\KHAL2\KHALMNPR. EXE
RtHDVCpl.EXE: 8, 9: C:\Program Files\Realtek\Audio\HDA\RtHDVCpl.EXE
Skype.exe: 08:20: C:\Program Files\Skype\Phone\Skype.exe
LinksLauncher.exe: 8:1: C:\Links 2003\LinksLauncher.exe
LINKSMMIII. EXE: 08:16: C:\Links 2003\LINKSMMIII. EXEVersion numbers of DLLS
===================
Msvcrt.DLL - Version 7.0.7600.16385 - found in C:\Windows\system32
'Msvcrtd.dll' is not found
Msvcirt.DLL - Version 6.1.7600.16385 - found in C:\Windows\system32
'Msvcirtd.dll' is not found
amstream.DLL - Version 6.6.7600.16385
Quartz.DLL - Version 6.6.7600.16385
Ir50_32.DLL - Version R.5.10.15.2.55
Dsound.DLL - Version 6.1.7600.16385
Dinput.DLL - Version 6.1.7600.16385
D3dim.DLL - Version 6.1.7600.16385
Ddraw.DLL - Version 6.1.7600.16385
dplayx.DLL - Version 6.1.7600.16385Audio device 0 (current) - (HW disabled mix)
==============
Description: Realtek Digital Output (Optical) (Realtek High Definition Audio)
Driver file: {0.0.0.00000000}. {cdc8ecc5-7109-4d8d-9ac9-dacfb4f56528}
Data of the driver file: can not find the driver file
CERTIFIED: No.
EMULDRIVER: No.
CONTINUOUSRATE: Yes
PRIMARYMONO: Yes
PRIMARYSTEREO: Yes
PRIMARY8BIT: Yes
PRIMARY16BIT: Yes
SECONDARYMONO: Yes
SECONDARYSTEREO: Yes
SECONDARY8BIT: Yes
SECONDARY16BIT: Yes
MinSecondarySampleRate: 100
MaxSecondarySampleRate: 200000
PrimaryBuffers: 1
MaxHwMixingAllBuffers: 1
MaxHwMixingStaticBuffers: 1
MaxHwMixingStreamingBuffers: 1
FreeHwMixingAllBuffers: 0
FreeHwMixingStaticBuffers: 0
FreeHwMixingStreamingBuffers: 0
MaxHw3DAllBuffers: 0
MaxHw3DStaticBuffers: 0
MaxHw3DStreamingBuffers: 0
FreeHw3DAllBuffers: 0
FreeHw3DStaticBuffers: 0
FreeHw3DStreamingBuffers: 0
TotalHwMemBytes: 0
FreeHwMemBytes: 0
MaxContigFreeHwMemBytes: 0
UnlockTransferRateHwBuffers: 0
PlayCpuOverheadSwBuffers: 0Video device 0
==============
Description: NVIDIA GeForce GT 220
Company / Chipset: nVidia.
Driver file: nvd3dum.dll
Driver size: 9 386 600 bytes
Driver date: 22:55:32 Saturday 4/3/2010
Attributes: Final Version, Private Build
Driver version: 8.17.11.9745
Version: 8.17.11.9745
Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
Video memory: 2,375,872,512 bytes (2266 Meg)
Mem texture map: 1,034,485,760 bytes (987 Meg)
AGP texture memory: 1,341,386,752 bytes (1279 Meg)
Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
CERTIFIED: No.
DRAWPRIMITIVES2: Yes
DRAWPRIMITIVES2EX: Yes
DRAWPRIMTLVERTEX: Yes
FLIPINTERVAL: Yes
FLIPNOVSYNC: Yes
NO2DDURING3DSCENE: No.
NONLOCALVIDMEM: Yes
NOPAGELOCKREQUIRED: No.
CALIBRATE the GAMMA: No.
PRIMARYGAMMA: Yes
ZBuffer: 16 24
Rendering depth: 16 32
Texture size: 1 x 1 to 8192 x 8192
Maximum U, v coords: 8192.0
Cutting guard :-100000000,-100000000 to 100000000,100000000
AlphaTest NotEqual: Yes
Lack of mixture of the CBC:
Lack of mixture Dest:
Texture AGP: Yes
Texture coords: 8
Mix the steps: 8
The Textures of max: 8
Hardware T & L: Yes
Vertex Blending: 4
Maximum lights: 8
Clip planes: 8
Mix Lightmap: Ok
Mix Specularmap: Ok
Mixture of detail: Ok
Vid linear memory: Yes
SELECTARG1: Yes
SELECTARG2: Yes
ADD: Yes
ADDSIGNED: Yes
SUBTRACT: Yes
MODULATE: Yes
MODULATE2X: Yes
MODULATE4X: Yes
BLENDCURRENTALPHA: Yes
BLENDDIFFUSEALPHA: Yes
BLENDTEXTUREALPHA: Yes
BUMPENVMAP: Yes
BUMPENVMAPLUMINANCE: Yes
DOTPRODUCT3: Yes
ANISOTROPY: Yes
ANTIALIASSORTINDEP: Yes
FOGTABLE: Yes
FOGVERTEX: Yes
FOGRANGE: Yes
WFOG: Yes
WBUFFER: No.
MIPMAPLODBIAS: Yes
WBUFFER: No.
ZBUFFERLESSHSR: No.
MIPNEAREST: Yes
LINEARMIPLINEAR: Yes
DONOTSTRIPELEMENTS: Yes
TEXTURE CLAMP: Yes
BORDER TEXTURE: Yes
MIRROR of TEXTURE: Yes
ALPHAGOURAUDBLEND: Yes
SQUAREONLY: No.
COLORFLATMONO: Yes
COLORGOURAUDMONO: Yes
COLORFLATRGB: Yes
COLORGOURAUDRGB: Yes
SPECULARFLATRGB: Yes
SPECULARGOURAUDRGB: No.Video device 1
==============
Description: NVIDIA GeForce GT 220
Company / Chipset: nVidia.
Driver file: nvd3dum.dll
Driver size: 9 386 600 bytes
Driver date: 22:55:32 Saturday 4/3/2010
Attributes: Final Version, Private Build
Driver version: 8.17.11.9745
Version: 8.17.11.9745
Hardware ID: 10DE.0A20 (Rev 162, Subsys 0 x 12253842)
Video memory: 2,375,872,512 bytes (2266 Meg)
Mem texture map: 1,034,485,760 bytes (987 Meg)
AGP texture memory: 1,341,386,752 bytes (1279 Meg)
Modes of FourCC: NV12 NV24 YV12, UYVY, YUY2 AI44 AI88 AYUV AIP8 AV12 PLFF NVMD NVDP NVDB SSAA ATOC
Texture formats: 555 1555 4444 565 0888 8888 bump N→∞ (8,8) bump map N→∞ (8,8) FourCC (1TXD) FourCC (2TXD) (3TXD) FourCC FourCC (4TXD) FourCC (5TXD) FourCC (SCVN) FourCC (UHVN) FourCC (SHVN)
Z buffer formats: 16 bit Z 32 bit Z (Z = 32 (0xffffff00) template = 8 (0xff)) (Z = 32 (0xffffff) template = 8 (0xff000000)) 32 bit Z 24 bit Z
modes 16 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
mode 32 bits: 800 x 600 1024 x 768 x 1152 864 1176 x 664 1280 x 720 1280 x 768 1280 x 800 1280 x 960 1280 x 1024 1360 x 768 900 1600 x 1024 1600 x 1600 x 1200 1680 x 1050 992 1920 x 1080 x 1768
CERTIFIED: No.
DRAWPRIMITIVES2: Yes
DRAWPRIMITIVES2EX: Yes
DRAWPRIMTLVERTEX: Yes
FLIPINTERVAL: Yes
FLIPNOVSYNC: Yes
NO2DDURING3DSCENE: No.
NONLOCALVIDMEM: Yes
NOPAGELOCKREQUIRED: No.
CALIBRATE the GAMMA: No.
PRIMARYGAMMA: Yes
ZBuffer: 16 24
Rendering depth: 16 32
Texture size: 1 x 1 to 8192 x 8192
Maximum U, v coords: 8192.0
Cutting guard :-100000000,-100000000 to 100000000,100000000
AlphaTest NotEqual: Yes
Lack of mixture of the CBC:
Lack of mixture Dest:
Texture AGP: Yes
Texture coords: 8
Mix the steps: 8
The Textures of max: 8
Hardware T & L: Yes
Vertex Blending: 4
Maximum lights: 8
Clip planes: 8
Mix Lightmap: Ok
Mix Specularmap: Ok
Mixture of detail: Ok
Vid linear memory: Yes
SELECTARG1: Yes
SELECTARG2: Yes
ADD: Yes
ADDSIGNED: Yes
SUBTRACT: Yes
MODULATE: Yes
MODULATE2X: Yes
MODULATE4X: Yes
BLENDCURRENTALPHA: Yes
BLENDDIFFUSEALPHA: Yes
BLENDTEXTUREALPHA: Yes
BUMPENVMAP: Yes
BUMPENVMAPLUMINANCE: Yes
DOTPRODUCT3: Yes
ANISOTROPY: Yes
ANTIALIASSORTINDEP: Yes
FOGTABLE: Yes
FOGVERTEX: Yes
FOGRANGE: Yes
WFOG: Yes
WBUFFER: No.
MIPMAPLODBIAS: Yes
WBUFFER: No.
ZBUFFERLESSHSR: No.
MIPNEAREST: Yes
LINEARMIPLINEAR: Yes
DONOTSTRIPELEMENTS: Yes
TEXTURE CLAMP: Yes
BORDER TEXTURE: Yes
MIRROR of TEXTURE: Yes
ALPHAGOURAUDBLEND: Yes
SQUAREONLY: No.
COLORFLATMONO: Yes
COLORGOURAUDMONO: Yes
COLORFLATRGB: Yes
COLORGOURAUDRGB: Yes
SPECULARFLATRGB: Yes
SPECULARGOURAUDRGB: No.Hello again,
I want to thank each and everyone of you for your input to try to help solve the problems I've had with links.
I am happy to report that I played my first round in nearly two weeks in this... Morning. The problem is a corrupted file, .l3. I have a little more 1 100 PoliAnis' and am not sure which one is, but I can play. I tried whenever I took one of the following folders on until I finally took the PolyAni folder:
WAVs, mops, Custom photos of players, sky, Clubs, PIN code files and finally, all but one of PolyAni files. That after taking all but one of the frequented out of the folder PolyAni links has started without giving me the error of attribution not valid.
Thanks again to you all for your help.
Sincerely,
Mike
Really_Rotten
-
Delete Obsolete gives error device allocation
Hi experts RMAN,
It comes to 10.2.0.4
I use RMAN to make backups scheduled the disk. Never on the Strip.
Today, when I ran RMAN > remove obsolete; I got 2 errors:
ORA-19554: error device allocation, type of device: SBT_TAPE device name:
ORA-27211: unable to load the media management library
I don't know what I can do to work around this error. Do I need to set the default device the disk type?
Thank you
JohnHello
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 35 G;
is the source of the problems.Run:
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' CLEAR;And check if all entries in sbt_tape disappeared in the output of
If so try to backup again.Kind regards
Tycho
-
HP Laserjet Pro 400 color M451nw - formidable error 79; Turn on/off.
By HevnLgh; Asked me to this post in the trade forum.
I scoured the internet to find a solution to my problem and I can't find an answer for her.
Error 79 came in our printer last week and has not recovered since.
Here are the solutions I have tried or attempted to have tried:
- Soft Reset - it turn off and save
- Hard Reset - unplug the power cord for 60 seconds or more and in him plugging back in
- Do the above AND have the network cable unplugged everything by
- Tried to update the firmware. Cannot. The printer makes a loop in a ready state in error 79. When you try to connect using a usb cable to update, windows can't detect the printer during the loop it is in error 79.
Any ideas?
Thanks in advance.
If you turn the printer off, unplug the network cable and only connected on power and then turn on and you get the error 79, then the trainer is toast and needs to be replaced. If on the other hand with the network cable disconnected it is loan and only goes to the error 79 when the network cable is connected, then that would mean you have a bad job in the system tries to print whenever the printer talks to the network and you must remove the computer or server.
-
error unknown message turn off '-auto'
I have a hp pavilion p7-1254 and when I connect I have an error message "unknown switch '-auto" "' how can I get rid of him?
I had downloaded Photo Creations. It began after that, so I uninstalled and reinstalled and so far I don't have hadthe problem
-
I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5
Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."
See if http://support.microsoft.com/kb/902274 help--..--"andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...> I'm on resolution 5, I used four different and no resolutions are> work them, and I do not understand how to apply the meanless 5.> Resolution 5> Turn off the connected BlackBerry advanced power management features> smartphone. For more information about how to disable the selective USB> suspend functionality in Windows, see the Microsoft Help and Support site> and look for "disable usb selective suspend."> -
C4780 will not print. Printer error: Please turn printer off, then on
Printer: HP Photosmart C4780 Print.Scan.Copy computer: Mac
My printer was working fine and then it stopped working. I bought about 6 months ago and use it not very often (a few pages per month).
Problem:
When I try to print a document, the printer tells me to "Please turn printer off, then on.
Trying to solve: turning the printer off, then on. uninstalled and reinstalled the software; element removed print queue and tried again. checked the inside of the printer for jams or lose parts but all seems normal.
All ideas/suggestions/solutions?
Thank you
OK, first of all we will reset the printer. Turn off the power, unplug the power supply from the back of the printer and the wall. Wait a minute or two, plug it back in and turn it on.
If this does not work, reset the printing system:
-Sys Prefs, Print & Fax
-Right (Ctrl) click the box of the print queue and select Reset Printing System.
-Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks. -
>; psr TMADMIN_CAT:116: ERROR: memory allocation failed.
Hello
return TMADMIN_CAT 116 for tmadmin command psr when MAXSERVICES is equal to 300,000. In the documentation set "number ofMaximum of various Oracle Tuxedo services which may be advertised in the application. The value of
MAXSERVICES
must be greater than 0 and less than 1 048 574. If not specified, the default value is 100 ".tmadmin strace I see that
mprotect(2) (0xed300000, 135168, PROT_READ |) PROT_WRITE) = 0
mmap2 (NULL, 4278030336, PROT_READ |) PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS,-1, 0) =-1 ENOMEM (cannot allocate memory)
135168 TUXCONFIG CPI, tmadmin tent card 4G, when tmadmin is a 32 bit so process return ENOMEM.
Is posible that it was a bug? Is posible MAXSERVICES for 32 bit tuxedo was lower?
Thank you.
Concerning
Hello
It seems that MAXSERVICES may have been increased to 1 048 574 I guess that memory which can limit the constraints of a 32 bit machines. I think open a support request to My Oracle Support just to get it clarified and is without doubt the updated documentation up to the actual limit on a 32-bit computer. It may be difficult to arrive at a real even if limit as the BB size depends on many factors. We should certainly report in tmloadcf BB that results is going to be too big for the possible address space if that's the problem.
Kind regards
Todd little
Chief Architect of Oracle Tuxedo
-
"scanner 6 error, turn off then back in market"
HP LJ300 m375 says error scanner 6, turn off, and then go back' after I scan a document to my computer.
I stop (and even disconnect) and restarts and it allows me to scan once more and then the error is back and I can't scan again until I turn and turn it back on.
I don't get this error when I scan to a USB Flash drive.
How can I get rid of this error?
Thank you!
Hello!
I have something that might work for you. I'm assuming you want to scan your PC using the HP scanning application. If this is the case, the default resolution (DPI) is 200. Try to use 300. We are still looking, but this seems to work around the problem.
TLB
I am an employee of HP
-
The TIFF to write IMAQ 2 - 1074396154 error occurs when saving a camera, but not two
Hi all
I have a program I customized based on example programs (e.g. triggered Grab loops producer-consumer) LabVIEW. The VI allows the user to choose the number of cameras they would like to use for acquiring (between 1 and 4), as well as the trigger source - either a constant material counter or a manual release that is connected to a digital input.
Acquisition works very well with any number of cameras (using a loop of producer), however I'm running on an issue to save images in the loop of the consumer. Frames are removed during the registration process, when I have the 1, 3 or 4 cameras option selected. I get error 1074396154: Image is not big enough for the operation. This question is somewhat improved by hard-coding the size of the image of 1280 x 1024 (as suggested here), but a loss of image is still intermittent. I never ran into this issue using the 2-camera option.
I have attached my code here. Anyone has any advice on why this error occurs only in some cases? Is there a setting that I need to configure for IMAQdx?
Many thanks in advance,
Tracy
Unfortunately the code is too big and can not look in every corner.
S ' Please try using SubVIs to make the simplest code: http://www.ni.com/white-paper/7593/en/
-Coming from another question, IMAQ Create(User Buffer) creates the reference to the image.
-You create an image to copy image to this place, you get from IMAQdx Grab.
->, You are able to see the image in indicator Camera1?
-> Use your Get size vi after grab and internal image structure deal just before enqueueing and see if it is to have the image size valid.
-Now let's say that if you get another picture before saving this image, then the image will be replaced.
-So if your writing process is too slow, you must create the buffer sufficient user.
-> In your loop of consumption within case accession after unbundling image thread: https://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/using_the_probe_tool/
-
We took a 32-bit 10.1.2.3 B2B instance on Linux. We have dedicated as much memory as possible to the JVM and for some messages we receive memory errors in allocation of native code NYI (EDIFACT). When the native code allocate the memory?
My real question is whether we should allocate less memory for the JAVA virtual machine in order to make more memory in the 32-bit address space available for the operating system for allowances of JNI or what we should do instead. There are many memory physical machine (16 G, no more than 4 G) it must have something to do with the 32-bit limitation.My mistake. Not sure which used Oracle of the API, but for native code memory must be allocated in the heap of BONES and not in the java heap.
When execution of a piece of large capacity memory is requested, then the allocator of OS will try to find that OS bunch and if she couldn't then returns the bad_alloc exception (as far as I know, bad_alloc is a class in the C++ standard library). It needs a lot of debugging to know the exact cause and find a solution; and for this, Oracle's Support is certainly knocking on the right door.
There are many memory physical machine (16 G, no more than 4 G) it must have something to do with the 32-bit limitation.
This statement is interesting because as far as I know, Linux does not need to be defragmented and so if 4G memory is available then bad_alloc exception should not come. However I still can not comment because there are other factors as well that should be considered, as - size of the payload, of environment settings, by the memory of the affected user, by the maximum memory allocation process has allowed etc.
Please check the above factors and try to find any occurrence of pattern/common between exceptions. I'm not a linux expert, but again, it seems that the problem is with OS and its parameters.
Kind regards
Anuj -
Tecra 9100: Delayed write failed - hard drives on their way?
Hello again,
I am a member of the Club feared messages error "delayed write failed" and some of that my hard drives are to blame.
These errors pop - up when a large enough facility is in place, or whenever my system is written something great for my hard drives (which I might have to wait a while to complete). It happened before installing the battery Bluetooth Toshiba. My laptop has finally frozen during installation and all I could do was to move the cursor. 30 minutes in the installation, I get several of these stupid error messages. They say ' delayed write failed - file C:/xxxxx/xxx/xxxx was not justified perhaps due to a connection or hardware problem "(or something like that). When the message window there is almost no way to escape in out makes a power off. But when I turn on the back, I get the blue screen of death that checks my record of inconsistencies. It is very annoying and disturbing because it means probably that my hard drives should be cracking up.
After doing the search several times on the issue, I know it's my hard drives fault for sure. I have two hard drives; They both give me error messages. They must be on their way, after all I bought this 2nd hand computer laptop and they made noises strange "at delay." Recently, I noticed once they made a "beep" "beep". Never heard before so it cannot be good.
In any case, I think that I need new hard drives. Can someone recommend me one or two who are used to give me these error messages (and are relatively cheap at least 30 GB)? Thank you
P.S when I opened the PC health since the Toshiba Management Console it says '' drive S.M.A.R.T (disk 0) may fail soon. '' Ouch.
Hello
Each HARD disk with adequate material specifications may work on the Tecra 9100.
The HARD drive should support an interface IDE (ATA-5) and should not be larger than 60 GB.
I'm sure that BIOS Tecra 9100 will support 30 GB, 40 GB and perhaps also the 60 GB.
But the larger sizes of HARD drive might not be recognized by the BIOS correctly.By the way; You can make a call to the Toshiba authorized service provider in your country and could order the compatible HARD drive.
In this case, you will be sure that the drive is supported and runs without any problem to 100%. -
Delayed write failed - and now he cannot start Windows
Help!
I'm in big trouble! I was using my Tecra 9100 (running XP SP2) and was looking for some files I had stored on my memory stick. I selected "remove hardware" and pulled my memory stick out when I had finished. All of a sudden my cell phone begins to run slowly and an error message pops up saying "delayed write failed".
This is a first for me, and I don't know why this has arisen. I read what he had to say less than the error: "Windows was unable to save all the data for the file \Kaspersky (don't remember the exact name, but it had to do with Kaspersky).» The data has been lost. This error can be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. »
My phone became so slow that it is insensitive (although I could move the cursor) and remained so for 10 minutes. I tried Ctrl-Alt-Delete, nothing happened. As I could ' t stop Windows, I had to hold the button for a few seconds to turn it off immediately. During the passage of my laptop, I noticed my bootscreen took about 15 sec more than before and the blue screen appeared saying "Windows needs check your disk for constincency."
An hour or two later, I recorded in my computer and noticed my cursor was rather nervous and not as smooth as before. It was not right and about an hour or later the same error popped up again and my phone froze. After another power off, the blue screen showed again with the message "Windows needs to check your disk for constincency" and this time I waited about 4 hours!
When he was finally done, my laptop restarts automatically and the blue screen appeared again! This time cancelled the disk check and when straigh to the login screen. I connected and noticed that the laptop was not aware that it was usually with the mouse still jumpy. I decided to restart the laptop only to display the blue screen again.
I let go this time and just whereas scan. After that 20 minutes, nothing seemed be the case in the analysis so I turned off. Now, my computer is messed up seriuosly. When I switched back on it the screen that says at last know good configuration and boot into windows that normally presented themselves.
Now, no matter what I select my laptop just restarts and says cannot take place due to a corrupted or damaged in \Windows\System file. You can attempt to repair this problem by inserting the Windows installation disc. "What is the Windows installation disc?
My laptop is second hand and came with no recovery disks ect. and has already installed XP Pro so I don't drive. what the hell am I going?
help will be very appreiciated. thanx.
Hello
There are only 2 possibilities:
Buy a Toshiba restore CD and reinstall the entire system. Then all your data will be deleted.
Or get a normal Windows CD to repair the system.
Sorry, I don't have better news for you.Good bye
-
Error 1051030 - all by running a file beats running a MXL
I have a BAT file that runs a MXL file. The MAXL file runs EAS calculation scripts. He worked previously, but off delay all beats by running the file I get this error. (See below)
When I log in INJURED I can run scripts. If the planning application exists and works. By browsing the Oracle Forum and documentation, I noticed when the file essbase.cfg is corrupted these types of errors can occur. I think the Essbase file is in good shape. Thoughts and suggestions are very appreciated.
If you start a session MaxL and connecting with the same user admin2, running
display application;
Is the application that you are having problems with return to the list of applications.
See you soon
John
Maybe you are looking for
-
Google mail at-icons of exclamation triangle making reference to a mistake in google mail
Why do I get an error message in google mail saying that "connections to the server 'map.gmail.com' on ports by default has expired?
-
Hello world. I want to buy HP Envy 700-210 computer, but I think he has only a DVI - D output. How to connect the monitor to it? I also have a HD TV with an hdmi port. How to connect the computer to my TV to have a second screen? I have another
-
0xc18a0106 on Photosmart c5180 error code
I followed the recommended procedure, but the problem persists. The printer connected to a network home via the gateway. The printer does not work and returns the error code 0xc18a0106 on the front panel of the printer and work is the removal of the
-
7 pixel dead on the iPhone 6 sec more
Hello! I bought an iPhone 6 s 12/01/2015 more. Not even a week using it. The pixels are white and they are all over the screen. If I take it to an Apple Store, they replaced it for a new? I restored the OS, and I have no backup now. What is Apple's p
-
HP psc 750xi - USB connection. New windows7 professional 32-bit. I downloaded the proposed driver from hp.com but ' the selected printer is not currently supported by this wizard ". Help