Picture of Split & summation problem

Similar Questions

• The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?

  The viewer or split display problem: I am getting small white boxes (similar to those seen in the browser) superimposed on my photos. Any ideas how to fix?  There must be a display problem in the software.

  Have you of the 'show Talking Points' enabled in the view menu? Then you can see small white boxes superimposed on the image in the Viewer.

  

  You can enable or disable on / off power with ⌥F talking points.

• Split Tunnel problem.

  Hello.

  All started to play with split-mining.

  So far so good.

  I can access the server when the Tunnel of splitting is disabled, and my itinerary looks very good. But cannot access the internet.

  I can not access the server when the Tunnel of splitting is enabled, my itinerary seems wrong. But can access the internet.

  I think it's my access list the problem (also tried to overthrow).

  split_test list extended access allowed host 4.4.4.4 ip 10.10.253.0 255.255.255.0

  attributes of the strategy of group test_policy

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list split_test

  I read that I can't filter on the ports during the shared use of tunnelling, is this correct?

  

  I have attached a quick drawing of the installation.

  Best regards, Søren.

  Hello

  Then you can use the following version of above indicate changes in configurations

  attributes of the strategy of group test_policy

  No split-tunnel-network-list split_test value

  No list of extended split_test access not allowed host 4.4.4.4 ip 10.10.253.0 255.255.255.0

  host of access TUNNEL of SPLIT standard allowed 4.4.4.4 list
  

  attributes of the strategy of group test_policy

  no value of split-tunnel-network-list SPLIT-TUNNEL

  The above configuration would be basically set up the VPN Client connection so that connections for ONLY the IP 4.4.4.4 the VPN connection will be provided by the user.

  As I understand it, the traffic of users to the destination server would only be encrypted between the Client and the ASA. From there it would be just like any traffic between hosts on the external network. Except of course your ASA has a separate VPN L2L connection on the site where the Server 4.4.4.4.

  Even if the above Split Tunnel ACL configuration is correct, you will still need to manage the NAT for VPN Client users. To determine the NAT configuration correct, I need to know the version of the software of your ASA and the current dynamic PAT rule for internal users, for example if the VPN users are supposed to use the same public IP address for their IP NAT address.

  Also, you will at least have to add this configuration on the SAA

  permit same-security-traffic intra-interface

  This will allow connections to VPN users enter through the 'outside' of the interface and head to this same ' outside ' interface. It is not possible without the above configured command even if all other configurations were correct.

  -Jouni

  Post edited by: Jouni Forss (typos in the post)

• Double/split screen problem

  See attached image - during an editing tool, my main monitor splits program in 2, timecode is displayed, and I have to wait a few minutes until it stops! I can rub my calendar, but it makes no difference.

  What is going on? I just got a new PC 2 weeks because I thought that my old one was too slow for 2015 CC - I spent over 2 k € to this exact issue go away! But it's still there!

  

  Thank you.

  Hello

  Please check the forum post below.

  Re: Program Split window monitor problem editing feature.

  Vinay

• AnyConnect SSL VPN Split tunneling problem

  Hello

  We have home users that VPN in on a regular basis, but when they VPN in they cannot print locally or to connect to local resources.  Is there a way to activate the split for all remote users VPN tunneling?  It is not possible to add all the remote subnets, especially since I don't know which subnets are used and it would be a question of management.  I noticed that when I connect to the House a new route is added to my PC, who prefers the VPN link.

  I noticed one of the options with the client Anyconnect is 'enable local LAN access (if configured) '.  Can I use?

  Thanks in advance.

  Hello

  According to my understanding, you need to connect to your local printers while you are connected to the ASA via SSL VPN.

  You can do this by creating a policy of exclusion of tunnel split on SAA and the local lan access on the client option, or you can use the profile AnyConnect allowing local lan access.

  Please find the link below: -.

  https://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080702992.shtml#dsfg

  I hope it helps.

  Thank you

  Shilpa

• Program monitor Split function problem of editing window.

  How can I keep my window the program monitor to split into two separate video clips? I don't speak of multi-cam editing what happens when I'm downstairs in the timeline and it kills my productivity because it takes a long time to make a change in a single video frame where I can continue to edit.

  HELP GREATLY APPRECIATED!

  RIP Noel

  Hello

  Is it using specific tools such as the ADJUSTMENT tool?

  Try this:
  Disable "Composite overview for Trim ' under 'timeline view settings.

  

  Thank you

  Regalo

• Save text pictures on the phone problem

  I have a photo sent by SMS that I want to record on my phone, so I can send by e-mail. When I opened the peak on the text message, I hold my finger on the photo, but the flash menus upwards and disappear instantly. I tried power off and restart the phone... same thing.

  Any ideas?

  Thank you.

  Long press corps text on the attachment, do not open the pic.  Who give a shot.

• Channel alpha export Apple Motion problem

  Hello, I expose the problem I detected MOTION v. 5.2.3 (Yosemite 10.10.5) if I create a publication with effect of scale and export with alpha channel

  (Apple ProRes 4444 - color + alpha, prmultiply apha)

  I have a problem, or that the exported video does not contain alpha channel. compositing as in the image:

  

  But if the elements of the composition with stairs do not go on the canvas, the alpha channel is implemented, see the attached picture:

  

  until this problem did not exist and for years I have been working with the MOVEMENT, how can I fix it? How can I solve this problem? Thanks for any response.

  I do not see that. Are you able to zip and download your project somewhere for us to check it out?

• Satellite A200-1VD: problem with HDD disk

  Hi friends;

  I'm sorry for my bad English:

  I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

  Don't forget to see the following pictures to understand my problem.

  * - [http://img96.imageshack.us/img96/5339/discv.jpg]
  * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
  * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
  * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
  * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

  Thank you very much

  Hello

  At first was a little bit the theory for a better understanding.

  In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
  The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

  This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

  I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

  I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  If you have any other questions please let us know.

  Bye and good luck.

• TV 22 '' Toshiba to bar problem

  Hi, I have a new Toshiba 22L1334G 55 cm TV and a problem with a bar (band/line) with ads or the options at the top of the screen. I have try all the keys and the settings option to remove but it just don't hide. Here is a picture of what I mean (: [https://mail.google.com/mail/u/0/?ui=2&ik=75503490cf&view=fimg&th=1434024bf3876eaa& attid = 0,1 & disp = inline & realattid = 8c4d3e680b48feb4_0. 1 & safe = 1 & attbid = ANGjdJ-ADKerCHbuHwC7dXtOvoqYln_jgmQgTX2r8AZIL1xy8VI05LYgt FVqH9nYVFPMURivoEt4fEfdbdn4ijQkTk746Vh_8poizgts7wp IFR0_X_lSYYKb4A1bdiU & ats = 1388351675374 & rm = 1434024b f3876eaa & zw & sz = w1254-h519])

  Please, please help if you know how to hide the bar.

  Greetings,
  Georgi

  Here's a working link to a picture of the screen problem TV and the line - https://drive.google.com/file/d/0ByZ0icaP0ZTVVlRuakRyejZwaEw3eFh1WHFzUFI5OEdSZzhn/edit?usp=sharing

• Problem with FTP

  Hello, when I opened my ReadyNas 102 today I see that the FTP has been disabled. I try to enable it, but even if I press aply to the system settings is always disabled? Why? I doing nothing! Yesterday, it works fine. I send 2 pictures to show my problem.

  

  I have Firmware 6.2.5 and static IP

  It's ok now! I do reinstall os from this page http://kb.netgear.com/app/answers/detail/a_id/22892/session/L2F2LzEvdGltZS8xNDQyNDI0NDQ1L3NpZC9kVWt3...

• Very grainy Youcam problem after "setting fix advanced dark screen" in dv7

  Hello.

  I have the YouCam came with my computer, which is a HP Pavilion dv7 Notebook PC with Windows 7 Home Premium, Service Pack 1.  Since I got it, I installed all the updates.

  I was JUST able to solve the problem of black screen that many people seem to have by changing my setting with the following fix:

  Go to "improve the current video image"

  Click on "Advanced".

  The value of 'Backlight comp' to '2' (which is max) in the "Video Proc Amp" tab

  Go to the tab "Camera control" and set "Exposure" to "-2" (which is max)

  Click Ok.  Do not hit 'apply '. It will cancel all these settings)<---Most frustrating="" thing="">

  So now, I have a picture.

  The problem that I have now, it is the image I horribly gal AND has a grainy grid pattern on everything.  Other videos of the correction, that didn't happen.

  Sample photo:

  

  Video example (YouTube):

  http://www.YouTube.com/watch?v=aNqMxaiIam0&feature=youtu.be

  BEFORE that, I was able to capture video/images that were fairly normal; No big, but normal HD.

  I want the HD-ness, I should be out a HD product I bought... :/

  HALP!  Thank you in advanced for your magnificence in advance.

  PS: I tried to 'default' everything, too. I had to do the fix to make it work well. I don't know what kind of parameters I maybe changed or not when I was trying to understand the original problem, or if there is a setting I have unintentionally has no 'by default' because I forgot...

  Hello Spennati,

  Try the steps in this link http://goo.gl/Zl7Jx

  Please let me know if it helps.

• Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

  I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

  The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

  I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

  Here's what I discovered simple troubleshooting with the screws:

  always off scroll bars

  * repaint the problem in the main window for larger then 680 pixels of window widths

  * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

  * entire window becomes disabled than 1348 pixels window width

  * can paint window minimize and restore, but only repaints only once

  * scrollbar boxes sometimes flicker in the display, but then disappear

  * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

  I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

  The attached picture shows the repaint problems and scroll bar in bad VI.

  This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

  Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

  See also this recent report of a similar problem.

• Photos from a display problem error code 0 x 80010108 CD-rom

  original title: display of pictures from a CD problem

  I tried to use Windows Photo Viewer to display photographs on a CD-ROM. CD was created in Roxio. When I tried to view the pictures I got this error message. "Error preventing photos or videos of bieng displays error code 0 x 80010108' what is wrong and what should I do to fix this?

  Hello

  1. what version of Windows is installed on your computer?

  2. have you made any recent hardware or exchange of software on your computer before this problem?

  As you use Windows Photo Viewer, copy the images to your computer and then try to view the images.
   

  Please follow the steps and links, if you use Windows Live Photo Gallery:

  Method 1:

  1. close Windows Live Photo Gallery,
  2. click on Start.
  3. click on my computer/computer,
  4 paste this address in the %userprofile%\Local Settings\Application Data\Microsoft\Windows Live Photo Gallery address field
  5. right click Pictures.pd5
  6. click on Rename
  7. to change the name of the file to OLD_Pictures.pd5
  8. open Windows Live Photo Gallery

  Now, Windows Live Photo Gallery will rebuild its database, which should stop the error you receive does not happen.

  Method 2:

  Fixed problems with Windows Live Photo Gallery that does not:

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  If the problem is not resolved, you can post your questions in the link below: http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail

  I hope this helps.

• Can't move pictures from computer to new I-Phone.

  Original title: device cannot move photos to computer again I I-Phone. Only imported phone to computter. How can I move photos to the phone?

  Can not move the photos to computer again I I-Phone. Only imported phone to computter. How can I move photos to the phone?

  Hi BillStawsky,

  1 Windows operating system you are using?

  2. what happens when you try to transfer pictures to your computer?

  3. were you able to move the pictures before without any problem?

  You can view articles from Apple support below and check if it helps:

  How to transfer or sync content to your computer

  What to do if iPod touch, original iPhone, or iPhone 3G won't transfer pictures to your computer

  Hope this information is useful.