Pierce on measures to help navigate link

Similar Questions

• Measurement Studio help

  Hey,.

  I tried to access the MeasurementStudioHelp (2012) in the menu in visual studio 2010.

  He brings me here, but the page is no longer available. She moved?

  http://msdn.Microsoft.com/query/dev10.query?AppID=Dev10IDEF1&l=en-us&k=k (FUSINGNIMSTUDIOHELP) & rd = tru...

  Im a beginner with the software NOR, so any help is appreciated

  Hi Jules,.

  It's a little tricky with Visual Studio 2010, as microsoft does not allow third parties to automatically install the help files. That means these files must be installed manually. There is a short explanation of the following link explaining how:

  Configuration of measurement Studio help in Visual Studio 2010

  http://digital.NI.com/public.nsf/allkb/8C2C52759863304D86257811007F709C?OpenDocument

  Hope this helps you.

• passing parameters between different areas to help Navigate the column

  Hi all
  
  I know I can pass parameters between the reports through a few subjects by using Url go. However, I want to keep the functionality of the menu displayed when you use defyining multi target in the s column Navigate with drop-down feature. So the problem I encountered is the sequel
  
  (1) when I set some goals to navigate - is it possible to transfer parameters to these links point to destinations? (I tried to add them at the end of the link in the field "Target", but without success)
  
  (2) or alternatively - when you use GoUrl, can I define a < would display a href link that might point to places menu and mulitple drop down?
  
  I really appreciate your help with above
  Best regards
  Wojtek
  
  Published by: user1291979 on October 7, 2009 11:51

  -without add nothing more to this link, selected GEOGRAPHY. COUNTRIES must be passed to destination and > must complete guest there? It works that way in my environment

  If you are using navigation on the current query column properties and component the dashboard then the query current source column is analyzed on the quick dash in both have SAME_TABLE. The names of SAME_COLUMN, else parameter is not parsed.

  Target: / shared/Adecco01/_portal/01 edge/weekly table dashboard
  You don't enter anything

  He must complete only the GEOGRAPHY. COUNTRIES in the reports within the area where the source report comes from?

  If you use the navigation on the properties of the column and the call to another then asks the current column is analyzed on the query target only if in the SAME_TABLE target. SAME_COLUMN value IS INVITED, another parameter is not parsed. Report of the target and the source may be on different areas but we need SAME_TABLE. Names of SAME_COLUMN.

  If you use GO URL, URL of the dashboard EDGE or the other, I already explained.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Online help the link no longer works in any of my programs. Any ideas on fixing this?

  The help on most of the Programs tab includes links to online support. It often has a link to the homepage of the software. All of a sudden these links no longer work. This seems to be true for all of my installed programs.

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. are you able to browse the internet?
  4. do you get an error message?

  In response to the questions above could help us help you better.

  Check if the problem persists in the clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Video software BlackBerry sync BB Z10 help to link - video will not play on PC

  Help, please

  I'm trying to sync my videos I recorded on my Z10 for my PC using the BB link.  All my other media files have been very well and I can see no problem.  When I go to play a video link all I get is sound, no picture.  I had this problem also when I tried to 'share' a video by email it... the person only had sound.  Don't know what to do. The video is opened on the PC using Windows Media Player.   Thanks for any help!

  No, thanks for the reply, but I was actually able to solve the problem. The video is in mp4 format, which windows player couldn't play... so I downloaded the codec to be able to see the video... or I could have just played with the quick time player. Thanks anyway

• Please, hoping to help BSOD: link to file included :) - Minidump IRQL_NOT_LESS_OR_EQUAL

  Hello world

  I have never actually solved a BSOD problem, and I hope that this will be my first time! :)

  Here is the link to my Minidump file: http://1drv.ms/1eGOvpv

  My utility BlueScreenView says that ntoskml.exe is somehow involved - but other threads on this site of questions and answers suggest that this is probably just a symptom, not the cause, of my BSOD.

  All of your help, input and advice is much appreciated!

  Jay

  Hi Patrick,

  Well, my problem is SOLVED and you played a huge role to solve.  But... it has not been resolved as we both waited.  Unfortunately, the new external hard drive enclosure did not prevent the BSOD little once the drive has been removed safely.  But! :)   Helped you eliminate so many root causes (AVG, Norton...) and you had raised the possibility of a pilot did not cooperate, so I was wondering what (s) may be involved in my external hard drive is disconnected.  By chance, when I searched on Google, I've included a search term that I never thought about you: eSATA!  My external hard drive is connected via eSATA.  So when I search Google Dell, BSOD and eSATA, I soon saw a page which seems to indicate that I should check that I had the last pilot technology Intel Rapid Storage Technology.  And sure as heck, I had not installed at all!  Then, installed this driver and - bingo! -everything works perfectly now!

  But I NEVER would have gotten there if you had not encouraged me before and help narrow my focus on the external hard drive and drivers.  Yes, thank you Patrick!  So far as I am concerned you have solved this mystery, more than any!  And I am eternally grateful!

  Jay

• Help with link to the home page

  Hello

  Can someone help me?

  I created a website and now I create a second folder / file. How can I link this second issue to the homepage in the first folder?

  Sorry for my English

  It is not quite clear whether my assumption that you are working with two. MUSE files is correct.

  However, if it is correct and that you develop both. MUSE of files and their download to host online location, so when even if you change the file names, the last download index.html file will overwrite the index.HTML of the first download.

  Something else to try is:

  • create a subdomain for the second site, it does not cost any extra.
  • Then download the second .muse to the subdomain site.

  If possible provide us with screenshots of what you're trying to reach, sometimes helps us to better understand what the problem is. You can insert them into the answers by clicking on the small camera above the text box icon.

  CARI

• Help with linking picture to a larger size

  Hello

  This may seem a stupid question, but it's something I can't understand.  When I go to a photo on my Muse Web site a link to a larger file, where can I find the address info to put in the link.  My photos are on my hard drive in photos.  What I have to put them somewhere like photo bucket or the such to get an address to put the link?  Thank you for your help.

  Kathleen

  There are a few different Muse photo gallery widgets.

  Looks like you want to use the Lightbox widget.

• Help: My links anchor stops in the middle of the browser. How to solve it?

  Hello all, I said I'm french and my English is not very good but I need your help and I will try to explain in an understandable way.

  Here's my problem, when I link a button to an anchor link and I clik top in preview mode, the link is not going to the top of the browser, but stop its scrolling smoothly in the middle of the browser.

  Anyone have a suggestion?

  Already tried to uninstall/install Muse and also tried to restart the computer.

  Thanks for your time.

  Eddy

  Thanks to those who, if he exists, who tried to solve my problem.

  Finally, I realized that the problem was that my link was the last object in my page and lower to its minimum height. So when the anchor was called, he went to the bottom of the page of links/remains blocked at the bottom of the browser (the height of the link was less at the height of the browser, so its top stopped before reaching the top of the browser...).

  To solve this problem, I just increase the minimum height of my page in page properties, so that the bottom of the page link does not stick to the bottom of the browser.

  I hope I was clear, bye

• Help put links on the spry accordion graphics

  I have a sidebar with a spry accordion. Each content area has a picture inside. I want users to be able to click on the image (after the accordion is opened to her) and a link to another page. But I can't find anyway to attach a link to the image inside the accordion. Help, please!

  Thank you.

  But I can't find anyway to attach a link to the image inside the accordion. Help, please!

  Click on in the tag in Code view, and add the link using the property inspector.

• Help with link behavior

  I am under some misunderstanding or lack of understanding about the stationary and visited link style effects. In the footer of the file which is below, I have an adverb "Legally" and an openrange-logo image. I want to both be links.

  http://www.openrangeimaging.com/test/gravity-test/index-Test01.html

  I have almost the legal link works correctly. It is the appropriate color and has no text decoration initially. Place the cursor over the link and it changes color. Click on the legal link and it opens the referenced page. The problem is that if you click on the back button of the browser the link then appears with a very small dotted border.

  Openrange-logo link does not appear correctly. It connects to the external site ok. But it seems initially with the blue border which becomes red on the bottom and the violet after the visit. I want it to appear without any border or any other effect in all States. I maybe it changes color to the overview, but for now I want to get rid of the borders.

  I think that I have the html markup incoorect but I can't figure out how. I tried a number of things without success.

  Any help with this and other comments on the code and markup of this will be very much appreciated.

  TIA

  It should be-

  an img {outline: none; border: none ;}}

  Nancy comes to typo...

• Help with links - please!

  I just started learning web design/Dreamweaver and I'm working with a site that already exists on a remote server. I set up a local folder for the site and followed the manual to the preferences. I tried to edit a link that was already up on the site (which was linked to the wrong page by the developer of the original site) and failed. The link should point to the page is already created and at the remote site. I have highlighted the text, typed the URL in the preferences box, saved the file and tested by pressing F12. The link isn't quite right (half of the text was dark blue/half color it should be), but it worked... so I proceeded to put the files online. When I went on the site the link does not work... what could be the problem?
  Help, please!

  The links have html extensions but it seems that the file names are .htm

• need help with link in #sidebar1 opened in #mainContent

  I am new to dreamweaver and the web design community so it's probably will sound like a simple enough question, but here I'm designing a page and there a containers of sidebar and maincontent footer header I want my links in #sidebar1 to open in #mainContent how can I do? I had it works fine with frames only games set the goal but framesets unprofessional aspect because they don't necessarily align smoothly so I made this new page you can look at www.czechslavnosti.com and tell me what you think that will help me. Thank you the link to the site

  In the case where someone was never interested in solving a similar problem that I ended up doing was using iframes to make this worked GREAT! see this site for more information about iframe http://www.samisite.com/test-csb2nf/id43.htm
  Good luck!

• Several small issues, no doubt easy for you, difficult for me! Help! :) link provided

  * Many thanks to KEN so far!

  Mods: can delete nicely related first post

  So here I am: SITE!
  (DW CC)

  I'm married to this model, if while I appreciate all the advice against it, I need to to its glorious end I go nuts and now a deadline.

  Here's what I messed up with for a week with little success. I really feel I have tried everything. Felt crazy several times.

  -for background images to display in their entirety! Cut, can't scroll to see all this.

  -to be able to move the white translucent content area ("blob")... but it remains right + centered vertically. Also, I'd be happy if I could just move its position on the home page.

  -for the 'blob' to stay put where I want it to be, as well as the menu and other objects

  -want each page to have its own url (/, / author, etc.), but with the sliding content blob still work (if possible)

  -for the menu to stay in place and be centered... I got close enough, but it is not perfect, and it moves also when resizing... want it fixed in one place

  -to add a slideshow on the page of the snippet (there is code for it, but I don't know if you'll be able to see it because it doesn't have its own page) I was playing with it in vain: Slideshow HTML

  I want everything must be static and functional (menu, 'blob', background) to keep a consistent look.

  I thank very you MUCH for your time guys! I need help!

  t

  -Recommendations for adding a coil simple slideshow/photo /.

  Look at jQuery Cycle2, Cycle2 demos.

  on getting the box to slide in and out at the time to choose a new menu item

  I do not recommend your site like this.  I'm not a big fan of page 1 sites.   If JavaScript is disabled, menus will not do anything, the content is not displayed.  About 5% of users have no script for security reasons. This could cause problems of great conviviality.  I think that it is better to build your site with web pages instead of 1 long AJAX/JSON driven page.   You get more traction with search engines if you have several web pages with unique page titles.   And generate traffic to websites in the search engines.

  You PM'd me on different background images.  This is easily possible using the CSS code integrated on your internal site pages and changing the property background for use to a different URL.

  Would like to know how to break the text up into columns within the content boxes
  

  Columns CSS explained:

  http://CSS-tricks.com/Almanac/properties/c/columns/

  Nancy O.

• dvSwitch need help on linking detected not to "link detected: Yes.

  Hello

  I tried to mark 'Link detected' to 'NO' on the side of the BONE, but I am not able to do. Let me give you a little background here. I've implemented 2 redhat with shared disk cluster nodes and I would like to simulate the cable pulling for training purposes.  I created 2 dvSwitches. The first dvSwitch with 1 dvUplink on vmnic4 (from 3 ESX host). The second dvSwitch with 2 dvUplink for multi-path SAN LUN (doesn't matter here).

  I tried Override and block this port that does what it says on the Tin. It blocks the port of vmnic4 for one of the node. I couldn't do a ping to the gateway of the OS. BUT (but) ethtool (from inside of the console OS) still shows as "link detected: Yes.

  I tried to remove the vmnic4 to 'manage the physical card', but the result is always the same thing with "link detected: Yes.

  I come to the conclusion that it detects the link (though no link despite the removal of the vmnic4), port group DVUplinks-315. So my question is, how do I fool the operating system to think that the cable is pulled out it's NIC.  I would really appreciate it as got really stuck at this point. Thank you very much.

  NOTE: This is only for cable pulling of exercise, it has no effect on other heuristic checks.

  Kind regards

  Christian

  So, you want the guest operating system to think that the cable has been disconnected?  On the virtual machine in question,-> to change the settings of network card, a check the box 'connected '.  The link will go down.