Pilot screen and graphic black got the message
Hi all
Ive had my PC to Office XPS 8500 for about three weeks. Ive had a few times when the screen went black for a few seconds and then come straight on with the graphics driver recovered message. Today, I reinstalled everything and Ive downloaded the ATI Radeon HD 7570 from Dell support site a couple of times. On the continuation of the investigation when I look in the event log viewer there are hundreds of error messages ATIeRecord with error 16388 attached in the application log... and it is only since this morning. There are between three and five of these errors appearing in almost every minute today. I don't know what else to do. Can anyone help?
I darednt try uninstalling and reinstalling the drivers, because I don't know what will happen as I i5 P3350P CPU so I suspect that if I uninstall I get no display at all as I do not think that this system has a backup onboard VGA graphics.
Thank you, in advance,
Rick
Yes, you can use the AMD drivers. Here's the article I was talking about. Chris explains how to uninstall a driver and install another. Pretty simple.
Tags: Dell Desktop
Similar Questions
-
Black screen and mode standby with the message "no signal".
Correctly, it's... kind of weird, I use my computer and the monitor for a year or 2 now and don't never had real problems. The thing is that when I got home last night I found my black screen and standby mode (as if the computer was turned off (which it wasn't)). I thought that the reset will solve the problem, and so I did and didn't get the message "no signal". All tried, reconnecting cables, reset several times I could count... nothing helped for awhile.
At any given time during one of my restarts it reworked all of a sudden no aparent reason. So going on my daily buissiness I want to get back in the saddle, when I accidentally hit the side of my computer with a book and the screen went to 'no signal' again. Just tried again and even used my cell phone to check if the monitor was working,... now comes the weird part,... also on my laptor monitor is having problems with "no signal", but only when I do my main screen. It works as a secondary screen, but I can't get the context in which to work. (finding that I'm guessing that this problem is not related to my normal computer, but I'm not sure).
I am running vista and got a nvidia 8800GT graphics card. Also, I noticed something that is at any time using both the hdmi cable on the graphics card or using the socket with the internal chipset of my computer makes no difference. in both cases, I get "no signal" and the screen goes to sleep... Is there someone who can help me and tell me what probably is the problem here? I'm really looking forward to the answers, thank you very much for your time and effort.
Hi Ron Suykerbuyk,
If you are comfortable, then try to remove the CPU cover and check if the graphics card is well connected to the motherboard. Even if it is connected correctly, you can try to reconnect the graphics card and check.
Hope this information is useful.
-
I need help, I downloaded windows 10 and now I get a message that my windows 7 is not genuine. How can I get rid of counterfeiting?
If you're still running Windows 7 and have not yet upgraded to Windows 10 then
Download and run the Microsoft Genuine Advantage Diagnostic Tool:
http://go.Microsoft.com/fwlink/?LinkId=52012
Post your results (copy button) and paste the results in your answer.This will help us determine what question.
J W Stuart: http://www.pagestart.com
-
MY PHONE SCREEN IS BLACK, PHONE WILL RING AND ICAN HEAR THROUGH THE MESSAGES BUT CAN NOT SEE ANYTHING AT ALL
Try this restart your iPhone, iPad or iPod touch - Apple Support
If this does not work, it may be a hardware problem.
Hope this helps, good luck to you.
-
A few days ago, I tried to upgrade Windows 7 Home Premium (64 bit) to Windows 10 using the free update. Installation hung at 84% for 2 hours, then restarted, was unable to recover the installation and then could not get back to Win 7. This left us with a black screen and a cursor of the mouse on the boot. The computer would remain in this State for about 10 minutes and then reboot and repeat.
Fortunately, or so I thought, I had a few CD Windows installation backup from the back to the era of digital river. So I thought I'd install fresh on my empty partition, copy my files and data, and then format the partition with the installation broken on.
I did, but now he tells me that my product key is not valid and cannot be activated. The product key came on a real label on the PC when we bought it.
The key is for X 16-96072. I installed X 17-58997 (Windows 7 Home Premium x 64 with SP1 (u)). I don't know what is the problem with the key? Should I have installed without the (u)?
One key 25 digits grouped in 5 sequences of 5 characters not X 17-58997.
To analyze and solve problems for Activation and Validation, we need to see a full copy of the diagnostic report produced by the MGADiag tool (download and save to the desktop -http://go.microsoft.com/fwlink/?linkid=52012 )Once downloaded, run the tool.Click on the button continue, after a short time, continue button will change to a copy button.Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message. -
Whenever I turn on my computer I got the message that C/users? Linda? AppData/Roaming? kaupe.dll is missing. I ran malwarebytes and it found nothing. How can I fix it?
May be the remains of malicious programs. Go to start/run type msconfig. Look under Startup. If this entry is here, there uncheck and then restart your computer
-
I created a new Admin account and when I went to her, I got the message:
"The service user profile Service has no logon. The user profile Service failed to load.
What's up with that?
Hello
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I just bought a version of lightroom upgrade 6 (mac, upgrade from lightroom 4) and began the process of installation, but when I entered the serial number of the previous version, I got the message "the serial number you entered is not valid. Please try again. If the problem persists, contact customer service. The number I entered is correct - I checked against the original package and on the products of my adobe account page, and I get the error message even if I try to enter the serial number of the version of lightroom 3 I had before. I am at a loss to understand what I can do: I paid for this product, but I can't install it. The only thing I can think is that the lightroom 4A was purchased from an old computer, but it has migrated successfully to my current imac, as surely, it should work.
Problem is resolved now - it's due to my misunderstanding of what was required, and enter the serial number of the previous version (as an upgrade) instead of the serial number of the version I had to buy). My apologies for my mistake and thank you for your time.
-
My computer recently crashed. A fixed it but! When I then tried to use photoshop I got the message: - message - problem with display driver, temporarily disabled the improvements. Does that mean, they will return when the problem is solved?
Update or restore your graphics driver.
-
I have received my serial number and downloaded but got this message "the signing of this file is invalid or damaged. What can I do?
redownload the file.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
No response to my problem
I have a problem with activating photoshop elements 14 upon activation of the server responses me that I am not bound. I start again and I still got the same message!
!
-
I have a subscription on Adobe cc and I instaal it on a second pc. OK, Lightroom, but failure 47 on Photoshop. I also got the message that I downloaded a trial version, but as I said I am already a customer. What should do?
Han,.
You should be able to install CC on a second computer, licensing rules allow to install on two computers.
Please first try to log out and return to: https://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
If you open an application that is part of your creative cloud membership and you see a message indicating that you are running a trial, see this link:
Creative Cloud applications unexpectedly back in the test mode. CS6, CCM
Guinot
-
Creative Cloud Desktop manager and application manager Adobe disappeared during some sort of update. Tried to uninstall and reinstall creative clouds (received the message I needed to App Manager). Tried to install App Manager (got the message, I needed creative cloud). Tried Cleanup tool for CC and CS6. Always impossible to install CC desktop manager or Adobe Applications Manager. Running on Mac, Yosemite 10.10.3.
See the link below:
-
Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud is it possible to LR5 LR6 to? Thank you very much.
Jeffrey
Yes, you can buy Lightroom without subscribing to Adobe Creative Cloud.
To purchase an upgrade to Lightroom 6 from a previous version, please see this link: products . Scroll to lightroom and click 'buy '. Then click on the selectable text next to "I want to:" and select "upgrade". In the drop-down list, select the version that you are upgrading. I hope that help.
Best regards
Guinot
-
Last night, my laptop that runs windows xp blue screened and says something about the queue
original title: help solve a mistake, please on windows xp
Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:
SC stop cisvc
SC start cisvc
Can someone tell me please how to do this? I think I know, but I'm really not sure so please help... Thank you
It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.
However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.
If you don't see an icon for the printer that you think should be there, you need to fix this. On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.
If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post. However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.
Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless. If you want to change your encryption, you would start by changing the configuration of your router from Verizon. You should be able to find detailed instructions on the Verizon support site. I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm
Maybe you are looking for
-
Update of the question on Satellite Pro L40 - 15A - old BIOS BIOS cannot recognize the EEPROM
Hello I can't Flash my bios.I have a Satellite Pro L40 - 15A. The Toshiba winflash tool provided with the bios file tells me as the "old BIOS cannot recognize EEPROM. I was recommended to use AFUDOS on another forum, but telling me that the bios has
-
cDAQ against RIO Ethernet expansion chassis
Could someone tell me if the NI 9146 Ethernet RIO expansion chassis can be used with Labview on a Windows PC without real-time or FPGA module? He would consider a network device in MAX? The cDAQ-9184 would probably my needs, but I would like the capa
-
I bought a W520 some years ago in North America and the keyboard come in the layout in English. I already intend to switch the keyboard with the Arab layout one since I'm sick of having to put stickers and their coat of all time. I also thought since
-
Help to find the FMS variable used in cartridge JavaEE to screw the CPU usage
Hello in the FMS javaEE cartridge dashboard, under the section of the JVM, there is a graph that shows the 'use of processor Threads. We would like to create a rule/alert when the CPU using this particular thread reaches a certain threshold. But we
-
How to import metadata from prelude to first use duplicate set of source files?
I'm trying to figure out if it's possible for me to work on a project with someone else in the prelude/first without us sharing the same source clips? We do not have a disk that is shared at the moment so we will have to duplicate our clips source on