Update of the question on Satellite Pro L40 - 15A - old BIOS BIOS cannot recognize the EEPROM

Similar Questions

• Satellite Pro L40 - 15A - Windows XP screen white when the cover is open

  Hey,.

  So when I closed the lid on my laptop for a while and then reopen the lid, the screen remains white (black). The only way I found to get back on the screen is to re-boot.
  In power management, I put 'Status quo' for when I close the lid on my computer and power management is ' Always on '.

  I have the latest Bios and updates to the system.

  Satellite Pro L40 - 15A
  winXP

  Any help appreciated.

  Hi ib1.

  You use the version preinstalled Windows from Toshiba or is it your own installation?

  What to update the display driver? Take a look at the Toshiba page for the new display driver:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Don t forget to look in the * archives * on Toshiba page because this model is a little older, so all of the downloads are moved in archive.

  Check this box!

• Upgrading memory on Satellite Pro L40 - 15A

  Hello

  I have the Satellite Pro L40 - 15A with 512 MB of memory (Samsung), but I'm not going to 1 GB. I have Kingston ktt667d2 / 1 g I tray to put into the two slots, but nothing works I can't spend on computer.

  But when I change to old laptop is ok. What can I do? Install special program update the BIOS, or maybe the memory stick is broken.
  Concerning

  Hello

  Safe computer laptop doesn t after upgrading memory due to these different problems;

  -memory modules are not compatible set
  -memory modules are not compatible with the laptop
  -memory modules are defective
  -a memory slots is defective

  In most cases, replace the memory module helps.

  A hint; have you tried to move the modules of memory in the slots? Sometimes it helps.
  A few weeks ago I updated my memory and safe laptop didn t.
  I thought that it s a malfunction of memory, but after the switch module Notepad started successfully.

  Good luck

• Can I upgrade the CPU T2310 Satellite Pro L40 - 15A series laptop PC?

  Hi, (I apologize if this has been asked before, but when I search 'Satellite pro l40 series' I couldn't find any relevant response)

  I've been looking around the net & found contradictory answers to this question so far, so I hope that this forum may be able to help.

  I have a 15 D portable computer Satellite pro L40 and I want to upgrade the processor Intel Pentium Dual-Core 1.46 Ghz T2310 an Intel Pentium Dual-Core T4300 2.1 GHz 1 MB 800 CPU or something similar.

  I found the following issues http://www.notebookcheck.net/Review-Toshiba-Satellite-L40-14N-Notebook.7294.0.html

  "f consider you a CPU upgrade, there is not a lot of options." The Intel GL960 value express notebook chip supports only up to FSB 533 Mhz processors. So, does not allow most of the Core 2 Duo CPU update (with 667 MHz). "

  But then, I also read that the GL960 can run 800 MHz processors?

  I also asked the question on ebay to the seller of the CPU T2310 & received this response

  «SHOULD be OK, but your T2310 533 Mhz FSB and the T4300 has 800 Mhz.»

  Motherboards intel more modern should easily accept a 800 mhz cpu, but I cannot guarantee. May be an idea to see if you can find out if there are other models of Toshiba L40, also with 800 mhz chip, because it would be a good indicator.

  And if I can't pass a T2310 because of the 800 mhz too is their a 533 mhz cpu that will be compatible & more powerful for audio production that my current Ghz CPU T2310 1.46.

  I've only had this PC 4 years again, it seems not to be very mobile friendly if this resource could not be designed to handle upgrades.

  Thanks for the tips.

  Post edited by: ib1

  Problem is that upgrading the CPU is not taken in charge and everything you do is at your own risk.
  See also http://aps2.toshiba-tro.de/kb0/TSB9401AX0001R01.htm

• Satellite Pro L40 PSL43E - need Bios for Win XP

  Need Bios Update for Windows XP to my laptop Satellite Pro L40 PSL43E

  Ty

  It seems that the BIOS and other XP drivers for this laptop series don t exist on the European driver Toshiba page. Maybe later I would recommend visiting the page from time to time to check if the XP drivers and utilities have been released

  Hey Buddy

• Satellite Pro L40-15 a (PSL4BE) BIOS update procedure

  Hi, since trying to update the BIOS from Windows using the package provided on the official page to download always translated by the + black screen problem + described [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=47887&tstart=0], which is the * correct * on how to update the BIOS on this laptop?

  I am no newbie: with these laptops, this is the first and only 2 has no BIOS updates, more than 100 + modernization successful in my career!

  Here, I sketch the history with the my two Satellite Pro L40 - 15A (PSL4BE).

  Cell phone 1:
  a. BIOS 1.60
  b. upgrading to Windows * XP * to 5.50 _For Windows XP_
  c. programme stop the PC from the start, with a progress remains empty bar!
  d. first boot in the BIOS showing version 5.50 (!), but then: dead (black screen)
  e. taken for an ASP.
  f. after 15 minutes and for as little as 35 it has been resolved, and BIOS updated to 2.00
  g. explanation of the ASP guy was it was my fault, because since the laptop is with Vista installed, I couldn't do a upgrade the BIOS of XP!
  h. sold the laptop with BIOS 2.00

  Laptop 2:
  a. BIOS 1.60
  b. upgrade of Windows * Vista * to 2,00 _For Windows Vista_
  c. programme stop the PC from the start, with a progress remains empty bar!
  d. but the laptop still and always boots with BIOS 1.60.
  e. upgrade to Windows * XP * at 5.50 _For Windows XP_ (I know, I was really looking for troubles, uh?)
  f. first boot in the BIOS showing version 5.50 (!), but then: dead (black screen) (as 1 laptop)
  g. tried every combination of secret keys, CD, USB, floppy drive, but nothing could do the trick to force a BIOS loading, as the ASP was indeed able to do with my laptop 1!
  h. read 'notuagain' contribution to the forum thread [here | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=47887&tstart=0], and it worked.
  i. but now, the laptop still has BIOS 1.60

  Any ideas out there?
  Thank you

  Hello

  Here you can find the traditional versions of updated BIOS for this laptop model:
  http://rapidshare.com/files/415039398/BIOS-2.0-psl4be-Vista.zip.html
  http://rapidshare.com/files/415039409/BIOS-5.5-psl4be-XP.zip.html

  So you can update the BIOS using a USB bootable or external USB FDD drive.

  > AFUDOS (of an old DOS 6.22 boot disk, with new AFUDOS.) EXE from the site) does not either, he said: he can't erase the flash00000...
  http://www.Softpedia.com/get/system/hard-disk-utils/HP-USB-disk-storage-format-tool.shtml

• Installation of WXP Pro on Satellite Pro L40-15 has

  Hello

  Just got a Satellite Pro L40 - 15A, its currently got vista home on that and I'll have a go at put WXP Pro on it. Anyone who has tried this? First thing that I'm doing, is integrate the SATA drivers in Windows XP Home edition with nlite. Got Intel Matrix storage drivers which I assume are the right ones. One else you have that works? Also, I've seen there are a few updates to the BIOS, anyone put these yet? Are these worth it, updated the BIOS always makes me nervous!

  See you soon

  Cat scrap

  Hello

  It doesn´t matter which model, because you can use the users for EACH model installation instructions. So, just pick up all the necessary drivers and install XP as the guy described it.
  I did it on a Satellite A100 and it works like a charm. :)

  Welcome them

• Re: Satellite Pro L40 - killed the laptop BIOS update

  Recently I thought it would be better to download the latest drivers and upgrades for my Satellite pro L40 to keep up-to-date and partners the laptop that works smoothly. I couldn't have worse summer. Before I updated the new driver updates I thought it would be a good idea first update the Bios. So I downloaded the update of the Bios on the Toshiba site, unzipped the files and followed the online instructions for updating the BIOS. I double clicked on the BIOS file to run the update, the laptop says it was end the session, I waited and the Toshiba logo screen came. In the instructions, it says that I have to press F2 now and confirm that the date and time are correct. I should then press F9 to load all the default values and then press F10 to save and exit. At this point, the laptop must away to the loading screen, but... I got a black screen. IV turned off the computer and turn it back on, but still, I get a blank screen. The lights are on but know one's home.

  Could a mod/staff/Board Toshiba administrator please explain to me why I'm going to draw the consequences of my lack full on my face because I followed a form of direct teaching of personnel of Toshiba or... Please run me through the process of bring back my cell partners in life, before that I get my Crown snatched jewels. This isn't a laugh. An upgrade directly from the manufacturer is not intended to cause you problems!

  Please get back to me as soon as POSSIBLE. My first son moments of life (videos, photos) are on this laptop. That cannot be replaced. Please tell me that the laptop can be fixed...

  Hello Durks

  I'm really sorry to hear you I have this problem.
  To be honest, it is not easy to discuss about this because a lot of people on this forum with a similar or same problem reacts quite aggressive if they don t hear exactly the thing they want to hear.

  In any case, I just want to write my comment. Don t be worried about photos and other important data. You can remove the laptop HARD drive, put it in a small box of HDD SATA 2.5 and connect the HARD drive to the other PC / laptop as external device. You will have full access to all stored data. So you can do the backup.

  Update the BIOS.
  What to say at this point?
  I have checked the Toshiba download page and saw that the BIOS update is available for Windows XP Home edition and Vista pre-installed notebooks so I hope you ve chosen the right one. Anyway, it is not easy to fix screwed up in the BIOS. You hate me now, but I think you should contact the nearest Toshiba service provider and ask for help. Call them, explain the situation and ask what you can do about it.

  I hope you will fix this laptop soon.

  Good luck.

• Question about the files to be transferred on the Satellite Pro L40

  I have a portable Satellite Pro L40 and bought a upgrade disk to upgrade Vista Home Basic to Vista Home Premium.
  But I can not install the upgrade because drive C is showing that only have 8 GB of space.
  Drive E has 30G of space, but I can't transfer files from C to E to free up enough space.

  Please can someone tell me how to transfer files from C to E?

  I can ask the same thing as Akuma - why can you transfer files from C to E of t?

  Open two windows in the Windows Explorer. On the left side of the C drive on the right side of drive E.
  Mark all the files on the left side and move them to the right window. When you do with the key right mouse options will be displayed. Choose the MOVE option and I hope that the adaptation procedure will be launched.

  Have you ever tried to do this?
  An error message appears on the screen?

  Question sorry but described is completely illogical.

• Satellite Pro L40 - after I start the update of the BIOS, nothing happens

  I'm trying to update my BIOS version 2.00 - WIN for Satellite Pro L40 PSL4BE.
  My OS is Vista 64 bit.

  I downloaded the file and run the .exe but nothing happens.

  I also tried to copy the files on a diskette and start with a floppy disk, however, I get an error message saying to remove the diskette in the drive on startup. Any help please?

  First update the BIOS for Satellite Pro L40 is based on Windows it of possible to update in DOS mode.

  Also, I checked the Web from Toshiba site and I can only find a BIOS for Windows XP and Windows Vista 32-bit.
  It seems that the update of the BIOS is not supported for Vista 64-bit.

  If you want to update, you need to change to 32 bit Vista or XP. Then you can update the BIOS.
  Don t forget this version 2.00 - WIN is for Vista 32 bit and 5.50 - WIN XP.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Satellite Pro L40 - 17F: everything by playing the DVD player window flickers

  I have a new Toshiba Satellite Pro L40 - 17F with all the updates of Windows Vista (Home) applied. This includes those optional (for example driver updates)

  I came to be used for the first time (outside the application of windows update) and play a movie. The player (not the controls, just the player) window flashing continuously, even on the menu screens. It almost seems that the film was shot with an old film camera and is played on a projector.

  I have not really looked at it properly yet, but I wonder if this is a common problem...

  Someone at - he had the same thing? What about a solution?

  See you soon

  Not easy to say that this could be what software do you use?
  Have you tried different players? If this is not the case, check this box!

  Have you noticed this problem only play DVDs using the DVD player?

• Satellite Pro L40 - how to enable the WLan using ConfigFree

  Can you help me?

  My English is bad I do not end.

  The question is:
  My computer is a Toshiba Satellite Pro L40 and I use the ConfigFree for the wireless, but it seems that the WiFi network is disabled.

  Help please!
  I want to know what's wrong

  Thank you!!

  Hello!

  Your wireless network card is recognized correctly in the Device Manager, or you may notice a yellow exclamation?
  Her check first because otherwise, you can get the WLAN to work.

  In addition, you can activate WLAN with the material on the laptop switch which must be set on and the FN + F8 key combination.
  Check it!

  After this Free Config should find your WLAN router if you are in the range of that.

  Good bye

• Question about hard drive storage on Satellite Pro L40

  I have a Satellite Pro L40. Memory hard drive seems to be divided into two (about 35 GB each) under Vista C and e of data.
  Vista C is almost full. How can I use/access the E-data memory?

  Hi Bart

  Please don't get me wrong, but your question is really strange. I mean after reading your post, I'm really interested in your PC knowledge and how long you use your laptop.

  You want to know is basic stuff and must be learned first when you start using computers.
  When you have the time to try to get some book on WXP or Vista and all know about operating systems and how to use them.

  Open Windows Explorer, and you will have direct access to the second partition. You can move files from C to D, or save all data directly on the D partition.

  Google a bit. You can find many Web pages on basic stuff to the use of operating system.

• Satellite Pro L40 - after upgrade to Windows 7, the FN keys do not work

  Hello world

  I have a Satellite Pro L40 PSL4BE and have just upgraded to Windows 7. Since the upgrade I can no longer use the function key and the top and down arrows to control the volume. Keys F6 F7 & still control the brightness so I don't know the function key still works.

  Anyone know if it is a driver problem or nobody knows how to solve this problem?

  Thank you

  Drew.

  Hello

  You need to install the package of value added for Satellite Pro L40. This package contains all the necessary drivers for the FN keys. Then please install or update VAP if you have already installed an earlier version.
  Here you can download: http://eu.computers.toshiba-europe.com > support & downloads > download drivers

  Can you confirm that FN keys work with installed VAP?