Pilots and S/W for PCI-6533

Similar Questions

• Laptop HP 15-ac118tu: pilot unavilable for PCI Data Acquisition and Signal Processing controller

  Hello

  I use Windows 7 Ultimate Hp Notebook model ac118tu. In Device Manager, it shows the yellow mark to the Acquisition of ICP data and Signal Processing controller (the name that appears twice).  What is the use of this controller?

  Yellow mark means that I need to install the driver for this. Please share the link to the installation of this driver.

  Secondly, I want the drivers for the webcam as well. Please share.

  Hello:

  You need the driver for this device...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  For the webcam you just install this software.

  This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.

  File name: sp71830.exe

• HP 240 G4-328TX: need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Hello

  Need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Can anyone provide me please the link for download it for windows 10

  Thank you

  Hello:

  See if this driver works...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609938 & swItemId = ob_153701_1 & swEnvOid = 4192

• can't get the driver for pci device and sm bus controller

  I have a hp laptop pavilion g6-2101tx. I recently installed the 64-bit windows 7 and I do not know what is the driver to install for pci device and sm bus controller.

  The Id of your drivers are as follows

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1840103C & REV_01

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1840103C & REV_04

  Please suggest me that I have to download the driver...

  Please do help me...

  Hello:

  Here are links to the drivers you need.

  Install the driver first chipset (which in the future, you must install before installing any other driver).

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-103010-1&CC=US&DLC=en&LC=en&os=4063&Product=5269654&sw_lang=

  Then this driver will install the card reader.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-102497-1&CC=US&DLC=en&LC=en&os=4063&Product=5269654&sw_lang=

• BIOS and drivers required for CQ45-106AU for OS Windows XP or Free DOS

  Hello, I bought laptop Compaq CQ45-106AU which has Windows Vista Home Basic OS and I am unable to find the BIOS of motherboard, Chipset drivers and all drivers for this perticular computer laptop, I want this downgrade to Windows XP Pro or I want to to Free DOS so if anyone has the solution to this then please send me information as soon as possible. Thanks in advance to all who pass by this message.

  I recommend you stay with VISTA.

  This chip Audio IDT using model and ENE CIR receiver driver XP were hard to find.

  ENE CIR is essential if you have purchased the remote for this model.

  Some of the user CQ45 found they will lose control of BRIGHTNESS setting (Fn + F7 and F8) due to the incompatibility of the QLB software.

  However, if XP is essential for your applications please perform steps below.

  ____

  Your model must sata driver AMD sliptreamed on XP installation CD.

  If you did it right, you'll BSOD error.

  Use Nlite to slipstream sata driver AMD.
  A good guide for driver sata sliptream, here

  Note: Do NOT use this guide sata driver, your sata driver is given below.

  AMD SATA AHCI Controller Pilot, here

  or

  If you want an AMD SATA driver from HP site, here

  extract sp39719 to a folder and use the files in the RAID7xx folder

  Note:

  Select ONLY x 86 AMD SATA AHCI driver

  Download nLite , here

  Make your Vista recovery cd/DVDs if you have not yet discovered it here

  _____

  Try the following drivers,

  Drivers XP for CQ45-106AU

  Install .net Framework before the others, here

  Suite software Catalyst (for your Chipset ATI, HD 3200 Graphics/video and LAN drivers here

  Audio installation is the most difficult part, since the BIOS incompatibility.

  Install MS-SAU first, here

  IDT High-Definition Audio CODEC Pilot,

  a version update of Microsoft Update Catalog here

  or

  or if you want to install HP IDT driver (VISTA), here , some user indicated that it also works with XP

  or try the new version here

  Note:

  Some users CQ40 CQ45 must update their BIOS to fix Audio that disappeared after rebort.

  If you have found your BIOS is lower than F33A, update your BIOS to the latest version here

  High-Definition Audio (HDA) Modem Install drivers, here

  Broadcom Wireless, here

  Realtek RTL8102E Family PCI - E Fast Ethernet NIC, here

  JMB38X card reader Host controller driver, here

  ENE CIR Receiver (your Vista driver), here

  or if it doesn't work try Vista driver checked Intel, here

  HDMI Audio, here

  ALPS Touchpad Pilot, here

  HP Quick Launch buttons, here

  If you have Bluetooth, here

  If you had for 7 unknown devices (buttons drivers), here

  Installation-> right click machine.inf, choose install.

  Good luck

  Message edited by Mariza on 04/01/2009 12:11 AM

• Maximum latency to read/write for PCI-DIO-32HS with NOR-DAQmx?

  I was asked to evaluate using the PCI-DIO-32HS and NOR-DAQmx on MacOS X to essentially close a control loop.  My first concern is whether or not it can run fast enough.

  So my questions are: what is the maximum latency from the moment of receiving a signal strobe reading data from external hardware, then read a single 16-bit sample and sending it upward by NOR-DAQ to a user space application?  And, similarly, what is the maximum latency of sending a unique 16-bit value from a space application user down through NOR-DAQ, then write a port and affirming a strobe signal of external-data writing material?

  Thank you.

  Hi AliasMe,

  Thanks for posting and welcome to the Forums EITHER!

  Do you need to process the data in the software and generate a value on this basis?  DIO-32HS (alias PCI-6533) offers in the buffer of inputs and outputs, but you'd have a latency in your control system relying on the OS to do treatment.  Since this period is dependent on the system, I can't give a specification for the amount of time it would take.  However, integrating data in memory, processing and writing back to the card would likely be on the order of several milliseconds.

  Generally, we recommend FPGA in situations of control like this, so you can do all the processing in hardware.  However, if provide you more details on your request we can look into all the options available.

  -John

• Satellite Pro A200 - 1 MI - need driver for PCI memory controller

  I have the Toshiba Satellite Pro A200-1 MI (PSAE7E) having a problem with the PCI memory controller on my laptop.
  When I go to Device Manager it shows the question mark in the tab other devices and when I go, it is yellow? (question mark) and! (typical brand) to the PCI memory controller. I took and downloaded all the drivers of your site:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  for XP, but I'm not sure what kind of driver do I need to install for PCI controller memory, it is driver bios or something else? I just need to know what to install to overcome this problem with my device manager and the PCI memory controller.
  Thanks in advance!

  Hello akibono

  I imagine that you have installed Windows XP Home clean on your laptop and now you want to install all the drivers, tools and utilities. Am I right about that?

  In any case, after the installation of Windows XP Home edition you install all the drivers, tools and utilities in the order of the specific facilities. After doing this, everything should be OK and every hardware component will be correctly configured.
  Please install all the stuff as follows:
  WINDOWS XP HOME EDITION
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Storage Manager
  LAN driver
  Touchpad driver
  WLAN driver
  Toshiba Assist
  Flash Media driver
  Driver webcam
  Hardware configuration
  Controls
  And so on

  I hope that everything will be OK.

• Pavilion g6-1108er: software and driver results for: HP Pavilion g6-1108er Notebook PC

  Software and driver results for: HP Pavilion g6-1108er Notebook PC http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g6-1100-Notebook-PC-series/5082224/model...

  not download the driver on my laptop.

  We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page. (c)

  Where can I get the drivers?

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• Need to Win 64-bit XP to fingerprints digital and modem driver for Tecra A9-s9016x

  I installed a Windows XP x 64 system in a Tecra A9-s9016x model and I can't get the fingerprint and intall correctly for modem drivers.
  I need these two pilots and were unable to bring them into the Toshiba support page.

  Any ideas where I can get the drivers?

  You won't find these drivers.

  The 64-bit of Windows XP was not so popular like Win XP 32 bit and the drivers have not been released by Toshiba.
  In some cases, the 32-bit drivers running on 64 bit OS, but if you have already tried to install Win XP32bit driver and if it didn't work then I doubt that your will be able to get this running devices.

• Need driver for PCI-Kommunicationscontroller

  Hi again

  I reinstalled windows 7 and need a driver for PCI-Kommunicationscontroller.

  Any idea, please

  Hello

  Please, try to download and install:

  http://www.DriverCure.com/driver/driver_captcha.php?device_driver_id=5CFDA707-11B0-4FEC-8C89-65E3E4EA9AFD

• Support for PCIe storage

  Are they compatible? If so, which would you recommend?
  I'm under S30 with Windows 7.

  Official support for PCIe SSD didn't happen until the P500/700/900 series. However, PCIe SSD will work on the S30, albeit without bootable media.

  Since no hard drive have been officially qualified, should really a specific recommendation here. Many AHCI or NVMe with SSD should work without much effort, although anything NVMe will need a driver. My personal choice would go to Samsung or Intel, as I've had the most experience with them. Samsung can be done via PCIe cards m2 and Intel has some native PCIe solutions.

  What are your needs here? What volume of storage and what is your purpose of speed? Knowing that might help to point you in the right direction.

• SMBus and usb drivers for Pavilion P6-2312ea running Win 7 x 64 3

  Hello

  My step daughter has finally threw his arms up in the air and agreed that win 8 is more pain on a desktop that is worthwhile and is not for her.

  We have installed Windows 7 64 bit and are now just trying to find the compatible drivers for SM Bus controller and usb 3.0.

  I'm assuming that the drivers for usb 3.0 as the keyboard and mouse are ok, just the 2 front usb 3.0 do not work (although that seemed to have given up after a week).

  We executed the 'original' pilots when he was running Win 8 x 64, but they don't seem to have. Maybe a compatibility problem, can be me as it was very early this morning when I gave up for a while.

  Any help/pointers gratefully received

  TIA

  Elmer

  Hello

  Please check the following post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-e-g-Windows-8-software-recovery/SM-bus-controller-and-USB-controller-drivers-for-Pavilion-P6/TD-p/2814635

  Kind regards.

• 2220us G7: drivers for pci device G7 2220us - windows 7 64

  Decommissioning of the os from windows 8 for windows 7 64 and I lack of drivers. HP do not support win7 for this laptop G7 2220us

  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_184B103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  Missing drivers for PCI device please help!

  Hello:

  You should be able to use all the W7 x 64 drivers and software the g7z-2100 on your model, except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G7-2100-notebook-PC-series/5262610/model/5275620

  You need the driver for the hardware ID you have posted.

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56467.exe

• Driver missing for PCI Simple Communications Controller for U41

  I have a problem with a driver for PCI Simple Communications Controller for U41. Please help for the best solution thanks

  Good day and welcome to the community.

  This is usually resolved by installing the Intel Management Engine Interface package.

  Please take a look at the pages of resources of your machine, under the section of Chipset :

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/u-series/U41-70

  I don't know if there are also the Serial i/o package.

  I hope this helps a little.

  Kind regards.

• Video card (and others) upgrades for a HP Pavilion Elite HPE-510 t

  Hello... First of all, I just want to say that these forums have been an invaluable resource for me in my quest to upgrade my current PC. A lot of good answers and always at the top of the Google search results, you guys have been so super helpful. Without a doubt a very different experience from what I got when I bought my PC from a company that rhymes with 'hell '.

  I have a few specific questions, however, and thought I'd throw them to let experts weigh... For the record, I have a HP Pavilion Elite HPE - 510 t with all parts except for the video card, which is currently an ATI over-pants v4800. I am running three monitors 20 "(1 DVI and Display Port 2 at present, but who can be flexible). Also, I don't a few moderate games (FPS, MMO) and watch a lot of Netflix...

  1. I'm certainly looking to update my video card, but I do not know what actually fits. I'm ready to upgrade the PSU as well (probably to the Corsair CX-600 recommended elsewhere on this forum), so power should not be a problem. And money is not a huge problem either, as long as the card is less than $500 or more. I've been watching some of the newer cards (like a 680 GTX or even the new 770), but I'm afraid that they will not physically fit in the case, or will be not compatible with the motherboard (which seems to be the PCIe 1.0? Or I read wrong?). So basically, my ultimate question is: what is the best possible graphics card given my case current and potentially put to level power supply, motherboard, I could use? If it's important, SLI is feasible but not more.

  2. I also intend to add additional RAM. The page on the card to my PC to the HP support Site says it takes DDR3 1600 PC3 10600, but everything that I find these days in the RAM is DDR 3 1600 PC3 12800. My mother/PC card will support the 12800 or do I have to keep hunting to find 10600 sticks?

  3. and finally, I'll also put in a Pro 840 Samsung SSD. Do you know if the motherboard compatible with the SATA connectors suitable for speeds of 6 GB? Just plug page says "SATA" and does not specify a version.

  Any help you could give me on these questions would be greatly appreciated. This computer has served me well for a few years now, and I'm hoping to keep it for a few more years. Thanks in advance and have a nice day...

  Aaron

  Here are the specifications of plant origin and configurable options for your desktop HP Pavilion Elite HPE - 510 t CTO and here are the specs of his card mother IPISB-CH (Cleveland). According to the specifications, the motherboard uses the Chipset Intel H67 Express that supports an extension v2.0 x 16 PCIe and 3Gbs SATAII (SATA2).

  (1) SLI is not "feasible", so no need to go there. GeForce GTX 680 cards are going to be long, perhaps too long. You need to measure the space available at the back of the case more further along the x 16 PCIe slot to determine what can be installed. You will need to resign it a notch or two... until you find one that matches. The CX600 Corsair is a great choice and fits, even if you can buy the place CX600M. The CX600M is modular and allows much better management of the cables and so the potential for a better air circulation.

  (2) with regard to memory, the State of the plug;

  Four DIMM DDR3 240-pin connectors
  Supports the PC3 10600 connectors DIMM DDR3 (1333 MHz)
  Memory non - ECC, unbuffered

  Then, two sets of most of these (2 x 4 GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Kits should do the trick. You can also go to the website Crucial.com and use two of their 'guaranteed compatible memory upgrade'.

  (3) your computer supports speeds SATAII (3Gbs) and this is the best it will do. However, the SATA connector is identical to what is found on a SSD SATAIII and it should be compatible with your computer.

  Please send BRAVO