iOS 10.0.2 Bluetooth questions

Similar Questions

• iOS 10.0.2 bluetooth bug

  After having updated my iphone SE iOS 10.0.2, Bluetooth still does not work properly. The phone pairs with my car and immediately implements a connection as if from a call. Turn off bluetooth on the phone (and back) does not solve the problem. It is sometimes help to turn the phone off and back on again.

  When can I expect a decent correction?

  Try these general steps. They could help.

  1 reset your iPhone by pressing and holding the sleep/wake and home buttons.

  2 disconnect you from your iCloud account and reconnect again.

• problems with update iOS 9.3 car bluetooth

  problems with update iOS 9.3 car bluetooth. break and cannot hear the caller voice calls.

  In what seems to be the same problem, this AM. iPhone 6, iOS 9.3, its stock of 2012 Honda Odyssey system. Worked well with iOS 9.1. With iOS 9.2 bluetooth would be occasionally disconnect, then reconnect about 5-10 seconds later. Reset all the settings bluetooth both phone and car with no improvement.

  IOS installed 9.3 last night. Phone connects, but the audio is unintelligible. Sound cut about every quarter of second, then reductions for about a quarter of a second, ad nauseam. Reset the phone without effect. Will try other things later today, but the phone is unusable with bluetooth, as is.

• iOS 9.3.1 bluetooth problems?

  I just updated my iPhone to iOS 9.3.1 6 my Garmin Fenix 3 now does not connect and similar questions in my car and bluetooth speakers. I have reset the settings network without success. I did a reset software on the phone and 'forgotten device' and tried to re - associate once more with no luck. The devices are now not appear as visible on the device.

  Does anyone else know bluetooth issues with iOS 9.3.1

  I have problems with my Garmin Vívosmart since 9.3.1 has been installed, in order to have same question as you have described. The Garmin connects very well with my iPad (9.2.1).

• iOS 10 people record problem/question

  Hello

  I have a couple of "faces" in the issue of people who are coming in white, but acknowledged same 'face' of many times.  Is anyway to update it for photo comes actually?  At a few faces, I don't know that facial recognition found since it is coming from white.

  Hi JohnP007,

  Congratulations on your iPhone 7 more running iOS 10! I understand that some of your faces in the album of people pull up as a draft and you want to refresh. You can try to use the steps below to fix the faces on the thumbnails in albums.
  

  Difficulty faces and names mixed-up

  If you notice that there is a photo of someone in a collection that is poorly identified, you can remove it.

  1. Tap the person you want to remove in the album of people > select.
  2. Type Show done face to emphasize his face in every photo.
  3. Press on each photo that is not the person.
  4. Type > not this person.

  Hide people

  You can hide the people or groups that you don't want in your album of people.

  1. Open the album people and press Select.
  2. Touch the people you don't want to see.
  3. Click Hide.

  If you want to see the people that you have hidden, press on show hidden people.

  People in the Photos on your iPhone, iPad or iPod touch

  This should be corrected without delay faces. Please use the Apple Support communities to post your question. Good day.

• 10 IOS leading to the Bluetooth problem

  Before download IOS 10, I've never known a Bluetooth problem when using my Ford truck.

  Now, when I get a call, the caller does not hear me and I can't hear the caller. If I have my phone in hand and I change the Bluetooth audio to the speaker of the iPhone or handheld and then change it back to my truck, it works very well.

  When I call my truck, using Bluetooth, all parties can hear one another, but incoming calls only on me.

  I tried to reset the network settings, non-couplage coupling phone/truck and restart the phone. Restarting seems to work for the next incoming call, and then it starts again.

  Any help would be great. I received an incoming call on my phone about 10 minutes before you download the update of IOS. The following call (update to the post), the problem is presented.

  Thank you.

  Try to get help from this article, get help to connect an accessory with your iPad, iPhone or iPod touch - Apple Support Bluetooth

• iOS 9.3.5 bluetooth does not

  I have a new (refurb) iPhone more 6s with iOS 9.3.5.  Bluetooth doesn't seem to work.  When you try to pair with devices the cursor just turns and turns and the phone can never find anything.  I tried a beef of impulse, a jbl speaker and tried to use airdrop.  Is there anything I can try to solve this problem?  Looking for an answer seems to indicate a problem with the update of iOS, but I can't find any solution

  Try to hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If that doesn't help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the data if possible. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

  If the steps above do not help, you may need to test in an Apple store.

• Problem with the Honda CRV and IOS 9.3.1 Bluetooth

  I just bought an IPhone more than 6 s and connected to my Bluetooth CRV Honda's.  No issues yesterday, but today it is really strange.  When my phone connects with the Bluetooth car on car monitor, that he acts like he's trying to call my phone.  However on my phone it shows not everything what is happening.  It displays the button in the car to disconnect the monitor from the car, but none of the logout buttons work.  It is just like that on the monitor.  The only way to get this removed from the screen of the car is to cut the Bluetooth phone.  That defeats the purpose of having the connection car Bluetooth. Mathilde be an IOS 9.3.1 deliver it worked fine in my iPhone 6 and the prevoous IOS and it worked the first day of my connection!  How can I fix?

  Others with Honda CRV have reported similar problems recently and not solution

  See outside the forum here

  http://www.autoconnectedcar.com/2015/09/why-Bluetooth-iOS-9-issues-with-iPhones-4s55s5s6s-fewer-than-IOS-8-in-cars-but-could-cause-problems/

  http://www.gowildehonda.com/Honda-Bluetooth-how-to/2016-CRV.htm

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• iPad/Logitech bluetooth questions

  1. a week old iPad 2 Air (iOS 9.2) and Type of Logitech + cover/keyboard. Set up the iPad, Bluetooth Logitech keyboard and everything was fine. Connected to iTunes and right after... on the iPad, the password lock screen 6 modified (specifically choose temp unforgettable number)

  2. called Apple Support, asked to reset the settings, re - up everything, didn't work, second attempt to restore the settings of network, or lives / versa, then went to configure everything at again and still no luck.

  3. reviewing the Logitech support pages both Apple until my eyes started to bleed and 'nada '!

  4. last attempt with a "fork it attitude" and merely an attempt to connect keyboard JUST to iTunes (as suggested in support of Logitech) and still once, after which follows the steps still not able to link pad keys via Bluetooth. (although in total honesty, never had the time to fully explore iTunes due lack of interest for Windows 8).

  5. a lot of people on the comment for the Logitech support site is complaint of interference of the Wi - Fi just makes that and Support Tech at Logitech States that multiple Wi - Fi could cause this. Close all except iPad and keyboard and no change.

  6. I have two last thoughts, there is a tab that I've set wrong on iPad (doubt since reset) or possible interference with a Comcast Internet connection due to phone, pad, smart tv.

  7. final consideration: Comcast equipment has two network connections, although according to the tech that installed 9 months ago, said that very few things will work on it because it was something to future 'something' catch up.

  Anyone have any ideas?

  You've lost a little me to step "connect the keyboard to iTunes. How did you do that?

  Bluetooth is a thing of communication without wire, but at a different wavelength than wifi, so interference should not be a problem.

  What happens when you try to pair the keyboard and iPad? They see each other?

• C2Y65AV dv7 Bluetooth question WANT after the victory of 8.1 to Win 7 Downgrade

  My laptop is an ENVYdv7 C2Y65AV

  He came originally with Windows 8.0, and I later upgraded to 8.1.

  I never liked 8.0 or 8.1 so I "had" to Windows 7 Professional. I did my research, realizing that there may be questions. I downloaded the drivers, bought a new drive hard, etc..

  Everything went past better than expected and I'm happy with the "downgrade", except for 1 issue.

  1. I have difficulties to get my Bluetooth to connect completely to one of my devices (headset or headset).
  My WiFi works well, I think the Bluetooth 4.0 is part of the Intel Centrino WiFi card. When connecting to any Bluetooth device, it appears in the Bluetooth devices screen. It will discover and 'connect', but nothing happens when I try to use them. The sound always comes through the laptop speakers.

  I have the Intel Centrino Wireless N 2230 BNHMW came with the laptop. It worked fine with Windows 8.1. All my devices Bluetooth paired easily with the laptop when Windows 8.1 is running.

  I went to the Intel Web site, made sure my driver for the wireless card for Windows 7 is the most recent and correct version. They have a software utility that installs on your laptop, then search and download the last correct version.

  I downloaded all the drivers for this HP downgrade, driver and software help section () of the Internet site. What great resource is this site!

  Suggestions? Advice?
  I appreciate any help!

  Thank you
  James

  P. S.

  One interesting thing about Windows 8.1.

  When I installed Windows 7 Professional, I bought a new hard drive SSD just for that purpose. I had saved my hard drive took a shot with 8.1 Windows on it just in case this downgrade are successful.

  Just for grins, I added it as a second hard disk (later) in the case where I needed to get the missed files.

  When I restarted my laptop, I went into the Manager startup and selected my main drive with Windows 7. It started normally.

  Then the seconds after startup, a message pops up saying that I had to reboot for the changes to take effect. I don't remember making some, but thought that something was updated?

  So I did. I rebooted and Windows 8.1 supports and edit files on my hard drive SSD (disk win 7) which ultimately disabled the Windows 7 boot disk.
  Attempt to start the hard disk Windows 7 has frozen just after the start of Windows 7 screen.

  I pulled the plug on the rebooted Windows 8.1 to Windows 7 hard disk. Before I could however, he had to scan the hard disk for changes and correct. Then Windows 7 booted up normally.

  This Windows 8.1 is of course control. Can you say 'Hal' from the film '2001 A Space Odessay'

  Hello

  The 2230 Intel chip is crap. I suggest to get decent bth less Intel 6235 or 7260AC to get a connection. The 2230 provokes many questions it is better to get rid of and use a correct wifi card.

  See how to change the order of boot on Windows 8 laptops:

  http://superuser.com/questions/663733/Windows-Boot-Manager-and-two-hard-disks

• Navigation/Bluetooth question.

  I finally had time to try the navigation today. Everything worked OK, but it was hard to hear so I have a few questions. (1) I did not hear the voice directions through my bluetooth earpeice although this arrangement has worked well for the functions of the phone. I can do the voice directions come through bluetooth? (2) if I plugged the Droid to MP3 (to the) connection of the car radio, would voice music interrupt directions & come through speakers? (3) if I had music on Droid & played it with earphones (jack Bluetooth or audio) would have voice directions override & stop the music when it is necessary? Last question is off topic. Does anyone know of a car charger which has an angle of 90 degrees on the taken micro USB. Since the Droid car holder does not a plug in connection, I do not have the lead from charger to the bottom of the phone. I guess an extension USB microphone with a 90 degree to the input end would do the trick, or maybe someone knows a 90 degree adapter? Thanks in advance.

  Not all the headphones blue tooth will receive all the signals... There are two types, and the called A2DP, one is basically the one who receives the voice of your calls, but also of other sounds on your phone.  If you don't see anything on your helmet, a quick way to see is to go to youtube on your phone and try to play a video. If the sound comes through your bluetooth headset, then navigation does not work properly, but I think you will find that your helmet does not pick up the sound, as there are has that one or two headsets bluetooth single ear that are A2DP.  If you hear the sound from the speaker on your phone, it simply means that the helmet only works for voice calls.

• IOS based App clock alarm question

  The beginning of alarm when you use iPhone at the same time, the alarm 'repeated' down turn when you press OK. This cause of evil that I only expect it to be off before today and continue the next day. (This is not the case when press OK on the lock screen)

  It is originally wrong, can anyone help?

  I know right I understand your question. If I understand correctly, you have trouble to set an alarm, repetitive - right? Where is it you press OK? Have you checked to see if you have enabled snooze. How do you turn off the alarm when it fires?

• iPhone bluetooth questions

  My iPhone 6 does not display my colorlink Bose speakers, although he has done in the past.  I cut and restarted without change.  He said that actually it is connected to the iPhone, but the inside diameter of the speaker appears on the bluetooth screen.  That is what it is?

  Check the instructions for the Bose speaker and reset After the reset of the speaker, put discovery/torque mode and activate Bluetooth for the iPhone. See if it appears.

• Satellite C670-199 / C670D - Bluetooth Question

  Hello guys

  My apologies in advance if it's a question real daft, but it models have built-in BT? The label on the specific keyboard for this but having real difficultiy find evidence of it on the laptop (IE how to light etc.) and comments online suggest otherwise?

  Help, please!

  See you soon

  Matthew

  > My apologies in advance if it's a question real daft, but it models have built-in BT?

  No, * Satellite C670-199 * is not equipped with a BT module.
  He has been fitted with a Realtek Wlan card that is NOT the combo card. This means that only Wlan is available.