Pinning notes

Similar Questions

• 6032TAN_CAP pin not connected

  Hello

  6032TAN_CAP-print matches exactly the SMD Capacitors that I bought.
  When I add an electrolytic capacitor for the schema, choose this 6032TAN_CAP also the footprint (Fig 1) and assign pins to the net (photo 2), the two axes are not connected to any net in Ultiboard (photo 3).

  Any ideas?

  Kind regards
  Johannes

  Hi Johannes,

  to check this, you can download the trial version of the suite of circuit design and use it for installation, and then use your serial number to activate it. The second way is to use my modified component.

  It will be useful.

• BlackBerry Smartphones trying to backup and restore - pin not recognized

  I hope someone can help me!

  I'm trying to back up my data on my 8320 and my pin code is not recognized.  I downloaded the software, while the phone was NOT connected.

  Is it possible that this issue MAY have something to do with the company's server?  I've owned my blackberry for years.  When I took a new job, I asked my personal blackberry to be hung on the server of the company.  When I left the company, I have asked that it be removed from my blackberry.  I have not tried to save the data for this time.  I'm changing phones and my pin code is not recognized.  Further study revealed that the IT security certificate is always on the phone.  Could this be why I can't save the data?

  Are there other options to move the data to the new phone without wiping data from my old phone?  I need to transfer my saved e-mail messages, entries in the calendar and contacts of 1111 to my new phone.

  Does anyone have a solution for me?

  Thank you very much

  Hello

  Service packs will not provide compatible Bluetooth. It is an option of hardware on the PC.

  You can, however, by a Bluetooth adapter with which you can create a Bluetooth connection.

  Here is a list of compatible Bluetooth adapters:

  http://support.Microsoft.com/kb/841803/en-us

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• How to keep elements of the visible headers on mobile sites?  Pin not an option

  In the order of the elements remain at the top or at the bottom of a desktop site you pin, but in the mobile layout I find that PIN is not available.  I want my header and Menu always on top.

  Hello

  You can use the scroll effect to achieve.

  Select your items you want "pinned" and open your scrolling check Motion Control Panel the check box for the movement and the value of all the values to zero.

  Here is the screenshot for help.

  

  Concerning

  Vivek

• IPod GEN 4 or 5; who has 8 pins of lightning

  I bought an iPod used on eBay, specific ad is a 4th generation, when it arrived, it has the connector 8 pin, not 30.  I want to buy a case and screen protector, but not sure of the model.  Anyone know what generation it might be?

  The 4th generation has the 30-pin connector. More recent models have the connector of the lightning.

• RESERVED on SMU-6537 pins?

  In the help file for the SMU-6537, there is an illustration of "Front Panel and connector pinout" and a table.

  The illustration shows pin GND 8.

  However, the table below shows pin 8 as a RESERVED pin, * not * a GND.

  I design a Board to interface with the 6537. I massage pin 8, or let it float?

  Hey Tom,

  PIN 8 in the illustration should tell RESERVED and not mass, and therefore you must not connect. We will update the image in the next revision of the help file. So to answer your direct question, leave floating 8 pin (do not connect to it). Let us know if you have any questions or concerns. Thank you and have a nice day.

  Kind regards

  DJ L.

• using qnx.system.Device.pin

  The class PIN not usable in the current SDK? a bit like the keyboardType class?

  I'm trying to use it, but it is throwing errors like if there is no...

  It is not a class, it is the field. Go there for example like this:

  import qnx.system.Device;
  
  //... lots of code
  trace(Device.device.pin);
  

  [Edit]

  I forgot to mention, but in the current Simulator, this field is always 0.

  [/ Edit]

• BlackBerry smartphones need help... bbm pin...

  Nice day

  I'm totally new to blackberrry... my friends asking my bb pin... where can I get this pin not. ?

  Hi and welcome to the forums!

  To locate the personal identification number (PIN)

  For BlackBerry smartphones running BlackBerry 6

  1. On the BlackBerry smartphone home screen, click Options.
  2. Click on the device.
  3. Click on the device and state information.

  Shortcut: Open a message, go to the first text line, type MYPIN press room

  Thank you

  Bifocals

  Other important identification numbers:

  KB05026 How to locate the PIN number, IMEI, ESN or MEID number on the BlackBerry smartphone

• I don't see the pin of an adjustment brush.

  I found this in Lightroom help:

  <

  Working with multiple local adjustments

  When applying and working with multiple local adjustments, keep in mind the following:

  • Click any pin to select it. A selected PIN has a black Center. Pins not selected are white Uni.
  • Press H once show the PIN selected; Press H to hide the pins; Press H once to show all pins.
  • When the adjustment Brush tool is selected, there are only the stems of adjustment to change. When the graduated filter tool is selected, only graduate filter pins are available to edit.
  • The adjustment Brush tool drawer allows you to specify options for two brushes, A and B. Select a brush by clicking on the letter, or switch between brushes by pressing the forward slash (/) key. Brush options "stick" regardless of the effect that you choose to apply until you change them.

  >

  My problem is that it does not work as advertised. I experimented on a photo and you can do my brushes A and B. But I see that edit for A PIN. The pin code of B shows ever upward. Hitting H repeatedly is that toggle the visibility of the pine has.

  Nevermind, I just found out what that mean make a new brush. It is not A and B, but there is another control called New just under the icons for picture adjustments. I'm not sure what the logic is behind having an and B as a brush. They become two brushes controlled by a PIN.

• Any way to recognize the power of Dell provides that are not standard?

  I have a fleeting memory that, several years earlier, supplies Dell used a different pinout than standard ATX power supplies and hang one up to another motherboard of brand or by using a different power supply with a Dell didn't matched no joy.  I am putting back nine of some old Dells I recorded and I was wondering if someone could give me guidance as to which machines different power supplies were, when they were a way to recognize the eccentrics, nothing.

  Thanks in advance for any help.

  Specifically 200W PSU 9228C DELL reference NUMBER

  No idea what the part Small Form Factor number so if it came from one of the models below its not useful and is not EPS12v so it has a connector 20 pins not 24.

  DPN 9228C supports the following Dell models:

  Dimension 4100, Dimension 4100, DT, Dimension 4100, MT and Dimension LXXXc MMT, Dimension V___ Dimension V___C Dimension VXXX MDT, Dimension VXXX MT, Dimension XPS BXXXR MDT, Dimension XPS BXXXR MT, Dimension XPS R, Dimension XPS TXXX MDT, Dimension XPS TXXX MT, MT Optiplex E1, OptiPlex G1, Optiplex G1 M, MT G1 (+) (+) Optiplex, Optiplex Gn M, Optiplex Gn MT, OptiPlex GX1, OptiPlex GX1 Tower , OptiPlex GX1 Low Profile, Optiplex GX1 desktop computer, desktop OptiPlex GX1 mid-size, OptiPlex GX1 Ultra small FF (Net PC), Ultra Small Form Factor of OptiPlex GX1, OptiPlex GX100 Optiplex GX100 MT, OptiPlex GX110, Optiplex GX110 M, Optiplex GX110 MT, OptiPlex GX110 (R2), OptiPlex GX110 (processor Socket), OptiPlex GX115 OptiPlex GX1P, Optiplex GX1p M, Optiplex GX1p MT, OptiPlex GX200 Optiplex GX200 M, Optiplex GXA EM M, Optiplex GXA EM MT, Optiplex GXA M, Optiplex GXA MT

  Dell returned to exclusive on the Optiplex X 020 series 3020 9020 aka, but they use tiny connectors so you can not mix with a standard scope of delivery.

• HP G2 2301: keyboard for matching problems HP G2 case

  HP G2 2301 10 "tablet with keyboard in case can not pair... Battery box is charged, when I press the 2 keys matching flashes pairing continuously for 2 minutes then shuts off the coast but the keyboard does not work with the tablet.

  Hello and welcome to the HP support community!

  This question has been asked and answered several times.  The search function is your friend!

  1. from apps, click on 'settings' (NOT Google settings)

  2. click on "Bluetooth."

  3. turn on the keyboard

  4. press together the 'fn' and 'bluetooth icon' key

  5 blue Light will begin flashing (be prepared to write PIN code #)

  6 screen will identify the detected devices, click on the name of HP Tablet option

  7. the screen say 'current twinning', then show you a 6 digit PIN (note)

  8. now, here's the trick, just type the PIN code # using the keyboard case (you will not see it anywhere on the screen)

  9. press the key "Enter" on the keyboard.

  WyreNut

• HP 9713c laptop: installation of an SSD in my HP 9713c.

  How to install an SSD that features a SATA port to the interface on the MB that is pinned (not SATA)? There is no way to plug into the SSD.

  I thought about it. I didn't know that the pinned interface appears off the coast of the SATA interface hard disk. He appears turned off, put it on the SSD and live. Side, note what difference in performance tremdous. He must have accelerated start-up time by up to 10 times and launching apps for iPhone by almost the same. It is a must for a slow laptop. I installed a Samsung Pro 850 128 G.

• Connections missing in ultiboard when transferred to multisim

  I made my design in Multisim, then transferred to Ultiboard.  Organized everything how I wanted and make small changes in the schema as needed.  All annotated before with no problems until today. All of my lights are not connected although the net are in the files of the Multisim and Ultiboard.  Highway runs, but still does not connect...

  Very frustrated, if someone could help, that would be appreciated.

  I thought about it!

  LEDs have a personalized footprint and I got map a symbol to a fingerprint brooch pin not in the database manager.  It must be something that shows an error if it does not occur if the user knows where the question is... in any case, it's very good of automatic routing now

• Is there a site that has a variety of useful accessories of rocket?

  I love my rocket and use it all the time, but I would like something like a wake-up call or any other accessory pregnant) that I could plug my rocket (which is made especially for the "rocket", not something that uses only a 3.5 mm headphone jack). These things exist, or are they just for the elite of the ipod?

  "Made for Sansa" docks (compatible with Sandisk many players with the same connector 40 pin, not only the "rocket") have been published before, but as far as I know, they have all been abandoned and are now hard to find. But if you search for "altec lansing im413" and "sansa clock radio timex" on commercial sites, maybe you'll get lucky.

• BlackBerry Z10 mypin

  When I enter "mypin" followed by a space in a text Message, I get the 2 words my pin, not my PIN code. When I enter "my number" followed by a space in a text Message, I get the 2 words 'my number', not my phone number. What I'm doing wrong... ??

  AutoText does not currently work for text messages. It is a known problem.

  You will need to try another place, maybe in the application do not forget... Then cut/copy and paste the text.

  They are working on this bug, it is in the KB.