PIX of Dhcp Server

I know that the PIX can act as a DHCP server, but can he have bookings MAC - IP?

I would like my PIX to issue dhcp for our internal network, but I need to have some reservations for clients.

Hello

This is launched from time to time, but I'm afriad that the answer is always that the PIX cannot make DHCP reservations. The server DHCP PIX feature is supposed to be * very * basic. The idea was really to provide functionality of DHCP server for SOHO environments, where another DHCP server did not exist. I doubt we'll ever add this feature to the PIX since other recommended more comprehensive DHCP servers are available. You can do this with IOS DHCP if there is an option. Sorry for the news, but I hope that this help save you some time research.

Scott

Tags: Cisco Security

Similar Questions

  • DHCP server for pix

    Server DHCP - pix - dhcp clients

    is it possible to have a dhcp server machine to say the inside interface, and dhcp clients are on the dmz?

    Thank you

    a feature named dhcprelay should solve your problem. I did the opposite, i.e. the server dhcp on the outside and the customer inside. However, I guess that the 'dhcprelay' command should do.

    for example

    dhcprelay Server 192.168.2.2 inside

    dhcprelay enable dmz

  • wrt160n with cisco pix and isa server 2004 config

    Hello

    I am installing a configuration to which my wrt160n router should work, but it is not at present

    .. the is the problem:

    Internet proxy - pix cisco - ms isa 2004 - 4 network cards <> lan1, lan2, dmz and wlan networks

    The wlan network card will only be my lan wireless for internet access interface. The isa server wireless lan nic has been configurered with an IP 10.0.10.1. / 24

    Configure the interface to internet wrt160n with static ip 10.0.10.2 / 24 and bridge 10.0.10.1 2 i'net addresses of dns.

    My dhcp server config is 192.168.100.x /255.255.255.0 and the same dns addresses i'net 2. NAT is disabled because isa server nat for all networks

    where is mistaken or do I forgot something... Help, please

    Activate NAT on the WRT or add a static route for 192.168.100.0/255.255.255.0 to 10.0.10.2 on your isa server computer.

    Of course, you only want wireless, there is not need to use the WRT as a router. You can set the WRT back to DHCP on internet settings. Set the address LAN IP of 10.0.10.2 with a mask of 255.255.255.0. Disable the DHCP server on the WRT. Then one of the LAN wire ports of the WRT to the ISA Server. Do not use the internet port on the WRT!

    Now, you have configured the WRT as simple access point. So you should use your ISA Server to serve DHCP IP addresses inside 10.0.10.0/24...

  • Remote access VPN with ASA 5510 by using the DHCP server

    Hello

    Can someone please share your knowledge to help me find out why I'm not able to receive an IP address on the remote access VPN connection so that I can get an IP local pool DHCP?

    I'm trying to set up remote access VPN with ASA 5510. It works with dhcp local pool but does not seem to work when I tried to use an existing DHCP server. It is tested in an internal network as follows:

    !

    ASA Version 8.2 (5)

    !

    interface Ethernet0/1

    nameif inside

    security-level 100

    IP 10.6.0.12 255.255.254.0

    !

    IP local pool testpool 10.6.240.150 - 10.6.240.159 a mask of 255.255.248.0. (worked with it)

    !

    Route inside 0.0.0.0 0.0.0.0 10.6.0.1 1

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet

    life crypto ipsec security association seconds 28800

    Crypto ipsec kilobytes of life - safety 4608000 association

    Crypto-map dynamic dyn1 1jeu transform-set FirstSet

    dynamic mymap 1 dyn1 ipsec-isakmp crypto map

    mymap map crypto inside interface

    crypto ISAKMP allow inside

    crypto ISAKMP policy 1

    preshared authentication

    3des encryption

    sha hash

    Group 2

    life 43200

    !

    VPN-addr-assign aaa

    VPN-addr-assign dhcp

    !

    internal group testgroup strategy

    testgroup group policy attributes

    DHCP-network-scope 10.6.192.1

    enable IPSec-udp

    IPSec-udp-port 10000

    !

    username testlay password * encrypted

    !

    tunnel-group testgroup type remote access

    tunnel-group testgroup General attributes

    strategy-group-by default testgroup

    DHCP-server 10.6.20.3

    testgroup group tunnel ipsec-attributes

    pre-shared key *.

    !

    I got following output when I test connect to the ASA with Cisco VPN client 5.0

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: (4) SA (1) + KE + NUNCIO (10) + ID (5), HDR + VENDO

    4024 bytesR copied in 3,41 0 seconds (1341 by(tes/sec) 13) of the SELLER (13) seller (13) + the SELLER (13), as well as the SELLER (13) ++ (0) NONE total length: 853

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ISA_KE

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, nonce payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received xauth V6 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, DPD received VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received Fragmentation VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: real aggressive Mode: false

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, received NAT-Traversal worm 02 VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, connection landed on tunnel_group testgroup

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA payload processing

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA proposal # 1, turn # 9 entry overall IKE acceptable matches # 1

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build the payloads of ISAKMP security

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building ke payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building nonce payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for answering machine...

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of payload ID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of Cisco Unity VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing payload V6 VID xauth

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, building dpd vid payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing the payload of the NAT-Traversal VID ver 02

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, NAT-discovery payload construction

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, construction of Fragmentation VID + load useful functionality

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, send Altiga/Cisco VPN3000/Cisco ASA GW VID

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 0) with payloads: HDR SA (1) KE (4) NUNCIO (10) + ID (5) + HASH (8) + SELLER (13) + the SELLER (13) + the SELLER (13) + the SELLER (13) NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) total length: 440

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 0) with payloads: HDR + HASH (8) + NOTIFY (11) + NAT - D (130) + NAT - D (130) of the SELLER (13) + the seller (13) + NONE (0) overall length: 168

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash for ISAKMP

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload NAT-discovery of treatment

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, calculation of hash discovered NAT

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, useful treatment IOS/PIX Vendor ID (version: 1.0.0 capabilities: 00000408)

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, payload processing VID

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, the customer has received Cisco Unity VID

    Jan 16 15:39:21 [IKEv1]: Group = testgroup, I

    [OK]

    KenS-mgmt-012 # P = 10.15.200.108, status of automatic NAT detection: remote end is NOT behind a NAT device this end is NOT behind a NAT device

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 72

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = d4ca48e4) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 87

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, transformation MODE_CFG response attributes.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = authorized

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized primary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: = authorized secondary WINS

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Compression IP = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling political = disabled

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: setting Proxy browser = no - modify

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: browser Local Proxy bypass = disable

    Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, (testlay) the authenticated user.

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 64

    Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 6b1b471) with payloads: HDR + HASH (8) + ATTR (14) + NONE (0) overall length: 60

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cfg ACK processing attributes

    Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = 49ae1bb8) with payloads: HDR + HASH (8) + ATTR (14) + (0) NONE total length: 182

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): enter!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, treatment cfg request attributes

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 address!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the IPV4 network mask!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for DNS server address.

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the address of the WINS server.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, transaction mode attribute unhandled received: 5

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the banner!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting save PW!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: receipt of request for default domain name!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for Split-Tunnel list!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for split DNS!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for PFS setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Proxy Client browser setting!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the list of backup peer ip - sec!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for setting disconnect from the Client Smartcard Removal!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the Version of the Application.

    Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Type of Client: Windows NT Client Application Version: 5.0.07.0440

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for FWTYPE!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: request received for the DHCP for DDNS hostname is: DEC20128!

    Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: application received for the UDP Port!

    Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIPT Message (msgid = b04e830f) with payloads: HDR + HASH (8) + NOTIFY (11) + (0) NONE total length: 84

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload

    Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload

    Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, in double Phase 2 detected packets.  No last packet retransmit.

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE has received the response from type [] at the request of the utility of IP address

    Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, cannot get an IP address for the remote peer

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE TM V6 WSF (struct & 0xd8030048) , : TM_DONE, EV_ERROR--> TM_BLD_REPLY, EV_IP_FAIL--> TM_BLD_REPLY NullEvent--> TM_BLD_REPLY, EV_GET_IP--> TM_BLD_REPLY, EV_NEED_IP--> TM_WAIT_REQ, EV_PROC_MSG--> TM_WAIT_REQ, EV_HASH_OK--> TM_WAIT_REQ, NullEvent

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, case of mistaken IKE AM Responder WSF (struct & 0xd82b6740) , : AM_DONE, EV_ERROR--> AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL--> AM_TM_INIT_MODECFG_V6H NullEvent--> AM_TM_INIT_MODECFG, EV_WAIT--> AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG--> AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK--> AM_TM_INIT_XAUTH_V6H NullEvent--> AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b ending: 0x0945c001, refcnt flags 0, tuncnt 0

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending clear/delete with the message of reason

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, empty building hash payload

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing the payload to delete IKE

    Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, build payloads of hash qm

    Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SEND Message (msgid = 9de30522) with payloads: HDR HASH (8) + DELETE (12) + (0) NONE total length: 80

    Kind regards

    Lay

    For the RADIUS, you need a definition of server-aaa:

    Protocol AAA - NPS RADIUS server RADIUS

    AAA-server RADIUS NPS (inside) host 10.10.18.12

    key *.

    authentication port 1812

    accounting-port 1813

    and tell your tunnel-group for this server:

    General-attributes of VPN Tunnel-group

    Group-NPS LOCAL RADIUS authentication server

    --
    Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
    http://www.Kiva.org/invitedBy/karsteni

  • Satellite Pro C650 can't find our DHCP server

    Hello

    We just recived 8 new Satellite Pro C650 and care about their image.
    When connect us to our network via a cable and boot on LAN of the laptop can not find our DHCP server and so of does not obtain an IP address.

    If we connect to an another laptop\workstation in the same Manor, it works very well.

    All the settings are correct in the BIOS.

    Any ideas.

    Hello

    First of all, you should check if the settings of TCP/IP to connect to the local network.
    Network-> properties-> LAN (local area) connections-> TCP/IP-> properties

    Here, you should check if the options for the IP address, DNS are set to obtain automatically.
    In the advanced settings of TCP/IP in IP settings tab active DHCP must be visible.

    In addition, please check if all firewalls do not prevent the laptop to connect to the local network.

  • Keep the IP if the DHCP server is offline now

    We have a customer who wants to be able to manage the IP addresses of all devices with DHCP, but the devices are supposed to keep their IP forever after the DHCP server has been taken offline. Is this a behavior that we can support on a controller of NOR?

    If this is not a configurable behavior an alternative could be to have controlelr auto configure to the last known IP if no such is acquired... but the VI apply network settings doesn't seem to work if done on the controller itself. Is this correct?

    With NEITHER in Norway (thanks), I found a solution which allows us to implement the required behavior.

    The main problem for us once we need to override the default behavior for DHCP was the fact that the RT apply target Network Settings.vi does not work if it is set to target the same controller as it is running. So how to exchange between DHCP and fixed? Well, it turns out that the network settings are also stored in the file of ni - rt.ini. So here's what we do: when the controller starts, we check if it is running in DHCP mode. If this isn't the case, we change this in the file nor - rt.ini and the reset - to see if the DHCP server is operational. If the controller is running in DHCP, we check if the IP address is valid (i.e. outside the local range of link). If it isn't read us the last known IP address and write those set in the file nor - rt.ini and restart.

    An example of the sections of the INI file:

    For DHCP, the section of the nor - rt.ini will look like this:

    [TCP_Stack_Config]

    USE_DHCP = DNS_Address

    Gateway USE_DHCP =

    USE_DHCP = Ip_address

    USE_DHCP = Masque_sous

    For a static IP address:

    [TCP_Stack_Config]

    DNS_Address = 0.0.0.0

    Gateway = 10.0.18.1

    Ip_address = 10.0.18.13

    Masque_sous = 255.255.255.128

    It would be nicer than the network RT target apply Settings.vi would work for auto-reconfiguration, but it saved the day for us at least in this case.

  • DHCP Server R2 2012 problem

    Hello world.

    I am new to Windows Server. I'm setting up a server to connect thin clients and use it only as an internet point.

    Server roles installed: SC AD, AD DS, AD FS and AD LDS, AD RMS, App Server, DHCP, DNS, file storage Services, Hyper-V, IIS, IPAM, NAP, remote access, Remote Desktop Services. GOING to Services, WDS, Windows Server Essentials experience, WSUS Server Local, all servers.

    My problem is that DHCP does not dynamically IP addresses in the clients. In trying to check the DHCP problem, I used followed enough of ipconfig ipconfig / renew and got the error message "an error has occurred during the renewal of the vEthernet of the virtual interface (my static IP port): unable to contact your DHCP server. I even removed then added the DHCP function and no change.

    What I am doing wrong? Help, please!

    Other tips on this deployment will be welcome, because I'm out of my League here and have no money to wait for him.

    PS. I downloaded and installed SELFSSL for safety certification, as is (without modification).

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • DHCP server running Hyper-v comments

    Original title: Hyper-V DHCP

    Hi all

    I'm having a problem with a DHCP server hyper-v guest.

    The DHCP server is seeing demand fall, assignment of an address to the pool, but the client pc never receives the details.

    Hyper-v host is 2012r2, the guest is 2012r2 running on a gen 2 VM.

    On the same hyper-v host is our SBS 2011 VMS (which does not not on the legacy network adapter) run DHCP with no problems.

    I'm obviously SBS DHCP services during the test.

    The 2012r2 and the SBS invited to be on the same vSwitch with the only difference that I see the generation of VM.

    Any ideas?

    Thanks in advance,

    Rob

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • The dhcp server has not seen a directory for authorization server

    I recently upgraded from Server 2003 to windows server 2008 r2. After the upgrade, the DHCP server has started to not giving IP address after a lease has expired. For DHCP to provide IP addresses, I have to restart the server. I need help on how to configure my server to allow the service to restart. Any help will be much appreciated

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • New DHCP server not to issue the IPS (2012 R2)

    Having a new DHCP server is going. Authorized and not coming error. Turn off the old DHCP server and try to renew the lease of the IP, and nothing happens. What is the problem?

    I forgot to change the IP addresses of switches support. :( Everything works. :)

  • Cannot DHCP server see

    World in the morning.

    I have a problem that I do not quite understand and I hope that it is an answer out there fairly quickly until I shoot all my hair!

    I'm working on a VIRTUAL network IL4 Secure LAN. I have DHCP enabled and configured on a server that also acts as the domain controller.

    I set up the scopes on the DHCP server with the IP address range that he should look on what subnet etc.

    If I use a static IP address, it connects instantly, but when you use DHCP is takes a while to find something while he gives automatic address 169.254 (PIPA)

    Why the client computer cannot see the DHCP server?

    • Client PC is located on the same domain.
    • DHCP enabled on Server services
    • DHCP enabled on IPv4

    Server is 2008r2 and Client pc Windows XP and Windows 7

    Thoughts?

    Hello

    Problems with the servers are covered in TechNet, you can post the question here:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    Thank you

    Waseemulla S

  • Requirement of DNS and DHCP Server Essentials 2012 home

    I have a Server Windows Essentials 2012 acting as DNS and DHCP server with a domain name for backups etc on my home network. It's that everything works fine, no errors, no problem. Works well actually, telling me when the children did not install updates or restarted.

    I have two groups of users. My sons step, 10 and 12, which I want to use OpenDNS as a provider external DNS with a policy very, very limited and my wife and me who want to use indications of root or Google DNS or any other DNS provider. Others, specific devices no user (box of the xBox, WII, Satellite, TV, CCTV etc.) can use.

    Before the 2012 server, I had a 2 k 3 server running in a virtual machine for DHCP, alone and put my wife and my devices on static reservations with the just and external DNS provider used OpenDNS as the default scope, DNS. Unfortunately different bits of domain services 2012 don't seem to work unless the server of 2012 is the first DNS server listed on client machines (backups failed. Impossible to find other local computers). Currently, this means that we are all using OpenDNS.

    What I would like is a way to say 2012 to send adult group DNS queries to another DNS provider and leave the rest at default to OpenDNS, while still having them register in the original DNS domain. Any suggestions?

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Can DHCP server with two scopes - I have reservations in doubles in the two staves?

    Hi all

    Not really a guru of DHCP, so be nice :)

    Currently, we run a DHCP service from one of our domain controllers (win 2008R2). The domain controller is the segment of a network (10.10.120.0/24), the computers making DHCP requests are on a separate network (10.10.103.0/22). We use our ip-helper routers setting to say the devices on the network, how to reach the DHCP server. This has worked well for years.  I should also point out it is company policy for PCs/servers have a static IP, so for the PC, we create reservations for each PC. Servers are assigned static mmanually.

    The question is now we have overflowed into a new building and put in a black 1 GB fiber that connects the two buildings. The network in the new building is using a different network (10.10.104.0/24) address. Implementation of a 2nd scope on the DHCP server for this address range went well and once the ip-to support additional parameter has been done on the router the PCs in the new building could fine DHCP to the domain controller in the main building. Everything is good.

    The question is now, we are moving PC between the two buildings, I was wondering if it is ok to keep the existing reserves for the PC in one scope and have a duplicate for her in the new scope assign the new IP address. Of course, the PC cannot be in two places at once and the DHCP console doesn't; "t seem to complain about the same MAC address used in two staves, but I don't really know whether it is advisable or not. Basically, our operations staff become a little miffed at having to remove a single scope of reservations and recreate them in the 2nd scope when the PC to move between buildings.

    So the questions is safe / advisable to do it or not?

    Kind regards

    Craig

    Support is located in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • I get RAS ip in my DHCP server and the place of the incoming connection in my network

    I don't know I have not configured any VPN server in my system and all of the servers, I checked the option for remote access, it is not configured in one of my servers, but after each reboot, I get a (inbound connection) in my network places and 1 IP address in the DHCP server leases, I mean that 1 IP show my correct address of the computer in DHCP and another IP for RAS ,

    Help, please

    Adil-

    Hi adil

    Your question is addressed in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forums.

    TechNet - Windows Server category:
    http://social.technet.Microsoft.com/forums/en/category/WindowsServer

    Concerning

  • Windows 2003 dhcp server

    Dear Sir.

    I use the dhcp server in windows server 2003.
    I use 1 network card with the 172.16.144.0/23 network.
    now, I want to create a different scope as 172.16.146.0/23 and communicate between this scope 2 then what I have to do?

    Sunil patel

    Post in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

Maybe you are looking for