PL/SQL error - the highest level of program management

Similar Questions

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• Even though I have my Windows Mail spam set to the highest level, I continue to receive unwanted emails. For some reason any Windows Mail does not block them. How can I fix it?

  I have my blocker spam Windows Mail, the highest value which means I should only receive emails from my contacts.  Despite this, I continue to receive unwanted emails.  This has been so since I've upgraded to Windows 7.  I even went now install a machine program washing 'spam' which was a disaster as well.  I get about 4-5 spam emails a day - usually when I start the morning.

  How can I solve this problem?

  What Windows Mail in Vista or Windows Live Mail in Win7? If it is a POP3 account, you can filter your messages by using message rules. This is for Outlook Express, but it works the same either of the programs.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• Spoolsv.exe-associated runtime error, the buffer overrun detected, program must now end.

  Received the following runtime error.  Buffer overrun detected, program must now end. Seems to relate to C:\Windows\System32\spoolsv.exe. Can it be ignored or must it be corrected. ?

  I am running Windows 7 SP1 installed on PC and do not have enough computer knowledge to determine what actions spoolsv.exe performs.

  Hello

  Did you recently installed Office on your computer?

  Please upload a screenshot of this run-time error that we can study properly and provide you with a solution.

  How to include a screenshot in your message.

  Run the System File Checker and see if it fix broken files.

  http://support.Microsoft.com/kb/929833/

  Is it common or is he only appeared once on your computer?

  Thank you.

• Satellite L300 - after restarting the screen brightness is the highest level once again

  Hello!

  I have a Toshiba Satellite L300-215.

  Just installed Windows XP I went to keen on Vista. In any case I ve downloaded all the XP drivers on the Toshiba site. Everything works perfectly except the brightness level.

  When I start my laptop to the top of the screen is at its maximum brightness that I then use the function hotkey special "FN and f6" to turn down the brightness of the screen. However once I have disable my laptop then restart it, the brightness goes back to the maximum level again...
  Any ideas how I could prevent the brightness that goes back to max?

  I read that it s a particular order I should install the utilities and drivers from the Toshiba website for windows XP?
  The ideas and help in what order?

  See you soon

  Hello

  In your case, I'd install the Toshiba Power Saver. This Toshiba tool is really great because set you the brightness of the screen for different profiles (full power, normal, etc.) and there you can adjust the brightness of the screen. In addition, you can change the method of cooling, the performance of the processor and to this day.
  Check it!

  You can download the energy on the Toshiba page saver. I also have a Satellite L300 with Windows XP and everything works perfectly.

  Here's the order of installation for Toshiba tools, they control the FN keys, etc. :
  Toshiba Common modules
  TOSHIBA Hotkey Utiliy
  Utility Toshiba Touchpad on / off
  Toshiba Utilities
  TOSHIBA Power Saver
  Toshiba Assist
  Toshiba controls

  Good bye

• BlackBerry leap speaker crackling and caller voice level is so low even set at the highest level.

  New 1 day old phone and the speaker is crackling during the speakerphone mode or when you adjust the volume level of notification. In addition the audio level of voice calls is barely audible. It's exactly like my old Z10. Come on blackberry? !!! You guys are really all QA before packinging your products or is - this new Bond is a repackaging of exccess and components of the Z10? It's my 3rd 10 blackberry device. I'm running out of excuses to continue to support the guy.

  I returned my jump today and bought another classic. In addition to the problems I mentioned, I also found this mixture will connect to jump at all.  With this new specific classic speaker working, no sound of cracklng. Everthing works. 10.3.1.1865 firmware version

• SQL query for roll up the amounts from more down to the highest level

  with data (select child 'C', 'P' as a parent, 11 amount of double

  the Union all select 'C1', 'C',-2 double

  Union all select 'C2', 'C', 3 double

  the Union all select 'C3', 'C',-8 double

  Union all select 'C4', 'C', 10 double

  Union all select 'C11', 'C1', 7 double

  the Union of all select them 'C12', 'C1', double 12

  Union all select "C21", "C2", 5 double

  Union all select "C22", "C2", 9 double

  Union all select 'C31', 'C3', 6 double

  the Union all select 'C32', 'C3',-4 double

  the Union all select 'C41', 'C4',-3 double

  the Union of all select them "C42', 'C4' 13 doubles

  the Union of all select them "C111", "C11", 16 doubles

  Union all select 'C121","C12", 8 double

  ) Select * from given by 2

  Hi Experts,

  I have the following table with the child-parent relationship which I would like to roll up from a lower to a higher level. The problem here is that I'm moving the level I should replace the amount for a parent with the overall value of his children and grand total aggregate amount should be c

  For example; In the example given the c111 data roll up to c11 as 16 (Please note: the amount for c11 is 7 should not be added to 16 rather replaced by 16) that more should roll up to c1.

  That means c1 = c11c12; c11 = c111 = 16 Yes, c1 = 16instread 12 16712.

  Since it is an intermediate table, I don't have any control over how many levels it can contain.

  So dynamically, I need a rollup query and group the amount of a lower to a higher level from the bottom.

  Is this possible? I look forward to any help. Thanks in advance.

  SQL > data
  () 2
  3. Select 'C' child, 'P' as a parent, 11 amount of double
  4 union all select 'C1', 'C',-2 double
  5 Union all select them 'C2', 'C', 3 double
  6 Union all select them 'C3', 'C',-8 double
  7 union all select 'C4', 'C', 10 double
  8 union all select 'C11', 'C1', the double 7
  9 Union all select 'C12', 'C1', 12 dual from
  all the 10 union select "C21", "C2", 5 double
  all the 11 union select "C22", "C2", 9 double
  12 union all select 'C31', 'C3', 6 double
  all the 13 union select 'C32', 'C3',-4 double
  14 union all select 'C41', 'C4',-3 double
  all the 15 union select 'C42', 'C4', 13 from dual
  all the 16 union select 'C111","C11", 16 of the double
  all the 17 union select 'C121","C12", 8 double
  18)
  19, data1
  20 in accordance with
  (21)
  22 Select parent
  23, child
  24, lpad ('-', (level 1) * 3, '-'). parent tree_structure
  25, amount
  26, case when connect_by_isleaf = 1 then amount 0 otherwise end amount_leaf
  27 data
  starting 28 with parent = 'P '.
  29 to connect
  30 per parent prior child =
  31)
  32 Select parent as a node
  33, tree_structure
  34, amount_sum
  35 of Data1
  model 36
  size 37 by
  (38)
  39 children
  40, parent
  41)
  42 measures
  (43)
  44 amount_leaf as the amount
  45, tree_structure
  46, 0 amount_sum
  47)
  automatic control of 48 rules
  (49)
  50 amount_sum [none, none] = amount [cv (), cv ()] + nvl (sum (amount_sum) [all cv (child)], 0)
  (51);

  ŒIL TREE_STRUCTURE AMOUNT_SUM BLINK
  --- ------------------------- ----------

  
  P   P                                 50
  C   ---C                              24
  C1  ------C1                          16
  C11 ---------C11                      16
  C1  ------C1                           8
  C12 ---------C12                       8
  C   ---C                              14
  C2  ------C2                           5
  C2  ------C2                           9
  C   ---C                               2
  C3  ------C3                           6
  C3  ------C3                          -4
  C   ---C                              10
  C4  ------C4                          -3
  C4  ------C4                          13

  15 selected lines.

• Process of PL/SQL error, the display of msg in the same page?

  Hello
  
  I have a process of PL/SQL. When the process completes successfully and the branch. After the treatment. Action points to the same page and with "include the success of process message" enabled, the success message is displayed on the same page. When I error in the page, a new page appears with the error and a link for the user to return to the Application (ie the previous page). Is it possible in this case error, or when I use RAISE_APPLICATION_ERROR error message displayed on the same page as a page of success?
  
  TIA
  
  Published by: Ms on 10 Δεκ 2009 07:51 πμ

  TIA,

  See the analysis of Re: update of a collection should error wire. It will provide the info you are looking for :-), I hope it

  See you soon,.
  Hari

• Start - and connect SQL to the lowest level in the tree or the hierarchy

  Hello
  
  In a tree structure as shown below how can I get all the child (tree) level lowest records as a - E, H, G, and D.
  A a B, C, D to level 2
  B E and F at level 3, and C G at level 3
  F a H level 4
  
  A
  | l | l | l
  B C D
  | l | l | l
  E F G
  | l
  H
  
  I have used start with and coonect by to give all levels of the tree as follows: -.
  SELECT task_id, parent_task_id, top_task_id, level
  OF pa_tasks
  WHERE project =: p
  START WITH parent_task_id IS NULL
  CONNECT BY PRIOR task_id = parent_task_id
  
  Thank you
  
  Published by: user10648285 on October 17, 2011 23:42
  
  Published by: user10648285 on October 17, 2011 23:42
  
  Published by: user10648285 on October 17, 2011 23:42
  
  Published by: user10648285 on October 17, 2011 23:43

  Oracle a [url http://download.oracle.com/docs/cd/E11882_01/server.112/e26088/pseudocolumns001.htm#i1009313] nickname for hierarchical queries:

  SELECT task_id,parent_task_id, top_task_id,level
  FROM pa_tasks
  WHERE project_id = :bind_variable
  and connect_by_isleaf = 1
  START WITH parent_task_id IS NULL
  CONNECT BY PRIOR task_id = parent_task_id
  

• Easy VPN setup with interface to multiples with the same level of security

  Hello

  I want to configure an ASA 5505 with 7.2 (4) software and dual license ISP and when I configure two interfaces with the level 0 on two security interfaces and enable vpnclient the trace message appear:

  ERROR: Cannot determine the internal and external interfaces Easy VPN remote: multiple interfaces with the same levels of security.

  vpnlclient of configuration above:

  vpnclient Server x.x.x.x where x.x.x.x
  vpnclient mode network-extension-mode
  vpnclient nem-st-autoconnect
  vpnclient TUNNEL_EZVPN_TUNNELSPEC vpngroup password *.
  vpnclient username usr_ezvpn_tunnelspec password *.
  vpnclient enable

  interfaces:

  interface Vlan200
  nameif outside1
  security-level 0
  IP x.x.x.x 255.255.255.252
  !
  interface Vlan300
  nameif outside2
  security-level 1
  IP x.x.x.x 255.255.255.128
  !

  monitor the SLA to the routing:

  monitor SLA 100
  type echo protocol ipIcmpEcho 200.221.2.45 interface outside1
  NUM-package of 5
  frequency 30
  monitor als 100 calendar life never start-time now
  ALS 200 monitor
  type echo protocol ipIcmpEcho 200.154.56.80 interface outside2
  NUM-package of 5
  frequency 30
  Annex monitor SLA 200 life never start-time now
  ALS 300 monitor
  type echo protocol ipIcmpEcho 4.2.2.1 interface outside1
  NUM-package of 5
  frequency 30
  Annex monitor SLA 300 life never start-time now
  ALS 400 monitor
  type echo protocol ipIcmpEcho 200.244.168.149 interface outside1
  NUM-package of 5
  Timeout 3000
  threshold of 3000
  frequency 30
  Annex monitor SLA 400 life never start-time now

  Follow-up:

  !
  track 1 rtr 400 accessibility
  !
  Track 2 rtr 200 accessibility
  !

  routes:

  Route 0.0.0.0 outside1 0.0.0.0 x.x.x.x 100 track 1
  Route 0.0.0.0 outside2 0.0.0.0 x.x.x.x 200 track 2

  The track works normal.

  Kind regards!

  Try using the command "backup interface" on the secondary ISP interface.

  http://www.Cisco.com/en/us/docs/security/ASA/asa72/command/reference/b_72.html#wp1338585

  You need to increase the level of security to 1 for this interface.

  By default, EasyVPN uses the highest level of safety inside and the lowest outside.  Anything between the two must be set manually.  I assume you have an interior vlan defined but not added to the posted config.

• Satellite U400 - light always at the lowest level

  I have a U400 - 15G (PSU44E). I bought with Vista but I installed XP.

  My problem is that everytime I restart the computer, the brightness is set at the highest level and I have to reset it each time because I prefer the lowest level. Can't I fix this somewhere?

  Hello!

  > Can't I fix this somewhere
  Yes, you should only install the Toshiba Power Saver for Windows XP.
  Here, you can set the level of brightness at full power (AC adapter) and battery modus. It s a very useful tool and I like it.

  Consult the Toshiba site to download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Power Manager and display the brightness level

  Hello

  Laptop: ThinkPad Edge 13

  In my settings (Power Manager v1.89) together is average brightness level of the display (for the AC and the battery settings), but for some reason any after the screensaver or change username or Stanby mode brightness becomes at the highest level not to my settings.

  Why?

  Best regards

  Alex

  Problem is solved

  Just installed Hotkey features integration

• Have lost the ability to change the level of difficulty on the games of Freecell. It was there originally, but is now set to the hardest level? can anyone help please?

  Until recently, I was able to choose several levels of difficulty for Freecell card game using the 'Options '. Now there is no choice available under 'Option' or any other position. The game is stuck at the highest level with all combinations of 4. How can I get games with least difficulty IE 1 or 2 costumes? Please can someone help?

  Hello

  1. Since when are you facing this problem?

  2. are you aware of the changes made to the computer before the show?

  Method 1: Try to turn off the game by going to enable or disable the functionality of Windows and later the tower and check if that helps. Follow the link given below for the same thing.

  Enable or disable Windows features:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  Method 2: Run the (SFC.exe) System File Checker tool to determine which file is causing the issue, and then replace the file. To do this, follow the form of measures the following link:

  http://support.Microsoft.com/kb/929833

  I hope this helps.