Satellite L300 - after restarting the screen brightness is the highest level once again

Similar Questions

• Satellite L300 - after the BIOS update I have a black screen

  Welcome! I have a big problem.

  I improve my Satellite L300 BIOS to the old version that I download on the official website of Toshiba. I turn on the update program and after about minute, the system will shoot down and on the screen I see black screen only. The light on the drive flashes green and the led in the DVD-ROM flashes orange. I have no idea what's going on.

  Please help me!

  Hello

  It sounds like this during the update of the BIOS, that something was going wrong. I think that the ROM module must be reflashed or in the worst cases, the motherboard should be replaced.

  In any case, you should contact an ASP for help. Technicians can try to reflash the ROM module and solve this problem.
  If you don't know where is the nearest ASP, you can search on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• I was somehow infected and after restarting the laptop, it goes to a white screen.

  Original title: Virus

  I have an old HP Pavilion 2008. I was somehow infected and after restarting the laptop, it goes to a white screen. Not even the HP logo lights up. I can't access installation even though I know which key press.

  I created a bootable windows DVD 7 and a USB port. I can not even boot from one of them. With the DVD, it sounds like it wants to read, but there is something else wrong.

  Any help would be greatly appreciated.

  If the HP logo comes and you can't access BIOS, the problem is more likely to be at a lower level. A failed HARD drive should not prevent you from access to the configuration.

  Several things can cause the logo appears at the top (I write from a HP Pavillion 2008). I've dealt with many laptops such as yours and have seen many causes. Faulty RAM memory is a. A problem with the video chip is another. In fact several kinds of tokens (two bridges, video..). A virus is more unlikely but not impossible (if he messed with your BIOS, it is possible).

  If you don't see movement in your DVD or HARD drive, something I'm leaning more towards the video chip. Especially if it's Nvidia or Radeon - it would be a miracle if you use an HP laptop of 9 years with a powerful video (so that there is time) without having had any problems with it until now (mine is Intel). They overheat easily.

  What I would do in your case:

  1. remove the battery and unplug the unit. Give it 10 minutes and see what happens. Small chance, it would be useful, but it's easier to test.

  2. If you are reluctant to remove anything yourself proceed to 4. Otherwise, open the case and look for a reset (might want to read in the manual how to do it), remove the internal battery.

  3 try to remove the first (try to run) then the other of your plates to RAM (assuming you have two). During the race, all the tests remove the drive HARD and DVD just to eliminate the possibility of interference. If you manage to get started and get the logo and enter BIOS start adding parts back one by one and you will find the faulty one.

  4. If it at a gas station. Now you can do anything, if you can not enter BIOS so it must be a hardware change.

• Color calibration settings reset after restarting the computer

  Hello!
  I had a really hard time with my monitor calibration.
  I will try to describe my problem as simple as possible. I hope that someone will find a solution to this because I just couldn't.

  SYSTEM:
  ASUS N750JV, Intel Core i7, NVIDIA GeForce GT 750 M + Intel HD Graphics 4600 and, of course, Windows 8.

  PROBLEM:
  "Calibrate display" settings change/reset back from each time after restarting the laptop, shut down or put to sleep.

  DESCRIPTION OF THE PROBLEM
  I just can't calibrate my screen. Everything I do just does not work.
  Calibrating monitor in Windows 8 works very well only during the time when I actually do
  But if I restart, stop, or put my laptop to sleep just goes back to normal.

  For example, as a first step, the screen of Loggin on Windows 8 when I start seems calibrated.
  but when I connect I wait 2 seconds or two and all my settings are changed in return.
  I have to recalibrate the screen again and again once and again and again...

  Swear to God that I tried all possible solutions to solve my problem and none of them worked.
  I have read a lot of forums, and I can't find the solution that actually works.
  I did the solution 'Safe mode' , the 'clean boot' solution, in 'color management', I changed the settings (in a way that people who said it should work).
  I've updated all my drivers (my system than the GeForce GT 750 M is up to date). I installed all available updates for Windows 8 (when I check updates, the system tells me there aren't everything and my system is also up-to-date).

  I guess there could be a problem with my graphics card. I know that everyone has had problems these last time with the new update for GeForce, but like I said before, if I have confidence in my laptop then my graphics card is up-to-date.

  It really bothers me. It's annoying and I'm frustrated by that. The worst is that I can't find a solution to this, so I'm really asking for help.
  Thank you!

  Original title: calibration unsolved display problem - Windows 8

  Adeline B, thank you very much for your answer.
  I'm sorry that I have not responded in such a long delay.

  Well, my problem has been resolved. I downloaded my GeForce graphics driver was last updated.
  Now everything works fine.

  • I know that this problem can be irritating. If anyone has the same issue so I recommend you (like everyone else) download of the updated driver for your graphics card.
  • If this does not work, try to calibrate your system using programs/software installed on your computer by your manufacturer. In my case it was splendid ASUS utility. I also used Intel® HD Graphics Control Panel.
  • Another thing is you may think that your system does not calibrate when it actually... made. So what you can do, it's just waiting for the start until your system is finally charge up. In my case, Windows 8 something takes about 10 to 12 seconds, until what it changes all the settings of ' my settings'.»» Then first Windows 8 loads up to original settings (and this is why you find that your screen is not calibrated) but then it loads the calibration settings you make before you restart and all is well.

  I know this sounds so easy is probably not solve anything, but when I had this problem with the calibration I was so irritated by it I wasn't noticing the changes! I'd just instantly to the desktop or control panel configuration, or web and try to solve the problem, without waiting for my system completely load all settings. But... If the wait does not then consult my previous statements.

• Problems after restarting the vAPP vCOPS

  Hey there - I am under vCOPS 5.

  I noticed that some VM indicated "no data" in their respective details panels... I read somewhere the restart of the service was the way to solve this problem...

  At the time I was not aware of the mode of command line to restart the service (from the resumption of vcops-admin Ui box), so I right click the VAPP vCOPS itself clicked shutdown, expected some time after that he had done and he turned his back.

  Tried to login using the domain name COMPLETE on the web of the said server browser is not available - redirect where possible... shortly there after it struck me to a 404 screen.

  I checked in the vSphere Client IP are different and static, I then connected the box to user interface and run a summary, he showed the VM analytics from the same Ip address... so I ran the repair tool (repair vcops-admin - XXXXXXXXXXXXX ipaddress) with the address of the VM analytics... They say "fixed" after restarting the service once again, but after another analytical perspective - showed the same thing.

  I read that in v1 vCOPS, it was a graphic incompatibility known - and ignore it.  So-what could be the problem?  Let me know (I've already checked there is disk space)

  Thanks in advance for any help!

  Leffingwell,

  Can you check how much space is left on the partition/data of each virtual machine?  the 404 error means a webservice started, but one of the DB background servers probably didn't.

  If either/data is near or at 100% full, then you need to turn off the TIME... Add a new drive... power back on.

  When you add a drive, take all the default settings... and preferably choose style Eager zero thick (runs faster than the other two).

  Best regards

  Jon Hemming

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Can auto start an application after restarting the system?

  Hello world

  I can't find a way to the automatic launching application after restarting the system about BB10. But he supports on OS5, 6 and 7.

  Anyone has any ideas on this subject on BB10?

  Noah

  To come support "app without a head" (https://developer.blackberry.com/native/download/roadmap/) , at some point, will provide a feature like that apparently.

  When we see, and if it will be in the first version of this capacity, must be announced by BlackBerry.

• The SX20 language setting cannot be saved after restarting the device.

  Hello world

  Anyone encountered below the question before?

  I have a SX 20 with the TC7.1.4 software, when I change the default language to another, it will work, but after restarting, the automatic restore of the default language. I have tried the factory reset, but this isn't a job.

  Can someone help me? Thanks in advance!

  Billy

  How did did you deploy the device (CUCM, VCS, TMS,...)?

  Have you tried to reboot the device without the network that is attached to it?

  I wonder if CUCM or TMS reset your language, have you checked the parameters / models here?

  What languages do you speak? Have you tried to update to TC7.3?

• Deleted some files in the windows directory a few reasons, after restarting the system. showing a victim of COUNTERFEIT windows. How to reactivate my windows?

  Hi all

  I bought Lenovo laptop 10 months before staple. Today in my system, a malicious program "Progressive Protection system" is automatically installed. As a result, I searched the Internet and deleted some files in windows directory in C drive. Now after restarting the system, it's popping up a message stating "you are a victim of counterfeit windows. Even I have validated my window in internet with options available always is saying that my window is not genuine. Don't know how to turn it back on. If someone can help with this problem?

  I suspect that the problem is that the malware is still present - a repair installation will not get rid of it.

  @Prad_121

  Please follow the directions for the RDO and run the analysis offline so you can - at least, so we can be reasonably sure that the machine is free of malware.

  Once completed, please post a new report MGADiag.

• I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hi, I'm a newbie to Vcenter.  I just found out that I am not able to connect to the vcenter installed on the local host after restarting the Windows 2008r2

  Hello Cy1989,

  Check the items below in your vCenter server.

  1. check that VMware VirtualCenter Server service is started otherwise starts pls start...

  2 Vefiry VMware VirtualCenter Management Web Services is started otherwise start pls start...

  3. check that the configuration of the ODBC Data Source (DSN) used to connect to the database for vCenter Server is correct.

  4 Vefiry database are running and all required database services are running...

• My new Publisher El 12 runs only once after restarting the PC - how to fix?

  My new publisher of 12 items, runs only once after restarting the PC and seems to work well. I did a "clean install" repeatedly (cleared Temp files, shut down all applications, including Norton Antivirus and then installed DVD after a clean reboot). I can launch organizer of 12 elements several times, but the photo that editor runs only once. After that, I have to restart the PC, and then I can run the Editor again, but once again, only once. I also first 12 items for video files - no problem, he launched several times. I see that Alfredo has a similar problem: How can I fix?... is it a bug of El 12?... Thanks for your help... k-paul

  Thank you very much Peru Bob... your statement works... of course, this stitching is 12 items of closing/out not really closes it (which is why I could not re - start it), so there's always a problem... I can live with that, but why would the program stops not when I close?... k-paul

• CS5 install Fail: installation met an error(-1) during installation. If please restart the computer and try again.

  Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).

  Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.

  Have not been able to find a solution for the moment. Any help would be greatly appreciated,

  Thank you!

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  I want to run a vi that has a switch that passes between when run in vi It gives meeesage the highest level VI stopped for the unknown

  What should do?

  bisso92,

  You must be more specific...  When you say that you want the cover to be visible when it is called, I suspect you mean sub - vi.  You can go to the menu:

  File > properties VI then select the appearance of the window, followed to customize and select "display panel when called.  You can also select close thereafter, while initially closed.

  There are other "tricks", such as the incorporation of secondary school within your main VI, in this way, you can see both.

  Normally, a hand VI (or main function in other languages), would still present so that the operator can perform other operations.  If so you should look at using a Structure of the event with a producer / arrangement of consumer, where the consumer in a loop has the case structure where the sub-vis.

  To learn more about LabVIEW, I suggest that you try to watch some of these tutorials.

• How to upgrade the version track once again

  How to upgrade the version track once again

  There is one.

  You can download a new version as a new Adobe ID, I think; but on another computer.

• PL/SQL error - the highest level of program management

  Hi all
  
  http://download.Oracle.com/docs/CD/B10501_01/AppDev.920/a96624/07_errs.htm
  

  You can avoid unhandled exceptions by coding an OTHERS handler at the topmost level of every PL/SQL program.

  What is the highest level of the PL/SQL program?

  Why reading old documents?
  Are you still using version 9 of the database?
  Why not read from:
  http://www.Oracle.com/pls/db112/homepage

  The APPELLANT (or INVOKER) should deal with unexpected errors as explained here: http://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:4684561825338