Place hole problem

Similar Questions

• EA6200 password set in place the problem

  Hello!

  I tried to put in place my EA6200 or the first time. I did everything as it is written in the guide. I went to http://linksyssmartwifi.com/, accepted the terms and choose the manual set up. After that came an error page and I have to close the window. Since then whenever I open the page, it is requested a router password (that I had not put in place). 'admin' it doesn't work. I tried the reset but it did not help. I always get the following massage:

  

  Help, please!

  LACI

  Unplug your unit from ISP to the internet port of the router.

  Reset the default router. He now mentions the reset for only 10 but button to her for 30.

  Then follow the setup procedures or else that it is plugged into the internet port of the router.

• HP 6500 has when I click on print save as page is in place, no problem with scanning

  After restarting the computer and the printer after a break of three days, whenever I click on print, I receive a save as message.

  I ran the HP convenience store and make the message that no anomaly.

  What operating system? It seems that the printer port is set to LEAD: rather than a physical port.  In Windows 7, for example, you would click on start, devices and printers, click with the right button on the series, Officejet 6500 printer properties Ports.  If the printer is connected with USB port would be something like USB001:, for a network connection, the port type would probably be the re-discovery of the HP network or port TCP/IP Standard HP.

  Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.

• Reference Dell place 8 problems

  I have two problems that make this tablet almost unusable. First of all, a default along the top or right side screen (in landscape or portraait ISS, respectively) causes an image double when they are hit. It makes it impossible to use menus, the min/max button exit, the title bar buttons or menu when the application window is maximized. If I return the unit, so I can't use the taskbar. Instead, he thinks I'm trying to zoom. What a cluster. The other problem is with the on-screen keyboard. These people have not already heard debouncers software key? Why a key never need to repeat faster than the speed of auto-repeat? Filteer on for the love of heaaven duplicates! I wrote software debounceers. It is not the science rroooccket. A driver can do that. The debounce interval could even be configurable. I see keys repeat as fast as 20 by sseccond on thatNOTE from the ADMIN: profanity removed according to the TOU >. You can see the effects in this post: I left for your edification. It could have been a very good product, but for me, it's just an expensive paperwwwweight. Any suggestions?

  Thanks for the reply Jeff quick. I want to install the updates, and I'll see how it goes. I think I'll call customer service about the problem of aliasing touchscreen. "GAGH".

• BlackBerry® Smartphones put E-mail in place the problem

  I have a Curve 8520.  Currently, it is configured to receive e-mail messages from a Hotmail account and a gmail work account and these work very well.

  Got rid of my Hotmail account and have opened a personal gmail account, so I migrated my Hotmail mail on Gmail.

  However, when I went to set up my new personal gmail on my BB account, I get the following error:

  "Your device has encountered a problem with the application server.

  I tried to restart.  Then, I turned off the unit and removed the battery and the sim.  I then tried to remove the battery and sim with the appliance.  None of this has worked.

  It's so frustrating!  Any ideas?

  You can access your e-mail BIS established accout from your PC too.

  http://www.BlackBerryFAQ.com/index.php/Where_can_I_log_into_my_BIS_account%3F

• Photosmart 5510 eprint, put in place the problem

  I can't set up eprint by using the front panel on my new wireless printer - it successfully connected to my home wireless network and I am devices able to print from our cell phones and mobile - but when I try to set up eprint by using the front panel menu, it displays an error message - server - unable to connect connection error try again or enter proxy address

  I don't know what my address proxy or where I should look for it - can help you please?

  I am connected to the internet by using Virgin Media broadband via a belkin G wireless router

  Thank you

  Problem 2

  I found the solution to set up my service eprint with his new email address for the printer - however sent 2 emails to print from my Windows Live Mail email account nothing happens: I can not connect via the new e-mail address registered with the printer - even though I have answers to my box saying that the print job has been received and ready for printing

  I can always send and print documents via the print command wireless - then why not via email?

  Can anyone help please?

  Thank you

  Thank you - you're a star - maybe it works - so simple - HP must include in their set up info / troubleshooting?

• Eprint HP5510 put in place the problem

  I have an active eprint HP5510 which I use with Windows 7.  The printer is showing as connected to my wifi, but I cannot get it to connect to the web and cannot therefore set up eprint. Can someone help please, I tried everything.

  CDP176,

  No problem, we have a little more things that we can try!

  The next thing I want to do you is set a static IP address and DNS servers for your printer.

  Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.

  After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.

  Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).

  Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.

  For the primary or the preferred DNS server, you will want to enter 8.8.8.8.

  For secondary school or another DNS server, you will want to write 8.8.4.4.

  Click on apply and when the message appears saying that the changes have been applied, press 'OK '.

  Press the power button on your printer, wait that it completely power off and press it again to power it on.

  After doing this, go ahead and try to activate ePrint again.

  If these steps do not work, let me know and I'll see if there's anything else I can do for you.

• Digital Editions put in place the problem

  I ask your intervention, remotely on my computer screen, using team Viewer, to reset the 'digital publishing problems ".

  I downloaded the digital Version of the editions for - window 7 - but the page remains white.

  There is no way to advertise any document in the table, neithe the bibliotec.

  Editions E-book existing, stored in my download file, can also not transferred: the indication: "activation herror" come al the time's up.

  I'm really desperate, because it is not posible to store my e-book in Digital Editions.

  Please contact my to solve this problem.

  Thank you.

  Harro Draheim

  St. Feliu of Ll. (Barcelona)

  Close Adobe Digital Edition.
  Rename my folder of digital edition in the folder my documents

  Start Adobe Digital edition now and download ebooks again...

• EA8500 put in place the problem

  Current nine EA8500 to install it on a system Win10 (fully updated).  Router works through internet modem signal cable to the computer.  But the computer can not find the router.  I tried 192.168.1.1 via a browser (PW 'admin').  Can not find the router.

  Checked the address IP address of the computer and it only is not the IP address of the router.  Tried ipconfig/release times logged in and unplugged the cable modem (but connected to the router).  Restarted the computer, reset the router, tried the button manual WiFi on the back of the router (no SSID when the light is on), has attempted to access linksyssmartwifi.com (get message that 'my Linksys router requries series EA Smart WiFi Firmware', so that the router is not be seen via the site web eihter.)

  It's as if the computer does not know that the router is there.  Was chatting and they basically walked me thorugh the things that I had already tried.

  Thoughts?

  MikeM01 wrote:

  Current nine EA8500 to install it on a system Win10 (fully updated).  Router works through internet modem signal cable to the computer.  But the computer can not find the router.  I tried 192.168.1.1 via a browser (PW 'admin').  Can not find the router.

  Checked the address IP address of the computer and it only is not the IP address of the router.  Tried ipconfig/release times logged in and unplugged the cable modem (but connected to the router).  Restarted the computer, reset the router, tried the button manual WiFi on the back of the router (no SSID when the light is on), has attempted to access linksyssmartwifi.com (get message that 'my Linksys router requries series EA Smart WiFi Firmware', so that the router is not be seen via the site web eihter.)

  It's as if the computer does not know that the router is there.  Was chatting and they basically walked me thorugh the things that I had already tried.

  Thoughts?

  Connect the computer directly to the modem ISP. If it works then computer and the ISP connection is good.

  Then with the ISP modem unplugged EA8500 connect the computer via Ethernet and LAN port and see if you get an IP address. If you don't get an IP address, the EA8500 is probably defective and I recommend swapping\RMA for other EA8500 to the store of purchase.

  The IMO the EA8500 is an excellent router.

• Hola problemas con 8 GB of ram

  I have a team of Core I5 segunda generación, una tarjeta grafica of 1 GB, 8 GB of which currently utilizo 4 GB Memoria Ram y Disco Duro 1 Tera.

  Con MI operating system are Windows 7 Ultimate 64 bit, 8 GB of memory Ram instalarse al, pausa to sell conocida blue screen, are necessary retirale otra Memoria 4 GB, para as solo use 4 GB of ram there good work.

  What puedo hacer?

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Toshiba TL 938G - application remote dlna and toshiba problem

  I try to use the remote control feature and toshiba dlna app, but I can't when the TV is connected to the network via wifi.

  If I connect wired lan and pc or androind tv phone WiFi then everything is ok.
  I have tryied three different routers, but if all devices are connected wireless is not possible.

  I can use the dlna via wifi from my phone to the pc.

  The problem is with toshiba tl938g.
  The tv connects via wifi takes ip address normally and I use toshiba places without problem.

  I assume you mean on Intel WiDi because I found your other son on the Intel WiDi.

  You can use only one WLan connection at the same time.
  As far as I know that if you are already connected to the network using the wireless network card, you can not use WiFi to connect the mobile phone.

  So if you want to connect via Intel WiDi TV mobile phones you have to unplug the TV from the router.

• How did resolve you the following problem when you run the windows backup utility? Error code 0 x 1000037 failed due to shadow copy.

  I tried to look for the answers and on google but the problem persists. Do not understand the junction / point analysis answer either!

  Hi Rohit,

  The problem was solved when I did a full Scan using the microsoft security essentials program. He has taken a few hours to analyse and found two problems with Java. I removed those and the backup took place without problems.
  Thank you

• Problems with the license?

  I have Acrobat Pro and I never had any problems.

  Finally, I wanted to download a ticket, but I was brought back to the Acorbat page. Here, I should download the player... Even if it's nonsense, I did and it still does not work. Now I get every time I have download the pdf, the following message: look at a pdf documents in the browser you have lunch Adobe Reader and accept the end user license agreement, leave them and then restart the browser.

  I can't find this license, what do I do? Previously, all took place without problems?

  Thanks for help

  B.

  Okay, this is more unusual, but even when the solution is almost always to save from the Explorer, THEN open in Acrobat or Reader.

  So, did you launch Adobe Reader as he suggests?

• Re: NB 100 - screen does not come on at the beginning toward the top

  My father inlaw just bought a NB 100, he's old so he gave it to me to put in place, the problem is that when I turn it on. the display lights. is there something I'm not? where can I find the user manual? is there one online?

  Hello!

  Have you tried an external monitor?
  Maybe the internal monitor is defective or say the FL inverter and must be replaced.
  Check it!

  Good bye

• Memory shared vga s1800-804

  Can I expand the memory, used from the 256 MB installed, for the trident vgacontroler, with software, update the bios?
  It is 8 MB now, during playback of a dvd, the screen is a bit slow.
  Installation of 128 or 256 MB make no difference.
  Thank you
  Rob

  Hello

  It is possible that the CPU is too busy and you can try to disable some applications that are running in the background. Trough shared memory processor help map graphic and on this path, graphic representation take place without problems.