Reference Dell place 8 problems

Similar Questions

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd

• Reference Dell place 7 does not connect to Verizon iPhone Personal Hotspot

  My Dell place 7 recognizes my hotspot, saves the password, the signal strength excellent; by pressing "connect" has no effect. This personal hotspot works fine with my Dell Inspiron laptop, I have exactly the same problem with hotspot personal from my iPad. I use the latest version of iOS 7 on each device from Apple.

  Please tell us how to get the 7 meeting place to connect to the hotspot.

  There is a separate devices message board mobile http://en.community.dell.com/support-forums/mobile-devices/default.aspx

• Reference Dell place 11 Pro shipping disappointment

  I am writing this primarily to express my frustrations and I hope that someone at Dell will take notice because I think to complain to someone on the phone at Dell will fall on the deaf ears and will be a waste of time.  It seems that we, the consumers are at the mercy of Dell and for me, this is unacceptable.

  A bit of history.  I ordered a Dell coming Pro 11 the day where he was available to order (11/8).  I had a few changes, I had to make to the order, remove their extended maintenance guarantee and remove the stylus and the keyboard - no change in reality have been made to the tablet itself.  This has been done on 11/11.  I never received a confirmation email from Dell telling me when should I expect my 'New' order, but I have received an order number of the person that I spoke, which was the only way I could follow the command.  The 'new' had a date of expected delivery of 12 to 18.  It seemed reasonable to me and I was happy to wait and excited.

  In the meantime, I started to order accessories - screen protector and a 64 GB MicroSD in preparation for the arrival of my tablet.  18 I still had not received my being shipped order notifications and Dell sent an email about why, or when I would expect it.  I had received SEVERAL phone calls indicating that the order was in production and should be here 12/18.  I think that on the 18th or 19th I checked the Dell order support site to see that the issue had been delayed until 02/01/2014.  I was shocked... and spoke to the person who asked me the prescription being in production about why it had not been shipped.

  The 2nd came and went, and still, only, I received a phone call from the rep of Dell indicating the order had been pushed back to 9, then on the 9th, declaring that it had been postponed until the 16th.  This morning I checked the Dell support site to be notified that the scheduled delivery date is 01 23, 2014.

  I canceled the order this morning because I don't think I, or someone else should wait indefinitely for their order to arrive once his promised summer unnecessarily.  The "estimated delivery date" is a joke and does not reflect exactly any time in which the order could actually ship.

  Looking on the Dell website, you can order a Tablet Dell place 11 Pro with the 16/01/2014 estimated shipping date all the way until 06/02/2014 depending on the type of Tablet that you choose.  I know I'm not the only one who had this problem and I hope that more people shut up someone at Dell reviews and change the way they do business.

  I work in the COMPUTER industry and I am highly disappointed by Dell.  For now I'll only order Dell hardware for the company I work for. However, we will have to reassess these orders as well.

  Thanks for listening/reading my rants, and I hope that others have had better luck I have.

  Michele

  Hi Michele Riley,

  Please this post in the forum for more quick help customer care.

  http://en.community.Dell.com/support-forums/customercare/

• Reference Dell place 8 just out of warranty and dead now?

  Hello

  Everyone has a glue on Earth how to contact Dell technical support? My Tablet has acted weird for a while, but now it is completely dead and the custom lights at all. Previously, I got past pressing buttong for 10-15 minutes sometimes and then after a while it just turns itself off again. So now it's offshore and dead.

  I searched web pages of Dell support for direct contacts, but not luck. And worse, that it turns out that the warranty has ended in 12/09/14

  What a *.

  Reference Dell of mobile devices (phones) & tablets
  1-800-308-3355 24 / 7

  http://www.Dell.com/support/contents/us/en/19/category/contact-information/technical-support?c=us&l=en&s=DHS&CS=19

• Reference Dell place 8 7840 headphone / Audio Jack problem

  My place 7840 arrived last week and I really like this thing. Today, I finally plugged headphones into the phone 1/8 "plug and immediately heard a rehearsal 'click' sound, strong enough and not affected by volume or muting. Quickly, I rebooted the Tablet, then tried again in Airplane Mode. The same problem. Checked my sound settings. Everything was normal (Bluetooth audio works fine). Tried another set of headphones - same problem.

  Everyone fell on this? My helmet is defective?

  Thanks in advance.

  UPDATE! I found the problem. Problem solved.

  I use the Dell Folio, which came in the form of a Pack, and he made sure the headphones were enough to play sounds and 'feel' as it has been connected - connection but it wasn't quite the case. Making felt a little loose, so I gave the helmet a good shot and he well engaged. No more rattling! I am back to enjoy my place of 8.

  Hope this helps someone else.

• Reference Dell place 11 Pro - problems with the PXE boot

  Before buying a large number of these tablets (11 Pro 7130 venue), I have to ensure that they can be deployed from MS Configmgr (2012). So far, I have no chance for our test model to perform a PXE boot.

  Following the instructions documented by Dell here:

  

  I have a USB dongle to Ethernet Lenovo based on the AX88772B chipset... that is supported according to the documentation. However, try to perform a PXE boot, the screen hangs on the message:

  -----------

  check for the presence of media...

  on ipv4 pxe boot

  -----------

  After awhile, it starts up and then hard disk. BIOS version is A14.

  Any help would be appreciated!

  We have solved this problem by following these:

  

  

  .. DHCP basically has to manage a little different UEFI devices.

• Reference Dell place 8 pro (32 gig) camera problem

  Just recently received this nice camera for Christmas the year last December. In the first week or so of the use of the Tablet, the device has worked without any problems at all, but recently all trying to use the camera doesn't seem to work at all. Any time I try to use the app to default camera it will load properly (from what I can tell) but my screen becomes dark gray while the light near the front facing camera for shining beings. I can drag to the previous photos in my camera, but for the life of me am unable to take pictures with my tablet, I also tried to use other applications of the camera to see if there was something wrong with the preinstalled but app that didn't work and just systems equipment check showed that hard work was working properly. Does anyone have a fix for this at all?

  trying to remove driver was last updated in the driver image.  I had the same problem and that works for me.

• Reference Dell place 8 Pro WiFi question

  It seems I have disable Wi - Fi by the 'switch' itself or in "Airplane" mode, it of a pain to get and my hand "disable WiFi together, then re-enable joggin WiFi market til it seems take I'm trying to turn it back on." I am just trying to turn it off to save the battery immediately, but is this normal? A suite fix will come because i ' ts a pain at the moment.

  I have not tried the audio but I thought the problem with WiFi, put up-to-date are you tablet with all the venue of dells 8 pro drivers and software, if he says the driver or software is newer than what is installed to cancel this installer and move on to the next. Then, turn Bluetooth off then turn it back on and hold the Bluetooth, I have not lost WiFi yet since I have done this. Good luck!

• Reference Dell place 11 limitation

  Hello

  So I have a little problem with the way my Dell coming 11 Pro (4300Y) is strangled...

  Let me explain, as well, it seems as if the GPU speed is directly related to the speed of the CPU. This means that when the CPU is at 1, 6 GHz, the GPU runs at 800 MHz. When the mode is enabled, the CPU is at 2.1 GHz and the GPU is 800 MHz, so the max for the GPU is 800 MHz...

  Now, if this machine opens windows Explorer it starts basically the limitation which is ridiculous in itself.

  I managed to undervolt a little using the Intel UERX program, but it helps so much...

  When the CPU is strangled, the GPU gets strangled as well (which is obvious because the GPU is part of the CPU). So the CPU is going to< 1.6ghz="" and="" gpu="" goes="" to=""><>

  The way I understand the limitation on this machine, it works based on current consumption, to stay at the near 6W or something. This is where it gets interesting. With active mode, CPU goes up 2.1 etc and gets choked way down, but the GPU gets generally limited to a constant at 400 MHz. With mode disabled (and thus using LESS energy), when programs are run, gets strangled CPU and GPU gets strangled at 300 MHz... WHAT? How can he be the limitation when it is LESS common absorbed? This makes NO sense!

  That seems to be seriously delayed. At least choose us lighten a bit limiting! I don't mind plugging my tablet...

  The current situation is like having this cool car, but manufacturers have stopped people from driving more than 40 km/h in there to save gas! Would you buy a car like this?

  The limitation is gone!

  See my post

  en.Community.Dell.com/.../19576995

• Reference Dell place 11 Pro and Dock

  Hi all

  I have a Dell coming Pro 7130 11 and the docking station. I can't have an external display to work using the HDMI port or display connectors. I have 2 Dell E198WFP (1440 x 900), the two connecting using DVI inputs. Display sometimes appears, but does not have the resolution or refresh rate tries to run at 75 Hz despite being set at 60 Hz

  AFAIK drivers etc are all up to this date, the tablet can connect to an external monitor using the construction to the mini HDMI port without problem?

  Any suggestions, anyone please?

  Hi, the dock rarely works for me... the workaround I found is to unplug power dock and plug back in. (works 95% of the time, I get the monitor like that). It is with the 7130 model.

• Reference Dell place 7 clock/Web Browser issues

  If the clock of my new (1 month) place 7 continues to ruin - it will just start to run fast, fast sometimes up to 45 minutes.  I tried different settings, called the support of the other night (and they had to get the low volume button + power) and even a factory reset on it.  The other problem is to do, the screen flashes, just stay white.  He can do only 1 - 3 times after that "refresh you" Web page.

  These known issues or make me a defective unit?

  Am happy to say I did upgrade the venue and clock the problem is solved!

• Reference Dell place 8 Android + peripheral

  Hello!

  I would like to know if BT-keyboards can be connected to the gadget. Also I'm interested if this device allows to identify external hard drives are connected via USB OTG (with the external energy source, of course). Maybe wired keyboards can also be connected to 8 place Dell via USB OTG? Please, share your experience. Thanks in advance.

  Success! I bought the USB - OTG cable and connected an external HARD drive to the gadget via it - with interfaces USB 2.0 and USB 3.0 as well as with external and internal energy sources. They worked with Total Commander and Paragon plugin for download for free from the Google set. I suppose that a peripheral keyboard will work also. Great device!

• REFERENCE DELL PLACE 8 PRO 64-BIT

  I'm so pissed at dell for still not released 64-bit UEFI bios update, I mean all these games coming out lately only supported 64-bit and I mean games have requirments low super system the tabelt must be able to manage as fifa 15 and dbz xenoverse and P.15 GAME I CAN THINK AWAY is it that difficult just to get 64-bit? as they release a NEW BIOS UPDATE EACH MONTH of COUPLE AND No. 64 BIT SUPPORT STILL? the problem is windows 8 baytrail had a bug with 64 bit windows support wich fixed with the update windows 8.1 so what's the problem free your bios up-to-date already dell and cease to be a piece of * company

  Exactly they disabled the legacy and the entire reason, I had the tablet was supposed to install windows 8.1 and windows 7 together so when I relised that wasn't possible, I was upset, then I well well doesn't really matter island just install windows 8.1 64-bit so that I could make some of my network possibility of engineering then relised the thing does not even support 64-bit "ONE OF THE MAIN REASONS I GOT THE TABLET" If dell only not release 64-bit bios to breast this im months making sure that person doesn't know I have bought another new dell product because they are just greedy and selfish

• Reference Dell place 11 Pro 7130

  Hello

  I recently buy the renovated site of Dell pro 7130.

  The Tablet is absolutely fine and works very well it was preloaded windows 8.1 pro version.

  But in this tablet, my camera does not work when I start windows's default camera app that it says please connect your camera. See nothing in Device Manager, I tried to manually switch the unit Imaging section but failed each time, I haven't updated all the latest drivers from Dell still no luck, also check that the camera is turned on in the BIOS.

  Can anyone please help and give me the driver for this device. or doe which means my camera died completely?

  Hello

  I have EXACTLY the same problem AND I tried EXACTLY the same things you did... you found a solution to this problem?