Place of the ID

Similar Questions

• Back to the same place of the web page

  When I click on the arrow to the left happens to me on web page, I was ahead, but there also go to the top of the page, but not to the task, I was working, so I have to scroll down to this place. How can I get back to this place on the web page?

  Three ways:
  1. click the link
  2 {Ctrl + click} link
  3. right click on the link and use open link in a new tab

• Help. Window opens on the Firefox browser that says Application JavaScript and according to what he says 101. There is an OK bitton. When I click on OK, place just the window again and again.

  Help. Window opens on the Firefox browser that says Application JavaScript and according to what he says 101. There is an OK bitton. When I click on OK, place back the window. Then once again hit OK and box disappears when I move my mouse the same Monte box again. I even called Apple support. They tried things; got me well maybe some ting setbold textin Firefox preferences. It started right after the installation of update of Mac at the close. Any help, please. My browser is completely blocked (obviously) in this loop! [email protected] jason

  Hello

  Please check if this happens in Safe Mode.

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

  Safe mode disables the installed Extensionsand themes (appearance) in (Alt + T) Tools > Add-ons. Hardware acceleration is also temporarily disabled - manual setting is Tools > Options > Advanced > general > use hardware acceleration when available. Options > Advanced. All these parameters/additional custom modules can also be individually or collectively disabled/enabled/changed to normal mode of Firefox to check if an extension, theme or hardware acceleration is causing issues.

• When there are several tabs open, why the search always take place on the 2nd tab (first tab seems never to change the homepage) despite my selection of a different tab where to do a search on google?

  I have Mozilla Firefox 10.0. When I open it, it opens properly on the homepage in the first tab. Once I have another, or several, tabs opened, any tab is active, your google searches, I immediately takes place at the No. 2. Do not count how many times I go to the tab for example 4 to search (because I would compare with the page Web open in a tab 2), but it does still today the Search tab 2. It's very irritating. It must be a setting that went pear-shaped, but where / who? Any suggestions? Thank you.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Qosmio G50 PQG55A: remote control jumps two places in the list of the menu of WMC

  I have a version of the G50 (PQG55A-04J01Y) Aust and have just done a clean install of Windows 7 (64-bit).
  Everyone thinks that when using the provided Toshiba RC6 remote in Windows Media Center, it jumps two places in the list of the menu.

  I downloaded the driver Winbond CIR, Win7, but it makes no difference.

  Very annoying as it does on all manu lists and even ignores the channels while watching TV.

  Someone at - he seen elsewhere or have a possible solution?

  See you soon

  There is a package called Remote Control Manager.
  This driver is required to install the remote control of your computer.

  The package is only for Vista, but maybe you should try to install too

• Replace old hard drive with an SSD.  Nowsome keys on the keyboard no longer works.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Replace old hard drive with an SSD.  Now some of the keys on the keyboard stopped working.  Ex 'e' and 'b' keys no longer work?  Any idea what could take place in the disc replacement?

  Probably nothing, it's probably a fluke. Try resetting the SMC and the PRAM by iMac Intel SCM and reset the PRAM. If this does not work, try a USB keyboard to test, if it works then your original keyboard has failed and must be replaced.

• While hovering just above my trackpad, it will be 'click' in itself Apple cleaned my trackpad and assured me that there is no place on the Mac to set or change this option.

  While hovering just above my trackpad, it will be 'click' in itself Apple cleaned my trackpad and assured me that there is no place on the Mac to set or change this option.

  Which option?

• import old photos and you want to place in the correct timeline

  Hello

  I want to import images recently scanned "prior to 2002", the year I went digital... How can ensure me Photos to place in the correct timeline flow? That is, do not place them after the photos I took yesterday... But well above 2002?

  THX.

  Change their dates the correct dates - for Photos all photos are sorted by date and time (all the pictures, they are sorted by date imported photos)

  You can change the dates before you import using Preview software or third party or after importation using the time command to settle in Photos

  LN

• Where is the best place and the best prices to buy LCD 15 "display

  I want to buy a 15 "TFT laptop awkward girls...
  any suggestions about where is the best place and the best price?

  Post edited by: peterrothwell

  Hi Peter

  As you probably know the laptop LCD display is one of laptop parts expensive (apart from the motherboard).
  I found a few new LCD for around $ 300

  CA? s your choice. Either you will be by a new one for $ 300 with warranty or you will try to buy a second hand one.
  I recommend to check big famous auction site for some deals! ;)

  Good luck

• Example: Pavilion 550qe: have just got a QED Pavilion and can not find the place where the monitor.

  Have just got a 550qe of Pavilion and can not find the place where the monitor.   The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC.    There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.

  Hello

  Can't find the official specs of HP. But since the following specifications

  |-Intel-Core-i7-|-Windows-10-|-Silver.product.100241370.html http://www.Costco.com/HP-Pavilion-550qe-desktop-

  There

  Ports:

  • 2 x USB 3.0
  • 2 x USB 2.0
  • 1 x HDMI
  • 1 x VGA
  • 1 x jack Headphone-out/microphone-in the drop-down list
  • Multi format card reader

  Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?

  Kind regards.

• After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  After a microsoft error message, my laptop keyboard has sudenly has started to misbehave - characters are two-way and in case added places after the original character. Clues?

  Care to be more detailed?  What version of Windows?  What is the brand and model of the laptop?  How old was he?  Have you contacted the provider support?  What has changed on your PC between when it was last and now?

• Set up Windows Live Mail on your laptop. I want to put in place on the enamel of my laptop but I do not have to configure settings.

  I have a student email account that goes through Windows Live. I want to put in place on the enamel of my laptop but I do not have to configure settings. Where can I get this information?

  If it's an Outlook Live account, see here: access your account using IMAP or programs email POP

  Otherwise, you must contact the Helpdesk of the institution or the Web site to find out how to set up your account in your e-mail client. You don't tell us what e-mail program you use.

  Noel

• I want to be able to move freely photos on a Windows Word page, but the photos keep snapping it back in place on the margins. Is it an alignment etc. function that I can disable so I can move photos with the cursor?

  I want to be able to move freely photos on a Windows Word page, but the photos keep snapping it back in place on the margins. Is it an alignment etc. function that I can disable so I can move photos with the cursor?

  I want to be able to move freely photos on a Windows Word page, but the photos keep snapping it back in place on the margins. Is it an alignment etc. function that I can disable so I can move photos with the cursor?

  =================================
  Change the text wrapping...

  In Word 2007... I'm going to... Format / dressing / thanks to...

  Then I can use the arrow 4 positions to drag photos anywhere
  I chose.

  If you want to drag the photos on the page...
  I don't know how to do this. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner?

  Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner? who can be recovered later in the case of the unsuccessful cd/dvd writing?

  Hi Usmansami rana,

  Integrated into the files of caching of Windows Vista to temporary folder when you start burning discs in Windows Explorer or by using a burning program. However, the temp folder is get deleted as soon as the burn completes successfully or not and you will not be able to recover the files.

  Hope this information is useful.

• Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device. Specifically, an audio book downloaded via Overdrive?

  Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device.  Specifically, an audio book downloaded via Overdrive?

  Hello
  
  1. what type of files are in the audio book? Could you provide me with the file extensions?
   
  If you delete the information or files audio books could not show some information. I wouldn't recommend allows you to delete the files. If you want to remove them, you can contact overdrive support.
  
  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• LaserJet P1102w: Address in the wrong place on the envelope of 6 3/4 with LaserJet P1102W

  When I print 6 3/4 envelopes in Word since my Windows 7 64-bit system to a new LaserJet P1102w address is correctly centered from top to bottom, but it is so far to the left half of the address is cut off from the envelope. The same settings printed correctly with my old HP LaserJet 1022nw printer.  Can HPW I fix?

  Bear with me a moment... My printer is a different model than yours, but here's what I discovered. Firstly a bit of background. My old HP B209 printer would print envelopes card without problem, but when I started using my printer HP Photosmart 6520, it would just spit in the envelope without printing the addresses, even if I chose an envelope of greeting card in the printer properties. HP could not solve my problem and other sources on the HP Forum said that HP just made a blunder in designing is not the printer to print envelopes of greeting cards.

  Finally after a year or two, a member of the HP Forum suggested I have try select the C5 envelope in printer properties and that is, the envelope printed however; the address printed back ok but send it to the address has been out of the envelope with only a partial address display. For some unknown reason, I selected 'options' on the printout of the envelope (a feature I've ever used) and learned that I could work out where the return address and send it to the address were located on the page. When you click the 'Options' button you can adjust the situation where each address appears on the page. You change the 'top' and 'left' numbers you can watch address icons (which appear as straight lines) are moving on the envelope. Pass each address around there where you want it and then try to print the envelope. If each address is too right or too far left or should be raised or lowered just play with the settings until the addresses where you want. Write your settings on a piece of paper and stick it on the side of your computer tower or someother convenient place so you can store these settings in the future.

  Now... don't forget to change the envelope size to the default envelope size you are using in general. I always use a #10 envelope business for my personal correspondence. Otherwise, the next time you go to print a standard envelope (what size is that you are using) the parameters will always be in place for the envelope of 6 3/4 that you use and addresses does not print correctly. You will not need to change the settings of your default envelope size because it will always go to the value by default (unless you change it) hope this solution works for you.