After the hardware upgrade XP

Similar Questions

• My apple ID became invalid after the recent upgrade to ios 9.3

  My apple ID became invalid after the recent upgrade to ios 9.3. What can I do to reactivate the ID? I tried to reset my password several times even.

  For now, I am unable to pay for anything because I can't access the function of apple on the phone pay.

  Hello

  Follow the instructions here, include a link to get help from Apple with your Apple ID:

  If your identifier Apple is locked - Apple supports

• The hardware upgrade on HP computers

  Here is a video that illustrates the hardware upgrade on HP computers

  I hope this helps.

  Good luck!

• How to keep the content of persistStore after the software upgrade?

  I use persistObject to store a variable in the program, once I changed some work and update the new version of the device, I found that the historical data are passed. How to store history data after the software upgrade? my software is auto-start at the start of the unit, in order to update you have to restart the device.

  If the size of the object you store changes, and then it gets deleted.

  If you change the name of the package where you saved the object, then it will fade.

  I usually have with ropes to keep them always upgrades throughout.

• BlackBerry Z10 problems after the software upgrade

  After the software upgrade on my z10 I not receive notification for my text, whatsup and other notifications in my hub. Pls help

  I would try to reset your Hub first.

  Open the Hub and from the upper right corner, with the fingers sliding down to the center of the screen five times.

  You will see quick white screen, then a black screen with the text that the hub is set to zero.

  If after a day which not resolves your notifications, remove the twitter account of your settings > accounts, restart the BlackBerry, and add the new account.

• problems with rv042g after the software upgrade

  After the software upgrade it reboot the router on every 45 seconds

  I tried this tool from Cisco RV0xxV3_FirmwareRescueUtility_v4.0.0.7 Web site without success, the problem is there, is one way that you can get the router up and running again?

  Can I run a TFTP server and download new software, or I ther a FirmwareRescueUtility for rv042g?

  Mogens Demmark

  The first firmware comes with RV042G is 4.2.0.03, so the firmware utility rescue v4.0.0.7 would not work.

  Given that your will to power cycle automatically RV042G every 45 seconds, and the problem has not disappeared after that you did a reset to factory default, the unit needs a new firmware downloaded. Please, try the following steps.

  1. disconnect the power cable to the unit.

  2. hold the reset (using a paperclip) button, while plugging in the power cable.

  3 look at the DIAG LEDS.

  4. release the reset button when you see the DIAG led are flashing.

  5. a flashing DIAG indicates that the unit runs in start mode, and a server tftp on the device is waiting for a picture of fresh firmware to the address 192.168.1.1.

  6. set up your PC with an IP address in the subnet 192.168.1.x, e.g. 192.168.1.100 and specify as default gateway 192.168.1.1.

  7. try to ping the unit with 192.168.1.1, and you should see a response from the unit.

  8. run a program client tftp (with a command line) and push an image good firmware, for example

  TFTP-I 192.168.1.1

  If the procedure above does not resolve the problem, contact the support center for RMA.

• How to restore licenses Playready DRM for TV recorded after a hardware upgrade?

  See the thread that I started:
  http://www.thegreenbutton.TV/forums/viewtopic.php?f=5&t=1109

  At the end of this thread for my question about what breaks the Playready DRM, I stated here:
  http://support.Microsoft.com/kb/891664

  If there is an updated version of this KB article applicable to Windows 7 with Windows Media Player 12, then a pointer to such an article would probably prevent the need to respond to everything that follows.  For now, I guess there is no update instructions for restoring licenses.

  In time, I was reassured by Microsoft KB article that I could upgrade my HTPC hardware without losing the ability to play shows I had already recorded.

  I don't think much more on this subject until recently, when I decided that the time had come to make an upgrade.  So I went back to the article to see exactly what I had to do in preparation for the upgrade.  The first thing he says for me to do is to back up my licenses.  However, I am running Windows Media Player version 12 (which is what came with my Windows7 Home Premium), and it doesn't seem to provide a mechanism to back up the licenses.  This means that no such possibility of license-recovery-after-upgrade is available for me?   Or are there other mechanisms to back up my licenses?

  Even if there is another way to back up the licenses, I see that restore them after the upgrade still requires a feature that my version of Windows Media Player does not.  Then I also need access to an alternative mechanism of restoration.  Is this one?

  Looking around Windows Media Center, I can't find anything about the license management here either.

  Considering the article like a Kipper full in Windows 7, my ultimate real question is that in the header for this post.

  TV record types we are talking about here have copy - once protection and are recording using Windows Media Center has a CableCARD tuner.  I have a lot of them that I am not prepared to remove spied.

  Hi DavidVanserschel,

  You may be able to manually reset DRM licenses. Take a look at the steps in this thread.

• 2011 21 inch iMac won't start after the SSD upgrade

  Recently, I upgraded my hard drive for an SSD via a computer repair business in my neighborhood, I also upgraded the ram, but I don't think it's in the case. On a two weeks after the upgrade, my computer don't turn on more. I took it to the genius bar and they told me that the DSS had "failed." So of course, I took my computer to the computer repair company and they ran some tests, discovered that the hard disk does not (according to them, he only read this way because the apple store has run the test for a normal hard drive and not an SSD). I'm not super computer savvy, so I took their word for it.

  Now, however, it has been nearly a month and my computer refuses to activate once again. Previously, it has worked well, the fans were running at full blast - what I knew would be a problem (although the repairman told me that they 'fixed' this issue too). So the first time, I downloaded a program called SSD fan control and set the fans to run in silent mode. This second time around, I realized that it was probably a bad idea because it could lead to overheating, so I put manually the fan speed so that we could hear still run, but just not as loud.

  I tried the reset SMC, but no result. Right now, I unplugged everything including disconnect it from the power strip.

  Any other experience of power with a new SSD failure? Is there anything else I could try at home before contacting the computer again repair business? I would not be able to reach at least until tomorrow, and I'm really curious to know how they managed to get my computer back on the first time.

  Also, I've been out of my warranty period for about a year, so that's why I thought that I was not risking too much by exchanging the original for one SSD drive.

  First of all, the original in Middle 2011 iMac hard drive had a temperature sensor integrated in the drive.  More new or replacement of those who do not.

  Other World Computing sells an Apple certified temperature sensor that plugs into the SATA cable.

  https://eShop.MacSales.com/item/OWC/DIDIMACHDD11/

  I just put a 2 GB Western Digital Black in mine, with the sensor.

  I suggest all first, reinstall the OEM disc and see if it boots.

  Put the SSD in an external enclosure and see if it runs...

• A few questions regarding the hardware upgrade and the games on Satellite Pro 2100

  Hey,.

  I thought that posting this here because it's more about the lines for the games I could think on another topic.

  I'll get to the point... Basically, I bought a laptop from a guy that my friend knew. He barely used this laptop and didn't know anything about computers, and he tried to avoid as much as possible. So he got rid of this laptop for me for real cheap.

  Now I got it, I had expected either of two things with the laptop.

  (1) what I'll use it so I can sit in his bed and travel a little bit while having files, movies, music and internet access. (it wasn't my main idea)

  Or

  (2) it allows to play video games on it, or to update, so I have a better chance to do so.

  I was hoping to get for video games, mainly for my brother to use because his computer is lagging a lot while playing world of Warcraft. I was hoping that this notebook would give him a better experience for a while.

  But as I was installing the game on this, I noticed that the disk space is low, so I'm going to buy an external hard drive, so I can send files between the PC and the laptop, and I got an error message saying that the RAM was under "minimum requirements" for WoW.

  So I know that I got to level it with something big, but I know not what, so I'm not quite sure that this laptop will run the game at a decent rate. So I thought that I turn to a computer forum and ask.

  It's my laptop;
  [Satellite Pro 2100 PS210E | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&BV_UseBVCook = Yes & PRODUCT_ID = 45659 ie]

  This laptop will do the job don't you think?
  Or it will be better for simpler things, or less if I had the ram to 1gig?

  I don't know much on the laptop, and I'm not really willing to spend too much on fixing, if it's just a change of the ram, then it wouldn't cost much for than to upgrade around 1gig.

  Hello

  First of all, I must say that this notebook belongs to an older series laptop.
  It was equipped with the 1.8 Celeron CPU, 256 MB RAM, 20 GB or 30 GB HARD drive and a 16MB graphics card internal.

  What you can do is upgrade the RAM up to 1 GB (2 x 512 MB) and the HARD drive. But I think that the maximum size of HARD drive that would be recognized by the BIOS is 120 GB.
  I think that the laptop supports one IDE controller and it limited because of the 28-bit LBA HARD drive size.

  So finally, it is important to mention that you can not pass the graphics card because it s soldered onto the motherboard. Upgrading the CPU is not possible or very difficult.

  I come to the conclusion that you will not be able to play games of new generation on this machine. The hardware specs are maybe too low a few simple games would run on this laptop but I'm sure that other newer games will not run smoothly.

  Welcome them

• The hardware upgrade

  I have a hp pavilion m9800me desktop pc. I thought about upgrading the hardware.
  is this possible? I would like to upgrade the video card. the default video card that came with the pc is ati radeon hd 4650 1 GB ddr2. the operating system is windows 7 64 bit.

  Here are the specifications of your HP Pavilion Elite m9800me desktop and it is card mother IPIEL-A3 (Eureka3). According to specifications, your computer has a location of graphics PCIe x 16 (currently occupied by the HD 4650) and 3 PCIe x 1 for other cards slots. The computer has a 300 watt power supply which limits your choice of graphics for the low-end models. If you want to run mid-level in the class of game cards, you will need to upgrade your diet as well. The Corsair CX500 and CX600 are great choices and known to adapt to most cases of HP. Please see from Dave G "Guide to choose a discrete video card" for more information on this subject. Alternatively, you can upgrade the memory and the CPU in your computer as follows:

  Memory:

  Four DDR3 DIMM sockets (240 pin)

  Supports DIMM DDR3 2 GB modules

  Supports dual channel memory architecture

  Supporting speeds:

  PC3-8500 1066 MHz

  PC3-6400 800 MHz

  Memory non - ECC, unbuffered

  Processor:

  TDP: 95W

  Series Intel Core 2 Quad (Yorkfield core)

  Series Dual Core Core 2 Duo Intel (core Wolfdale)

• DRM is missing after a hardware upgrade.

  I recently updated my motherboard computers and processer and now it seems that the DRM files are missing which means of course that I can't play any of my procected DRM music files, even if my computer has a backup of the license. To be able to play my new music I need to re - install Windows XP or y at - it another way of retreving my missing data of DRM?

  I am currently using Windows XP Home Edition, Service Pack 3.

  Before you change the hardware, you must back up your licenses.
  I hope that this article will help you:

  "You may be unable to read content protected after your computer hardware changes.
    <>http://support.Microsoft.com/kb/891664 >

  HTH,
  JW

• Spontaneous running after the Vista upgrade

  I have a portable dv2000t PC (EQ883AV) that I bought in 2006.  It has a "Vista Capable" sticker on it.

  I won't bore everyone with details as to why, but my situation demanded a new installation of Vista Home Premium.

  Everything went well except that when my laptop is put into Hibernate it lights up spontaneously after several hours.

  I scoured the forums here and google around but you haven't found someone else who has had this problem.

  Has anyone ever heard talk about this?

  Thank you

  Bill...

  Google-ing a little more and I found an answer to this embarrassing problem.

  First, a little more in detail about my specific problem and some problem reports I found there in the ether.

  When I'm done using my computer I press the power button that is set to put my computer in hibernation.

  Some mornings, I'd come downstairs to find my computer with the BIOS Power-On password 'Password' command prompt is displayed.  Other morning my computer not turn on because the battery was empty.

  Others have reported their computers would wake up from standby or hibernate on several occasions, some repeatedly and then to go back to sleep.

  So what's happening?  It is all linked to timers.

  A program can tell Vista wait awhile and then call executable code to an address that offers the program.  This is an example if you use a program like Microsoft's Outlook email client where you can set a task reminder for a later date and time.  Outlook says Vista wait X number of hours, and then run some Outlook code.  This Outlook code then displays your callback.

  But what happens if you put your computer in standby or Hibernate?  Well, before Vista you would get your reminder.  Or maybe your anti-virus would not happen.  Or maybe Windows Update would not be executed.  Vista has changed all that.

  When Vista goes to sleep or into hibernation, it first checks to see if there are defined timers to turn off.  If there is, it takes the next set clock turns off and affects an alarm in the hardware platform for this day and time.  At the level of the material it is usually an alarm which belongs to the time clock (RTC) real.  Once sets Vista the RTC alarm it will sleep or standby extended.

  When the RTC alarm goes off your system lights up.  Vista continues and is notified of the alarm after having exploded.  Vista checks its list of timer and executes the code associated with the timer when turned off.  When the code is actually running Vista go to sleep after two minutes of inactivity.

  My problem has been compounded by the fact that I was using the BIOS Power-On Password.  My computer would sit at the prompt "Enter password" until I fell on it or the battery ran down.

  What is the solution?  It's pretty simple.  Click Start, all programs, accessories, command prompt.  Run these two commands in the command prompt window:

  powercfg - setdcvalueindex scheme_current sub_sleep bd3b718a-0680-4d9d-8ab2-e1d2b4ac806d 0

  powercfg - setdcvalueindexGUID_mode scheme_current sub_sleep bd3b718a-0680-4d9d-8ab2-e1d2b4ac806d 0

  What do these commands?  You change the setting of the attribute "allow windows automatically wake your computer from sleep on a timer for scheduled tasks and other programs ' (which is honestly what it's called!) in the subgroup of the sleep of your current Windows power plan settings.  The first command applies when you are running on electric power and the second when you run on current continuous (drums).  You can re-enable each attribute at any time by re-running the command change the 0 value at the end to 1 (0 = disable, 1 = turn on).

  WARNING: If you disable these settings, then your computer will NEVER wake up from sleep or hibernation to perform scheduled tasks.

  You can read and learn more about the profiles of power here:

  http://download.Microsoft.com/download/a/d/f/adf1347d-08dc-41a4-9084-623b1194d4b2/PMPolicy_Windows.docx

  and here:

  http://download.Microsoft.com/download/0/0/b/00bba048-35e6-4E5B-a3dc-36da83cbb0d1/Optimize_Power.doc

• After the recent upgrade Indesign creashes at startup. Error related to FontManager

  CTC 2015 last rev.

  S.O. Windows

  After mid June upgraded Indesign crashes at startup.

  Windows reports:

  Nome dell' application che ha generato error: InDesign.exe, version: 11.4.0.90, time stamp: 0x574c8600

  Nome del modulo che ha generato error: MANAGER of FONTS. RPLN, version: 11.4.0.90, time stamp: 0x574c88c4

  Exception code: 0xc0000005

  Compensate for the error 0x000000000006e64d

  ID processo che ha generato error: 0x15b4

  Ora di d dell' application che ha generato error: 0x01d1cc575009eecd

  Percorso dell' application che ha generato error: C:\Program Files\Adobe\Adobe InDesign 2015\InDesign.exe CC

  Percorso del modulo che ha generato error: C:\Program Files\Adobe\Adobe InDesign 2015\Required\FONT CC MANAGER. RPLN

  Segnalazione ID: 908d0d08-384a-11e6-9da9-386077ce4453

  This has happened on 2 different PCs, a resolved after reinstalling SW, the other problem woth yet.

  Hi all

  We are aware of the problem where InDesign crashes on launch while working with library files stored on a network location.

  We are working on resolving the issue and for the moment, please try the solution that we have identified.

  To work around the problem, please follow the steps below:

  Clear the Cache InDesign either by renaming the Cache folder or deleting it altogether. (It is best to rename the folder)

  The location of the cache folder: -.

  Windows XP: C:\Documents and Settings\Settings\Application Data\Adobe\InDesign\------\Caches\

  Windows 7 or 10: C:\Users\\AppData\Local\Adobe\InDesign\-\Caches\

  Macintosh: Drive hard/users/InDesign/Library/Caches/Adobe///.

  In addition, if your workflow requires you to work with the (different) library placed on the network, please make sure you close the library panel before leaving InDesign.

  Concerning

  Afonso

  (InDesign engineering team)

• CF Apps 'broken' after the server upgrade.

  My office has a configuration where we have a server and a live server development.  Everything gets coded and tested on the development server before be copied in the direct.

  Last week, the server was replaced by a new machine.  After the upgrade, we get errors on several pages of CF.  The errors are as follows:

  Could not find the ColdFusion Component or
  Interface 

  It's the component is there, and the app works fine on the development server.

  I tried to juggle the path within the tag, cfinvoke, with limited success.  If all the files are in a directory, removing the path seems totally to fix.  But if the application.cfm is in /directory the cfc is in/directory/components, then juggle the path is not helped at all.

  I think it is maybe a CF Administrator thing, where some mappings on the old server were not duplicated on the new.

  It is very difficult to solve because it works very well in my development environment.

  Any advice would be appreciated.

  BreakawayPaul wrote:

  I think it is maybe a CF Administrator thing, where some mappings on the old server were not duplicated on the new.

  I think you're probably right.

  There was probably a mapping defined in the Aministrator CF under "Mappings" to find out where the live components.

• After the recent upgrade, the disappearted function (on the Internet) download of the toolbar.

  After a recent automatic upgrade several days ago, the download of download Internet swirling icon function disappeared. Can't find any information on how to do.

  Running Mac Os 10.6.8 Firefox 14.0.1

  Most would appreciate the help in the restoration of this function.

  Thank you

  bmahin

  You can download Firefox for internet, which I suppose is that you had a specific extension, you used download o (you can always use default downloader in Firefox). If you type "subject: addons" in your address bar and press ENTER, and then click Extensions, can't you see not all disabled addons, or something that has to do with the download?