Similar Questions

• Slider & amp; Collision detection issue

  I couldn't find anything to help solve my problem thanks to my various research and turned to the publication. First - I am strictly a fan and try to create a timeline of the biography of a genealogy site that I am building.
  I have a scroll bar with a graph like the dredger pocket watch. What I hope to achieve, is that when the Watch has crept along the timeline and is is arrested on a marker (shown as a year), I'd like to pop up the relevant text on this date in time.
  
  My cursor is a movieclip and markers of the year are buttons. Through my research, it seems that I need to use both the collision detection and a certain type of load a script attached to it. It is quite possible that I am too far from my skill level, but I wanted to tender hand in case there may be help for me.
  
  I don't really have any code to show that I am very uncertain as to what would be the code appropriate to begin with. You can see an example of what I'm trying to accomplish here-> my scroll bar
  
  I currently have the text attached to the "over" frame in the button for example.
  
  Thank you in advance,
  Randy

  Hello

  A quick solution to a situation that involves no collison detection must follow the x position of your clock instead, Minesweeper movieclip. You can use collision detection if you want, but by the way you set up your movie, it will involve a lot of targeting and recovery of the property. This track requires that you only add a few lines to a code you already have.

  Follow these steps

  (1) from the main stage, double-click your mc with the clock and the line in. Create a new layer and put 2 on that dynamic text boxes. Give the first instance of 'xpos' name text box and the other an instance name of "marker". XPos position near the bottom right of the scene and the marker on the opposite side. We will use these boxes for testing.

  2) click on the Actions layer and look for the line that says:

  ratio = Math.round (this._x);

  This guy below

  XPos.Text = report;

  Test your movie and you should see your x on the lower post update when you drag the clock. By working? Well, that's what we want.

  (3) according to the type of line last in what follows

  space var = 3;

  If (ratio > 36 - space & ratio)<>
  Marker.Text = "1900";
  } else
  If (ratio > 172 - space & ratio)<>
  Marker.Text = "1915";
  } else
  If (ratio > 399 - space & ratio)<>
  Marker.Text = "1945";
  }

  OK - explanation - what is happening here is to check if the clock is on one of the markers and we send the right text to the other created textbox marker information previously. If you test your animation and drag toward the center of the 1900 marker you will see its position x is about 36. The space variable adds or subtracts 3 on this position so that we have a good size "struck the area. In other words, if the x position is between 33 and 39 while we are on the marker of 1900. 1915 marker is the same with the other two - between 169 and 175, between 396 and 402 is marker of 1945.

  You can now replace the marker.text = "1900" line with what you want. You can make the box marker text a movieclip and it melted or slide in with the information you want.

  If it helps, then remember to delete the xpos off stage text box and delete the line of script that uses it. It was just to test.

  Here's the complete code

• Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

  Why an I get the test page yellow and black with each print job? I have a HP PSC 1350

  Hi - I assume that the page that you see printed is the alignment page.  This happens usually if the alignment process has not been made.  All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press.  Who must complete the alignment process and eliminate the page printing every time.  If you have problems, try following the procedure described in this document.

  Hope that helps.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Hello. Recently, I buy the suite adobe for students. I also paid for two months. But in my profile it says I have a free plan for testing applications. And I can't get the entire application. How can I solve this?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a "file not found messages

  I downloaded and used a test of Lightroom, several days ago.  I've used and have a library, but now, when I try to use it today, my pictures seem to be there in the library but when I try to start working on a new picture, I get a ' file not found message.»  How can I go back in my files?

  There are a number of options available when you choose to import files to your catalog in Lightroom (library)

  1 copy / copy as DNG, this option allows you to copy files of origin from their existing location, for example a folder on an existing, promenade, internal, external, a reader of card or a camera SD card connected to the computer via a USB port, to a location of your choice, in a folder of a HARD internal, external HARD disk drive or a network drive on your choice.

  2. move. This option allows you to move files of origin of their location, for example a folder on an existing drive, internal or external to a new location of your choice, in a folder of a drive HARD internal, external HARD disk or a network drive on your choice. (the Move option you cannot move files from a card or your camera.)

  3. ADD., this option allows you to add image files to the catalog of their location, for example a folder on an existing drive, internal, external or network drive and the original images remain in their current location.

  The original image file will be located at the location of your choice.

  There are no image files in your catalog (or library) file the original files are in the location you choose.

  If you choose to add files to your catalog from an external drive, then unplug the player from your computer, then Lightroom which will show the 'file not found '.

• will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

  Will never be an update where you can erase a background object of an image without clear photo behind the object and have the result as if the object was not always on the picture in the first place.

  I guess this feature without doubt not will be part of Lightroom because of the non-destructive nature publishing. Is that programs like Photoshop are for. But I don't speak for Adobe, because I do not work for them, and I did not all understand what are their plans for the future.

• I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  I have a Canon Eos 6 d camera and Lightroom 5 and my Lightroom 5 could not detect and open a RAW file in my computer, please help me solve this problem

  Hi soewandichan,

  Please make sure that Lightroom is far, i.e. Lightroom 5.7.1.

  Also, please copy the images from the card, and then paste them into a folder on the desktop and then try and import them into Lightroom.

  Kind regards

  Tanuj

• Basic tutorial shows a logo in the image of the lighthouse can be easily, folder + place. I don't have 'Place' in my drop-down list. I have 'Embeded Place' and 'bound place '. What I am doing wrong?

  Basic tutorial shows a logo in the image of the lighthouse can be easily, folder + place. I don't have 'Place' in my drop-down list. I have 'Embeded Place' and 'bound place '. What I am doing wrong?

  You do not have something wrong. January 2014 Photoshop CC update has added the ability to incorporate link GOLD Smart Objects. Before this update Photoshop CC, smart objects are always embedded in the Photoshop document. Although he made the biggest file size, it was as a backup plan because all placed files have been included in the document. Now you have the ability to embed or link the smart object. Link refers to the file instead of actually copying in your current file. Regarding your little tutorial, choose Embed.

• In ActionScript 2 simple Collision detection?

  I'm doing a simple maze game, but the collision detection doesn't work. I have the player moving with the arrow keys, and I'm doing so that when the player collides with the wall, it goes to a certain range. I have this code in the wall clip:

  onClipEvent (enterFrame) {}

  If (_root.player.hitTest (this))

  {

  gotoAndStop ("death");

  }

  }

  Name of the instance of the player's 'player' and the wall instance name is "walls1". When the player hits the wall, the player goes right through it. I'm sure it's something with the collision, not the 'gotoAndStop ("death")"; because I've tested it with "gotoAndStop (5);" and the player is still through the wall.

  If someone could help me, I would really appreciate it. Thanks in advance!

  What object expect you goto frame 5 ("death")?

  You should move your code to the main timeline and target objects.

• Management change of HPSMH Collision detection

  Hello world

  We want to just implement collision detection mechanism in the management of change HPSMH. That means that if a CR was raised with a service assigned within a specific date range (say from 2nd to 4th month) .then if any new CR is triggered with the same affected service in the same amount of time then it will show a validation that the services concerned has already been used in a few other CR in the same amount of time.

  Hello and welcome to the HP support community!

  You have posted this question in the section the Community Forum of HP Android tablets.

  According to me, that's not the right area for your question.

  Myself, I have absolutely no idea what you're talking about!   :/

  WyreNut

• I am trying to configure MÜDE for my organization using Oracle BI administrator and have some questions about its feasibility. Please help me.

  I'm looking for in the MUDE (multi development environment - user) for future developments of the RPD and I tested various scenarios and I came across a few questions:

  1. do you think that we can add new objects to an existing project without checking in?

  2. in case I missed a few items for development while creating a project, so how do I add them to the project?

  3. special security on objects - it can handle special security on objects (example fields assigned to hidden only)?

  4 should we we look at a timetable of the releases (only the new changes to RPD each 60 / 90 days?)

  I know that few issues may be vague, but any idea on those who could help me a lot.

  Thank you in advance!

  I don't want a double amount of answers. Because I have no response from the other group felt that it was in the wrong place or group sleeping and it took a double signal. Of course, I will be closed one of them when the answers start coming.

• Script detection and redirection Shocwave

  I'm looking for a good detection and redirection of shockwave script for a Web site.
  
  It is likely that a number of visitors to this site will be on computers account restricted (e.g. in schools), so they will not be able to automatically install shockwave if this isn't already on their computer.
  
  For those users I want to redirect to a page where they are informed that they need Shockwave and they should install it... or visit another page linking to a download version of the site.
  
  However, I am struggling to find something.
  
  I have Director MX2004 and scripts provided in the section "Publish" do not seem to work, and Googling shockwave detection brings up many pages on earthquakes, which, while interesting, are not, helping me progress.
  
  Does anyone know what it is?
  
  Thank you
  
  Patch

  Thanks for that. I had found this before, but it doesn't seem to work when I tried it.

  It seems that I have 11.0.3r470 drive installed on my computer, and this script was told that it was not the most current, even when I was checking for 10.1. However if change the value of tMinorVersion to 0, then it works.

  Looking at the script it seems to be a problem with the logic of the tests carried out. I made a few changes, and it seems to work.

  I enclose the modified code in case it helps someone else.

  Thanks for your help media Nano

  Patch

• having an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  I have an iphone 6.  The ringtone does not make a noise.   I tested the ringtone and it sounds however when I receive a call or text or email, the Bell is silent

  Hello Jimmy10 66,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to follow your alerts, and I want to help you get your work again.

  Before we get too far, it's always a good idea to check that your 'secret' button just above your volume controls is not engaged. If you see that the yellow indicator go ahead and switch to the other position to turn it off.

  Alternatively, you can drag up from the bottom of the screen and make sure that the control of "do not disturb" is disabled.

  If those who are for the time off, go ahead and restart your phone and retest alerts. If the behaviour continues or if you encounter any problems, please reach out again and let the community know what other steps you have tried. The entire community is here to help.

  Best regards

• I've updated my iPhone 6s version 9.3.4 and have no Service, how to return to the previous update?

  I've updated my iPhone 6s in the last (9.3.4) update and now have show no Service at the top. Yesterday, I had intermittent service and thought it was the carrier, but it's not.  I've been using Google Maps and it kept crashing and place would come no Service. Can someone help me to return to the previous update please?

  Before posting this question I've shot and turn it back on repeatedly, I followed all the steps that Apple has informed including turning airplane mode on/off, remove the SIM (my carrier replaced) and reset the network settings. I can't ring Apple for help and live about 3 hours in an Apple Store.  My phone was working perfectly before installing the update.

  You cannot revert to a previous version. Have you tried the latest suggestion here?

  If you cannot connect to a cellular network or cellular data - Apple Support

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.