Planned SMART failure hard disk 6: ST9320325AS

Any help to solve this problem.  I can't open the windows.

Hello

"I can't open the windows.

You say not far along in the preocess loading as it gets.

In all likelihood, the hard drive failed:

http://en.wikipedia.org/wiki/S.M.A.R.T.

See you soon.

Tags: Windows

Similar Questions

  • Satellite L30 - 10V - smart failure hard disk

    My laptop s son frozen then it happened and THE new, and as he loaded up Vista again said that there was a mistake and restarted itself and continued in this loop until I put in the disc of resettlement (GMR400705EN0) provided with the laptop and resisted F12 at startup.

    Everything seemed well forward. He explained he would be completely erase all data on the disk hard drive then I'm gone come with it until it crashed at 12% and said hit any key to continue when I did all this I had was a blank screen Toshiba. I did it again and this time he got up to 60% then it is the same thing as now when I turn on the laptop it say "planned smart failure hard disk 4 Toshiba MK8037GSX-(S1) WARNING: immediately back up your data and replace your hard drive, a failure may be imminent press F1 to continue."

    So do you have any ideas as to what the problem is and will be I need to replace his drive hard as the laptop is a little over a year old and has not been used much?

    Help me please anyone!

    Hello

    I'm sorry to say, but I fear that your HARD drive will die soon. You must, as soon as possible, back up all important data and get the new HARD drive. The replacement is not so complicated and you can do it alone.

    If you need assistance please let us know. There are a lot of people on this forum with a lot of experience and. You're not alone ;)!

  • Satellite L550 - SMART failure HARD disk reports early - what to do?

    Toshiba Satellite L550-113

    At startup, I get a fault HARD drive reporting mini-message soon, and I am asked to by pressing F1 before will continue to Windows (Vista 32 bit).

    The message of the Toshiba HDD application alert is as follows:

    Disk0
    Your HARD drive is SMART failure to predict who monitors the HARD drive, operating status. Your HARD drive is facing a problem and CHIP controlling the software predicts that the HARD drive will fail. Toshiba strongly recommends that you create a backup for the data on your HARD drive. Contact an authorized service provider to check your drive and buy a new drive for replacement if necessary.

    I ordered a new HARD drive to replace the failed HDD (can't be bothered p * ssing all with the support of the RMA and tech).

    However, is it possible to repair the old HDD once it's been deleted? If I have the reformat, it would do anything, or is it more serious than that?

    Hello

    What should do? Back up all your data as soon as possible. You have created recovery DVD?
    If this is not the case, do. When you redeem your laptop HARD drive, you can use this recovery disc to install the operating system and have once again the factory settings.

    What is with guarantee s notebook? I mean that if the warranty is still valid, you can request service Toshiba to replace HARD drive.

  • SMART FAILURE SCHEDULED DISK HARD 0

    Hello

    I USE DELL STUDIO 15 AND I HAD THIS PROBLEM, WHENEVER I RESTART MY SYSTEM IN THE LAST FEW DAYS...

    SMART FAILURE SCHEDULED DISK HARD 0: ST9500420ASG-(S1)

    HOW SHOULD I DEAL WITH IT...

    Remove the disc, ride in a 2.5 external hard drive enclosure "and attach it to a system that works by USB.  You may still be able to read all or part of your data.  If you can't, you must then decide if the professional data recovery worth the cost - it can work in a few thousand dollars, however.

    When you replace the disk, make sure you buy an external hard drive backup so that you are not faced with this situation potentially very painful in the future.

  • Get a "Smart failure predicted disk hard om 0: Tosiba mk6021gas-(pm) external hard drive, how can I save everything?

    The full error message is: Smart failure predicted on hard disk 0: Toshiba MK6021gas-(pm) WARNING: immediately back up your data and replace your hard drive. A failure may be imminent.  Bought an external hard drive, but cannot locate the instructions on how to do it. Help please.

    Hello

    Plug your external hard drive and let it be recognized.

    To save the data:

    Click Start > My Documents > click Edit at the top (file, edit, viiew, etc.) > select all > in the right pane, all your data (photos, music, files, etc.) need to be highlighted > right click anywhere in the box put folders > crushed cursor send to > click on the external drive letter in the list > they should all then copied on this disc (this may take a while).

    See you soon.

  • Satellite C660 - Diagnosis indicates a failure hard disk

    Run the diagnostics on my two day old - Satellite C660 shows a failure on the hard drive. Check disk hard Windows ran without failure.

    Can I assume that it is a false indication by diagnosis of Toshiba? The thread on this topic is not conclusive on this issue.

    Thank you Fred

    Hi frredi,

    Diagnostic tool what you mean? It's the Toshiba Diagnostics tool that shows an error on the HARD disk?

    If Yes, you must contact the seller of the laptop and ask for replacement laptop. Bad HARD drive sector you can still get but he s not recommendable to save important data in this regard.

    So just give shop and take a new one. :)

  • Smart failure hard drive GLHKHH-6AO74G-XD7X1G-6OEWO3 id

    help required about this error

    There may be several reasons. Abnormal termination, impact on the computer portable hard drive is running, or just a device failure fragile very complex. Here is the Service Manual:

    Manual

    Instructions to begin on page 38. You have an external DVD drive for reinstalling the software? Your laptop lacks an optical drive, right?

    You have a 500 GB 5400 RPM hard drive and a cache drive 32 gig mSATA acceleration.

    Your hard drive should be an ultrathin model of 7mm. It is a good:

    http://www.Newegg.com/product/product.aspx?item=N82E16822178252

    Post back if you need help for the migration of software. If the old drive will always start Windows, it is still possible, it could just be copied (cloned) to the new drive.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • G6-2262sa Pavilion: Pavilion g6 failure hard disk

    Hello, I hope someone out there can help you.

    I'm trying to fix a laptop Pavilliong6-2262sa for a friend who would not start at all.

    I tried to use a system restore CD, but it did not work.

    Initially I treid to perform a check of the hard drive, it would get to 99% and stops.

    Now when I try to do a hard drive check, he says:

    INTELLIGENT control: NOT INSTALLED

    DST short: NOT INSTALLED.

    IAM guess at this stage that the hard drive is fried. I can always get a new one that is is not question but how you go all re - install Windows 8 without go out and buy a copy because it is already installed on the machine.

    Hope you can advise thew best plan of action.

    @Sparky74,

    Hello and thanks for posting back.  The product key is in the BIOS and is picked up during installation.

    Thanks again and have a great day.

  • Satellite Pro A200 (PSAE4E) failure hard disk

    Hello

    My computer is Satellite Pro A200 (PSAE4E) purchased Oct 2007, running Vista 32 bit. He was always a bit skittish and prone to crashing. The first time I ever did a Windows Update it projected blue, so I restored and never updated since.

    The other day it started to emit beeps during startup, and while I could then get into, I think that the hard drive has failed, because now it runs very slow and crashes.

    Think the forum that this laptop could never be made to be stable and reliable?

    The hard drive is hard to change? I do it myself.

    There the drive hard replacement somewhere online instructions?

    Should what model of hard drive I install?

    Thank you

    RAID

    Hello

    Replacing the HARD drive is not difficult.
    HARD drive Bay must be placed at the bottom of the unit.
    You should see the drive Bay HARD fixed with a screw cover.
    Remove the screws and you will see the HARD drive

    To remove the HARD drive, remove the connectors

    But note; Be always careful and don't use force!

  • Smart failure predicted hard disk.

    When I go to start my computer, I get a black screen with the type of password. After that, I get a smart failure hard disk. then he said: press F1 to continue. After that the regular WindowsXP screen gos sign in screen. could someone help me with this problem

    Your hard drive is dying. Back up your data to external media such as a USB flash or external hard drive player IMMEDIATELY. Then replace the hard drive, install Windows on the new drive. MS - MVP - Elephant Boy computers - don't panic!

  • Failure SMART hard disk with Satellite M30X

    A problem with my hard drive has suddenly popped up. Whenever I try to start the computer, the following message appears:
    SMART failure provided on hard disk 0: toshiba mk6025GAS-(PM) WARNING: immediately back up your data and replace your hard drive. A failure may be imminent, press f1 to continue...

    When I press f1 it just shows the window of windows xp with a black background and stays like that.

    So, today, that I inserted dvd products recovery, which took about 3 hours to restart. Once this is done, I could go to the windows menu start and tried checking errors c drive of my computer. To be able to do that I had to reboot the computer.

    When the computer has restarted the same error message above SMART failure predicted etc. had sprung up again. After pressing f1 computer started chkdsk. When he reached 4/5 which was chkdsk varifying data file he said a cluster of file message replaced 5518 name pagerfile/sys and just froze.

    I manually restarted the computer and when I went at the start menu windows an other error message pops up saying: windows could not save the data for the file c:\ data has been lost. This error may be due to your computer hardware or network connection. Please try to save this file elsewhere.

    Finally I tried to restart the computer once more and a blue screen dark this time appeared saying something in the sense of: it has detected a problem with your hard drive and it may have been caused in what concerns some hardware and something in the message was referring to the BIOS.

    I buy a new battery for laptop a couple of weeks, but it worked perfectly. So someone could shed light on, you can the problem. At the time the laptop is freezing on the black windows xp screen.

    Thank you

    For me, it looks like a HARD drive failure.

    The S.M.A.R.T (self-monitoring, Analysis and Reporting Technology) is an industry standard that is used in hard drives. This feature watches and monitors the important parameters of the HARD disk and allows you to recognize the HARD drive problems.

    In my opinion the HDD doesn't work properly and you must replace it as far as possible.

    Sorry for this bad news but I think that there is no other solution as a replacement of HARD drive

    Bye and greetings

  • SMART FAILURE PREDICTED ON DISK HARD 0: WDC WD2500BEVT-08A23T1-(PM)

    Hello

    I use the Lenovo Thinkpad SL510 with windows 7 ultimate 32 bit authentic. All of sudden my laptop displays the following error during startup:

    SMART FAILURE PREDICTED ON DISK HARD 0: WDC WD2500BEVT-08A23T1-(PM)

    WARNING: Immediately back up your data and replace your hard drive. A failure may be imminent.

    Press F1 to continue.

    I tried to press F1 so many times, but it is not booting. I did tests of difficult diagnosis and he showed the result as "PASS for read & speed test '.

    Please help solve this problem as soon as possible.

    Hey, @sumukhreddy!

    I'm really sorry to hear about your WD drive problems. However, I recommend you to use Data LifeGuard Diagnostics from WD (DOS version) to test again and check on the health and the SMART State it. The DOS version of the utility will allow you to perform diagnostics without having to boot into any operating system. You should be able to find under downloads by product once you select WD Caviar Blue.  You can extend the WD software link and follow the instructions.

    The drive is OEM and most likely came with your laptop, so I recommend you to contact the manufacturer and check the warranty of your laptop. It is always covered, you can RMA and they should be able to provide a repair and the implementation of the defective material.

    Good luck! I hope I've been helpful! :)
    SuperSoph_WD

  • Failure of SMART hard disk - no recovery disk

    Hello. My laptop model Vaio VPCF126FM tells me that the hard drive has a failure (mini-message). In fact, the machine boots and I can connect to Windows, but once I try to do something with the fact that it freezes the HDD led on fixed. I have all my data backed up, but... I never created the recovery disks. I'm sure that this machine is out of warranty. So, what are my options? Buy a new HDD of, say, Amazon? And more important still, what OS? Thanks in advance for your help. Best regards.

    I had a similar problem with a SATA drive in my Vaio. It happened to be a Western Digital (WD) 500G drive. I was able to 'fix' with DLGDIAG WD's package with a full scan. You may be able to do the same thing. If the player starts to really not, he can fix that temporarily, or it may not work at all with the repair.

    You should always have the hard disk recovery partition, but I don't know how to use it if you replace the disk. You might be able to use an external enclosure for the drive sying and find a way to boot from the recovery partition to build on a new internal drive. Better would be to get your system of sufficient work to create recovery discs, which is what I was able to do. But for now, my reparied drive seems to work OK.

    Good luck!

  • SMART failure provided on hard disk 2: WDC WD 3200AAJS-55RY-AO (S1) __WARNING: IMMEDIATELY back up your data and replace your hard disk drive failure can be immenent

    Please help... I dunno what to do one day, I came home from work and my new about sony vaio desktop has been frozen, so I rebooted and now I have this message when I try to start and I do not have a vista disc or a recovery disc and am worried my lost data as I do not know how to save at this point because I can't even in the windows operating system Vista.  can someone help me please?

    We must believe the error message telling you that your hard drive is about to fail. If you are not technically proficient, take the machine to a local computer technician who will try to back up your data and then replace the hard drive. Do not use a type of BigComputerStore/GeekSquad of the place. Otherwise, you may be able to get the data saved by one of the methods below and replace the hard drive yourself.

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

    * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

    http://www.Knoppix.NET

    IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company. I use savers by car, but there are others. General prices run from $500USD on-site. Investors recovered all disk data on a portable player that failed for one of my clients, and it cost $2 700. He thought that it was worth the money; only you know what's worth your data. I understand that some insurance companies now cover fresh data recovery so check with yours.

    Drive savers - http://www.drivesavers.com

    For future disaster recovery programs:
    http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - don't panic!

  • G71-340US Notebook: hard disk failure

    Had a test of memory, smart disk passed, test drive does not register any completion %, after 5 minutes I get hard drive test failed - disk 1 (303) fast, hard disk complete 1 (305). Error log lists 0601 & 0303. Any ideas other than the new hard drive?

    Hello

    NOP, it looks like a proper failure and you need to get a new HARD drive

Maybe you are looking for

  • Firefox keeps do not answer

    Whenever I try to load most of the Web sites (such as Google mail or YouTube) Firefox stops responding for several minutes and then fails to properly load the page, I tried to reinstall, using a new profile and various other fixes and none of them wo

  • M30 how installs-Hotkey utilities for display devices

    Hello How to install this driver I downloaded Thank you I want to be able to fn + f5 to swap the display devices

  • Overheating on Equium A60-155

    Hi all I've owned an equium a60-155 for almost a year now, it has been discovered, but recently it began to close, which I suppose is overheating. the vents are clear and unblocked, although the area around the Equium logo (top right of the base unit

  • I want to know that the total number allowed per process and overall user objects?

    In my system, I have windows xp sp3 installed. my system by the number of user process object is 10000. When the total user of my system object reaches 10000, I'll be able to do whatever it is like opening a new tab in iexplorer. so, I just want to b

  • Error at startup, msvcr70dll is not found

    When I start my computer, I get a message msvcr70dll not found, please re - install program. I don't know what it is.