Planner punctual work broken after completion

Similar Questions

• Question: How to make data Disqualification Purge project after completing a work?

  Hi all

  I know how manually purge the data of the project by clicking on

  but I wonder if there is a way to Purge project data of the Disqualification after completing a work in itself.

  Thanks in advance for any response.

  Note that Disqualification 11 g, just released, includes the ability to create policy rules for the purge of the data where the jobs are executed with labels of execution.

  This does not include the data produced during the execution of the works interactively to the Director (i.e. development and test jobs).

• Cancellation of WIP job after completing the work

  Hello everyone,
  
  There is a question of "Annulant the WIP job after completing the work.
  
  Please let me know how to solve this or workarounds.
  Give me the navigation please.
  
  
  Thank you

  Hi Adam;

  Please search your question in metalink as cancelling WIP Job there are 272 available docs. Please check. The best way to check your question in these docs

  Respect of
  HELIOS

• WRT54G V3.0 Web Interface broken after FW update

  I meet the same web interface problem after I updated the firmware, like in the case below, but with my v3.0 WRT54G. The firmware file I upgraded to was WRT54GV4.0_4.21.1_US_code.bin. Will provide you with instructions and decommissioning file name so that I can use the web interface again? I did the steps of resetting, tried a different PC, but get the same problem of web interface. Thanks in advance.

  WRT160nV2 Web Interface broken after FW update. Registration date: 21/05/2009

  Yoohoo!

  Now I know why you have this nickname. Thanks for your help. Problem solved. Web interface works again.

  Must have been the tftp download from the link you provided because I used the same firmware upgrade (WRT54GV4.0_4.21.1_US_code.bin) file I downloaded and tried to install previously.

• Plugins does not work in After Effects CC15.3

  Everything worked perfectly yesterday. A project of client using some of my favorite plugins like Trapcode Form and particular.

  After update today, would continue my project where I left.

  However, the majority of my plugins disappeared, leaving me unable to progress, short on time.

  I had to completely start over, with a new idea and the standard after effects plugins.

  I tried to reinstall them, but they may not appear.

  Did anyone facing this problem too?

  Can you please help.

  Like HippieBoy, but on Windows 10, I tried to copy the plugins trapcode manually from the

  "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Plug-ins\Trapcode.

  TO

  "C:\Program Files\Adobe\Adobe after effects CC 2015.3\Support Files\Plug-ins\Trapcode."

  and my trapcode plugins where backward. The amazing thing is that I have installed the Plugin Trapcode after having updated to 2015.3 CC. The reason was probably that the Trapcode plugins trial version installed to AE CC 2015 and that the folder was still here the licensed version of Trapcode installed in the old folder.

  Re: Plugins does not work in After Effects CC15.3

  Hope this will help

• Captivate 5.5 - event video freezes after completion

  Hi all

  I am trying to create e-Learning courses.

  I want to have a video in a slide. Here are my requirements:

  (1) video should be a video of the event.

  (2) I need to control the video of the event with the controls of the player project is to say there should not be two player controls

  (3) at the end of the video, the course should go to the next slide

  Note: I can't insert video slide corresponding to the duration of the slide. The goal is to use the video of an event like video slide corresponding to the duration of the slide.

  Test 1: I've selected calendar as "precise moment" and enter the value equivalent to the duration of the video. Also check the 'synchronize with the project.

  Issue here is that, whenever it is buffering, time differences and the progression to the next slide slide, before even the video ends

  Test 2: I selected the date in the form "video time" and checked the 'synchronize with the project.

  Issue here is that the project is frozen after the end of the video and does not progress to the next slide. Even the manual control of 'Fast forward' or 'Play' will not work.

  Tried to change the blade that is identical to the duration of video duration timing less than video and more video. There is no use.

  I understand that it's complicated. Any idea or suggestion to remedy this problem?

  Thank you and best regards,

  Bruno Arunjunai

  Hi all

  I couldn't find the reason why even the video hangs after completion while setting the date in the form "duration of the video.

  However, I found the means to my needs.

  I added the video of the event. Hourly, has selected rest of slide and disabled the "slippage to break until the end of the video" checked synchronize with the project.

  From now on, there is no problem.

  Thank you best regards &,.

  Bruno Arunjunai

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• My new orkut page doesn't work anymore after uptading firefox Firefox v9.0.1 at 10

  My new orkut page not working anymore after I in v2.1 this morning my browser firefox Firefox v9.0.1 at 10. I'm looking for this version mozilla Firefox v9.0.1?

  You can get it here:
  FTP://FTP.Mozilla.org/pub/Firefox/releases/9.0.1/

  The problem is Orkut incorrectly detects FF10, there is a bug filed here:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=720179

• Satellite P850 almost nothing works correctly after Windows update 8.1.

  Model: Toshiba Satellite P 850 part number: PSPKFV-00H002AR

  Machine is purchased in UAE (United Arab Emirates) UNITED with Windows 8 installed at the factory. Doesn't have a 3d screen. Doesn't have the capacity of Blu ray.

  I have the following problems: most of the stuff does not work properly after that I updated to Windows 8.1 Although I followed the manual of Toshiba.

  Some of the function Fn keys do not work.

  Eco button does not work (even if it does not work in Windows 8 also)

  Accelerator drive HARD does not work. says "caching works correctly", but when I go into the history of the use it has not been used since the day wherever I've updated to 8.1 Windows

  There is NO driver for the built in LAN card (manufacturer Realtek)

  The following solution is possible: uninstall all the drivers/utilities Toshiba and registry clean (with backup of course)

  Go to download Toshiba Driver and select the 64-bit Windows 8 operating system (I guess that's for computers with pre installed Win 8.1 at the factory?)

  Download any supplied drivers and see if everything works.

  (I always download my drivers on Toshiba EU website (no question of machine is bought from UNITED Arab Emirates) because I don't see any difference in the files and Toshiba MEA Middle East and Asia Web site is slow and does not work most of the time.)

  Also is there a manual with good order with installing the drivers? I guess that's something like Chipset driver > driver for Toshiba system > Toshiba flash cards Manager > then all the Toshiba Utilities > drivers for LAN, WLAN, sound, video, fingerprint reader?

  And one last question made Office Toshiba assist include the last HARD disk Accelerator utility? If not, where can I download the latest version of work for my model/brand computer laptop that works with Windows 8.1?

  null

  > Some of the function Fn keys do not work.

  To get all the keys FN works, installation of all Windows 8.1 tools is very important.
  Tools such as: * System Toshiba Toshiba function key utility, utility Support Flash Cards, driver *.
  You must look for each driver in the Windows 8.1 update 8.1 Windows 64 bit box

  > Eco button does not work (even if it does not work in Windows 8 also)
  You need to update/install the Eco Utility for Windows 8.1 update

  > Drive HARD Accelerator is not work says of "caching works correctly", but when I go into the history of the use it has not been used since the day where I've updated to 8.1 Windows

  Have you installed the utilities of the accelerometer and HDD Protection Utility for Windows 8.1 64bits?
  Where n t, the mentioned tools are located in the area of 64-bit Windows 8.1

  > There is NO driver for the built in LAN card (manufacturer Realtek)
  It's the same local network as for Windows 8

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Satellite Pro 6100 keyboard does not work properly after repairs

  Hello

  My 6100 Pro Sam just being away from usual mother board and power Board replacement with Toshiba, but now I have a strange keyboard problem.

  When I turn it on, all the keys are working. After a few minutes, '3' is not working, then 'r' fails, then '5', ' 7 ', ' 8',' 9 ', ' 0' to stop working. At this point, I can feel something very hot under the middle of the keyboard. A reboot and no keys work. Another reboot with the internal keyboard and an external keyboard to the PS2 is still defective (some keys work, others do not), but the outer one works properly.

  Now, if the pc has not obtained if hot as the middle of the internal keyboard, then, I would conclude that the keyboard was defective, but for his failure, slowly and sequentially like this and it fails at the same way every day (since Toshiba rebuild it!).

  Perhaps, internal keyboard controller overheating?
  Anyone know what this could be? :-(

  See you soon,.
  Homer

  Right under the keyboard of your pro 6100 is the VGA graphics controller (the keyboard cable plugs on the same map). It is normal that this part become hot during use.

  It is strange that your problem appears after a while and not immediately.

  It could be just a bad relocation of the keyboard cable (it's a thin layer as a movie negative photo) which easily appears there, but... it may be something more serious, too. (Especially since you had done upgrade where the material had to be changed)

  I consult the service centre once more and ask for instructions how to deal with this. Do not ignore it (using an external keyboard instead of internal dysfunction) because he could end up in something more serious soon...

  Concerning

  chain

  P.S. Please keep us updated on your efforts

• How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?

  How to get you to your rear camera works again after upgrading 8.3 on an iPhone 5?

  Is 8.3 typo?

  After which update exactly?

• 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

  Internal to the device doesn't work anymore after upgrading WINDOWS 10.

  All the drivers are up to date.

  I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

  Also, I don't know what I can do.

  If someone can help me...?

  Thank you.

  The problem is resolved.

  Not in the way I wanted to (using the internal camera), but I bought an external camera.

  It works without any problem.

  So for me the problem is resolved.

  Thank you for given applications.

• __Chess titans: change to keep the part saved after completion?

  Hello

  I did a search and finally understood what happened.  In Vista Chess Titans kept the same saved game even after completing the game.  I find wire-to-wire on the ' net to complain about this.

  Now, it seems that W7 Chess Titans erases the game after completion.  I understand why people want to do this.

  However, I would like to put a game so I can play differently to a conclusion.  Is it possible to change a value somewhere that keeps Chess Titans in W7 to delete a saved game once he is competing?

  Thanks in advance.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  If you want to save a game after finishing, you can visit the link below.

  http://Windows.Microsoft.com/en-us/Windows7/Chess-Titans-how-to-play

  Note the saved games in Windows 7 are stored in the path below.

  C:\Users\User\saved games

  You must save the file to a removable device, and you can insert this backup file next time if you want to play the game.

  If you find difficulties to perform the steps you can post back.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Printer works only after the reboot or shutdown

  I use win xp sp3 computer. My only works only after the restart or shutdown. If I reinstall the printer driver, then it will work. I have reinstall win xp but similer happen again. I scanned my system with kaspersky. But no change. I need a permanent solution. Please help me...

  Hi Pierre,.

  1. what exactly happens when you try to use the printer?

  2. you receive messages or error codes?

  3. What is the brand and model of your printer?

  Method 1:

  You can try to start the fixit printer and check if it helps:

  Diagnose and automatically fix problems printing and printer

  Also see the article and check:

  Resources for the resolution of the printer in Windows XP problems

  Method 2:

  You can check the event viewer to learn more about the problem.

  Procedure to view and manage event logs in Event Viewer in Windows XP