Satellite P850 almost nothing works correctly after Windows update 8.1.

Similar Questions

• sound card does not work correctly after Windows update

  My sound card has been disabled when I install an automatic update for windows. There was an extra audio driver in Device Manager 'bluetooth AV audio' and audio peripheral anoither like this. After installation there is no sound coming out if my sound card was on the list of Device Manager. I followed several steps through windows help and support to solve the problem since seeing him on my laptop for mute also did not work. After you resolve the problem with the use of MICROSOFT FIX IT, it was fixed but this isn't the same quality that I get. Its volume is less eventhough volume: 100. The sound card that was originally installed on my laptop is "Conexant High definition SmartAudio HD2. Is there something more I need to do in order for me to get the same quality of sounds I have before installation?

  Moreover, the light of my keyboard for caps lock shift and scrolling also failed after installation. I reformat my laptop after the incident, so I can get a good in the new system, but it does not solve the problem.

  I also need to update my sound card for my HP laptop? Please help me.

  Thank you!

  Hello

  1. what windows update that you install?

  I would ask you to try using a different set of drivers to verify. For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Conexant support:
  http://www.Conexant.com/support/

  I hope this helps.

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Failed to open the Works document after Windows Update

  Original title: failed to open the works document, after a month of update.__9 of configuration of microsoft of 350 pages. Help!

  no change...

  Hi SILLIVEN,.

  1. what exactly happens when you open the works document?
  2. do you get an error message?

  Try these steps and check the result.
  Step 1: Update remove recently installed
  a. see remove an update
  b. Once you have removed the update, restart the computer.
  c. open work document and check if the problem persists.

  Step 2: If the problem does not persist after the removal of the update, try to install updates on hold by turning off all non-Microsoft programs and check the result. To do this, try the following steps:
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. install the updates. See the updates Windows Installer
  d. Once you have installed the updates, the article, follow "step 7: reset the computer to start as usual.
  e. check if the problem persists.

  For further assistance on Microsoft Works, please post your request here: http://www.microsoft.com/products/works/support.mspx

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Spectrum 13 Pro laptop HP: Audio doesn't work correctly after Windows upgrade 10

  I've updated my PC HP spectrum Pro 13 laptop with Windows 10, after her international (idt high definition audio codec) Audio is not working properly.

  It works with some sound of PCs and with a highres movie played with VLC but my main application of the company "Skype for Business" claims that the speaker not working and when testing with Deezer there is a horrible squeeking sound instead of beautiful music.

  Even if I try a headset (Jabra) external USB S4B claims the "speaker not working', but it starts to work when I disable (idt high definition audio codec).

  What should do?

  Fixed it my self.

  Sollution, I uninstalled the IDT HD audio driver and reinstalled (same version, I had all along), then I also changed the samplingrate of quality studio I saw in another article

  Problem solved

• Several devices no longer work correctly after Windows 7 upgrade

  Hello

  Upgraded from vista ultimate to windows 7 problems with my eject button and other buttons on my laptop. They no longer work. Storage of mass and those problems?

  Please help me to get my laptop working again as I am not able to use my recovery disks that the laptop does not recognize the disc 2 so I'm stuck with Windows 7. The buttons on the phone IE, eject, s1, s2 and volume do not work and I have a mass storage controller problem it says no driver?. I tried and tried to find one, but I can't. I asked Sony for the replacement of the recovery disks and they want forty quid and I argued its their fault the disks didn't copy correctly in the first place so they should give them for free, but they do not really give a xxxx.  I'm not very high on the ins and outs of computers so if you are kind enough to help me please keep in terms simple lol. Many thanks in advance Jeanette

  Go to the website of the manufacturer of your laptop > drivers and downloads Section > key in your model number > looking for the latest Windows 7 drivers > download/install the.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless mouse and keyboard do not function correctly after Windows Update.

  Original title: question of another wireless keyboard and mouse.

  Is the keyboard model 1. 0 comfort wireless 1045, the optical receiver 3.0 has & optical mouse taken 2.0 supported by Windows 7? They are used to work with XP & my Vista Ultimate Home. In fact, they have worked with Windows 7 for a while. I think that an update (I have no idea of who or what) caused the keyboard to stop functioning. Yes, they are old, but I do not keep up with the Jones, I use what works, until someone thinks that we need another dose of fallout and disables it for me. I'm angry again.

  [Moved from comments]

  Hello

  It seems that you have a problem with performnace of the mouse and wireless keyboard.

  I suggest you consult the following links, which have enough information to solve issues of the mouse and the wireless keyboard.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard.

  http://support.Microsoft.com/kb/838398

  Troubleshoot wired keyboards that do not or only the erroneous characters category.

  http://support.Microsoft.com/kb/258826

  I hope this helps!

• Satellite P70 - Has: USB HDD disconnects after Windows update 8.1

  Installed the windows 8.1 update last night, since my USB expansion which I use for backups of files story guard disassembly and reassembly.

  Have tried to uninstall the 3 USB drivers but they just reinstalled Microsoft even those - I can't see specific Toshiba USB drivers to download.

  Please can someone help?
  Thank you
  Sharon

  The USB 3.0 controller is Intel. But the USB 3.0 Intel driver was available only for Win 7. Since win 8 internal Microsoft USB 3.0 driver is used for all computers/laptops in the world.

  I have your case I would test different USB ports as part of different USB devices to check exactly if all devices and ports are affected.
  Probably there s no USB port number
  Perhaps the problem of compatibility between the new 8.1 Win and external device?

• Windows XP PC freezes after Windows Update November 11. 2009.

  Our two identical Dell Vostro 410 PCs with installed WindowsXP SP3 image no longer work correctly after Windows Installer update yesterday (Wednesday 11. November. They will work in Mode without failure. However, mode normal, we get after the opening screen session and during the major part of the process is started, then the hourglass stays on for a time abnormally long. If we let the PC in this State for 5-10 minutes ago all of a sudden a beep and the computer freezes. A soft reboot is impossible at this stage, therefore, turn off the machine. No idea what could be the cause this problem and how to fix it?

  Initial reports indicate that it affects Windows XP systems with an ATI Radeon HD 2400 card.

  Solution: uninstall the update after the start in safe mode, driver ATI upgrade to the latest version (9.1, published on 22/10/2009), and then reapply MS09-065/969947

  Try it, report back.

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Outlook 2010 has stopped working after Windows updates

  November 11, 2015, my desktop, operating system Windows 7, installed about 28 updates to Windows. When I then put running the computer and open Microsoft Outlook 2010, Outlook closed almost immediately and this message appeared: "Microsoft Outlook has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. "(I don't check other office software).

  After the problem with Outlook 2010, I rebooted the computer several times and each time has experienced the same problem with Outlook 2010.

  I used system restore to restore the system to before the updates of Windows, which included a critical update. Outlook, then worked correctly. I changed the settings for Windows Update to "Never check updates" so that Outlook is not yet damaged.

  Was it something wrong with the Windows updates?

  The problem was solved when Microsoft released a revised version of the KB3097877 update. Maxwell Joseph, moderator of the Forum Microsoft, announced this in the post, he created at 23:22:03 on November 12, 2015, on the thread titled "update KB3097877 crash.

  He said ' Microsoft has released a revised update, so we suggest you go ahead and uninstall Windows updates KB3097877 > installed updates. Restart the system and run the updates check and reinstall it back. »

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• SilkRoad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  After I installed and opened a Silkroad Online on my Windows 7 64 bit, an error pops up: Silkroad Online Launcher has stopped working, and a close button the program. Any ideas on this subject? I tried to disable the firewall and antivirus software and restart the game, but it didn't work... I don't know what to do. The whole eror massage: Silkroad online Launcher has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available

  It is a file you need to edit in Notepad in the game directory. I would contact the manufacturer of the game as to what exact file. I have not personally done it, but I've seen this fix on other forums. MCP. MCDST. LVL 80

• bought a brand of DVD cards 2010, but keep getting the message that Hallmark Card Studio 2010 has stopped working a problem casued the program to stop working correctly. Windows will be

  I bought the Hallmark Card Studio 2010, I am operating Vista 64 bit the message I get is that Hallmark Card Studio 2010 has stopped working.  A problem casued the program to stop working correctly.  Windows will close and informs you if a solution is available.  I also downloaded the Windows 7 Upgrade Advisor and I get the same message with it.  It will not work.  All of the suggestions.  Thank you.  Carol M.

  Hello

  • Have you tried the suggestions of Imran M in other post?

  You can view these methods:

  Method 1:

  Temporarily disable UAC and check if the problem persists.

  1. open Control Panel.
  2. under the user account and family settings click on the "add user account / remove."
  3. click on one of the user accounts, for example, you can use the guest account.
  4. in the user account, click on the link "go to the main page of the user account.
  5. under "Make changes to your user account", click on the link "change security settings".
  6. in him "turn User Account Control (UAC) to make your computer more secure" click to deselect the "use User Account Control (UAC) to help protect your computer. Click the Ok button.
  7. you will be asked to restart your computer. Do when you're ready.

  Warning: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:
  I recommend the clean boot and try to run the program.

  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.