plant and replacement of motherboard settings
Hi, I replaced a bad motherboard on my Hp m8000n computer and then tried to take the computer back to the factory settings through the image of the d: drive. Everything was OK until they can get an error "code purple" and I couldn't go any further. The computer is shut down. Does anyone know of a fix for this? Thank you, Steve
Hello
You must call HP for this, but I gues so if you replaced the motherboard locally & not of HP, then the issue is not resolved, but you can install the release of the operating system of local store & recovery cd you at HP or you created from this computer will not work.
Tags: HP Desktops
Similar Questions
-
My computer has stopped working completely and I was going to upgrade in any case, I advanced the work.
Having replaced everything (motherboard, HARD drive) and everything worked as it should I turned my attention to my emails.
I tried the Transfer Wizard Windows 7, no joy. Tried to find the profile files, no joy. Just can't find anything about it either remote seems to be linked to tuberculosis.
HELP Please
Thank youProfile of Thunderbird folders are hidden files, so first make hidden files visible.
http://KB.mozillazine.org/Show_hidden_files_and_foldersThe location of the profile: http://kb.mozillazine.org/Profile_folder_-_Thunderbird
Even if your files are now in drive E, not C.Info on moving to a new pc: http://kb.mozillazine.org/Move_to_a_new_PC
If you have downloaded Thunderbird to new pc and run it for the first time, it will create a profile, but do not create the exisitng e-mail accounts. Then you copy the contents of the old drive hard e: drive - profile folder (not the folder real profile, that all the files in the profile folder) and paste them into the profile folder overwrite the default files.
-
Satellite P850-12Z: No. Wake up on LAN and no BT after replacing the motherboard
Hello
I got a Satellite P850-12Z Code: PSPKBE
Recently, the support of Toshiba replaced my motherboardI thought that WAKE ON LAN is disability, and my Bluetooth does not work.
I go to Toshiba Bluetooth programs and not workCan anyone help me?.
Thank youHello
> Recently the support from Toshiba has replaced my motherboard
In my opinion, you should get in touch with the guys from service again once who replaced / fixed on your laptop.
The laptop should work properly once the service has replaced a faulty part. If it s not the case, you guys should check once again!I put t know what card WLan do you currently use, but AFAIK the original build in WiFi card was Intel and this wireless network adapter supports BT as well.
So I think you should ask the guys once again unites what s wrong with you
-
Satellite A110: I need to replace the motherboard and the CD/DVD combo drive
I have a Satellite A1100, and my CD/DVD Combo needs to be replaced... also, I need to replace the motherboard by qualifying the connections that connect the CD/DVD drive is damaged. Is there any possible way for me to get the motherboard and the CD/DVD combo myself or should I consider a service repair center?
And if there is a way to get the spare parts of CD/DVD and a motherboard... can someone please tell me where I can get them from? If anyone has any idea how much it's going to put me back I would appreciate, they would let me know how it is... also, I would gladly help if someone can tell me what I can do about it.
Thank you
Hello
How old is your machine? If you still have your warranty, so why not give your machine to a local service partner?
So if you don t give something on your guarantee you can trade your coins. But to look for the pieces on google and you won´t get any help from toshiba (e.g. manual disassembly or something similar).
I tried long before your request and I made my experience that if you want to open your machine your completely on your own.
Welcome them
-
I built my computer 4 years ago, I just rebuilt by replacing the motherboard and processor and now after starting my PC that I am invited to buy a new product key, one I had when I bought windows is already associated with another installation, Yes this installation, it is always on the same hard drive just a new motherboard and processor
original title: why I have to buy a new product key1) click on the Start button
2) type: slui.exe 4 and press the Enter key
3) select your location from the menu drop-down and click on the next button
4) the next screen provides the number to call to Activate by phone
-
Recently, I replaced my motherboard, CPU and RAM in my computer. So I have to reformat and reinstall to get my computer running again, but I can't find my CD key for Win7 64 bit home premium. I do not buy from a retailer, but a friend who ended up by going to Linux. How can I get this key? I can't access my hard drive due to the change in components a keyfinder seems out of the question.
Recently, I replaced my motherboard, CPU and RAM in my computer. So I have to reformat and reinstall to get my computer running again, but I can't find my CD key for Win7 64 bit home premium. I do not buy from a retailer, but a friend who ended up by going to Linux. How can I get this key? I can't access my hard drive due to the change in components a keyfinder seems out of the question.
Much depends on what the 'it', is that you have bought from your friend. If it's a computer with a retail version of Windows 7 64-bit, collect any proof of purchase of your friend or you have to the Win 7 retail and contact the team of complementary pieces of Microsoft. If you have evidence convincing or compelling property of the product, they will provide installation media nd the corresponding key. There is a charge.
-
I have a Dell computer, with Windows 7 Home Premium 64-bit installed in the factory. There is a product code for windows on the sticker on the box. My problem is that the motherboard and CPU are released. I intend to replace and update the motherboard failed and cpu, ram, power supply, optical drive and eventually put in a larger hard drive. From what I read, I can not simply start the machine with the original hard drive, with windows already installed and activated. So if I wipe the hard drive (or put it in a new), can I clean install Windows 7 and then just use the product key on the sticker on the box to activate the new installation? Or what I need to buy a new copy of Windows 7?
I've also read on other threads, that you can "transfer" a license of Windows 7 on a different machine only if it is a "commercial" version, not OEM. If the version of Windows that is preinstalled on a Dell computer would be "retail" or "OEM"? And to reactivate the software on a rebuilt/updated machine up-to-date with the new motherboard, etc. would constitute a 'transfer to a new machine' or reactivation just on a computer upgraded?
The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:
-OEM versions don't offer any free direct support from Microsoft technical support Microsoft
-OEM Licenses are tied to the computer first you install and activate it on
-OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard
-OEM versions does not move directly from an older Windows operating system
What is OEM software? :
http://support.Microsoft.com/GP/oemsupport_1/en-GB
Licensing FAQ:
http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx
-
I have progaram after I replaced the motherboard on ipod classic 7th generation?
I need to reprogram after that I replace the motherboard on ipod genderation 7?
If hard drive iPod is not deleted and the previous content, does not. However, you can do a restore of the iPod using iTunes, to give him a fresh start. This erases the iPod, reinstall its software and sets it to the default settings.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
Have you ever done work (to replace logic card), or you're going to do? If you have not yet done the work, which is the real problem that needs to be replaced the iPod logic board?
-
Want to 800-060: reactivation after replacing the motherboard
I bought a HP Envy 800-060 with Windows 8 pre - install Amazon in July of 2013. It was an incredible computer since that time, and when the free update of Windows 8 for Windows 10, I did immediately released. Recently, however, the motherboard has failed on the computer. It would not stay same POSITION, and after much troubleshooting, I finally decided to replace the motherboard. Now that the computer is running again, I guess that the motherboard change was sufficient for the operating system to think that it is no longer enabled. I was never provided with a key of Activation of OS (Win8 has been pre-installed), and Microsoft has suggested that I contact HP to find the original key. I've looked everywhere on the chassis and inside the tower for a valid Windows activation key, nothing helps. I tried to find a phone number to call for support, but my product is outside the guarantee. I don't need advice or troubleshooting tips (so I don't pay the $59.99), all I need is my activation key valid Windows based on my serial number of the product. Anyone know the best way to achieve HP with this problem and have it is resolved?
Thanks in advance!
JC
The unfortunate, is that your original product key has been incorporated in the firmware original by HP motherboard UEFI when the PC was built. There is no way to recover this key now.
HP retains no record of keys to individualized product corresponding to individual computers, so they won't be able to provide you with the original key - and they are under no obligation to provide you with a SECOND key, that you didn't do the replacement of HP hardware.
With the product now being out of warranty, it's really call HP or not you upload support - and the experience I have had with older equipment-, they do that, there's just no way around IDs.
HP customer support is really the only way you have to get support. If they don't help you for free, because your PC is out of warranty, there is nothing we can do about it on this forum.
-
Replacing the motherboard on the Satellite L750 - 16 X
Hello
I am trying to replace the motherboard on a L750-16 X. I think that I need this A000080670 card, which is available. Under the RAM slots the sticker says A0000806709B141422W. I'm not sure of what the average figures and additional letters and I was wondering if anyone knew if it is compatible.
Thank you very much
Unfortunately, it is not easy to help you with this. As you probably know it's user forum for this kind of info is not easy to find.
I don't know where you want to get the new motherboard, but if you want to buy it by some authorized service they should now what they offer.I don't know if anyone here has the same machine and can help you with this. What you can try is to contact the nearest Toshiba service provider in your country and ask for help.
-
Can satellite M70-159 - I replace the motherboard with another?
Hello!
The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?Thank you.
I put t know if it s possible because I m not a technician for laptop.
Normally, you should only replace the motherboard with the same.I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.
-
a610n - fan error of the system after replacing the motherboard
Hi all
I just replaced the motherboard on my system (phone http://h30434.www3.hp.com/t5/Desktop-Hardware/M2N68-LA-Narra-2-Replacement/td-p/3711774) and now I get this error when starting: Fan failure system, PC service to avoid any damage. I thought it was the CPU fan but he was running and after some research, I realized that he could talk a case fan.
As a side note, the motherboard, I had was a little different and missing 2 connections that seem to be the front mic/headphone and USB ports.
Now, the case's fan then what really is the problem? Any ideas anyone?
Thank you
-Panos
The rev3.02 of M2N68 - THE Committee a case fan rear 3 poles. See here.
The CPU fan is a 4 pin cable and attaches to the appropriate header to 4 pins on the motherboard. See the representative schema above.
As for you, another question, the front USB port attaches to a USB connector on the card.
-
How to get and replace a key on the Satellite A100-522?
Hey, Toshiba.
I have a Toshiba Satellite A100-522 model No. PSAA2E-01C01EED and one of my shift keys
has broken below, so I can't use it (the small plastic bar to balance the key is broken
If the key "blockages". Can I send it for repair to the warranty, and Ive talked to the
seller, but I don't have the time to send it for repair (no laptop replacement in the meantime).Is it possible to get a new key and replace it myself? I know that some other laptop producers do the same thing,
rather than use a lot of time on repairs, if they are too simple.Concerning
John Reyes
Hello
Well, it's very easy to replace the keys.
Please check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20727&MessageID=76283But if the key is broken you will need to replace the entire keyboard.
To remove the keyboard, you have to remove the cover plastic thinking above the F keys.
Under this coverage, you will find 2 crews secure the keyboard
Remove the two screws and remove the cable from the flat keyboard which is connected to the motherboard. -
Replacing the motherboard on Satellite L350
My motherboard has failed and I am trying to find a replacement. However... I can't find my model ANYWHERE on the toshiba site. Please notify.
Satellite L350-01Y00PGE; Series # 39168435 Q; bar code I39168435QSSLD801Y00PGEB
Toshiba Europe GMBHThank you
Using of the unit details - http://aps2.toshiba-tro.de/unitdetails/ - page and your serial number, I discovered that you have Satellite L350-184 with PSLD8E part number. Platform hardware and the exact motherboard model can be determined with this part number.
Toshiba page for your model is HERE.
Replacement is not easy to find the motherboard. Either you try to find it Googling autour or contact Toshiba service provider in your country.
-
Replacing the motherboard on Satellite L500
I need to replace my motherboard L500. It is important to get the correct replacement.
My motherboard part non - KSWAA LA - 4983P Rev 1.0, 2009-08-04, K000084300.
I was offered a replacement of THE KSWAA - 4983P Rev 1.0, 2009-08-04, K000092510.
Is the K00... number important or is it just a serial number / lot number.
Any help would be appreciated.
Concerning
ChrisGoogling K000084300 you will find information on the optical disk drive, but using the number K000092510 result is news on motherboard for Satellite L500.
I ve Exchange motherboard only once and I have identified the right one based on the part number of the laptop (PSLxxx).
I don't know where did you want to buy this new motherboard but the store should have information about compatibility.Anyway, AFAIK this K000..., number will be used for ordering parts.
Maybe you are looking for
-
Tecra M7: Problem with graphics.
I have a problem recently with my Tecra M7. I have unwanted points and lines on the screen and also sometimes the screen is blank or vision pauses for several seconds.After my experience with desktop computers, I thought it should be the GPU, but I h
-
I received an e-mail I asked to close my Hotmail account. I do not have
Team Hotmail (* address email is removed from the privacy *) Add to contacts 12:57 AM Dear user, We hope you enjoyed our service and we have been a great help for your business. We have received your request to close your account. If this request has
-
What does Microsoft - other material lay HID input data filter [kb 911895] means?
Original title: HID filter not given user imput [kb 911895]? I had to reboot my Dell and this (microsoft-other materials lay HID imput data filter [kb 911895] what--what say.?)
-
I was able to successfully install SQL Server Express 2008, but try to install the database with tools can produce an error. The error notice States that PowerShell must be installed and installation attempts that result in an error 0 x 80070422. HP
-
WebWorks development through the deployment of visual studio plugin problem
I developed an application WebWorks using the Visual Studio plugin, now after compiling the application, I have a series of .cod files, not. bar. Documentation indicates that the blackberry - deploy command wants a .bar file to deploy the applicatio