Please comment configtool.sh hung to 20% during the RA Web application deployment

Similar Questions

• got the new ipad. during the transfer of applications, some are dark. Why?

  got the new ipad. during the transfer of applications, some are dark. Why?

  All applications are probably install and not finished yet. Make sure you are connected to a wireless network and let it enabled applications can continue to have downloaded and installed.

• Error - an internal system error has occurred. Please see DXError.log and DirectX.log, during the installation of DirectX.

  Original title: DirectX will not install.

  I blew on it this time, and I completely uninstalled DirectX to attempt to clean install it. Now, it will not install. I get the error "an internal system error has occurred. Please refer to the DXError.log and DirectX.log. "I try to install it again.
  I can't find these two newspapers anywhere, and I'm not 100% sure what to do.

  Hello TheAwesomeJoey,

  Click on item below and follow the instructions to install DirectX.

  Ko ID of Article: 179113 -how to download and install DirectX
  If this does not help, then I suggest that run you a SFC scan to see if there are corrupted files.
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  Then try to reinstall DirectX.
  Please answer back with an update on if it solves your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem blackBerry Smartphones during the update of application software

  Hi guys, I'm very new to this bear so please with me I have a little problem, this morning I received a software update notification on my phone, it's the application of security Lookout software.

  I did download the software and be downloaded completely, when asked to restart I said yes.

  Now my phone turns on and it asks me to allow or deny permissions to the application, but for some reason that so that my phone never seems to be frozen, the buttons work but the cursor will not work, I can't do anything even tried to reset the phone but still no help

  everything here got help for me

  Hello

  Thanks for the info, I tried what you suggested, but all in vain, so I had to take the phone my service provider, they said it was a software problem and they had to erase the entire phone, so now I have my phone back but with zero info on it, but Lucky for me, I had done a backup sometime ago

  Thanks again for the help

• Question of the integrity of the data during the copy of application

  Hi people
  
  I get the following error message when you copy of my application to another code. The same error occurs if I copy since in the generator, or export it and re - import using SQL Developer.
  
  ORA-02091: transaction restored return ORA-02291: integrity (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated constraint - found parent key
  
  I'm guessing that the DA is synonymous with dynamic action, which I did a lot of work on these days. Perhaps A is for stocks, but I don't see what could mean AR. affected Region? I wouldn't have missed clues if the error message mentioned the name or page number of the DA, the origin of the problem.
  
  Y at - it anyway find out what could be causing the violation of referential integrity so that I can fix or remove? There are a lot of DAs in my application? I could start looking through those with actions that affect the regions, but if someone has a better idea, I'd love to hear it.
  Concerning
  CS

  Hello Chris,

  This is APEX 4.1 bug #13441441 - "DYNAMIC ACTION AFFECTED REGION ID NOT CORRECTLY DELETED WHEN IT SHOULD BE" filed by @Anthony Rayner.

  This might help:

  {: identifier of the thread = 2332962}

  I hope that helps!
  Kind regards
  Kiran

• During the installation of Oracle sector Public Revenue Management Applications, we face "" java.lang.ClassNotFoundException: weblogic.security.Encrypt "issues."

  During the installation of Application Framework via./install.sh script, then that account activity held an entry for "WebLogic Admin User ID system" we face as "' java.lang.ClassNotFoundException: weblogic.security.Encrypt" emits messages. "

  
  

  Please, help us to solve this problem as soon as POSSIBLE.

  
  

  Details of the environment:

  Operating system: 64-bit 5U8 OEL.

  
  

  Follow-up document:

  PSRM - sector Public Revenue Management Oracle Installation Documentation (Doc ID 2067339.1)-PSRM_Installation_Guide_v2_4_0_0_0

  Error message:

  Enter the value to be encrypted: 160122:164014 < criteria > error occurred running /usr/java/jdk1.6.0_45/bin/java-Dweblogic.RootDirectory=/ebiz/app/ouaf/Release-FW-

  V4.2.0.0.0/FW. V4.2.0.0.0/data/product/WLS.splapp weblogic.security.Encrypt:

  Output is Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/security/encryption

  Caused by: java.lang.ClassNotFoundException: weblogic.security.Encrypt

  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)

  at java.security.AccessController.doPrivileged (Native Method)

  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)

  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)

  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)

  The main class is not found: weblogic.security.Encrypt.  Program ends.

  End of output

  The program finished in line 118 of the data/bin/perllib/SPL/splLog.pm.

  Error: install.plx has not completed successfully. On the way out.

  From now on, we have completed the slot status of activities for your reference.

  Sl.No	Name of the activity	Status
  1	Create users and groups

  Completed

  2

  Install prerequisite software

  Completed

  3

  Oracle 11.2.0.3 database

  Completed

  4

  Java 6

  Completed

  5

  Oracle WebLogic 10.3.6

  Completed

  6

  Hibernation 4.1.0

  Completed

  7

  Micro Focus Server 5.1 WrapPack 8

  Completed

  8

  Install Oracle Utilities application.

  Here issue facing

  9

  Install Oracle Utilities Application Framework Service Pack 1.

  Pending

  10

  Install Oracle Public Revenue Management sector

  Pending

  11

  Deploy Oracle sector Public Revenue Management application

  Pending

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Concerning

  Knani G

  Hello

  During the installation, we have wrongly given Home Directory Web Application Server like/Ebiz/app/woof/Middleware

  So we changed the Homepage Directory Web Application Server as /ebiz/app/ouaf/Middleware/wlserver_10.3

  then the problem is resolved.

  Thanks for the support.

  Concerning

  Villi Kumar

• during the installation of DirectX: error - an internal system error occurred

  Original title:

  Error - an internal system error has occurred. Please see DXError.log and DirectX.log, during the installation of DirectX.

  Help, please

  Hello

  Try this link for the complete package...  It is a package to free extraction, so careful as to where you\it extracts of... Just open the folder and double-click the DXSETUP...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• Hi, my creative cloud libraries will not work. I get a comment to "something went wrong during the initialization" and I can't save anything in a library. what I am doing wrong?

  Hello

  my creative cloud libraries will not work.

  I get a comment to "something went wrong during the initialization" and I can't save anything in a library.

  what I am doing wrong?

  

  Hi Rachel,

  Please, try the following steps:

  • Close all applications CC
  • Complete the process monitor activity/task manager (CCLibrary).
  • Restart any application and check.

  Hope that helps!

  Kind regards

  Sheena

• Best practices for migrating data tables - please comment.

  I have 5 new tables stocked with data that must be promoted an evolution to a production environment.
  Instead of just DBA using a data migration tool, they are insistent that I have record and provide scripts for each commit, in good condition, necessary both to build the table and insert the data from ground zero.
  
  I'm very little used to such an environment, and it looks much more risky for me to try to reconstruct the objects from scratch, so I already have a model perfect, tested and ready.
  
  They require a lot of literature, where each step is recorded in a document and use for deployment.
  I think their purpose is that they do not want to rely on backups but would rather than rely on a document that specifies each step to recreate.
  
  Please comment on your view of this practice. Thank you!

  I'm not a DBA. I can't even hold a candle to the fans of the forum as Srini/Justin/sb.
  Now that I'm giving a slightly different opinion.

  It is great to have, and I paraphrase of various positions
  Deployment documents,
  sign off of groups
  recovery steps
  Source code control
  repositories
  "The production environment is sacred. All the risks that must be reduced to a minimum at any price. In my opinion a DBA should NEVER move anything from a development environment directly in a production environment. 'NEVER.'
  etc etc.

  But we cannot generalize that each production system must have these. Each customer is different; everyone has different levels of fault tolerance.

  You can't wait for a change of design of the product to a cabinetmaker to go through "as rigorous than at NASA. Why would it be different for software change?

  How rigorous you put is a bit subjective - it depends on the policies of the company, experiences in society with the disasters of migration (if any) and the corporate culture.

  OP can come from a customer with lax controls. And it can be questioned if the rigour at the level of the new customer is worth it.

  To a single client, (and I don't kid), the prod password is apps/apps. (after 12 years of being alive!) I was appalled at first. But it's a very small business. They got saddled with EBS during the .com boom Hay days. They use just 2 modules in EBS. If I speak of creation (and charge) these documents/processes, I would lose the customer.
  My point is that not all places must or want these controls. By trial and error, you get what is the best company.

  OP:
  You said that you're not used to this type of environment. I recommend that you go with the current first. Spend time on understanding the value/use/history of these processes. Ask if they still seem too much to you. Keep in mind: this is subjective. And if it comes down to your existing reviews of the v/s, you need either an authority OR some means of persuasion (money / sox (intentional typo here) / beheaded horse heads... everything that works!)

  Sandeep Gandhi

  Edit: Typo-detail fault

  Published by: Sandeep Gandhi, independent Consultant on 25 June 2012 23:37

• 2 questions here please: during the unlocking process: it says that I need to erase everything on my iphone. So, what of my contacts? How can I get that back?

  2 the questions here please:

  During the unlocking process: it says that I need to erase everything on my iPhone 5 s. So, what of my contacts? How can I get that back? because the backup to icloud it nor iTunes.

  In addition, what happens if I do not erase the content? That will prevent my form of phone is unlocked?

  Thank you very much

  RAJS

  Do not erase everything on your phone under the procedure of release.  If you have your phone set to backup Contacts on iCloud, they will be saved and then can be later reloaded on your phone after erasing it.  I just got two iPhone 5 and it worked well.  Also to do a full backup to your computer via iTunes and transfer everything what is not already saved if you are asked.  The only problem I encountered was that some applications does not and I had to manually reinstall the.

• "Please install the System86.dll file that is missing from the computer" during the installation of games

  Original title: "System86.dll"

  I'm having a problem during the installation of 3D games in window 7 ultimate

  Error code is: System86.dll

  I was using Window 7 Ultimate for a while, before a few days ago, when I tried to install the game in 3D (prince of Samuel), during installation, he gave me the message"Please install the file System86.dll which is missing from the computer" (sorry if my text is false I forgot the wording).

  Now, let me tell you what I did before: -.

  • I tried to restore my window
  • I sccaned my PC all a care as well as the microsoft essential security
  • What are malicious files had been found by Anti virus, they have all been deleted

  Can someone tell me how to get in touch with the support of microsoft agent?

  Thank you for reading my message, your response would be appreciated

  Take care of your self!

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/d08707ca-D670-4dae-9E12-5936ef6fb486

  If your version of win has pre-installed support is done by the manufacturer of your PC, MS, other support that the critical updates, is paid for request for assistance, unless you have a commercial version of victory

• During the reinstallation of XP, message "Please wait" frozen and inactive computer

  Recently, I tried to reinstall Windows XP SP2 from an installation disc that came with my computer. Before reinstallation, it was under XP SP3.

  He went through the installation process. It appeared that the installation is complete. It restarted (for the second time during the installation) and engaged in the usual Windows XP loading screen and now froze on a similar screen that displays the message "Please wait" instead of the loading bar. I waited for several hours, and the screen has not changed. The computer makes no noise and doesn't seem to be something.

  What should I do?

  Hello

  ·        You are able to boot into safe mode without any problem?

  ·        Did you do a fresh install with formatting or without formatting the hard drive?

  Method 1:

  I suggest you to disconnect all external peripheral devices that are connected on the system such as (printers, scanners, etc.) and check if you are able to boot to the desktop.

  Method 2:

  Step 1:

  I suggest to start in safe mode and check. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. Select the startup options safe mode and press to enter.

  If you are able to boot into safe mode without any problems then, it might be a problem with the graphics card drivers that are installed on the system. I suggest to disable the video card drivers from the start in safe mode and then try to boot to the desktop and check.

  Step 2:

  To turn off the graphics card driver, follow the steps mentioned below.

  a. click on Start menu and click Control Panel.

  b. click System and click the Hardware tab.

  c. click the Device Manager button and right-click on the graphics card driver that is present.

  d. click on uninstall and then try to boot to the desktop and check.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please

  Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please

  Use the phone activation, do not meet all the prompts until the opportunity to talk to a real person

• I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  I get the error code 643 during the installation of the dates... I tried yesterday, some steps that have been put to me... they did not work... Please help

  There are 2 updates will not install... Ive had this problem for the last 6 months

  See if this Microsoft Support will help you:

  http://support.Microsoft.com/kb/976982

  Note: there are 2 methods. If the August challenge it for me does not help, try a 2nd.

  Another article to number 643
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070643

  .........................................................................................

  Take a look at this answer of MS Answers forums:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/what-is-error-code-643-Windows-vistaunable-to/4ab6dd4e-e9eb-4a0f-b822-ad976e2c33c6

• An error occurred during the installation of Adobe AIR 3. Installation may not be allowed by your administrator. Please contact your administrator.

  I shows that I have air adobe like installation, but I tried to upgrade to adobe 3. I get this message: an error occurred during the installation of Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator. I am the administrator. How can I solve this problem? Thank you

  Hello

  1. have you made recent changes to your system?

  See the link below and check if it helps.

  http://kb2.Adobe.com/CPS/403/kb403150.html

  It will be useful.