Please help: NAT (inside) 0 0 0 and NAT (inside) - access list 0

I have a problem with my PIX firewall.

I don't want any NAT to the origin of traffic inside the interface.

When I give

NAT (inside) - 0 80 access list

access ip-list 80 allow a whole

It works very well

But when I tried

NAT (inside) 0 0 0

ITZ not working is not for my IPsec clients

According to my knowledge PIX requires input NAT to allow traffic from security interface higher to lower security interface. Can I use NAT 0 by which I can get around the NAT.

Help, please?

Hello

identity nat works with access-list... IE nat 0 statement with an ACL... or you can specify the network... don't know if you can put 0 0... I have not seen that someone put this...

refer to the documentation of nat for this command:

http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/PIX/pix_sw/v_63/cmdref/Mr.htm#wp1161298

to the first config... That's right... who has a list of acess 80!

REDA

Tags: Cisco Security

Similar Questions

  • Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

    Computer Mangement.lnk unspecified error. Please help me by saying its cause and what could be the solution for it.

    Clear the error on windows server 2008. All of the above files are locked.  We maintain active directory on and it is also not working.

    Help, please.

    Hello

    I suggest you to ask your question at the following link.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

    I would also ask you to contact your IT Department for further explanations.

    I hope this helps.

  • Hi Please help me B1-711 were break and I don't have any apk rom? What should I do?

    Hi Please help me B1-711 were break and I don't have any apk rom? What should I do?

    It may start at Acer logo?

    If so try to factory reset using the key combination:

    http://Acer--UK.custhelp.com/app/answers/detail/A_ID/29892/~/Acer-Iconia-B1-A71-and-B1-710-factory-d...

    the download of rom is for version ww_GEN1:

    Acer.AV0K0.B1 - 711.RV02RC05.WW.GEN1

    must be updated via microSD update

    http://global-download.Acer.com/GDFiles/OS/OS/OS_Acer_Acer.AV0K0.B1-711.RV02RC05.WW.GEN1_A44K_A.zip?...

  • I'm trying to stop my creative with my students cloud subscription, please help! He just automatically renewed and I didn't want it.

    I'm trying to stop my creative with my students cloud subscription, please help! He just automatically renewed and I didn't want it. When I go online to cancel it and he tells me that my options of communication, the forum is the only one available.

    This is an open forum, not Adobe support... Click below

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

    Cancel https://helpx.adobe.com/creative-cloud/help/cancel-membership.html

    -or https://helpx.adobe.com/contact.html?step=ZNA_account-payment-orders_stillNeedHelp

    -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

    If the above does not work, you will need to contact cat

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

    Do NOT let the cat shipment no one will remind you this forum... only Adobe can help, nobody here can access the activation server

  • I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works

    I bought the lightroom 6 worked fine, now it used to open when I try to open the Dungeon of circle of color on spining and wont start, I work with mac, please help me, tried to shut down and restart, nothing works?

    Try to hold the alt/option key while you restart Lightroom. Make sure that the right catalog file is selected and click on the "integrity test" box to see if there is a problem with the catalog file that might be repaired.

  • Please help me with the video card and power supply issues!

    Hello and thanks in advance for any help. I'll try and do a short explanation, but I can't promise anything. I bought an a6620f Pavilion about 2 months ago I didn't know that you had to purchase a special hardware in order to play video games. In any case, I bought about 300.00 worth of new video games and none of them works. they say because of my video card. Then try to buy a new video card and it won't work because I only have a 250 watt power supply. I spoke with a hp technician before you buy a PSU and I was told that my motherboard was only designed to use a 300 watt max power I tried to buy one at best buy and the clerk said 4500 is the smallest they sell. and I need at least a 400 Watt or powerrsupply to make the new video card with a value of buyiong. My questuion is what can I do if I can't buy one more big power supply how can I install a new video casrd? Please help me I'm lost

    Oh and in case you want some specs on my system here are a few

    Windows Vista Home premium service pack1
    HP Pavilion a6620f
    Processor: pentium dual core cpu e5200 @ 2.50 GHZ
    memory: 4.00 GB
    system type: 64-bit operating system
    Version of DirectX 10
    graphics card: intel GMA 3100 Total memory 256 MB

    Message edited by chefinomaha on 06/03/2009 16:38

    Hi chefinomaha,

    Sorry to hear about your frustration. Here's some good news.

    I think you have been misinformed or there was a communication error. Your motherboard should not be limited to the only 300W. I don't know with certainty how high you can go in watts, but you can go higher and should go higher, if you add a video card.

    The important thing is to get the right kind of diet that fits your connectors.

    Here's your motherboard page.

    Here is a document with step-by-step instructions and video for adding a video card.

    Here is a document with the video to replace the power supply.

  • Please help: registry error 80246008 BITS missing and service for win vista 32-bit

    Hello, I am running Windows Vista Home Premium 32-bit with SP2 and recently met a problem trying to get windows updates. I spent days reading post and the windows support and community application solves nothing doesn't. I receive the error 80246008 so they were trying to get updates. I followed of many positions and patches with a limited degree of success recommended. I have windows update to activate and my COM + service is on and working but my smart information transfer Service does not appear in my register and the list of services. I saw the patches for other versions of windows, but not for Vista, maybe I'm just blind? Any help would be greatly appreciated even if your just pointing me in the right direction. On another note, I can't get MSE update of virus definitions, related question, I guess? Don't know if this helps, but if there is any other information I can provide to assist with a solution let me know and ill update this post with it. A hugh thanks to anyone who can help.

    Hi Thagangrel,

    I see that you get the error 80246008 while trying to install updates. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. you make changes to the computer before the show?

    3. who update fails with this error?

    Method 1.

    Run the utility of automatic troubleshooting of this article.

    Windows Update, error 80246008: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80246008

    Method 2.

    Follow the steps in this article.

    Windows Update, error 80246008: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-80246008

    Method 3.

    Start the computer in safe mode with network and perform a virus scan.

    Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 4.

    I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

    Method 5.

    Start the computer in a clean boot state and then try to install the updates. A clean boot to test if any element of service or third party application startup is causing this issue.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

    Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

    Refer.

    Problems with the installation of the updates: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-installing-updates

    Try these steps and let us know the status.

    Thank you.

  • Please HELP Microsoft Visual C ++ Runtime Error and Microsoft Security Essentials

    I don't know where to post this option for assistance. A couple of weeks, I started to have problems with Microsoft Security Essentials. The program said that it could not turn on real-time protection. This operation returned because the time limit has expired. I followed the instructions to restart by typing services.msc, then click start to start the service by choosing Microsoft Antimalware Service, properties, choose automatic or stop, and then start. It wouldn't be long before the service stops again. I did 2 restorations system. One of the dates worked briefly, the other did not work at all. It still would not begun.

    Now, I get the following message: Microsoft Visual C ++ Runtime LIbrary, this application has requested the execution in an unusual way. For more information, contact the application support team. There is no location in this message, and it appears once the computer is completely closed and powered up. I have to start it in safe mode, or I am totally unable to get windows sign in screen. Once I start it in safe mode, I, once again, am responsible to activate the time protection real Microsoft Security Essentials. More often then not I can't turn it on at all. When I am able, it isn't long before that I'm right back where I started, could not start windows normally.

    Help, please. Thank you

    Have you tried to uninstall and reinstall Microsoft Security Essentials?

  • BlackBerry smartphones Please HELP! BlackBerry ID forgotten password and my address email is wrong!

    Please can someone help me?  I want to pull out my hair! Yesterday, I upgraded my BBM and rebooted my machine, when I went into my bbm again once he asked me my password Blackberry ID, which I forgot BUT my email address (which is the user name), I registered with is bad, so I can't even change my password because I used to receive e-mail.  My Blackberry ID is now locked, because I entered the password wrong too many times.  I can not access my BBM at all.  Please, please, please is there anyone out there who can help me?

    Hi, I had to save it to my PC and do a cleaning safety and everything over again.  But my problem is solved.  Doing so removes it from security wipe the Blackberry ID on the phone (and other applications) I then re-joined a new Blackberry ID with the correct email address.  I will never never ever forget my password

  • Please help with simple code. Photo and text formatted.

    Hello
    I want to design a HBox. I want to put the image on the left and the text on the right and the bootom. I have 2 problems.

    1. I want to start the text when the image finishes leaving 10 pix in between.
    2. I want the text under the picture too.

    Here is my code.

    Help, please.

    <? XML version = "1.0" encoding = "utf-8"? >
    "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" >
    < mx:HBox id = "LowerLeft" width = "30%" height = "80%" borderStyle = "solid" borderColor = "#fffffc" borderThickness = "2" >
    < mx:Image id = "image1" source = "1.jpg" height = "100" width = "150" / > "
    < mx:TextArea height = "172" width = "288" horizontalScrollPolicy = "off" verticalScrollPolicy = "off" letterSpacing = "1" backgroundAlpha = BorderThickness upper "0" = "0" fontSize = "12" fontFamily = "Times New Roman" wordWrap = "true" textAlign = "left" backgroundColor = "#869 ca 7" color = "#ffffff" >
    < mx:htmlText >
    <! [CDATA [it comes to cardiovascular medicine.translate the extraordinary progress to promote cardiovascular health.] At the level of the core of SCVI is a richl as he iscardiovascular medicine

    It comes to cardiovascular medicine.translate the extraordinary progress of science and the rich thing.

    Cardiovascular MedicineThis is cardiovascular medicine.translate the extraordinary progress. []] > < / mx:htmlText >
    < / mx:TextArea >
    < / mx:HBox >

    < / mx:Application >

    You could add the image inline with the html text and the text to wrap around the image.

    TS

  • 4 - 1106TU envy: Please help. I have this error and no idea how to solve this problem

    Vman19 wrote:
    No guarantee. Can you tell where I can buy one online. The exact hard drive for my laptop. Bunch for your help thank you

    This will depend on where your locate in? If the United States then look at Newegg for a replacement HARD drive, but I would like to ask did you a defined HP recovery disk? If this isn't the case, then you must order these discs at HP and then use them to format and restore the software from the factory to the laptop to make it work. But instead of recovering the HARD drive I would say than to invest in a SSD which will make more efforts to improve the use of your computer. Assuming you want an SSD.

  • Could someone please help with two differences between CS and CS4?

    Hello, I have just moved from Photoshop CS to CS4 and have a few questions about the differences I see in both versions.

    (1) for the opening of files, I'm used to open them in a smaller view like the individual windows.  CS4 open all the images in the expanded view.  Is there a way to avoid this?  I create massive sports photo (often more than 100 images) galleries generally open 25 to 30 images at the same time and minimize all images and work on it at the same time in chronological order.  It was CS4 open these images in full screen, it prevents me from doing this within a reasonable time - PS never opens a group of photos in a true chrono order.  He lost the first frame at the end.

    (2) to the CS, I used to power the mouse right click on the title bar of the image to change the image and canvas size.  Is it possible to get it works in CS4?  CTL + ALT and I or C is a process of three keys and takes considerably longer than right click of my mouse and choosing the correct option.

    Thanks for any help you can provide.  And apology for have such a beginner to the latest and greatest version of Photoshop.  I lived in CS years

    Mike

    Photoshop CS4 preferences > Interface gives the option to "Open Documents as tabs". If checked, this option opens in view 'tab' in which the image occupies the entire screen. Uncheck the option opens in "floating" mode, which allows multiple images to be displayed to the screen. What is the mode opens, you can switch to the other via the window > reorder the options 'Float in the window' or its opposite "consolidate all windows." Another way to switch tabs floating mode is to drag the title bar of image in the display area. Similarly, you can move from floating tabbed by dragging the title bar in the area of the tabs.

  • NAT with access-list

    Now,.

    I want nat by looking at the destination address.

    example if destination is A nat for x pool network, and if the destination is something different then nat to the pool of y.

    IOS supports natting with ACLs and road maps.

    but as stated in the order reference specifying acl is valid only for the nat 0.

    So how can I nat based on destination address.

    is it possible with pix?

    If so, how?

    Thanks in advance

    You can not do conditional NAT based on destination on the Pix address. The only way to achieve this would be to have several interfaces with itineraries that would send traffic for each interface, NAT them as appropriate.

  • My ipod screen is black and I can not turn on, please help

    Hi my iPod Touch 5th generation 16 GB, exploded some 2 to 3 months ago. I turned on, but he couldn't come. I loaded but there was no indication that he was in charge. I connected it to my computer but itunes does not read, the screen is all black all the way. Please help me set up my iPod and the recovery/rehabilitation to zero.

    Thank you very much

    Did you try restarting force (now Home and power keys rack for 20 sec)?

  • Hi, lost all my favorites... won't let me sign in the habit/recognize the password... will not send confirmation e-mail. WTF... Please help fast.

    Hi, lost all my favorites... won't let me sign in the habit/recognize the password... will not send confirmation e-mail. WTF...

    Please help, I just changed to Chrome and it's my first experience...

    Do you know why your bookmarks have disappeared?

    What the rest of the profile?

    Look at your desktop. You see a folder called; Old Firefox?

    https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

    https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

    Start Firefox in Safe Mode {web link} by holding down the < shift >
    (Mac options)
    key and then from Firefox. Is always the problem?

Maybe you are looking for

  • Expansion of memory just for my P30

    Can someone tell me if this is the right unit of 512 MB for my P30? -"Corp 512MB SODIMM PC2700 memory." If Basic Help, West a photo on this site: http://www.MPX.no/aspx/prdinfo.aspx?plid=42500 Thank you!

  • Satellite L500 19 X battery discharge when not in service

    My new and practically unsused portable is its battery at the rate of 10% in 48 hours when it is turned off and not in hibernation mode. To remove the battery is losing 2% within 48 hours. I fully charged the battery to 100% and closed while still in

  • Y500 Lenovo webcam has stopped working.

    Hello, recently I bought a Y500.After installing Windows 7 X 64 and start a conversation on Skype fot the first timeWebcam worked without problem. After two days, I tried to make a video call, but the unit does not startCircle turns the camera LED li

  • How can I connect HDTV and LCD to PC using the two - as a dual monitor.

    I recently bought the PC HP Pavilion a6600f w1707 with HP. I also bought a DVI cable to HDMI to connect PC to Samsung HDTV. I can use the VGA cable to connect the monitor and cable DVI to HDMI to connect to HDTV, but log off for the other use. Is it

  • 2-sided Photosmart7520 jams

    I tried 2 sided for the first time on my new Photosmart 7520. On each of the attempts about 10, after having successfully through the power supply at the rear the cluttered the frit paper roll feed as if it was not turning. I tried several times to d