Please ME TELL WHAT Cisco VPN internal Service Module
I do not know what is the internal service of cisco vpn module, how it words, and where we can use it.
Hello
Cisco internal VPN Service Module is a Cisco ISR G2.
I would say that the main goal is the ability to offload the encryption to a dedicated service module. Dedicated encryption protects performance when CPU utilization for other services.
You can find the data sheet here:
http://www.Cisco.com/en/us/prod/collateral/modules/ps2706/ps12202/data_sheet_c78-682436.html
Also on the card you will find what routers support this module.
Please evaluate the useful messages
Best regards
Eugene
Tags: Cisco Security
Similar Questions
-
Help, please! Microsoft Vs Cisco VPN Client VPN
Could someone please indicate if the Cisco VPN Client is safer than the VPN integrated Microsoft on windows XP? If the Cisco client is more secure than why? Microsoft it does not use IPSEC and PPTP right?
Please advise - very urgent!
I don't know a customer Cisco Cisco VPN concentrator is safer, but I'm not sure exactly why.
Carlton,
Take a deeper look at the same time, all your questions will be answered once you look at these links.
IPSec is a Cisco VPN standard, open customer or any customer VPN IPSec based should meet these standards. You'll learn more by reading these few bellow of links at the end of the reading you will be to have a better
perspective on the customer you would gear more to use as a professional network.
Personally, I've been away little by little PPTP and substituting Cisco VPN clients. Don't get me wrong, PPTP is still widely used there, but it is more vulnerable.
With Ipsec VPN, you have a wider choice of authentication algorithms, to base
granularity of ciphers as a way to implement a secure VPN extreamely for RA architecture
Introduction to IPsec
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_tech_note09186a0080094203.shtml
Introduction to PPTP/L2TP
http://www.Clavister.com/manuals/ver8.6x/manual/VPN/pptp_basics.htm
Analysis of vulnerabilities and implementation MS PPTP
http://www.Schneier.com/paper-PPTP.html
http://www.Schneier.com/paper-PPTP.PDF
Alternative workaround to use client MS using L2TP over Ipsec
In addition, you can do a google search on "hacking PPTP" or "Ipsec" to preview more vulnerabilities.
Rgds
Jorge
-
Hi Expert,
Do I have to purchase a license function HSECK9 to activate the module ISM-VPN-29.
HQ_2921 #show license
1 function of the index: ipbasek9
Time left: life
License type: Permanent
The license status: Active, in use
Number of licenses: not counted
License priority: medium
Function index 2: securityk9
Time left: life
License type: Permanent
The license status: Active, in use
Number of licenses: not counted
License priority: medium
Index 3 function: uck9
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Index 4 function: datak9
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Index 5 function: doorman
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Index 6 function: SSL_VPN
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: 0/0 (in-use/Violation)
Priority of license: no
Index 7 feature:-ips-updated ios
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Function index 8: SNASw
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Index 9 function: hseck9
Function index 10: cme-srst
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: 0/0 (in-use/Violation)
Priority of license: no
Index 11 function: WAAS_Express
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Index 12 function: UCVideo
Time left: not enabled
Period of opportunity: 0 minute 0 second
License type: EvalRightToUse
The license status: don't use, not accept EULA
Number of licenses: not counted
Priority of license: no
Boren,
To take full advantage of the hardware, you should have hseck9, seck9 license is the application software (through MEL) limit.
M.
-
What are the ports used by the Cisco VPN Client?
Hello
I need to open my outgoing traffic on my firewall to allow two interns (LAN) Cisco VPN Client to connect to their Internet virtual private network.
I already opened the port 500/UDP, but they are not able to connect. If I open all outgoing ports, they can connect.
What are the ports used by the Cisco VPN Client?
Thank you
You need to open:
UDP 500
ESP protocol
You must also open the UDP 4500 port (if using NAT - T).
In addition, if the clients are connecting to a VPN 3000 Concentrator series and it is configured for all other options of NAT-transparency, corresponding ports must be open. By default:
1. If using IPSec over TCP 10000, then open TCP 10000.
2. If using IPSec over UDP 10000, open UDP 1000.
-
Cisco vpn client to connect but can not access to the internal network
Hi all
I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network
Any help would be much appreciated.
Hi Samir,
I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml
(The link above includes split tunneling, but this is just an option.
Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.
Let me know if this can help,
See you soon,.
Christian V
-
Please give index on configuring vpn site to site on 881 to ASA 5505 cisco router
Earlier my boss asked me to prepare to implement the VPN site-to site on router Cisco 881 Integrated Services to ASA 5505 router, which is now running on the side of HQ. Someone please give me a hint. I am now learning the pdf file from Cisco that mention how to configure VPN site to site between 1812 Cisco IOS router and router of the ASA 5505 using ASDM V6.1 and SDM V2.5. Cannot find the book for the Cisco 881 device.
Someone please please suggest me something as soon as POSSIBLE.
Thank you
CLI version:
ASDM and SDM Version:
-
Cisco VPN Client - what are the ports I need to open the 1841?
Hello. As it says on the Tin really, what are the ports I need to allow my access on our 1841 list to allow the Cisco VPN client on through it?
Ta
UDP 500 (isakmp)
UDP 4500 (nat - t)
Protocol ESP 50
-
What clients VPN Cisco 2811 supports?
Is the solution of VPN Cisco 2811 locked customers cisco or that market with other brands too?
Best regards Tommy Svensson
Hello
With the correct IOS feature set, it will support IPsec VPN clients. This includes not only the Cisco VPN client but almost any standard IPsec client.
In addition, if on the 2811 can accept any browser SSL VPN connections, or even use the AnyConnect SSL client.
It will be useful.
Federico.
-
Hi guru of cisco
Help me please to configure VPN access on ASA 5505 for Cisco VPN Client. I want to let the customers gateway, but access remote 192.168.17.0/24 and 192.168.10.0/24 (connected through site-to-site) networks.
Will be much appreciated for your help.
My config:
Output from the command: 'display conf '.
!
ASA Version 8.2 (2)
!
name of host host1
domain domain name
activate the encrypted password password
encrypted passwd password
names of
!
interface Vlan1
Description INTERNET
0000.0000.0001 Mac address
nameif WAN
security-level 0
IP address a.a.a.a 255.255.255.248 watch a1.a1.a1.a1
OSPF cost 10
!
interface Vlan2
OLD-PRIVATE description
0000.0000.0102 Mac address
nameif OLD-private
security-level 100
IP 192.168.17.2 255.255.255.0 watch 192.168.17.3
OSPF cost 10
!
interface Vlan6
Description MANAGEMENT
0000.0000.0106 Mac address
nameif management
security-level 100
IP 192.168.1.2 255.255.255.0 ensures 192.168.1.3
OSPF cost 10
!
interface Vlan100
Failover LAN Interface Description
!
interface Ethernet0/0
!
interface Ethernet0/1
Shutdown
!
interface Ethernet0/2
Shutdown
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
switchport access vlan 100
!
interface Ethernet0/6
switchport trunk allowed vlan 2.6
switchport mode trunk
!
interface Ethernet0/7
Shutdown
!
boot system Disk0: / asa822 - k8.bin
passive FTP mode
DNS domain-lookup WAN
DNS server-group DefaultDNS
Server name dns.dns.dns.dns
domain domain name
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group service RDP - tcp
RDP description
EQ port 3389 object
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-protocol udp
object-tcp protocol
Access extensive list ip 192.168.17.0 LAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
Standard access list LAN_IP allow 192.168.17.0 255.255.255.0
WAN_access_in list of allowed ip extended access all any debug log
WAN_access_in list extended access allowed icmp a.a.a.a 255.255.255.248 192.168.10.0 255.255.255.0 inactive debug log
WAN_access_in list extended access permit tcp any object-group RDP any RDP log debugging object-group
WAN_access_in list extended access allowed icmp a.a.a.a 255.255.255.248 a.a.a.a 255.255.255.248 debug log
MANAGEMENT_access_in list of allowed ip extended access all any debug log
access-list extended OLD-PRIVATE_access_in any allowed ip no matter what debug log
access-list OLD-PRIVATE_access_in allowed extended object-group DM_INLINE_PROTOCOL_1 interface OLD-private 192.168.10.0 255.255.255.0 inactive debug log
access-list OLD-PRIVATE_access_in allowed extended object-group TCPUDP interface OLD-private no matter what inactive debug log
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.10.254 interface private OLD newspaper inactive debugging
access-list OLD-PRIVATE_access_in allowed extended icmp host 192.168.17.155 interface private OLD newspaper debugging
access-list 101 extended allow host tcp 192.168.10.7 any eq 3389 debug log
Access extensive list ip 192.168.17.0 WAN_1_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_cryptomap_2 to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.0
Capin list extended access permit ip host 192.18.17.155 192.168.10.7
Capin list extended access permit ip host 192.168.10.7 192.168.17.155
LAN_access_in list of allowed ip extended access all any debug log
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.10.0 255.255.255.0
WAN_nat0_outbound list of allowed ip extended access all 192.168.17.240 255.255.255.252
WAN_nat0_outbound to access extended list ip 192.168.2.0 allow 255.255.255.0 192.168.2.0 255.255.255.248
Access extensive list ip 192.168.17.0 WAN_2_cryptomap allow 255.255.255.0 192.168.10.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.10.0 255.255.255.0 192.168.17.0 255.255.255.0
LAN_IP_inbound list standard access allowed 192.168.10.0 255.255.255.0
Standard access list IPSec_VPN_splitTunnelAcl allow a
access extensive list ip 192.168.17.0 vpnusers_splitTunnelAcl allow 255.255.255.0 any
sheep - in extended Access-list allow IP 192.168.17.0 255.255.255.0 192.168.2.0 255.255.255.0
vpn_ipsec_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0
pager lines 24
Enable logging
logging trap information
asdm of logging of information
Debugging trace record
MTU 1500 WAN
MTU 1500 OLD-private
MTU 1500 management
mask 192.168.1.150 - 192.168.1.199 255.255.255.0 IP local pool VPN_Admin_IP
IP local pool vpnclient 192.168.2.1 - 192.168.2.5 mask 255.255.255.0
failover
primary failover lan unit
failover lan interface failover Vlan100
15 75 holdtime interface failover pollTime
key changeover *.
failover interface ip failover 192.168.100.1 255.255.255.0 ensures 192.168.100.2
ICMP unreachable rate-limit 1 burst-size 1
ICMP permitted host b.b.b.b WAN
ICMP allow 192.168.10.0 255.255.255.0 WAN
ICMP permitted host c.c.c.c WAN
ICMP allow 192.168.17.0 255.255.255.0 WAN
ICMP deny any WAN
ICMP permitted host OLD-private b.b.b.b
ICMP allow 192.168.10.0 255.255.255.0 OLD-private
ICMP allow 192.168.17.0 255.255.255.0 OLD-private
ICMP permitted host c.c.c.c OLD-private
ICMP permitted host b.b.b.b management
ICMP permitted host 192.168.10.0 management
ICMP permitted host 192.168.17.138 management
ICMP permit 192.168.1.0 255.255.255.0 management
ICMP permitted host 192.168.1.26 management
ASDM image disk0: / asdm - 631.bin
don't allow no asdm history
ARP timeout 14400
Global (WAN) 1 interface
Global (OLD-private) 1 interface
Global interface (management) 1
NAT (OLD-private) 0-list of access WAN_nat0_outbound
NAT (OLD-private) 1 0.0.0.0 0.0.0.0
WAN_access_in access to the WAN interface group
Access-group interface private-OLD OLD-PRIVATE_access_in
Access-group MANAGEMENT_access_in in the management interface
Route WAN 0.0.0.0 0.0.0.0 a.a.a.185 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.1.0 255.255.255.0 WAN
http 0.0.0.0 0.0.0.0 WAN
http a.a.a.a 255.255.255.255 WAN
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Service resetoutside
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto WAN_map 1 corresponds to the address WAN_1_cryptomap
card crypto WAN_map 1 set peer b.b.b.b
WAN_map 1 transform-set ESP-DES-SHA crypto card game
card crypto WAN_map WAN interface
ISAKMP crypto enable WAN
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
the Encryption
sha hash
Group 1
life 86400
Telnet timeout 5
SSH b.b.b.b 255.255.255.255 WAN
SSH timeout 30
SSH version 2
Console timeout 0
dhcpd auto_config OLD-private
!a basic threat threat detection
host of statistical threat detection
Statistics-list of access threat detection
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
NTP server 129.6.15.28 source WAN prefer
WebVPN
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec svc webvpn
internal admin group strategy
group admin policy attributes
DNS.DNS.DNS.DNS value of DNS server
Protocol-tunnel-VPN IPSec
internal vpn_ipsec group policy
attributes of the strategy of group vpn_ipsec
value 192.168.17.80 DNS server dns.dns.dns.dns
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpn_ipsec_splitTunnelAcl
the address value vpnclient pools
username admin password encrypted password privilege 15
n1ck encrypted password privilege 15 password username
type tunnel-group admin remote access
tunnel-group admin general attributes
address pool IPSec_VPN_pool
vpnclient address pool
LOCAL authority-server-group
strategy-group-by default admin
tunnel-group admin ipsec-attributes
pre-shared-key *.
tunnel-group b.b.b.b type ipsec-l2l
tunnel-group b.b.b.b General-attributes
strategy-group-by default admin
b.b.b.b tunnel ipsec-attributes group
pre-shared-key *.
NOCHECK Peer-id-validate
type tunnel-group vpn_ipsec remote access
tunnel-group vpn_ipsec General-attributes
vpnclient address pool
Group Policy - by default-vpn_ipsec
vpn_ipsec group of tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmpThanks a lot for the confirmation. There is some lack of configurations and also some configuration errors.
They are here:
(1) Split tunnel-access list is incorrect:
vpn_ipsec_splitTunnelAcl list standard access allowed 192.168.2.0 255.255.255.0
It should be allowed in your internal network. Please, add and remove the following:
standard access list vpn_ipsec_splitTunnelAcl allow 192.168.17.0 255.255.255.0
No vpn_ipsec_splitTunnelAcl of the standard access list only allowed 192.168.2.0 255.255.255.0
(2) NAT 0-list of access should also include the traffic between the local subnet to the Pool of IP VPN:
Access extensive list ip 192.168.17.0 WAN_nat0_outbound allow 255.255.255.0 192.168.2.0 255.255.255.0
(3) dynamic-map has not been created and assigned to crypto card:
Crypto-map dynamic dynmap 10 game of transformation-ESP-3DES-SHA
card crypto ipsec WAN_map 65000-isakmp dynamic dynmap
(4) Finally, you have not enabled protocol IPSec in your group strategy:
attributes of the strategy of group vpn_ipsec
Protocol-tunnel-VPN IPSec
Hope that helps.
If it still does not after the changes described above, please kindly share the latest config and also the output of the following debugs when you try to connect:
debugging cry isa
debugging ipsec cry
-
Is there really a customer Cisco VPN for Linux? _Really? _
Hello people,
I finally after almost a brain aneurysm trying to think too hard I have my Cisco 881 - SEC - K9 router configured properly for a multi-point my Amazon Virtual Private Cloud IPSec VPN tunnel, so that the obstacle is finally spent, and I think that it has been a very important step in my life somehow. I never thought I'd see the day, I actually got my hands on a legitimate Cisco non - stink... uh... I mean, non-linksys router. Now I can't find a "client" VPN for Linux program. I am running a Xen Hypervisor environment on openSUSE Linux because it is the only Linux distribution that fills all my laborious requirements in a Linux server environment. It is also the most mature and sure Linux on this planet, making it the most significant Linux distribution for my research needs. Using NetworkManager is not really an option for a Linux based server environment and OpenVPN is just too complicated to understand for my little tiny head. I've heard of some mysterious "easy VPN", but after that hours of digging online there is no information on this subject, even the Cisco download link leads to a Page not found error. I see a Linux VPN API for the AnyConnect program, but is it a real VPN client, or just an API? It seems to want my money to download it, but I have no money nor I really know what it is because it's all closed, the secret-like source and I can not even find a simple README file on him explaining what it is exactly. I'm just a developer of off-work software attempts to connect to my home for personal use router and I can not really afford to more than $ 1 million for a single program I will only need to download once in my life that should have been included with the router in the first place of the fork. I have that more volunteer will probably not yet able to understand how to use the program when even because I don't know anything about VPN connections, that's why I bought this router so I can try to figure it all out as part of the open source nonprofit, research, I am currently conducting. Is there some sort of period of evaluation or trial for personal use? Which would be really good if I could at least know if I will be able to understand or not. I hate throwing money when it is in such a shortage these days. Is there really no alternative to a Cisco router. It is an absolute necessity for the things I'm trying to accomplish, so try to settle for something else and past with my life isn't really an option. No, it's something that I just need to raise its head on and finish.
I may be a little too crazy in me for my own good, but I don't see why it should take so much money just to learn to do something for personal use, it is not really a skill that I would never use otherwise. Wouldn't be great if Cisco did their VPN client open-source and free for the public to use and modify, improve, learn and to grow and bring the whole world together in a community? Even the source code to the discontinuous old Cisco VPN client could be used as a tool for learning valuable for some poor student hungry or developer of Open Source software somewhere trying to cope with Sauce and Ramen noodles noodles Ramen on toast (don't tell me you've never thought about it). With the ripple effect, it would significantly improve sales over time, because it would open the door to a whole new market where could those who previously could not afford to participate now. That's the real power of Open Source. It creates a more skilled workforce for the future by contributing openly and share knowledge. What happens if the next big internet technology and the solution to the global tyranny - the solution to end all wars forever - locked in the mind of a software developer to unemployment, which could not afford to upgrade their software to router from cisco or access the software they need because he was source closed and required engage in a costly to download service contract? It would be just terrible, wouldn't it? I guess there is no way to ever know for sure. I guess I'd be as happy if a kind soul out there could tell me an alternative easy to use for one always on the VPN connection that is running in the background that does not require NetworkManager or having to spend days days searching in and trying to figure out some really poor or extremely complex documents? I apologize for all the sentences run on posed as a question, but just a few serious mental exhaustion of this, being unemployed is a few people from hard work. I really could use a vacation. Maybe a camping on the coast trip is in order after I get this job, that sounds nice, isn't it? Nothing like a summer storm on the beach to the ocean--away from technology - to refresh the mind.
I won't step in all the discussions in there, but you might want to look into is vpnc and openconnect.
The two opensource projects that seem to work with devices Cisco, for a long time, I've been a user of vpnc.
http://www.infradead.org/openconnect/
http://www.UNIX-AG.uni-kl.de/~Massar/vpnc/
Looks like some of your questions, concerns should be directed to your Cisco rep.
There is an AC for Linux client (component the GUI and CLI). If you have problems finding - get it from 'package' (for linux) file, which is essentially a zip.
-
Cisco VPN Client anything cannot access through VPN on an ASA5505 8.4
Hello
Completely new to Cisco ASA and the need to get this working ASAP.
8.4 (1) ASA 5505 is the secondary FW and I need to authorize all out and block everything coming, but for the VPN clients. Since a jerk of Cisco, I used the ASDM and it's sorcerers to make this work, which may explain my situation.
192.168.101.0/24 is the local network
192.168.101.5 is the IP of ASA
192.168.101.2 is the primary FW (and the default gateway for servers, I have to access through the VPN)
10.10.101.0/24 is the VPN IP range (this can be what you want, I'm not married to it somehow)
My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x or service server (tried RDP, telnet, ping, etc.)
Configuration file is attached.
Help pretty please!
Thank you.
Did you add a route for the VPN Pool on the main firewall to the ASA?
Best regards
Peer
Sent by Cisco Support technique iPad App
-
Unable to connect to the Cisco VPN you use native client: El Capitan
I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."
When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:
* connect using the old work VPN connection: without success
Config: Hand [server address, account name],
AUTH settings [shared secret, the Group name].
Advanced [mode to use the passive FTP = TRUE]
errors:
"authd [124]: copy_rights: _server_authorize failed.
"raccoon [2580]: could not send message vpn_control: Broken pipe"
...
* Add new VPN connection using L2TP over IPSec: without success
Config: Hand [server address, account name],
Authentication settings [user authentication: password, identification of the Machine: Shared Secret].
Advanced [send all traffic on the VPN = TRUE]
errsors:
"pppd [2616]: password not found in the system keychain.
"authd [124]: copy_rights: _server_authorize failed.
...
* Add new connection using Cisco via IPSec VPN: without success
Main config: [server address, account name].
AUTH settings [shared secret, the Group name].
Advanced [mode to use the passive FTP = TRUE]
errors:
"authd [124]: copy_rights: _server_authorize failed.
"raccoon [2580]: could not send message vpn_control: Broken pipe"
VPN server is high and does not work and accepts connections, this problem is entirely on the client side.
I. Journal of Console app existing/Legacy VPN connection:
26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics
26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]
26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status
26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.
26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.
26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.
26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 339 [2580]: connection.
26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0
26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2
26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.
26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 405 [2580]: connection.
26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).
26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0
26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0
26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).
26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).
26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.
26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.
26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.
[26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting
26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).
26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe
26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe
[26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no
26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP
$VPN_SERVER_IP
II. new VPN connection using L2TP over IPSec Console app log:
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.
26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856
26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856
26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13
26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent
26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}
26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}
26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]
26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status
26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory
26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]
26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller
26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller
26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.
26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.
26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain
26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!
26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!
26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501
26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback
26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback
26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed
26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify
III. New connection of Cisco VPN through IPSec Console app log:
26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f
26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f
[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]
[26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status
26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.
26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed
26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.
26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.
26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 296 [2576]: connection.
26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status
26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0
26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2
26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.
26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP
26/03/16 10:19:56, 374 raccoon [2576]: connection.
26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).
26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).
26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us
26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0
26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0
26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).
26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer
26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).
26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).
26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).
26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).
26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).
26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.
26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.
26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.
[26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting
26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).
26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).
26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe
26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe
[26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no
26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".
26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP
26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP
It seems that I solved the problem, but I'm not sure it helped.
After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.
-
windows\system32\vsinit.dll
I try to run CISCO "VPN Client" connect from my PC at home for my work PC.
Then, I get a message:
Validation failed for C:\WINDOWS\System32\VSINIT.dll
Any ideas?
Martin
Hello
Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747
Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)
If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro
-
error 28000 removing the cisco vpn
When I try to remove the software vpn cisco to my windows xp pro, I get error 28000 say failed to install before the removal of the existing version.it is the only vpn on my pc. I tried several times but to no avail.
I went to the window registry local machine, then soft and deleted the cisco vpn software. but it does not work.
any help will be grateful?Hello alsky95,
I do not know what records you remove to uninstall the software, I suggest you to follow the article which you will give information on how to uninstall manually below and upgrade the Cisco VPN Client I found on Cisco's Web site:
http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_tech_note09186a0080094b7f.shtml
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows
Thank you
Irfan H, Engineer Support Microsoft Answers -
I have only a hotmailadress. IWant to send e-mail to an office.
Please can tell me how I can get anotter mailadress?
If you do not use a hotmail address, then you must sign up with a service provider (your ISP will probably be fine) get an another e-mail address that is provided by the ISP. To do this, you probably have to call your ISP to register and get the instructions of installation appropriate for your email account (and possibly use their program access online if they offer or use Windows Mail or Windows Live Mail to send and receive e-mails, then again). Unless you want a yahoo or grmail or other type of account such as hotmail or msn, then the new e-mail service can cost you an extra monthly cost (although most ISP plans come with the e-mail as part of their plan - free mine comes with the ability to make up to 5 different email accounts using their identification). What plan you choose is up to you. I don't know why you need a new address in the first place - but it's up to you (there is nothing wrong with hotmail, but I assume that because it is free, it doesn't "look like" also good one from a different and private source).
The result is that you need to contact another e-mail provider (or you can even get another hotmail e-mail address if you want to) and register, obtain the appropriate settings, wait however long it takes to create your account (it shouldn't be long) and then you have a new e-mail address to use. Most e-mail programs (you don't say what you use) have the ability to merge or show several different accounts at the same time, so that shouldn't be a problem.
Here is a search engine Bing on "e-mail service providers" which should give you a start if you do not use one from your ISP (or they do not offer this service):http://www.bing.com/search?q=e-mail%20account%20providers&mkt=en-us&FORM=TOOLBR&DI=6244&CE=14.0&CM=SearchWeb.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Hello: Previously, I had firefox 38 and was using an older version of the classic theme restaurateur v1.2.9.6 and I have no problem see the tabs colorful. Unfortunately, given that the upgrade to firefox 39 and classic theme restaurateur v1.3.5 only
-
You tube gel 1/2 way through videos. This just started happening.
You tube videos over 5 minutes lock up half way through. I don't get the rotation arrow, nothing happens at all. If I close the application and restart the same thing is happening, short videos will play through. I have the last version of Adsobr acc
-
I closed my file/edit/view etc. and the address bar, and now there is no way to open them again to the top. No way to access internet tools, etc.. Whenever I right-click anywhere (the same thing I did to close) I get options for tabs (as I am clickin
-
processor and motherboard too hot!
Help, please! I recently bought a HP Pavilion Sleekbook 14-b065tx. It came with the BACK. So I installed win 8.1 on it. everything works quickly and smooth that I love him. but I have istalled speccy and checked the temprature, that I'm typing this,
-
My ipad cannot find my printer?
Hello I have an officejet 6500 a printer, I use to be able to air print from my Ipad now I can't have my Ipad says cant find printer please help.