Is there really a customer Cisco VPN for Linux? _Really? _

Hello people,

I finally after almost a brain aneurysm trying to think too hard I have my Cisco 881 - SEC - K9 router configured properly for a multi-point my Amazon Virtual Private Cloud IPSec VPN tunnel, so that the obstacle is finally spent, and I think that it has been a very important step in my life somehow. I never thought I'd see the day, I actually got my hands on a legitimate Cisco non - stink... uh... I mean, non-linksys router. Now I can't find a "client" VPN for Linux program. I am running a Xen Hypervisor environment on openSUSE Linux because it is the only Linux distribution that fills all my laborious requirements in a Linux server environment. It is also the most mature and sure Linux on this planet, making it the most significant Linux distribution for my research needs. Using NetworkManager is not really an option for a Linux based server environment and OpenVPN is just too complicated to understand for my little tiny head. I've heard of some mysterious "easy VPN", but after that hours of digging online there is no information on this subject, even the Cisco download link leads to a Page not found error. I see a Linux VPN API for the AnyConnect program, but is it a real VPN client, or just an API? It seems to want my money to download it, but I have no money nor I really know what it is because it's all closed, the secret-like source and I can not even find a simple README file on him explaining what it is exactly. I'm just a developer of off-work software attempts to connect to my home for personal use router and I can not really afford to more than $ 1 million for a single program I will only need to download once in my life that should have been included with the router in the first place of the fork. I have that more volunteer will probably not yet able to understand how to use the program when even because I don't know anything about VPN connections, that's why I bought this router so I can try to figure it all out as part of the open source nonprofit, research, I am currently conducting. Is there some sort of period of evaluation or trial for personal use? Which would be really good if I could at least know if I will be able to understand or not. I hate throwing money when it is in such a shortage these days. Is there really no alternative to a Cisco router. It is an absolute necessity for the things I'm trying to accomplish, so try to settle for something else and past with my life isn't really an option. No, it's something that I just need to raise its head on and finish.

I may be a little too crazy in me for my own good, but I don't see why it should take so much money just to learn to do something for personal use, it is not really a skill that I would never use otherwise. Wouldn't be great if Cisco did their VPN client open-source and free for the public to use and modify, improve, learn and to grow and bring the whole world together in a community? Even the source code to the discontinuous old Cisco VPN client could be used as a tool for learning valuable for some poor student hungry or developer of Open Source software somewhere trying to cope with Sauce and Ramen noodles noodles Ramen on toast (don't tell me you've never thought about it). With the ripple effect, it would significantly improve sales over time, because it would open the door to a whole new market where could those who previously could not afford to participate now. That's the real power of Open Source. It creates a more skilled workforce for the future by contributing openly and share knowledge. What happens if the next big internet technology and the solution to the global tyranny - the solution to end all wars forever - locked in the mind of a software developer to unemployment, which could not afford to upgrade their software to router from cisco or access the software they need because he was source closed and required engage in a costly to download service contract? It would be just terrible, wouldn't it? I guess there is no way to ever know for sure. I guess I'd be as happy if a kind soul out there could tell me an alternative easy to use for one always on the VPN connection that is running in the background that does not require NetworkManager or having to spend days days searching in and trying to figure out some really poor or extremely complex documents? I apologize for all the sentences run on posed as a question, but just a few serious mental exhaustion of this, being unemployed is a few people from hard work. I really could use a vacation. Maybe a camping on the coast trip is in order after I get this job, that sounds nice, isn't it? Nothing like a summer storm on the beach to the ocean--away from technology - to refresh the mind.

I won't step in all the discussions in there, but you might want to look into is vpnc and openconnect.

The two opensource projects that seem to work with devices Cisco, for a long time, I've been a user of vpnc.

http://www.infradead.org/openconnect/

http://www.UNIX-AG.uni-kl.de/~Massar/vpnc/

Looks like some of your questions, concerns should be directed to your Cisco rep.

There is an AC for Linux client (component the GUI and CLI). If you have problems finding - get it from 'package' (for linux) file, which is essentially a zip.

Tags: Cisco Security

Similar Questions

Error of customer Cisco VPN connection ASA 5505

I am unable to connect to the vpn I created on my ASA 5505 using the Cisco VPN Client on a Windows machine. The log of the vpn client and the config of the ASA 5505 is lower. Any help to solve this is appreciated.

CISCO VPN CLIENT LOG

Cisco Systems VPN Client Version 5.0.06.0160

Copyright (C) 1998-2009 Cisco Systems, Inc.. All rights reserved.

Customer type: Windows, Windows NT

Running: 6.1.7600

Config files directory: C:\Program Cisco Systems Client\

1 09:34:23.030 13/04/11 Sev = Info/4 CM / 0 x 63100002

Start the login process

2 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100004

Establish a secure connection

3 09:34:23.061 13/04/11 Sev = Info/4 CM / 0 x 63100024

Attempt to connect with the server "71.xx.xx.253".

4 09:34:23.061 13/04/11 Sev = Info/6 IKE/0x6300003B

Attempts to establish a connection with 71.xx.xx.253.

5 09:34:23.061 13/04/11 Sev = Info/4 IKE / 0 x 63000001

From IKE Phase 1 negotiation

6 09:34:23.077 13/04/11 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 71.xx.xx.253

7 09:34:23.170 13/04/11 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = 71.xx.xx.253

8 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

9 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

Peer is a compatible peer Cisco-Unity

10 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

Peer supports XAUTH

11 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

Peer supports the DPD

12 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

Peer supports NAT - T

13 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000001

Peer supports fragmentation IKE payloads

14 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000001

IOS Vendor ID successful construction

15 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000013

SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) at 71.xx.xx.253

16 09:34:23.170 13/04/11 Sev = Info/6 IKE / 0 x 63000055

Sent a keepalive on the IPSec Security Association

17 09:34:23.170 13/04/11 Sev = Info/4 IKE / 0 x 63000083

IKE port in use - Local Port = 0xEB07, Remote Port = 0 x 1194

18 09:34:23.170 13/04/11 Sev = Info/5 IKE / 0 x 63000072

Automatic NAT detection status:

Remote endpoint is NOT behind a NAT device

This effect is behind a NAT device

19 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

20 09:34:23.170 13/04/11 Sev = Info/4 CM/0x6310000E

ITS established Phase 1. 1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

21 09:34:23.186 13/04/11 Sev = Info/5 IKE/0x6300005E

Customer address a request from firewall to hub

22 09:34:23.186 13/04/11 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to 71.xx.xx.253

23 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = 71.xx.xx.253

24 09:34:23.248 13/04/11 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

25 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 172.26.6.1

26 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.0.0

27 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 172.26.0.250

28 09:34:23.248 13/04/11 Sev = Info/5 IKE / 0 x 63000010

MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 172.26.0.251

29 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000000

30 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = TLCUSA

31 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

32 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000E

MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (1) built by manufacturers on Wednesday 5 May 09 22:45

33 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

34 09:34:23.248 13/04/11 Sev = Info/5 IKE/0x6300000D

MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194

35 09:34:23.248 13/04/11 Sev = Info/4 CM / 0 x 63100019

Data in mode Config received

36 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000056

Received a request from key driver: local IP = 172.26.6.1, GW IP = 71.xx.xx.253, Remote IP = 0.0.0.0

37 09:34:23.264 13/04/11 Sev = Info/4 IKE / 0 x 63000013

SEND to > QM ISAKMP OAK * (HASH, SA, NO, ID, ID) to 71.xx.xx.253

38 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = 71.xx.xx.253

39 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

40 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000045

Answering MACHINE-LIFE notify has value of 86400 seconds

41 09:34:23.326 13/04/11 Sev = Info/5 IKE / 0 x 63000047

This AA is already living from 0 seconds, setting the expiration to 86400 seconds right now

42 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = 71.xx.xx.253

43 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

44 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000013

SEND to > ISAKMP OAK INFO *(HASH, DEL) to 71.xx.xx.253

45 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000049

IPsec security association negotiation made scrapped, MsgID = 89EE7032

46 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000017

Marking of IKE SA delete (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED

47 09:34:23.326 13/04/11 Sev = Info/5 IKE/0x6300002F

Received packet of ISAKMP: peer = 71.xx.xx.253

48 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000058

Received an ISAKMP for a SA message no assets, I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8

49 09:34:23.326 13/04/11 Sev = Info/4 IKE / 0 x 63000014

RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">

50 09:34:26.696 13/04/11 Sev = Info/4 IKE/0x6300004B

IKE negotiation to throw HIS (I_Cookie = 2617522400DC1763 R_Cookie = 029325381036CCD8) reason = DEL_REASON_IKE_NEG_FAILED

51 09:34:26.696 13/04/11 Sev = Info/4 CM / 0 x 63100012

ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED". Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

52 09:34:26.696 13/04/11 Sev = Info/5 CM / 0 x 63100025

Initializing CVPNDrv

53 09:34:26.696 13/04/11 Sev = Info/6 CM / 0 x 63100046

Set indicator established tunnel to register to 0.

54 09:34:26.696 13/04/11 Sev = Info/4 IKE / 0 x 63000001

Signal received IKE to complete the VPN connection

----------------------------------------------------------------------------------------

ASA 5505 CONFIG

: Saved

:

ASA Version 8.2 (1)

!

ciscoasa hostname

domain masociete.com

activate tdkuTUSh53d2MT6B encrypted password

2KFQnbNIdI.2KYOU encrypted passwd

names of

!

interface Vlan1

nameif inside

security-level 100

IP 172.26.0.252 255.255.0.0

!

interface Vlan2

nameif outside

security-level 0

IP address 71.xx.xx.253 255.255.255.240

!

interface Ethernet0/0

switchport access vlan 2

Speed 100

full duplex

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

passive FTP mode

clock timezone IS - 5

clock to summer time EDT recurring

DNS server-group DefaultDNS

domain masociete.com

access-list LIMU_Split_Tunnel_List note the network of the company behind the ASA

Standard access list LIMU_Split_Tunnel_List allow 172.26.0.0 255.255.0.0

outside_access_in list extended access permit icmp any one

outside_access_in list extended access udp allowed any any eq 4500

outside_access_in list extended access udp allowed any any eq isakmp

outside_access_in list extended access permit tcp any host 71.xx.xxx.251 eq ftp

outside_access_in list extended access permit tcp any host 71.xx.xxx.244 eq 3389

inside_outbound_nat0_acl list of allowed ip extended access all 172.26.5.192 255.255.255.240

inside_outbound_nat0_acl list of allowed ip extended access all 172.26.6.0 255.255.255.128

pager lines 24

Enable logging

asdm of logging of information

Outside 1500 MTU

Within 1500 MTU

local pool VPN_POOL 172.26.6.1 - 172.26.6.100 255.255.0.0 IP mask

ICMP unreachable rate-limit 1 burst-size 1

enable ASDM history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_outbound_nat0_acl

NAT (inside) 1 0.0.0.0 0.0.0.0

static (inside, outside) 71.xx.xxx.251 172.26.5.9 netmask 255.255.255.255

static (inside, outside) 71.xx.xxx.244 172.26.0.136 netmask 255.255.255.255

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 71.xx.xxx.241 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

dynamic-access-policy-registration DfltAccessPolicy

GANYMEDE + Protocol Ganymede + AAA-server

RADIUS Protocol RADIUS AAA server

Enable http server

http 172.26.0.0 255.255.0.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5

Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5

Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5

map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

md5 hash

Group 2

life 86400

crypto ISAKMP policy 30

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH timeout 5

Console timeout 0

dhcpd outside auto_config

!

no basic threat threat detection

no statistical access list - a threat detection

no statistical threat detection tcp-interception

WebVPN

internal DefaultRAGroup group strategy

attributes of Group Policy DefaultRAGroup

value of server WINS 172.26.0.250 172.26.0.251

value of 172.26.0.250 DNS server 172.26.0.251

Protocol-tunnel-VPN IPSec l2tp ipsec svc

value by default-field TLCUSA

internal LIMUVPNPOL1 group policy

LIMUVPNPOL1 group policy attributes

value of 172.26.0.250 DNS server 172.26.0.251

VPN-idle-timeout 30

Protocol-tunnel-VPN IPSec l2tp ipsec

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list LIMU_Split_Tunnel_List

the address value VPN_POOL pools

internal TLCVPNGROUP group policy

TLCVPNGROUP group policy attributes

value of 172.26.0.250 DNS server 172.26.0.251

Protocol-tunnel-VPN IPSec l2tp ipsec svc

Re-xauth disable

enable IPSec-udp

value by default-field TLCUSA

barry.julien YCkQv7rLwCSNRqra06 + QXg password user name is nt encrypted privilege 0

username barry.julien attributes

VPN-group-policy TLCVPNGROUP

Protocol-tunnel-VPN IPSec l2tp ipsec

bjulien bhKBinDUWhYqGbP4 encrypted password username

username bjulien attributes

VPN-group-policy TLCVPNGROUP

attributes global-tunnel-group DefaultRAGroup

address VPN_POOL pool

Group Policy - by default-DefaultRAGroup

IPSec-attributes tunnel-group DefaultRAGroup

pre-shared-key *.

tunnel-group DefaultRAGroup ppp-attributes

no authentication ms-chap-v1

ms-chap-v2 authentication

type tunnel-group TLCVPNGROUP remote access

attributes global-tunnel-group TLCVPNGROUP

address VPN_POOL pool

Group Policy - by default-TLCVPNGROUP

IPSec-attributes tunnel-group TLCVPNGROUP

pre-shared-key *.

ISAKMP ikev1-user authentication no

tunnel-group TLCVPNGROUP ppp-attributes

PAP Authentication

ms-chap-v2 authentication

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

!

global service-policy global_policy

context of prompt hostname

Cryptochecksum:b94898c163c59cee6c143943ba87e8a4

: end

enable ASDM history

can you try to change the transformation of dynamic value ESP-3DES-SHA map.

for example

remove the encryption scheme dynamic-map outside_dyn_map 20 transform-set TRANS_ESP_3DES_MD5

and replace with

Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

Connection of customer Cisco VPN to work

I recently picked up 1 billion domestic 7800N router to replace my old netgear which fell signal much.

I seem to have some access to my work via VPN client network problem. I can't connect the Cisco VPN client to the network ok but I have no access to the email server and exchange. I tested the parameters of the client on my old Netgear and it works fine. That tells me that the management of the router...

I don't have any packet filtering on and I put in place profile of my fixed ip of internal House on the ip of the work to allow any protocol and any port.

I also sent port 500, 4500 and internal 10000UDP to my ip address.

I'm a noob when it comes to networking and I'm a little lost. I feel this topic falls in the middle ground between the client and the seup router if I appreciate draw my having a definitive answer. I can post a copy of the customer logs if this is useful.

I hope someone can point me in the right direction...

Thank you

Neil

Hello

It looks like your home network is using the same ip as your work network range. I recommend you to choose a new range for your home network that is not identified in the routing table updates in your newspapers.

For example: 10.255.255.0/24

Best regards

Ju

Sent by Cisco Support technique iPad App

Customer Cisco VPN through PIX

I have a PIX 501. I would use the Cisco VPN Client through the PIX to connect to a PIX on another site. The client will connect, but there is no traffic through the connection. What can I do?

On the remote PEER PIX, add the following line.

ISAKMP nat-traversal 20

sincerely

Patrick

Customer Cisco VPN not prompt to change the password when the Radius ID is due has expired.

Hello, I would like to know what is behind a Cisco VPN client software to the user PC invites not to change the password when their password ID RADIUS is expiring/expired. I would also like to know what is the solution to work around him. Thanks in advance.

Hello

The "password management" command is configured?

For the password function - expires to work in conjunction with the ray, that's all you need on the SAA.

Let me know.

Thank you.

Help: Customer Cisco VPN & Split Tunnel but not Internet

Hi Forum.

We are faced with this problem: after having successfully open a VPN connection with the Cisco VPN Client to a router Cisco, the rest of the world are not properly available more.

This is what has been verified / so far attempted to identify the problem on a Windows Vista computer:

-Router: Split Tunneling is allowed according to sysop

-On the VPN-Client: "allow Local Lan access" is checked

-On the Client (statistics): only STI VPN-rout configured listed unter "guarantee routes." "Local Lan routes" is empty.

-Calling 'http://www.google.com' in IE fails

-Call ' 74.125.232.116' (IE IP) IE works / ping the IP works.

-nslookup properly lists the current DNS server

-nslookup www.google.com resolves correctly the name of intellectual property

It seems that it is not that the connection with the rest of the Internet is deleted, but DNS resolution fails somehow, even though all signs point to the appropriate DNS server is in force and although the command line can resolve the name.

does anyone have a tip how to debug this correctly?

No worries Pat...

Sent by Cisco Support technique iPhone App

-Please evaluate solutions

Client AnyConnect vpn for linux

Hello

I try to use the anyconnect for linux client vpn.

My connection is through a proxy with NTLM authentication.

Is it possible to do this?

I have found no information on.

Thanks in advance

Silk,

Not-so-good news:

http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsg77160

Unfortuately the business unit has never sees fit to include this feature.

But you can conntact consider you the team to discuss the issue.

Marcin

This allows the customer Cisco VPN through PIX

Hello. I seeks to allow the client VPN Cisco of LAN of the company to remote resources.

It's put PAT in place on the PIX and I'll add the following lines to the ACL in the inside interface to allow access to the customer:

permit tcp x.x.x.x y.y.y.y eq 50

permit tcp x.x.x.x y.y.y.y eq 51

permit udp x.x.x.x y.y.y.y eq 500

permit udp x.x.x.x y.y.y.y eq 4500

I have not done something like this before so I don't know if that will be enough to allow the connection of the client to remote resources.

I have to do something else to make it work?

That should be good for the local pix, but make sure that nat-traversal is enabled on the remote device.

ESP and ah protocols, not ports. 50 and 51.

esp x.x.x.x y.y.y.y permit

allowed ah x.x.x.x y.y.y.y

permit udp x.x.x.x y.y.y.y eq 500

permit udp x.x.x.x y.y.y.y eq 4500

authentication 802. 1 x on cisco VPN for remote access

I'm on dial-up VPN (mobile VPN) on cisco ASA5510, now, I want to authenticate remote users via Microsoft IAS (Radius Standard) service. However, I couldn't get through the via protocol PEAP authentication process, and it seems that it only supports PAP that isn't safe.

Any suggestion on how to implement PEAP over VPN remote access?

Thank you

Hello

Glance atv http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml

It may be useful.

Best regards.

Massimiliano.

is there a directory/tmp or similar for linux on a blackberry?

Hi all

I would like to store temporary files and do not know if there is a temporary directory that I could use?

Thank you for your help.

In memory of the blackberry device there is no FAT, FAT32 file system, NTFS etc.

The device memory BlackBerry is like a big hash table.

I recommend look at Blackberry Developer's Guide (there are 2 parts books).

It can be downloaded here:

The app developer's Guide. Part 1

The app developer's Guide. Part 2

Check part 2. There is information how to work with persistent memory.

Using Cisco VPN with desktop remotely

Hi, I work with many customers that use Cisco VPN for remote access. Unfortunately the Cisco VPN does not work well with my VPN IBM client so I can't have both running on my computer. So, I thought that I would like to install the Cisco VPN on an old machine, connect to this computer via desktop to distance and VPN in the network from the customer via the VPN.

Well, who does not work either. As soon as I connect to the network via the VPN Remote Desktop client loses the connection. Can someone tell me if it works as designed (WAD) or if there is a secret of configuration to operate?

Thanks in advance...

John,

When you connect via VPN to the network client on the remote computer, the connection RD proper case?

I think it's because the VPN connection that you have drawn on the client computer is configured to encrypt all traffic, and that's why the RD connection to your computer of the drops.

You can do a quick test... on the VPN client computer under statististics (VPN software) verification and check if secure roads is 0.0.0.0 (no split tunneling).

If Yes... and if having access to the VPN server, which can be changed.

Federico.

SafeNet and Cisco VPN Client Compatible?

I have been using the Cisco VPN for quite awhile with no problems. Recently, we have added a Watchguard Firebox somewhere else and have installed the Client of Watchguard MUVPN, otherwise known as a customer of Safenet.

Since the installation, I could not yet properly use the Cisco Client. If I disable the two Services of Safenet, I invited to my user id and password and connect to the Cisco Concentrator and get an ip, etc. However, I can't ping anything on the network.

My solution is to completely uninstall both clients and reinstall the Cisco by itself. This is not very practical.

If anyone know a fix for this I'd appreciate comments.

Thank you

Patrick Dunnigan

Hi Patrick,

I only got lucky with the SafeNet customer brand Watchguard with the 4.0.x releases of the Cisco client. I think Cisco 4.6 clients use a newer driver from the DNE or else that plays well with SafeNet.

In any case, here's how to set up PC that requires both clients:

First, install the Cisco VPN client. Restart the application, and then stop and disable the Windows service.

Install the client for Watchguard, reboot as requested.

Then, stop and set to manual both SafeNet services, then start and set to automatic the Cisco service.

Delete the shortcut in your Start menu Startup group safecfg.exe (or the key of HKLM\MS\Windows\CurrentVer\Run, where he gets set.)

Delete the shortcut to start for the Cisco VPN client as well.

Whenever you want to use the Cisco customer, you can just launch the Dialer to IPSec. If you want to run the SafeNet client, stop the Cisco service, start the services of SafeNet, then run safecfg.exe. A few batch files facilitate this process for users.

Hope that helps,

Chris

VMware discover 5 support for linux/ubuntu comments?

Dear Sirs
Is there an agent yet for linux especially Ubuntu 10.04 LTS. With the Android development picking up speed, we have a real need to have our developers. The main thing that is necessary for us is the USB redirection to the prompt of the client running XP/Windows 7 or even a thin client for them to download cores to our material connected to the customer. Thanks in advance, if anyone knows of other solutions, it would be really appreciated.

Are you talking about Office VDI or on the side of client to end-users.

There is a VMware View Client for Linux, this will allow Linux machines to connect to a broker and load a Windows VDI image.

However it is not a VMware View Agent for Linux that allow a remote desktop Linux to be negotiated through the infrastructure of the view to a device from end user customers.

There are rumors of people for the agent Windows runs under Linux using wine and Rdesktop but no one seems to have posted a shot-by-shot full of way to account and then that would be completely supported the point of view of VMware.

Dreamweaver for Linux?

I wonder if adobe has released a version of dreamweaver for Linux?
I'm gona leave windows but web developer I'am I did a lot of web sites using dreamweaver like this
http://wiki2download.com/
Before leaving windows, I need to know if there is no version of dreamweaver for Linux

There is, finally, I have checked, no installers or RPMs who will install a version of Win of the DW on Linux. I've heard rumors of people installing DW on a dual-boot Win / * nix and then copy the file Win DW bias and do that elsewhere, but of what I I remember was HUGE in the you-know-what do pain, and even then, he had problems.

There is no version of Linux, DW. Nor, I believe, all planned out a. Finally, I have checked.

^_^

Configuration of Cisco for Cisco VPN Client ASA 5505

Our firm has finally made the move from Sonicwall Cisco for our SMB customers. Got our first customer with a VPN site-to site solid and you have configured the main router for connections via the Cisco VPN Client VPN Wizard.

When I install the VPN Client on desktop computers that does not capture all the necessary options (unless you have a SSL VPN). I guess that there is a process that I am missing to export a connection profile that Cisco VPN Client users can import for their connection.

There step by step guides to create the connection profile file to distribute to customers?

Hello

The ASDM wizard is for the configuration on the SAA. This wizard will help you complete the VPN configuration on the end of the ASA.

You will need to set the same in the client, so that they can negotiate and connect.

Input connection in the client field, that's what you want to be seen that on the VPN client - it can be any name

Host will be the external ip address of the ASA.

Group options:

name - same tunnel as defined on the ASA group
Password - pre-shared as on ASA.

Confirm password - same pre-shared key.

Once this is over, you will see the customer having an entry same as a login entry. You must click on connect there. He will be a guest user and the password. Please enter the login crendentials. VPN connects.

You can distribute the .pcf file that is formed at the place mentioned in the post above. Once the other client receive the .pcf, they need to import it by clicking this tab on the VPN client.

Kind regards

Anisha

Is there really a customer Cisco VPN for Linux? _Really? _

Similar Questions

Maybe you are looking for