PLEASE READ THE LAST POST EVEN IF THE SOLUTION IS ACCEPTED!

Similar Questions

• install only a winxp.trying so that i receive bluescreen error.please give the solution

  I'm already installed win vista for my compaq cq60-104tu laptop.now I install only a winxp.trying so that i receive bluescreen error.please give the solution

  Hello

  It would be better if you provide the exact error message, but you can try the following procedure:

  http://h10025.www1.HP.com/ewfrf/wc/genericSoftwareDownloadIndex?softwareitem=ob-54270-1 & CC = US & LC = on & DLC = in & DLC = in & lang =

  Kind regards

  Mohammed Mukram

• while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  while I connect to my computer with the samsung wave y kies wi - fi computer displays an error as a peripheral denied connection permission, please provide the solution.

  earlier, I used internet and transfer files through this link, but now it is showing the device refused permission. I have checked all the settings, but could not remedy any problem so kindly help me so that I can connect via wifi to my mobile samsung kies.

  Also, I am facing problem in sending files via Bluetooth, and at the same time my mobile can easily transfer the file and the music file actions with my computer via bluetooth which I did not understand.

  Rental offer the solution to both problems. In my computer I have window7 profeessional.

  Marie-Odile THE

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer before the show?

  Reinstalling the Kies application and check if it helps.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I also suggest you to contact Samsung and check: http://www.samsung.com/us/support/

  Regarding Bluetooth check out these links:
  

  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Bluetooth devices do not work correctly on a computer that is running Windows 7:

  http://support.Microsoft.com/kb/980396

  Also see this link: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Note: The article mentioned above is also applicable to Windows 7.

  I hope this helps!

• Atrix: Failed to upgrade (Please read the original post before answering)

  If you have snapped or changed your phone and you are on the Version of the system 4.1.26., 4.1.51 or 4.1.52 you can get an official version. Please see this post before responding:

  Post here if:

  You are currently on the Version(Menu > Settings > About Phone > System Version) 4.1.57 system and you are unable to upgrade to the next version.

  • Indicate what you saw when it failed.
  • Current state of what you see now
  • All that you have done on the phone to change the phone
  • What you have done since it failed
  • If you get the Android recovery screen Triangle with! in it and Android. Press on in the lower right corner and report any error messages see you.
  • Make sure that your forum profile has the most up to date 15-digit IMEI.

  Do not Post here if:

  • You received the notification
  • You have not yet received the notification
  • The update succeeded
  • You have comments after the upgrade is complete
  • You have any questions about the trial
  • All that is off-topic. It will be deleted.

  Thank you for your cooperation

  Mark

  Support Forums Manager

  
  

• How to kill 10 Windows upgrade? Please read the details before you answer!

  Normally I just will try to contact Microsoft directly about this. I don't care if it takes 2 weeks to reply to an email that I GET a response. But EACH link that says "Contact us" brings me right back to the main page of Community Office helps, it seems there is no chance whatsoever to get feedback from a real person from Microsoft...

  So here's my situation: I have two laptops. My only primary is more recent and therefore runs Windows 10. My portable secondary works in Windows 7. I want to KEEP my school laptop running Windows 7 for two reasons:

  1. My portable secondary is several years old. I do not if it is "technically compatible with Windows 10" because age alone means there will be some conflicts of hardware/software, if I were to upgrade the operating system. It's not worth updating this machine.
  2. Program compatibility. I have several programs use this work beautifully on Windows 7 but you are clumsy (if they even run at ALL) on Windows 10. Until such programs get the upgrades themselves, the ONLY way I can use them is on my Windows 7 laptop. So if I update the laptop more old I lose these programs.

  For this reason, I want to get rid of the annoying pop up telling me that I "need to upgrade to Windows 10 now" every time I turn on my secondary laptop. I have it? I want this program went pop up! Finished! Exterminated! Eliminated! Try to remove the program files has failed, because apparently I need fancy Microsoft permission to remove them. (A fool can accidentally delete vital BONES files when you are prompted to do so by a troll, but I can not intentionally remove a useless update command prompt!) So there does anyone know how to get rid of this nuisance?

  PS - If someone from Microsoft DOES happen to read this I have a suggestion for you: some people do not WANT your glorious new version of Windows has pushed down their throat then maybe consider to include an option to unsubscribe!

  It is a sure and very effective tool to stop Windows 10 upgrade notice.

  GWX Control Panel

  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html

• Please read, the issues of Windows Media Center EPG

  What is the current status of the problems with downloading the Guide EPG/program for Windows Media Center?

  I've heard from the right inside Microsoft person (who was on holidays) and he is now aware of the reported problem. It is transmission of information from here and connect to the team of the EPG.

• I want to cancel my monthly purchase!  He cannot work in Korea. always "error!" Please give the solution!

  Please, I beg you! As soon as possible!!!

  413 header length too large:

  Try to clear the cache of your browser, or use a different browser altogether.

• Compaq presario CQ57 339wm: compaq presario CQ57 339wm - need administrator password or unable to read the password 51610908 in operation

  HI - after three attempts the password it says disabled system 51610908. Anyone know the power on password?

  Hello:

  Please read the first post on the link below for what to do with the system off (halt) code given by the PC.

  http://h30434.www3.HP.com/T5/notebook-operating-Sy...

• 2D, legend, chart error bar XY, Multi draw help? Please modify the VI

  Please READ THE ENTIRE POST and HELP!

  Please help with this VI and make an instructive example for me and other novices like me who come through this typical example.

  A typical problem of tracing data is the following: on the SAME plot (y axis = Amplitude axis x = time), draw curves Amp1, Amp2, Amp3,... from sample1, sample2, Sample3,...

  In addition, it is a mistake1, Error2, Error3,... associated with Amp1, Amp2, Amp3,..., which must also be traced. In order to distinguish between these curves, we can use different

  colors and show a legend that reads Amp1 (i.e. black), Amp2 (say red) and Amp3 (green for example). Then, the plot becomes complete and transmitting data very conveniently.

  The attached VI made an attempt to trace Amp1 and Amp2 helps chart XY and 2D plot of error bar (to display error bars). There is a slight problem. The legend does not show what it is assumed

  to show. Can someone solve this? If I draw two curves, the caption should show Amp1 Amp2, that if I drew three curves, the caption should show Amp1 Amp2, Amp3 and so on.

  I don't want to see the default plot 0, draw 1 or whatever. Also, it would be nice to dynamically control the symbol, the color, the style of curve etc as we continue adding more curves in the plot.

  Once this problem is solved, I know that I can easily extend to draw more accurate curves two dynamically. I could use for loops with shift registers, etc. to draw any number of curves on a single parcel.

  Believe me, I searched for other positions and could not find a simple example like the one I posted here. I found a lot of examples have confused me more that helped me.

  I believe that if this problem is solved in a simple way, many will find this informative example. So by helping me, you help a lot of other people as well!

  Thank you in advance. Please see the attached files (VI and an example of data file I created only)

  If you like graphic multiple curves (Y1, Y2, Y3, etc) with their respective error bars (Err1, Err2, Err3, etc.) on the same plot

  Use the error Bar Plot (aka 2D bar error) and want the legend to display (Curve1, Curve2 Curve3, etc. or all what you want to call it),.

  Please visit the following link:

  http://forums.NI.com/T5/LabVIEW/A-simple-challenge-error-bar-plot/TD-p/1986755

  For the use of XY graph, please check out the link in one of the posts above.

  Thanks to everyone who has contributed to this.

• DVD player doesn't read the Windows 7 restore disk

  Hello

  I just bought a Samsung NP350V5C-A02UK laptop and I'm having problems with the DVD player.

  It will read most discs that I put in it except the Samsung OS restore disc that came with it.

  I've also downloaded an iso file of Win7 (64 bit), and created an installation of this use of the DVD disc, but then the laptop could not check the disk.

  I have attached a USB DVD drive to the laptop and he could read the Samsung OK restore disc is one that makes me think of a problem with the DVD player.

  In Device Manager, the DVD drive is listed as:

  IDE\CDROMTSSTCORP_CDDVDW_SN-208BB___SC00___\4&32B8AC6E&0&0.1.0

  Can someone help before I have send the laptop return it for a refund?

  Hi Steven,

  The Microsoft Article available at the following link has a fixit and a full list of steps that allows us to solve the problems of software generated in a DVD player. Please read the information contained in this article, and see if the steps mentioned in it helps you to solve this problem:

  http://support.Microsoft.com/kb/982116

  Note: Certain steps of this article may result in changes to the Windows registry. Any incorrect changes to the registry could prove fatal. So, to be on the safe side, please take a backup of your registry in this article before you make changes to registry.

  If the steps in this article does not improve the situation, we have a high probability that the DVD drive has hardware problems. Since this is a new computer, I suggest you to contact Samsung support in this case. Samsung support would be the best point of contact for you to check your hardware. Here are the links for the Samsung support:

  http://www.Samsung.com/us/support/

  http://www.Samsung.com/us/support/contact

  Hope this information is helpful to you. Don't answer if you need help with Windows, we will be happy to help you.

• eFax - users please read

  As of April 16, 2015, we have posted a solution to this problem.   Please see the thread below for the solution:

  Restoration of eFax on your printer

  Thank you.

  Original post below.

  ==================

  We have identified a problem with the eFax service which is available on several of our printers.  The following printers are supported eFax:

  We are very pleased to announce an update that will restore the eFax service in printers Photosmart 7510/7515 and want 110/114.

  This update only restores the eFax features. It does not provide other benefits or improvements and should be applied to restore the eFax service.

  Please note:

  1. The update requires several steps.  Please read the operating instructions completely once before you start.
  2. Due to technical issues, this update must be installed via the process described in the instructions.

  You can find the instructions here: eFax Catering Service.

  If you have any questions or problems with this update, please refer to the contact HP support for help services listed in 'I have problems with the update. Contact HP for help? "section contact us.

  Or, you can continue to work with the support of the forum community. The conversation about this is moving here.

  Thank you for your patience as you wait for this update.

• MS, what IS the solution for the ERROR CODE of 0 x 80240437?

  Looks to me like PERSON DON'T know what the solution to the problem is YET many people say online the fault lies with the last update from Ms.

  I just got a NEW laptop Gateway (NE56R41u) and it comes with bloatware to/from Windows 8.  The store said I need to 21 updates, yet all say that it cannot load due to this error code.
  So if nobody seems to have a solution, should I just sit and fiddle while Rome burns?  My solution is to delete everything that needs updates for and find one comparable application/software other than comparable MS/MS.  To see all the complaints and problems that have been created by the said error tells me that maybe there is no control of the quality at the top when it comes to release updates or solve the error in a timely customs codes.  Some of us have businesses where these codes are an obstacle, perhaps even bad, but no one knows what to do.
  If there is an answer, of course, I'm going to see/read the solution for it.  I'll even write back and say "Alright, it works now!
  I will say that States out constantly updates without checking and adding more noise to its 'small box only enlarges the problem... ".
  It is MY FIRST point in this place and I am disappointed... later, people!

  method 2 worked for me. Thank you very much! Very grateful!

• My hard drive is not even read the disc (Dragon Age: Origins)

  Today I bought a new video game for PC (Dragon Age: Origins).
  After inserting the disc, I thought I could hear the drive reading the disc, but it kept stopping.

  This ended up in my computer not give me an error message saying that there is problem... it's almost as if he thinks that I have never inserted the disc.

  So I tried to run another game disc, and he managed to read the disc.

  Please help :(

  the required for the game is the following:

  OS: Windows XP (SP3) or Windows nice (SP1) or Windows 7
  Processor: Processor Intel Core 2 SINGLE 1.6 GHz or equivalent AMD Athlon 64 2/0 GHz processor or equivalent
  RAM: 1 GB (1.5 GB Vista and Windows 7)
  Disc drive: DVD ROM required
  Hard drive: 20 GB of disk space

  and I guess that video and sound are not the problem here.

  I'm not a 'computer' wiz or anything either, but after reading the label of my system, it seems that the requirements very well.
  they are here:

  OS: Windows Vista 64 - bit family Premium SP1
  Processor: Intel Core 2 Q6600 Quad-Core
  RAM: 4 GB DDR2
  Disk drive: Super multiformat DVD + RW DL with Labelflash
  HDD: 750 GB

  ... As you can see, taking me the time to post all this place really shows how frustrated I am... so please Helo me ASAP :(

  It is possible that you have a bad DVD drive.  Try it in another computer (a friend or relative) and if it didn't work for them either, you may have to contact the company for a replacement drive.  If it works on their computer and not yours, you may need an update of the firmware of your DVD player to make it compatible with the disc.  It is a rare event, but can happen.  You will need to go to the website where you made your computer and download the update of the firmware if available.

• MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  MediaPlayer 12 on Windows 7 laptop playing my DVD with the sound; MediaPlayer 11 Windows XP desktop reads the DVD even with no sound: WHY?

  Hello DebbieMarronYM,

  I suggest watching this thread where the poster had the same problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/have-image-but-no-sound-when-playing-DVDs-with/211a9bfa-5d94-4CE1-AE95-84307ffdf20a
  Mind post x which is currently marked as an answer a lot of different solutions that can be useful.

• Stop/Fix "Please insert the last disk of all selfextracting and click OK to continue.

  (With the help of Win 7 32 - bit update)

  I have not used a disk of 3.5 inches for many years.  In addition, I have not used any device (USB, CD or DVD) that has / had problems of "whole selfextracting.

  Also, AutoPlay was disabled on my system for years.

  That said, whenever I do a search of file/folder I get "Please insert the last disk of all selfextracting and click OK to continue.

  How can I be to determine:

  1. What causes the error message and/or
  2. How to stop it forever!

  Thanks for any thoughts or ideas!

  DennisCPA

  Don't know if you've discovered this done yet for you, but I would say it is your usb flash drive. It happens when he is out BEFORE you used the 'Safely remove' icon on the taskbar.

  If it is, then you must copy any information on the USB key to another location and format the USB. Then you can copy the info on it and you're right to go!

  This will continue to happen sometimes even though you have the properties/policies defined in a quick deletion. I got mine the value of the radio button performance and ALWAYS use the icon REMOVE safe in your taskbar. Once you find that your data will be corrupted if is not removed properly, even if the ssd is supposed to be "hot." If you have a usb key that has a light on it, wait for the light to STOP BLINKING before removing it. If you do not have a light on this issue, it is always advisable to wait a second or two after the popup window say you that it is save to remove your USB.

  See you soon

  Glenn